... thereby (partially) deprecating properties currently controlling whether
or not byte-stream output or NAL/AU alignment (though properties still determine
fallback if nothing specified in caps).
Fixes#606662.
Use 3 adapters, one to accumulate paketization units, another on to accumulate
tiles and a last one to accumulate the final frame.
Don't just blindly flush the adapter on DISCONT but only discard the current
packetization unit.
When we dropped jpeg2000 packets between SOP markers, adjust the SOT header with
the new lenght.
When parsing the bitstream, look for SOP markers because we are allowed to split
packets on those marker boundaries.
Rework the parsing code a little so that we can pack multiple Packetization
units in one RTP packet.
Only set the delta flag when all of the units in the packet are delta units.
Based on patch from Olivier Crête <olivier.crete@collabora.co.uk>
Fixes#632945
Incomming buffer is only pushed on the adapter at the end of the
handle_buffer function. But duration/timestamp of this buffer is already
taken into account for the current data in the adapter. This leads to
wrong rtp timestamps and extra latency.
Put a DISCONT event on the next output buffer when the input buffer had a
DISCONT.
Make sure we clear our adapter and reset our state before going to PAUSED.
Free the qtables.
Fixes#626869
Although the spec says that the clock-rate should always be 90000, some rtsp
servers send different clock-rates so we must accept then in order to handle
those streams too.
When we can't find any channel or encoding-params on the caps for dynamic
payload types, set the default number of channels to 1, as the spec says we
should.
See #623209
When parsing the number of channels, use the encoding-params property from the
RTP caps because that is where we can find the channels according to the spec.
Fall back to the channels property in the caps when needed.
Fixes#623209
G729 packets may only occur intermittently (e.g. cn packets), and as such
do not allow for perfect-rtptime calculating rtp times based on frame or byte
count. In particular, do not use rtp audio base payloader as base class, but
rather base payloader directly.
Even though we don't use delivery-method in our payloader, older versions of
the theora payloader in gstreamer required it. As such we need to keep this
around in the caps for backwards-compatibility.
This reverts part of 49463a37cbFixes#618940
When we calculate the frame duration, we need to use the amount of
frames in the _previous_ packet, not the current packet. The frame duration is
needed to correctly de-interleave interleaved streams. This fixes the case where
there are a variable number of frames in a packet.
Fixes#620494
It probably will not be in the final RFC as it is not in RFC 5215 for Vorbis.
If there is a configuration specified, assume it is in-line and if nothing is
specified, assume it is in-band.
https://bugzilla.gnome.org/show_bug.cgi?id=618386
Don't blindly add the durations of incomming buffers to the total queued
duration because it might be invalid. Mark the total queued duration invalid
when we receive an invalid incomming timestamp because that's when we lose track
of the total queued duration.
Fixes#618324
Add a new config-interval property to instruct the payloader to insert
configuration headers at periodic intervals in the stream
(when a keyframe is countered).
Add a new config-interval property to instruct the payloader to insert
config (VOSH, VOS, etc) at periodic intervals in the stream
(when a GOP or VOP-I is encountered).
Based on patch by <marc.leeman at gmail.com>
Fixes#607452.
... which evidently makes (most) sense if output buffers are
actually frames.
Partially based on a patch by
Miguel Angel Cabrera <mad_aluche at hotmail.com>
Fixes#609658.
So we stop dropping fragments as soon as there is a picture start (code).
In particular, this prevents dropping the first frame following
initial DISCONT.
... rather than falling back to sending the whole frame in one packet
if number of GOB startcodes < maximum.
One might take this further and still perform Mode B/C payloading,
but at least this should cater for decent fragments in typical cases.
Fixes#599585.
in rtph264depay.c, lines 577-576, NALU-type 24 (Single-Time Aggregation
Packet) is handled in fall-through as NALU-type 26 (unhandled).
This leads high quality h264 streams such as:
rtsp://stream.yle.mobi/yle/areena/MEDIA_E0342657_p3.mp4
to fail with "NAL unit type 24 not supported yet" (but it's actually
supported), and thus to close any stream which contains STAPs.
The proposed one-liner patch fixes the issue.
Fixes#615051.
When no constantDuration has been given in the caps, try to derive one from the
timestamp difference between packets. Also keep doing this for each packet
because some broken streams might simply provide wrong timestamps.
The profile-level-id represents restrictions on what can be sent, it does not
describe the stream. So it should be reflected in the sink caps of the
payloader, not the src caps.
https://bugzilla.gnome.org/show_bug.cgi?id=607353
Use GstRTPBaseAudioPayload as the base class. This saves a lot of code and fixes
a bunch of problems that were already solved in the base class.
Fixes#853367
Add a new spspps-interval property to instruct the payloader to insert
SPS and PPS at periodic intervals in the stream.
Rework the SPS/PPS handling so that bytestream and AVC sample code both use the
same code paths to handle sprop-parameter-sets. This also allows to have the AVC
code to insert SPS/PPS like the bytestream code.
Fixes#604913
celtdepay : added default framesize(480) channels(1) and clockrate(32000)
depay_setcaps : now gets channels and framesize from string with default value
depay_process : now adds timestamp to outbuf
Added frame_size to GstRtpCeltDepay
Changed some GST_DEBUG to GST_DEBUG_OBJECT or GST_LOG_OBJECT
celtpay : getcaps : gets channel and framesize and sets caps
Added frame-size to static caps for audio/x-celt
In case of non-interleaved (= sequentially payloaded) streams,
the AU-Index serves little purpose (that is not already covered by
RTP fields). (Broken) Payloaders might consider this field then
to be disregarded and have non spec compliant values, e.g. each
RTP packet having AU-Index 2 (rather than 0). As such, ensure/force
simple sequential sending of non-interleaved streams.
Whenever we see a gap, we flush the temporary packets (but not the adapter). If we
had some data temporarily stored it will be outputted (the sound will sound a bit
garbled... but that's how it sounds on MacOSX :)
Reverse-engineered by comparing:
* A rtp hinted file provided by DarwinStreamingServer
* The output procued by DSS for that same file
Also used various streaming sources available on the internet to fine-tune
the code.
The header/codec_data extraction methods are from FFMpeg (LGPL).
Use some of the SDP attributes when they are present to specify the output
dimension and framerate. This allows us to receive jpeg frames larger than
2040 width/height.
Fixes#564437
Rewrite the quant table parsing to also handle multiple tables in one JPEG HDQ
segment.
Handle more jpeg types by keeping track of the tables used per component and
putting the used ones in the quant headers.
Don't require width/height on the caps. Use the SOF header to find width/height
and fall back to the caps if there is no SOF. Also use the SOF info to find the
subsampling and quantization tables used. This allows us to set the right type
value in the JPEG rtp header.
