Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_class_init):
* gst/playback/gstplaybasebin.c: (set_subtitles_visible),
(set_active_source):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(setup_sinks), (playbin_set_subtitles_visible):
Make switching off of subtitles work. To avoid all kind of
problems with unlinking of the subtitle input, we just keep
the subtitle inputs linked as they are and tell textoverlay
not to render them. Fixes#373011.
Other subtitle switching issues (esp. when there are both
external and in-stream subtitles) remain. They'll be solved
in playbin2.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_init), (gst_queue_finalize),
(reset_rate_timer), (update_in_rates), (update_out_rates),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_chain), (gst_queue_loop):
Use separate timers for input and output rates.
Pause measuring the output rate when we block for more data.
See #503262.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (gst_queue_chain):
Pause the timer to measure the input rate when we block because the
queue is filled. See #503262.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (analyze_new_pad), (connect_pad):
Expose the right pad in the right place with the right element.
Original commit message from CVS:
* gst/playback/Makefile.am:
Group decodebin2 and uridecodebin into the same plugin so that they
can share the GEnumType.
* gst/playback/gstdecodebin2.c: (_gst_array_accumulator),
(_gst_select_accumulator), (gst_decode_bin_class_init),
(gst_decode_bin_init), (gst_decode_bin_autoplug_sort),
(gst_decode_bin_autoplug_select), (gst_decode_bin_autoplug_add),
(analyze_new_pad), (connect_pad), (gst_decode_bin_plugin_init):
Add signal to sort factories instead of the more awkward autoplug-select
signal.
Modify autoplug_select so that we can try, skip or expose the
autopluggin of an element on a pad.
* gst/playback/gstfactorylists.c: (compare_ranks),
(decoders_filter), (sinks_filter), (gst_factory_list_is_type),
(element_filter), (gst_factory_list_get_elements),
(gst_factory_list_debug), (gst_factory_list_filter):
* gst/playback/gstfactorylists.h:
Simplify the API, allow getting elements based on mask.
* gst/playback/gstplay-marshal.list:
Add some more marshallers.
* gst/playback/gstplaybin2.c: (init_group), (gst_play_bin_init),
(gst_play_bin_finalize), (pad_removed_cb), (autoplug_factories_cb),
(autoplug_select_cb), (activate_group):
Add support for managing non-raw sinks by providing a custom element and
sink list to decodebin2.
Try to plug non-raw sinks when decodebin2 using autoplug-select of
decodebin2.
* gst/playback/gstplaysink.c: (gen_video_chain), (gen_audio_chain),
(gst_play_sink_set_mode), (gst_play_sink_request_pad):
* gst/playback/gstplaysink.h:
Add support for raw and non-raw sinks.
Add support to force sinks selected by playbin2.
Don't plug raw converters for non-raw sinks.
* gst/playback/gsturidecodebin.c: (_gst_array_accumulator),
(_gst_select_accumulator), (gst_uri_decode_bin_class_init),
(proxy_autoplug_select_signal), (gst_uri_decode_bin_plugin_init),
(plugin_init):
Use right accumulators.
Proxy new signal.
Original commit message from CVS:
* gst/playback/gststreamselector.c: (gst_selector_pad_get_type),
(gst_selector_pad_class_init), (gst_selector_pad_init),
(gst_selector_pad_finalize), (gst_selector_pad_reset),
(gst_selector_pad_get_linked_pads), (gst_selector_pad_event),
(gst_selector_pad_getcaps), (gst_selector_pad_bufferalloc),
(gst_selector_pad_chain), (gst_stream_selector_get_type),
(gst_stream_selector_base_init), (gst_stream_selector_class_init),
(gst_stream_selector_init), (gst_stream_selector_set_property),
(gst_stream_selector_get_linked_pad),
(gst_stream_selector_getcaps),
(gst_stream_selector_is_active_sinkpad),
(gst_stream_selector_activate_sinkpad),
(gst_stream_selector_get_linked_pads),
(gst_stream_selector_request_new_pad),
(gst_stream_selector_release_pad):
* gst/playback/gststreamselector.h:
Improve streamselector, make it select and unselect the current pad more
intelligently.