Deprecate the quality property, it's unused now and it was used wrongly before.
Always send full quant tables for now until we have some code to detect default
ones.
Fixes#580880
Use the width and the height from the payload headers and set them on the
output caps for added awesomeness.
Fix quant parsing, we need to check the type in the lower 6 bits.
Add first bits of caching quantization tables.
We implemented the AAL2 packing, add the encoding-name for those to the caps and
a property to force AAL2 decoding (always TRUE for now).
Implement RFC3551 unpacking for regular G726.
See #567140.
In the sequence of header lengths, for headers >127 bytes, we use
multiple bytes to encode the length. Bytes other than the last must have
the top (flag) bit set.
The audioMuxVersion structure is packed in such a way that the codec
data does not start byte-aligned, which means there's an extra bit of
padding at the end. We don't want that bit in the codec data, since
some decoders seem get confused when they're fed with an extra codec
data byte (also it's just not right of course).
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Original commit message from CVS:
* gst/rtp/gstrtpjpegdepay.c: (gst_rtp_jpeg_depay_process):
Add an EOI marker at the end of the jpeg frame when it's missing.
Fixes#563056.
Original commit message from CVS:
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_flush),
(gst_rtp_mp4v_pay_event):
Don't try to push packets before we could find a valid config
startcode. Fixes#563509.
Original commit message from CVS:
Patch by: Yotam <sh dot yotam at gmail dot com>
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_event):
Flush the remaining frames on EOS. Fixes#560641.
Original commit message from CVS:
* gst/rtp/gstrtpmpadepay.c: (gst_rtp_mpa_depay_setcaps):
* gst/rtp/gstrtpmpapay.c:
Narrow down the caps of the mpeg audio pay/depayloaders to only accept
mpeg version 1. Fixes#558427.
Original commit message from CVS:
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_flush),
(gst_rtp_L16_pay_getcaps):
Only put an integral amount of samples in the RTP packet.
Fixes#556641.
Original commit message from CVS:
* gst/rtp/gstrtpchannels.c: (gst_rtp_channels_get_by_index):
* gst/rtp/gstrtpchannels.h:
Add method to get possible channel positions.
Original commit message from CVS:
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_setcaps):
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps),
(gst_rtp_L16_pay_getcaps):
* gst/rtp/gstrtpchannels.c: (check_channels),
(gst_rtp_channels_get_by_pos), (gst_rtp_channels_get_by_order),
(gst_rtp_channels_create_default):
* gst/rtp/gstrtpchannels.h:
Add mappings for multichannel support. Does not completely just work
because the getcaps function does not yet return the allowed channel
mappings. See #556641.
Original commit message from CVS:
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_setcaps),
(gst_rtp_L16_depay_process):
Check if clock-rate and channels are valid.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpac3depay.c: (gst_rtp_ac3_depay_setcaps),
(gst_rtp_ac3_depay_process):
Don't ignore the return value of set_caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_setcaps),
(gst_rtp_amr_depay_process):
* gst/rtp/gstrtpamrdepay.h:
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set output caps on the buffers, the base class does that for
us.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpdvdepay.c: (gst_rtp_dv_depay_setcaps),
(gst_rtp_dv_depay_process), (gst_rtp_dv_depay_reset):
* gst/rtp/gstrtpdvdepay.h:
Clean up caps negotiation.
The subclass will make sure we are negotiated.
* gst/rtp/gstrtpg726depay.c: (gst_rtp_g726_depay_setcaps),
(gst_rtp_g726_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpg729depay.c: (gst_rtp_g729_depay_init),
(gst_rtp_g729_depay_setcaps), (gst_rtp_g729_depay_process):
* gst/rtp/gstrtpg729depay.h:
The subclass will make sure we are negotiated.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmdepay.c: (gst_rtp_gsm_depay_setcaps),
(gst_rtp_gsm_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpgsmpay.c: (gst_rtp_gsm_pay_setcaps):
Clean up caps negotiation.
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_setcaps),
(gst_rtp_h263_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263pay.c: (gst_rtp_h263_pay_setcaps),
(gst_rtp_h263_pay_flush), (gst_rtp_h263_pay_handle_buffer):
* gst/rtp/gstrtph263pay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_setcaps),
(gst_rtp_h263p_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph263ppay.c: (gst_rtp_h263p_pay_class_init),
(gst_rtp_h263p_pay_setcaps), (gst_rtp_h263p_pay_flush),
(gst_rtp_h263p_pay_handle_buffer):
* gst/rtp/gstrtph263ppay.h:
Don't ignore the return value of set_outcaps.
Do some more timestamps.
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_setcaps),
(gst_rtp_h264_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
Fix possible caps leak.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_setcaps):
Add some more debug info.
* gst/rtp/gstrtpilbcdepay.c: (gst_rtp_ilbc_depay_setcaps),
(gst_rtp_ilbc_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpilbcpay.c: (gst_rtpilbcpay_sink_setcaps):
Clean up caps negotiation.
* gst/rtp/gstrtpmp1sdepay.c: (gst_rtp_mp1s_depay_setcaps),
(gst_rtp_mp1s_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp2tdepay.c: (gst_rtp_mp2t_depay_setcaps),
(gst_rtp_mp2t_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_setcaps),
(gst_rtp_mp4a_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmp4apay.c: (gst_rtp_mp4a_pay_new_caps),
(gst_rtp_mp4a_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_setcaps),
(gst_rtp_mp4g_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4gpay.c: (gst_rtp_mp4g_pay_finalize),
(gst_rtp_mp4g_pay_new_caps), (gst_rtp_mp4g_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmp4vdepay.c: (gst_rtp_mp4v_depay_setcaps),
(gst_rtp_mp4v_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
No need to set caps on buffers, subclass does that for us.
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_new_caps),
(gst_rtp_mp4v_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpadepay.c: (gst_rtp_mpa_depay_setcaps),
(gst_rtp_mpa_depay_process):
Clean up caps negotiation.
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtpmpapay.c: (gst_rtp_mpa_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpmpvdepay.c: (gst_rtp_mpv_depay_setcaps),
(gst_rtp_mpv_depay_process):
Clean up caps negotiation.
Actually set output caps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpmpvpay.c: (gst_rtp_mpv_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmadepay.c: (gst_rtp_pcma_depay_setcaps),
(gst_rtp_pcma_depay_process):
Clean up caps negotiation.
Set output buffer duration because we can.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmapay.c: (gst_rtp_pcma_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtppcmudepay.c: (gst_rtp_pcmu_depay_setcaps),
(gst_rtp_pcmu_depay_process):
Clean up caps negotiation.
Use the marker bit to set the DISCONT flag on outgoing buffers.
* gst/rtp/gstrtppcmupay.c: (gst_rtp_pcmu_pay_setcaps):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_setcaps), (gst_rtp_speex_depay_process):
Clean up caps negotiation.
Set output caps on the pad and header buffers.
Set duration on output buffers because we can.
* gst/rtp/gstrtpspeexpay.c: (gst_rtp_speex_pay_parse_ident):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpsv3vdepay.c: (gst_rtp_sv3v_depay_setcaps),
(gst_rtp_sv3v_depay_process):
Clean up caps negotiation.
No need to validate the buffer, the base class does that for us.
No need to set caps out output buffers, subclass does that.
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps),
(gst_rtp_theora_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtptheorapay.c: (gst_rtp_theora_pay_class_init),
(gst_rtp_theora_pay_flush_packet), (encode_base64),
(gst_rtp_theora_pay_finish_headers), (gst_rtp_theora_pay_parse_id),
(gst_rtp_theora_pay_handle_buffer):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_setcaps),
(gst_rtp_vorbis_depay_process):
Don't ignore the return value of setcaps.
No need to validate the buffer, the base class does that for us.
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_finish_headers):
Don't ignore the return value of set_outcaps.
* gst/rtp/gstrtpvrawdepay.c: (gst_rtp_vraw_depay_setcaps):
Clean up caps negotiation, don't ignore setcaps return.
* gst/rtp/gstrtpvrawpay.c: (gst_rtp_vraw_pay_setcaps):
Don't ignore the return value of set_outcaps.
Original commit message from CVS:
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_class_init),
(gst_rtp_amr_depay_process):
Mark DISCONT on output buffers when the marker bit signals a new talk
spurt.
* gst/rtp/gstrtpamrpay.c: (gst_rtp_amr_pay_handle_buffer):
Set the marker bit for buffers with a DISCONT flag to signal a talk
spurt.
Original commit message from CVS:
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_init),
(gst_rtp_mp4g_depay_finalize), (gst_rtp_mp4g_depay_setcaps),
(gst_rtp_mp4g_depay_clear_queue), (gst_rtp_mp4g_depay_flush_queue),
(gst_rtp_mp4g_depay_queue), (gst_rtp_mp4g_depay_process),
(gst_rtp_mp4g_depay_change_state):
* gst/rtp/gstrtpmp4gdepay.h:
Handle interleaved streams by reordering AU in a queue.
Original commit message from CVS:
* gst/rtp/gstrtpmp4gdepay.c: (gst_bs_parse_init),
(gst_bs_parse_read), (gst_rtp_mp4g_depay_process):
Change some of the ranges in the caps, mostly for the amount of bits we
can use.
Added a little bitstream parse and use it to parse the AU header fields.
Check for malformed and wrongly sized packets better.
Implement more header field parsing.
Handle the size of fragmented packets correctly.
Original commit message from CVS:
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_process):
* gst/rtp/gstrtpspeexdepay.h:
Revert last change: Only the jitterbuffer is able to convert RTP to
Gstreamer timestamps and normal (de)payloaders should simply copy it.
Reopens bug #541787.
Original commit message from CVS:
* gst/rtp/gstrtpvrawdepay.c:
Include stdlib.h for atoi().
* gst/rtsp/gstrtspsrc.c:
Use floating point math for latencies < 0 sec in log output.
Original commit message from CVS:
Patch by: Tomasz Grobelny <tomasz at grobelny dot oswiecenia dot net>
* gst/rtp/gstrtpspeexdepay.c: (gst_rtp_speex_depay_init),
(gst_rtp_speex_depay_process):
* gst/rtp/gstrtpspeexdepay.h:
Take timestamp from the RTP packet as a first step to fix problems
with transmission over RTP when the network is not reliable.
Fixes bug #541787.
Original commit message from CVS:
* gst/rtp/gstrtpg726pay.c: (gst_rtp_g726_pay_setcaps):
No need to check for audio/G723 and audio/32KADPCM here as they are
no longer supported.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps):
Make the delivery-method mandatory on the caps and only accept inline
for now.
Reverse strcmp checks for delivery-method.
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_setcaps):
Make delivery method optional when parsing caps and note this in the
caps.
Reverse strcmp checks for delivery-method.
* gst/rtp/gstrtpvorbispay.c:
Update a comment to note that the delivery-method is optional,
Fixes#537675.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtptheorapay.c:
The Theora RTP payloader only supports the "inline" delievery method
so let's declare this on the caps of the static pad template.
Fixes bug #537675.
Original commit message from CVS:
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_class_init),
(gst_rtp_h264_depay_init), (gst_rtp_h264_depay_set_property),
(gst_rtp_h264_depay_get_property), (gst_rtp_h264_depay_setcaps),
(gst_rtp_h264_depay_process):
* gst/rtp/gstrtph264depay.h:
Add experimental support for outputting quicktime-like AVC output in
addition to the existing bytestream output.
* gst/rtp/gstrtph264pay.c: (gst_h264_scan_mode_get_type),
(gst_rtp_h264_pay_class_init), (gst_rtp_h264_pay_init),
(gst_rtp_h264_pay_setcaps), (gst_rtp_h264_pay_payload_nal),
(gst_rtp_h264_pay_handle_buffer), (gst_rtp_h264_pay_set_property),
(gst_rtp_h264_pay_get_property):
* gst/rtp/gstrtph264pay.h:
Make the parsing mode configurable, for some inputs we don't need to
scan every byte for start codes.
Only set the marker bit on ACCESS units.
Original commit message from CVS:
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_process):
Small comment added.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_class_init),
(gst_rtp_h264_pay_decode_nal), (gst_rtp_h264_pay_parse_sps_pps),
(gst_rtp_h264_pay_payload_nal), (gst_rtp_h264_pay_handle_buffer):
Debug string cleanups (remove trailing \n)
Refactor and clean up the payloader a bit and make sure that we only
put one NAL unit in an RTP packet even if the input buffer contains
multiple NAL units.
Add suport for AVC format input.
Original commit message from CVS:
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_class_init),
(gst_rtp_h264_pay_finalize), (gst_rtp_h264_pay_handle_buffer),
(gst_rtp_h264_pay_set_property), (gst_rtp_h264_pay_get_property):
* gst/rtp/gstrtph264pay.h:
Make it possible to specify profile-level-id and sprop-parameter-sets
using properties in case they are not available in-stream.
Original commit message from CVS:
* gst/rtp/gstrtph264pay.c (gst_rtp_h264_pay_parse_sps_pps):
Use GST_STR_NULL when trying to print sps and pps strings that could
be NULL, as this might crash on some platforms.