Subclass GstPad for the sinkpads of the selector.
Handle segments more correctly.
Fix caps negotiation.
Implement release_pad.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_group_check_if_drained), (source_pad_event_probe),
(remove_fakesink):
Add drained signal fired when decodebin finishes decoding the data.
Remove deprecated STATE_DIRTY message.
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_class_init),
(unknown_type_cb), (new_decoded_pad_cb), (pad_removed_cb),
(analyse_source), (proxy_drained_signal), (make_decoder),
(source_new_pad), (value_list_append_structure_list),
(handle_redirect_message), (handle_message):
Proxy the new drained signal.
Handle pad removed from decodebin.
Handle redirect messages by sorting multiple redirections based on the
connection speed.
Original commit message from CVS:
* docs/design/design-decodebin.txt:
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
Update some more docs and comments.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (queue_threshold_reached),
(finish_source):
Avoid crash when there are external subtitles (fixes#491722).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (close_pad_link), (type_found):
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
Post nice/more useful error message if we don't have a decoder for
the primary type.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_expose):
Be a bit more useful, unblock the pads after we fired the no-more-pads
signal so that we can use the signal to inspect and connect all pads
without having to keep extra state outside of decodebin.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c:
(gst_uri_decode_bin_autoplug_continue),
(gst_uri_decode_bin_class_init), (no_more_pads_full):
Implement default signal handler so that we return TRUE when nothing is
connected.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_bin_dispose), (gst_decode_bin_set_caps),
(gst_decode_bin_set_subs_encoding),
(gst_decode_bin_get_subs_encoding), (gst_decode_bin_set_property),
(gst_decode_bin_get_property), (analyze_new_pad):
Move subtitle encoding property to decodebin2 so that it can set the
property value on all elements that it autoplugs and that require it.
Make caps refcounting more consistent in get/set.
* gst/playback/gsturidecodebin.c: (_gst_boolean_accumulator),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (proxy_unknown_type_signal),
(proxy_autoplug_continue_signal),
(proxy_autoplug_factories_signal), (proxy_autoplug_select_signal),
(make_decoder):
Proxy properties and relevant signals from the internal decodebin.
Make properties MT safe.
Original commit message from CVS:
Inspired by patch of: René Stadler <mail at renestadler dot de>
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init),
(gst_decode_bin_autoplug_continue),
(gst_decode_bin_autoplug_factories),
(gst_decode_bin_autoplug_select), (analyze_new_pad), (connect_pad),
(find_compatibles):
* gst/playback/gstplay-marshal.list:
Remove the autoplug-sort signal and replace it with a binding friendly
autoplug-select signal.
Add an autoplug-factories signal that can be used to generate a list of
factories to try to autoplug.
Add the GstPad to the autoplugging signal args as it might be needed to
make a good factory selection.
Fix up the marshallers for this. Fixes#407282.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (new_pad), (type_found):
Make the window for a race in typefind and shutting down smaller until
we figure out the right locking here. Avoids #485753 usually.
* gst/playback/gstdecodebin2.c: (type_found), (pad_added_group_cb):
Remove unneeded lock causing a race in typefind and shutting down.
Fixes#485753.
* gst/playback/gstplaybin.c: (gst_play_bin_change_state):
Also remove sinks when going to NULL because we might not complete the
state change to PAUSED, causing the PAUSED->READY state change not to
happen.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found),
(gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (type_found),
(gst_decode_bin_change_state):
Don't disconnect the have_type signal because we never reconnect it
later on. Instead keep a variable to see if we already detected a type.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_fakesink), (type_found):
* gst/playback/gstdecodebin2.c: (gst_decode_bin_init),
(type_found):
Unlink the signal handler when we found the type, we're not going to do
anything sensible with more type_found signals anyway.