Original commit message from CVS:
* gst/rtp/gstrtpilbcpay.c:
Added missing stdlib.h include for strtol(), and made include ordering and
style consistent with the corresponding depayloader.
Original commit message from CVS:
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_process):
Add some more debug info and guard against small payloads.
* gst/rtp/gstrtppcmudepay.c: (gst_rtp_pcmu_depay_process):
Set duration on outgoing buffers because we can.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtpspeexpay.c: (gst_rtp_speex_pay_class_init),
(gst_rtp_speex_pay_getcaps):
Add negotiation for the speec channels and rate. See #465146.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtpilbcpay.c: (gst_rtpilbcpay_class_init),
(gst_rtpilbcpay_sink_setcaps), (gst_rtpilbcpay_sink_getcaps):
Add negotiation for the ILBC mode. See #465146.
Original commit message from CVS:
* gst/rtp/gstasteriskh263.c: (gst_asteriskh263_chain):
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_add_internal):
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Use GLib versions of htonl, htons, ntohl and ntohs in order
to avoid problems on win32 (#529707).
Original commit message from CVS:
2008-04-07 Julien Moutte <julien@fluendo.com>
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_setcaps): Fix build
because of a bad argument number.
Original commit message from CVS:
* gst/rtp/gstrtph264pay.c: (encode_base64),
(gst_rtp_h264_pay_setcaps), (gst_rtp_h264_pay_handle_buffer):
* gst/rtp/gstrtph264pay.h:
Parse codec_data for future AVC compatibility.
Fail when we encounter AVC data for now.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtph263pdepay.c: (gst_rtp_h263p_depay_process):
Check that a buffer is large enough before reading from it.
Fixes bug #521102.
Original commit message from CVS:
patch by: Wim Taymans <wim.taymans@collabora.co.uk>
fixes: #514889
* gst/rtp/gstrtph264pay.c:
* gst/rtp/gstrtpmp4gdepay.c:
* gst/rtp/gstrtpmp4gpay.c:
* gst/rtp/gstrtpmp4gpay.h:
* gst/rtp/gstrtptheorapay.c:
* gst/rtp/gstrtpvorbispay.c:
Fix various leaks shown up in valgrind
- free sprops and buffer in error cases in H264 payloader
- fix leak in mp4g depayloader when construction the caps
- don't leak config string in the mp4g payloader
- don't leak buffers and headers in theora and vorbis payloaders
* tests/check/elements/rtp-payloading.c:
Fix the RTP data test
- Actually send valid amr data to the payloader instead of 20
zero-bytes
- The mp4g payloader expects codec_data on the caps
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtp/gstrtptheoradepay.c: (gst_rtp_theora_depay_setcaps):
* gst/rtp/gstrtptheorapay.c:
Fix the clock rate to 90000 as required by the RFC.
Fixes#508644.
Original commit message from CVS:
Patch by: Wai-Ming Ho <webregbox at yahoo dot co dot uk>
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_init),
(gst_rtp_h264_pay_finalize), (gst_rtp_h264_pay_setcaps),
(next_start_code), (is_nal_equal), (gst_rtp_h264_pay_decode_nal),
(encode_base64), (gst_rtp_h264_pay_parse_sps_pps),
(gst_rtp_h264_pay_handle_buffer):
* gst/rtp/gstrtph264pay.h:
Use higher performance start-code searching.
Parse NALs and store SPS, PPS and profile in the caps so that they can
be used in the SDP. Fixes#502814.
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_class_init),
(gst_rtp_h263_depay_process):
Code beautification.
Added debug statements.
Don't bit-shift everything, just do operations on last/first byte
instead.
Original commit message from CVS:
Patch by: Jayarama S. Santana <sundarsantana at gmail dot com>
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_process):
Fix wrong comparison in overrun check. Fixes#499239 some more.
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_init),
(gst_rtp_h263_depay_process):
* gst/rtp/gstrtph263depay.h:
Fix h263 depayloader so that ANY h263 decoder can handle the outgoing
stream.
Original commit message from CVS:
Based on Path by: Jayarama S. Santana <sundarsantana at gmail dot com>
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_setcaps),
(gst_rtp_mp4a_depay_process):
* gst/rtp/gstrtpmp4adepay.h:
Fix depayloading when multiple frames are inside one RTP packet.
Fixes#499239.
Original commit message from CVS:
* gst/rtp/gstrtph263depay.c: (gst_rtp_h263_depay_process):
Read the I flag for Mode A h263 rtp stream and set the
GST_BUFFER_FLAG_DELTA_UNIT accordingly.
Fixes#499383
Original commit message from CVS:
Patch by: Jordi Jaen Pallares <jordijp at gmail dot com>
* gst/rtp/gstrtpmp2tpay.c: (gst_rtp_mp2t_pay_class_init),
(gst_rtp_mp2t_pay_init), (gst_rtp_mp2t_pay_finalize),
(gst_rtp_mp2t_pay_flush), (gst_rtp_mp2t_pay_handle_buffer):
* gst/rtp/gstrtpmp2tpay.h:
Fill the MTU with as many packets as possible. Fixes#491323.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_setcaps):
Fix small leak. Fixes#497017.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_finalize):
Use correct unref function for buffers. #488844.
Original commit message from CVS:
Patch by: Anders Skargren <anders dot skargren at axis dot com>
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_handle_buffer):
Set marker bit correctly.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_init),
(gst_rtp_mp4v_pay_finalize), (gst_rtp_mp4v_pay_flush),
(gst_rtp_mp4v_pay_handle_buffer):
* gst/rtp/gstrtpmp4vpay.h:
Free the config string. Fixes#480707.
Clean up the timestamp code a little.
Original commit message from CVS:
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_process):
Set outgoing packet duration because we can. Fixes#478244 some more.
Original commit message from CVS:
Patch by: Haakon Sporsheim <haakon.sporsheim at tandberg com>
* gst/rtp/gstrtph263pay.c:
Fix up header structure so that compilers don't add padding
between the structure fields, since that would lead to us
sending RTP packets with broken headers (as is currently the
case when compiling with MSVC). Also see similar fixes in
libgstrtp in gst-plugins-base. (#474616; #471194)
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/rtp/gstrtpilbcpay.c: (gst_rtpilbcpay_setcaps):
Set the encoding-name in the rtp caps to all uppercase, as required by
the caps spec.
Some small cleanups in the error paths. Fixes#453037.
Original commit message from CVS:
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_setcaps):
Make sure we allocate enough memory for the codec_data.
Fixes#447210.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/rtp/gstrtppcmadepay.c: (gst_rtp_pcma_depay_setcaps):
* gst/rtp/gstrtppcmudepay.c: (gst_rtp_pcmu_depay_setcaps):
Add missing rate fields to caps. Fixes#441118.
Original commit message from CVS:
Based on Patch by: Daniel Charles <dcharles at ti dot com>
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_setcaps),
(gst_rtp_amr_depay_process):
* gst/rtp/gstrtpamrdepay.h:
* gst/rtp/gstrtpamrpay.c: (gst_rtp_amr_pay_base_init),
(gst_rtp_amr_pay_class_init), (gst_rtp_amr_pay_init),
(gst_rtp_amr_pay_setcaps), (gst_rtp_amr_pay_handle_buffer):
* gst/rtp/gstrtpamrpay.h:
Add support for AMR-WB.
Small cleanups such as using BOILERPLATE.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/rtp/gstrtph263ppay.c: (gst_fragmentation_mode_get_type),
(gst_rtp_h263p_pay_class_init), (gst_rtp_h263p_pay_init),
(gst_rtp_h263p_pay_set_property), (gst_rtp_h263p_pay_get_property),
(gst_rtp_h263p_pay_flush):
* gst/rtp/gstrtph263ppay.h:
Add new fragmentation mode base on GOB headers. Fixes#438940.
Original commit message from CVS:
* gst/rtp/gstrtptheoradepay.c: (decode_base64),
(gst_rtp_theora_depay_parse_configuration):
* gst/rtp/gstrtptheorapay.c: (encode_base64),
(gst_rtp_theora_pay_finish_headers),
(gst_rtp_theora_pay_handle_buffer):
Update theora pay/depayloader in a similar to vorbis.
* gst/rtp/gstrtpvorbisdepay.c:
(gst_rtp_vorbis_depay_parse_configuration):
Update docs.
Original commit message from CVS:
* gst/rtp/README:
Update README with new RTP variables that will be used for
synchronisation.
* gst/rtp/gstrtpvorbisdepay.c: (decode_base64),
(gst_rtp_vorbis_depay_parse_configuration),
(gst_rtp_vorbis_depay_process):
* gst/rtp/gstrtpvorbispay.c: (encode_base64),
(gst_rtp_vorbis_pay_finish_headers),
(gst_rtp_vorbis_pay_handle_buffer):
Update vorbis pay and depayloader to draft-04.
Original commit message from CVS:
* gst/level/gstlevel.c: (gst_level_calculate_##TYPE),
(gst_level_transform_ip):
Use guint8 * instead of gpointer then vs6 know the size of data
pointed when moving the pointer.
* gst/rtp/gstrtph264pay.c: (gst_rtp_h264_pay_handle_buffer):
Move instructions after variables declaration.
* win32/vs6/autogen.dsp:
* win32/vs6/libgstrtp.dsp:
* win32/vs6/libgstrtsp.dsp:
Update vs6 project files.
Original commit message from CVS:
* gst/rtp/Makefile.am:
* gst/rtp/fnv1hash.c (MASK_24, FNV1_HASH_32_INIT, FNV1_HASH_32_PRIME,
fnv1_hash_32_new, fnv1_hash_32_update, fnv1_hash_32_to_24):
* gst/rtp/fnv1hash.h (__GST_FNV1_HASH_H__):
Add a simple hashing implementation that we can use to generate
a 24-bit ident value based on the codebooks for vorbis and theora.
* gst/rtp/gstrtptheorapay.c (gst_rtp_theora_pay_finish_headers,
gst_rtp_theora_pay_handle_buffer):
* gst/rtp/gstrtpvorbisdepay.c
(gst_rtp_vorbis_depay_parse_configuration,
gst_rtp_vorbis_depay_switch_codebook, gst_rtp_vorbis_depay_process):
* gst/rtp/gstrtpvorbispay.c (gst_rtp_vorbis_pay_reset_packet,
gst_rtp_vorbis_pay_init_packet, gst_rtp_vorbis_pay_flush_packet,
gst_rtp_vorbis_pay_finish_headers, gst_rtp_vorbis_pay_handle_buffer):
Use the hashing function, ensuring that the same codebooks result
in the same ident and thus the same SDP description.
Various log fixes/changes.
Original commit message from CVS:
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_setcaps),
(gst_rtp_amr_depay_process):
Fix depayloader clock_rate and some cleanups.
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_finalize),
(gst_rtp_h264_depay_setcaps), (gst_rtp_h264_depay_process):
* gst/rtp/gstrtph264depay.h:
Don't push codec_data in the adapter because it might get flushed when
we get a discont.
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_process):
Handle multiple AU per packet.
* gst/rtp/gstrtpsv3vdepay.c: (gst_rtp_sv3v_depay_process),
(gst_rtp_sv3v_depay_plugin_init):
Disable rank, this one does not work.
Remove timestamping, base class does that.
Original commit message from CVS:
* gst/rtp/gstrtpmp4adepay.c: (gst_rtp_mp4a_depay_class_init),
(gst_rtp_mp4a_depay_setcaps), (gst_rtp_mp4a_depay_plugin_init):
This element is ready to be autoplugged.
Original commit message from CVS:
* gst/rtp/gstrtppcmapay.c:
* gst/rtp/gstrtppcmapay.h:
* gst/rtp/gstrtppcmupay.c:
* gst/rtp/gstrtppcmupay.h:
Ported mulaw and alaw payloaders to use new base class
Original commit message from CVS:
* gst/rtp/README:
Fix case of string params.
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_class_init),
(gst_rtp_h264_depay_setcaps), (gst_rtp_h264_depay_process):
Fix depayloader, support more packet types.
Add sync codes to make sure the packetizer can do its job.
* gst/rtp/gstrtpmp4gdepay.c:
* gst/rtp/gstrtpmp4gpay.c:
* gst/rtp/gstrtpmpvdepay.c: (gst_rtp_mpv_depay_process):
Fix caps case again.
Original commit message from CVS:
* gst/rtp/README:
* gst/rtp/gstrtpilbcdepay.c:
* gst/rtp/gstrtpilbcpay.c:
* gst/rtp/gstrtpmp4gdepay.c:
* gst/rtp/gstrtpmp4gpay.c:
* gst/rtp/gstrtpspeexdepay.c:
* gst/rtp/gstrtpspeexpay.c:
* gst/rtp/gstrtpsv3vdepay.c:
* gst/rtp/gstrtptheoradepay.c:
* gst/rtp/gstrtptheorapay.c:
* gst/rtp/gstrtpvorbisdepay.c:
* gst/rtp/gstrtpvorbispay.c:
Fix case of encoding-name and key/value pairs to match the document.
This is to make interoperation with SDP case-insensitive as required by
the relevant RFCs.