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_init),
(gst_text_overlay_set_property):
* ext/vorbis/vorbisdec.c: (vorbis_handle_data_packet):
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
* gst-libs/gst/rtp/gstrtcpbuffer.c: (gst_rtcp_ntp_to_unix),
(gst_rtcp_unix_to_ntp):
* gst-libs/gst/rtsp/gstrtspmessage.c: (gst_rtsp_message_get_type):
* gst/playback/gstqueue2.c:
* tests/examples/seek/seek.c: (set_scale):
Fix a bunch of compile warnings shown with Forte.
* gst/audiorate/gstaudiorate.c:
Always pull in config.h before including any system headers.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_buffering),
(gst_queue_locked_flush), (gst_queue_locked_enqueue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_src_activate_pull):
Also fix#476514 for queue2.
Original commit message from CVS:
Patch by: Josep Torra Valles <josep@fluendo.com>
* gst/playback/gstplaybasebin.c:
Increase upper limit for audio queue a bit; fixes preroll problem
with playbin and decodebin2 when playing a quicktime trailer with
multichannel audio via http (#464666).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (close_pad_link):
We need to set up delayed-linking whenever the caps are non-fixed,
not just when there are multiple types - use gst_pad_is_fixed()
to test.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (group_commit),
(queue_remove_probe), (queue_threshold_reached):
Patch by: Josep Torra Valles <josep@fluendo.com>
Fixes: #465015
Make sure we remove the check_queues buffer probe from the
correct queue to avoid racily going back to "buffering 99%" when
buffering is actually complete.
Also, fix the spelling of Josep's surname in the ChangeLog.
Original commit message from CVS:
Patch by: Josep Torre Valles <josep@fluendo.com>
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(gst_play_base_bin_init), (queue_threshold_reached),
(gen_source_element), (setup_substreams),
(gst_play_base_bin_set_property), (gst_play_base_bin_get_property),
(gst_play_base_bin_get_streaminfo_value_array):
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(gst_play_bin_set_property), (gst_play_bin_get_property),
(gst_play_bin_handle_redirect_message):
Move connection-speed property from playbin to playbasebin so that we
can also configure it in source elements that have the connection-speed
property. Fixes#464028.
Add some debug info here and there.
Original commit message from CVS:
Patch by: Dan Williams <dcbw at redhat dot com>
* gst/playback/gstplaybasebin.c:
(gst_play_base_bin_get_streaminfo_value_array):
Don't return NULL when querying the stream info value array but instead
return an empty array. Fixes#459204.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (no_more_pads_full),
(setup_source):
Clear the dynamic pads counter when starting a new uri. This makes
reusing playbin work again.
Fixes#454264.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering):
Use other metrics as well when estimating the buffer level.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (make_decoder), (setup_source):
Small debug improvement.
* gst/playback/gstqueue2.c: (apply_segment), (update_buffering),
(plugin_init):
Tweak the rate estimation period.
When calculating the buffer filledness in rate estimation mode, don't
mix it with other metrics.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_new),
(gst_decode_group_expose), (gst_decode_group_free), (add_fakesink):
When creating the groups, allow for a 5 second, unlimited buffers
preroll phase after which we expose the group.
When the group is exposed, use a small number of buffers up to a 2
second limit. Also disconnect the overrun signal from multiqueue when we
exposed the group because it is not needed anymore.
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_find_chains):
The chain should be freed if we error out here, else it will leak.
* gst/playback/gstdecodebin.c: (disconnect_unlinked_signals),
(cleanup_decodebin):
Don't forget to *properly* remove the signals, else it will leak.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
When handling a delayed-caps notification case, mark
the group as dynamic so that the nbdynamic count is
incremented and decremented correctly. Fixes: #449156
Patch by: Wim Taymans <wim@fluendo.com>