Original commit message from CVS:
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_setcaps),
(gst_rtp_L16_pay_flush), (gst_rtp_L16_pay_handle_buffer):
* gst/rtp/gstrtpL16pay.h:
Fill up to MTU using adapter.
Timestamp rtp packets.
Original commit message from CVS:
* gst/rtp/Makefile.am:
* gst/rtp/gstrtp.c: (plugin_init):
* gst/rtp/gstrtpL16depay.c: (gst_rtp_L16_depay_base_init),
(gst_rtp_L16_depay_class_init), (gst_rtp_L16_depay_init),
(gst_rtp_L16_depay_parse_int), (gst_rtp_L16_depay_setcaps),
(gst_rtp_L16_depay_process), (gst_rtp_L16_depay_set_property),
(gst_rtp_L16_depay_get_property), (gst_rtp_L16_depay_change_state),
(gst_rtp_L16_depay_plugin_init):
* gst/rtp/gstrtpL16depay.h:
* gst/rtp/gstrtpL16pay.c: (gst_rtp_L16_pay_get_type),
(gst_rtp_L16_pay_base_init), (gst_rtp_L16_pay_class_init),
(gst_rtp_L16_pay_init), (gst_rtp_L16_pay_finalize),
(gst_rtp_L16_pay_setcaps), (gst_rtp_L16_pay_handle_buffer),
(gst_rtp_L16_pay_plugin_init):
* gst/rtp/gstrtpL16pay.h:
Port and enable raw audio payloader/depayloader. Needs a bit more work
on the payloader side.
Original commit message from CVS:
* gst/rtp/gstrtpmp4gdepay.c: (gst_rtp_mp4g_depay_parse_int),
(gst_rtp_mp4g_depay_setcaps), (gst_rtp_mp4g_depay_process):
Parse config params as string and int.
Parse and use AU header length
Original commit message from CVS:
Patch by: Ville Syrjala <ville.syrjala@movial.fi>
* gst/rtp/gstrtph263pay.c:
* gst/rtp/gstrtph263pdepay.c:
* gst/rtp/gstrtph263ppay.c:
Specify H.263 variant and version in the caps (fixes#361637)
Original commit message from CVS:
* gst/rtp/gstrtpvorbisdepay.c:
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_handle_buffer):
Fix description.
Small cleanup in the payloader.
Original commit message from CVS:
* gst/rtp/Makefile.am:
We depend on gsttag to generate the vorbis comments.
* gst/rtp/gstrtpvorbisdepay.c:
(gst_rtp_vorbis_depay_parse_configuration),
(gst_rtp_vorbis_depay_setcaps),
(gst_rtp_vorbis_depay_switch_codebook),
(gst_rtp_vorbis_depay_process):
* gst/rtp/gstrtpvorbisdepay.h:
Parse configuration string in the depayloader.
Implement selecting and switching to a new codebook.
Receiving vorbis over RTP now works.
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_reset_packet),
(gst_rtp_vorbis_pay_init_packet),
(gst_rtp_vorbis_pay_finish_headers),
(gst_rtp_vorbis_pay_handle_buffer):
* gst/rtp/gstrtpvorbispay.h:
Set timestamps on outgoing buffers and RTP packets.
Fix configuration string, prepend number of Packet headers.
Fix encoding of ident string.
Add delivery-method to caps.
Streaming vorbis over RTP now works.
Original commit message from CVS:
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_setcaps),
(gst_rtp_vorbis_pay_finish_headers), (gst_rtp_vorbis_pay_parse_id),
(gst_rtp_vorbis_pay_handle_buffer):
* gst/rtp/gstrtpvorbispay.h:
Generate a valid configuration string in the caps based on the
vorbis headers.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/alpha/gstalpha.c:
* gst/rtp/gstrtpamrdepay.c:
* gst/rtsp/gstrtspsrc.c:
* gst/udp/gstudpsrc.c:
* gst/videomixer/videomixer.c:
Include stdlib.h in some more places, makes things compile
with uClibc and -Werror (#357592).
Original commit message from CVS:
* gst/rtp/Makefile.am:
* gst/rtp/gstrtp.c: (plugin_init):
* gst/rtp/gstrtpvorbisdepay.c: (gst_rtp_vorbis_depay_process):
* gst/rtp/gstrtpvorbispay.c: (gst_rtp_vorbis_pay_setcaps),
(gst_rtp_vorbis_pay_reset_packet),
(gst_rtp_vorbis_pay_init_packet),
(gst_rtp_vorbis_pay_flush_packet), (gst_rtp_vorbis_pay_parse_id),
(gst_rtp_vorbis_pay_handle_buffer):
More fixage, set endoder-params correctly in the payloader.
Original commit message from CVS:
* gst/rtp/README:
Update README with some examples.
* gst/rtp/gstrtpmp4gpay.c: (gst_rtp_mp4g_pay_init),
(gst_rtp_mp4g_pay_finalize), (gst_rtp_mp4g_pay_parse_audio_config),
(gst_rtp_mp4g_pay_parse_video_config), (gst_rtp_mp4g_pay_new_caps),
(gst_rtp_mp4g_pay_setcaps):
* gst/rtp/gstrtpmp4gpay.h:
Make optional RTP parameters of type STRING, as required by the
application/x-rtp caps specification.
Original commit message from CVS:
* gst/rtp/gstrtph263pdepay.c:
* gst/rtp/gstrtph263ppay.c:
Correctly calculate size of each H263+ RTP buffer taking into account MTU and
RTP header.
Original commit message from CVS:
* gst/rtp/gstrtpamrdepay.c:
* gst/rtp/gstrtpmp4gdepay.c:
Caps extra properties must be defined as strings for
depayloaders because they are generated from an SDP.
* gst/rtp/Makefile.am:
* gst/rtp/gstrtp.c: (plugin_init):
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_base_init),
(gst_rtp_h264_depay_class_init), (gst_rtp_h264_depay_init),
(gst_rtp_h264_depay_finalize), (decode_base64),
(gst_rtp_h264_depay_setcaps), (gst_rtp_h264_depay_process),
(gst_rtp_h264_depay_set_property),
(gst_rtp_h264_depay_get_property),
(gst_rtp_h264_depay_change_state),
(gst_rtp_h264_depay_plugin_init):
* gst/rtp/gstrtph264depay.h:
Added basic, not completely functional RFC 3984 H264 depayloader.
Original commit message from CVS:
* gst/alpha/gstalphacolor.c: (gst_alpha_color_transform_caps):
* gst/debug/negotiation.c: (gst_negotiation_update_caps):
* gst/rtp/gstrtpilbcdepay.c: (gst_rtp_ilbc_depay_setcaps):
GST_PTR_FORMAT should be used to print caps in debug statements.
Original commit message from CVS:
2006-05-18 Philippe Kalaf <philippe.kalaf at collabora.co.uk>
* rtp/gst/gstrtph263pay.c:
Properly set static caps for H263 at 34.
Original commit message from CVS:
* gst/rtp/gstrtpmp4gpay.c: (gst_rtp_mp4g_pay_setcaps):
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_setcaps):
It's codec_data, not codec_info.
Original commit message from CVS:
2006-04-12 Philippe Kalaf <philippe.kalaf@collabora.co.uk>
* gst/rtp/gstrtppcmapay.c:
* gst/rtp/gstrtppcmapay.h:
* gst/rtp/gstrtppcmupay.c:
* gst/rtp/gstrtppcmupay.h:
Ported mulaw and alaw payloaders to use new base class
* gst/rtp/Makefile.am:
* gst/rtp/gstrtp.c:
* gst/rtp/gstrtpilbcpay.c:
* gst/rtp/gstrtpilbcpay.h:
* gst/rtp/gstrtpilbcdepay.c:
* gst/rtp/gstrtpilbcdepay.h:
Added new iLBC payloader/depayloader. Payloader uses new audio payload base
class.
Original commit message from CVS:
* gst/rtp/gstrtpmp4vdepay.c: (gst_rtp_mp4v_depay_process):
Don't leak memory allocated by gst_buffer_new_and_alloc() by
overwriting GST_BUFFER_MALLOCDATA.
Original commit message from CVS:
* ext/cdio/Makefile.am:
Add GST_BASE_CFLAGS and GST_BASE_LIBS (seems to be
required for Cygwin, see #317048)
* gst/rtp/gstasteriskh263.c:
Cygwin has includes for both the unix network socket API
and the windows API, but only one can be included, so fix
includes to only use one or the other, prefering the unxi
one (#317048).
Original commit message from CVS:
2006-02-23 Philippe Kalaf <philippe.kalaf at collabora.co.uk>
* rtp/gst/gstrtppcmadepay.c:
* rtp/gst/gstrtppcmadepay.h:
* rtp/gst/gstgstrtppcmapay.c:
* rtp/gst/gstgstrtppcmapay.h:
* rtp/gst/gstrtppcmudepay.c:
* rtp/gst/gstrtppcmudepay.h:
* rtp/gst/gstrtppcmupay.c:
* rtp/gst/gstrtppcmupay.h:
* rtp/gst/Makefile.am:
* rtp/gst/gstrtp.c:
* rtp/gst/README:
Separated the G711 payloaders/depayloaders into separate elements for
mulaw/alaw. Also removed the old g711 payloaders/depayloaders.
Original commit message from CVS:
* gst/rtp/gstrtpmp4gpay.c: (gst_rtp_mp4g_pay_class_init),
(gst_rtp_mp4g_pay_init), (gst_rtp_mp4g_pay_parse_audio_config),
(gst_rtp_mp4g_pay_parse_video_config), (gst_rtp_mp4g_pay_new_caps),
(gst_rtp_mp4g_pay_setcaps), (gst_rtp_mp4g_pay_flush):
* gst/rtp/gstrtpmp4gpay.h:
Make more things work.
Handle ACC config strings.
Original commit message from CVS:
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_setcaps):
First set options, then set caps or else the baseclass
will not know about the options, duh.
Original commit message from CVS:
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_class_init),
(gst_rtp_mp4v_pay_setcaps):
Don't waste time looking for a config string if we have codec_info
on the incomming caps.
Original commit message from CVS:
* gst/rtp/gstrtpamrdepay.c: (gst_rtp_amr_depay_chain):
Added more meaningfull warnings when something goes wrong.
Clear F bit on outgoing AMR packets.
* gst/rtp/gstrtpamrpay.c: (gst_rtp_amr_pay_class_init),
(gst_rtp_amr_pay_handle_buffer):
Added debugging category
Support payloading of multiple AMR frames.
* gst/rtp/gstrtpmp4vpay.c: (gst_rtp_mp4v_pay_depay_data):
Added some debugging.
Original commit message from CVS:
2005-12-22 Philippe Khalaf <burger@speedy.org>
* gst-plugins-good/gst/rtp/gstrtph263pdepay.h:
* gst-plugins-good/gst/rtp/gstrtph263pdepay.c:
* gst-plugins-good/gst/rtp/gstrtpmp4vdepay.h:
* gst-plugins-good/gst/rtp/gstrtpmp4vdepay.c:
Making these depayloaders (H263+ and mpeg4 video) inherit from
RtpBaseDepayloaderClass. Fixes bugs #323922 and #323908.
Original commit message from CVS:
2005-12-14 Philippe Khalaf <burger@speedy.org>
* gst-plugins-good/gst/rtp/gstasteriskh263.c:
* gst-plugins-good/gst/rtp/gstrtpamrdepay.c:
* gst-plugins-good/gst/rtp/gstrtpamrpay.c:
* gst-plugins-good/gst/rtp/gstrtpg711depay.c:
* gst-plugins-good/gst/rtp/gstrtpg711depay.c:
* gst-plugins-good/gst/rtp/gstrtpgsmdepay.c:
* gst-plugins-good/gst/rtp/gstrtph263pay.c:
* gst-plugins-good/gst/rtp/gstrtph263pdepay.c:
* gst-plugins-good/gst/rtp/gstrtph263ppay.c:
* gst-plugins-good/gst/rtp/gstrtpmp4vdepay.c:
* gst-plugins-good/gst/rtp/gstrtpmp4vpay.c:
* gst-plugins-good/gst/rtp/gstrtpmpadepay.c:
* gst-plugins-good/gst/rtp/gstrtpmpapay.c:
* gst-plugins-good/gst/rtp/README:
Fixed payload range in payloder caps. Removed payload range completly from
depayloaders as they don't require payload type in their caps. In effect,
there isn't any specific payload type for any given codec, only suggestions.
Fixes bug #324011.
Original commit message from CVS:
Payloader now sets some default caps on the srcpad if caps on the sinkpad are never set. This is important for the g711 to work with burger's rtpbin element.
Original commit message from CVS:
* gst/rtp/gstrtpamrenc.c: (gst_rtpamrenc_setcaps):
* gst/rtp/gstrtpgsmparse.c:
* gst/rtp/gstrtph263penc.c:
* gst/rtp/gstrtpmp4venc.c: (gst_rtpmp4venc_class_init),
(gst_rtpmp4venc_parse_data), (gst_rtpmp4venc_handle_buffer),
(gst_rtpmp4venc_set_property):
* gst/rtp/gstrtpmpaenc.c: (gst_rtpmpaenc_handle_buffer):
Various class and caps fixes from Andre Magalhaes (andrunko)
Original commit message from CVS:
* gst/rtp/TODO:
* gst/rtp/gstrtpdec.c: (gst_rtpdec_getcaps):
* gst/rtp/gstrtpmp4venc.c: (gst_rtpmp4venc_class_init),
(gst_rtpmp4venc_parse_data), (gst_rtpmp4venc_handle_buffer),
(gst_rtpmp4venc_set_property):
* gst/rtp/gstrtpmp4venc.h:
* gst/rtp/gstrtpmpaenc.c: (gst_rtpmpaenc_handle_buffer):
* gst/rtp/gstrtpmpaenc.h:
Use is_filled to both check MTU and max-ptime of base class.
Original commit message from CVS:
* gst/rtp/gstrtpmp4venc.c: (gst_rtpmp4venc_class_init),
(gst_rtpmp4venc_parse_data), (gst_rtpmp4venc_handle_buffer),
(gst_rtpmp4venc_set_property):
Don't fragment packets with multiple frames.
Original commit message from CVS:
* gst/rtp/TODO:
* gst/rtp/gstrtpmp4vdec.c: (gst_rtpmp4vdec_setcaps):
* gst/rtp/gstrtpmp4venc.c: (gst_rtpmp4venc_class_init),
(gst_rtpmp4venc_init), (gst_rtpmp4venc_parse_data),
(gst_rtpmp4venc_handle_buffer), (gst_rtpmp4venc_set_property),
(gst_rtpmp4venc_get_property):
* gst/rtp/gstrtpmp4venc.h:
Remove g_print.
Update TODO
Make payload encoder a bit smarter and more correct with
timestamps.
Added option in payloader to include config string in-band.
Original commit message from CVS:
* gst/rtp/README:
Update README
* gst/rtp/gstrtpamrdec.c: (gst_rtpamrdec_sink_setcaps):
Make extra params as strings.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_set_state),
(gst_rtspsrc_parse_rtpmap), (gst_rtspsrc_media_to_caps),
(gst_rtspsrc_stream_setup_rtp), (gst_rtspsrc_send):
Make state change return NO_PREROLL as this is a live
source.
* gst/udp/gstudpsrc.c: (gst_udpsrc_set_property):
Don't unref old caps when NULL.
Original commit message from CVS:
Updates to payloader/depayloaders, make payloaders use
the base classes.
Updated README with suggested RTP caps and how to convert
to/from SDP.
Added config descriptor in mp4v payloader.
Original commit message from CVS:
* common/c-to-xml.py:
* common/gtk-doc-plugins.mak:
a simple py script to generate valid xml from a C example
probably also need to strip an MIT license when we decide
* docs/plugins/Makefile.am:
* gst/level/Makefile.am:
* gst/level/gstlevel.c: (gst_level_init):
* gst/level/level-example.c: (message_handler), (main):
add an example to level that will show up in the docs
* gst/rtp/TODO:
add a note for the future
Original commit message from CVS:
* gst/rtp/gstrtph263penc.c: (gst_rtph263penc_class_init),
(gst_rtph263penc_flush), (gst_rtph263penc_chain),
(gst_rtph263penc_set_property), (gst_rtph263penc_get_property):
* gst/rtp/gstrtph263penc.h:
Added configurable pt and ssrc, to be merged in the caps or
a base class...
Original commit message from CVS:
* gst/rtp/gstrtph263pdec.c: (gst_rtph263pdec_init),
(gst_rtph263pdec_chain):
* gst/rtp/gstrtph263penc.c: (gst_rtph263penc_class_init),
(gst_rtph263penc_flush), (gst_rtph263penc_chain):
Some cleanups in the h263p (de)payloaders.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c:
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_setcaps):
* ext/amrnb/amrnbparse.c:
Update caps with audio/AMR.
* gst/rtp/gstrtpamrdec.c: (gst_rtpamrdec_init),
(gst_rtpamrdec_sink_setcaps), (gst_rtpamrdec_chain),
(gst_rtpamrdec_change_state):
* gst/rtp/gstrtpamrdec.h:
* gst/rtp/gstrtpamrenc.c: (gst_rtpamrenc_class_init),
(gst_rtpamrenc_init), (gst_rtpamrenc_chain):
Dont set FT headers twice, it was already in the encoded
bitstream.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play):
* gst/rtsp/rtspconnection.c: (parse_line):
Cleanups
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property):
* gst/udp/gstudpsrc.h:
Added caps property, we need this soon to type the buffers.
Original commit message from CVS:
* gst/rtp/gstrtpamrdec.c: (gst_rtpamrdec_init),
(gst_rtpamrdec_chain):
Fix up amr depayloader a bit.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play):
Look for options result in Public and Allow header fields..
spec says Allow but some servers return Public...
Original commit message from CVS:
* gst/rtp/gstrtpamrenc.c: (gst_rtpamrenc_class_init),
(gst_rtpamrenc_init), (gst_rtpamrenc_chain),
(gst_rtpamrenc_set_property), (gst_rtpamrenc_get_property):
* gst/rtp/gstrtpamrenc.h:
Added payload_type and ssrc properties to the payloader.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play):
Options need to be stripped and are in the Public header field.
* gst/rtsp/rtspurl.c: (rtsp_url_parse):
Fix url / parsing...
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/rtp/gstrtpgsmparse.c: (gst_rtpgsm_caps_nego):
Add missing NULL terminator (#157543).
Original commit message from CVS:
* ext/mad/gstid3tag.c : move from "Codec/(Dem/M)uxer" to "Codec/(Dem/M)uxer/Audio"
* gst/wavenc/gstwavenc.c : move from "Codec/Encoder/Audio" to "Codec/Muxer/Audio"
* gst/auparse/gstauparse.c :
- add code (commented for now) to support audio/x-adpcm on src pad
(we have no decoder for those layout yet)
* gst/cdxaparse/gstcdxaparse.c :
* gst/cdxaparse/gstcdxaparse.h :
- partial rewrite using RiffRead (ripped iain's wavparse code)
* gst/rtp/gstrtpL16enc.c : typo
* gst/rtp/gstrtpgsmenc.c : typo
Original commit message from CVS:
2004-01-03 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/rtp/rtp-packet.c:
Add sys/types.h include, since OS X doesn't define in_addr_t
in netinet/in.h, like it does on Linux (see #129600).
Original commit message from CVS:
Added #include of config.h so that they symbol "VERSION" could be found.
Also removed GST_CAT_EVENT from a GST_DEBUG line to reflect recent changes
in the debug logic. Now this plugin compiles.
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
