Tim-Philipp Müller
5413fd5f20
flvmux: fix writing of creation time
...
Don't write time as e.g. 11:9:42
2015-10-21 11:16:01 +01:00
Havard Graff
240b0ac9f6
flvdemux: output speex vorbiscomment as a GstTagList
...
This is what speexdec expects.
https://bugzilla.gnome.org/show_bug.cgi?id=755478
2015-10-11 11:12:27 +01:00
Havard Graff
b6f133ba17
flvmux: GST_BUFFER_OFFSETs should be GST_BUFFER_OFFSET_NONE
...
Or else flvdemux don't understand it
https://bugzilla.gnome.org/show_bug.cgi?id=754435
2015-10-11 11:10:20 +01:00
Havard Graff
cf3a2294da
flvmux: use time segment and copy timestamps when streamable
...
Add a basic test using speex data to verify timestamping.
https://bugzilla.gnome.org/show_bug.cgi?id=754435
2015-10-11 11:09:08 +01:00
Havard Graff
a937c59acd
flvdemux: speex is also always 16KHz
...
This is just a cosmetic change for the logs, since the right caps
for Speex is being set elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=755479
2015-10-11 11:07:00 +01:00
George Chriss
1afb988256
flvmux: Make the element count in arrays not include end
...
One-line removal of tags_written++
This should fix rtmp output to crtmpserver, and hopefully
noone is expecting that the element count includes the end
element, as different bits of documentation say different
things about whether it should or not.
https://bugzilla.gnome.org/show_bug.cgi?id=661624
2015-09-05 23:45:37 +10:00
Jan Schmidt
db2967125b
flvmux: Store incoming bitrate tags and send in the metadata
...
Apparently the Microsoft Azure RTMP server requires that the
videodatarate and audiodatarate metadata be provided, so
set those, even if it's to 0. Use the actual input bitrate
tags if available.
2015-09-05 23:45:37 +10:00
Jan Alexander Steffens (heftig)
439f98ed9a
flvdemux: Handle seek flags properly
...
Allows for non-keyframe seeks.
https://bugzilla.gnome.org/show_bug.cgi?id=738570
2015-07-06 10:30:42 -04:00
Nicolas Dufresne
bbea34bb6e
flvmux: Insert AVC end of sequence
...
This FLV specific mark is needed to prevent Flow Player (most likely
all Flash base player) from going into buffering state when near EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=751320
2015-06-22 17:24:16 -04:00
Vineeth TM
636d47d2d6
flvdemux: trivial cleanup
...
trivial patch to add proper ( while checking for if(G_UNLIKELY())
https://bugzilla.gnome.org/show_bug.cgi?id=751306
2015-06-22 11:13:32 +01:00
Nicolas Dufresne
212f39ee1d
flvmux: Fix DTS validity check
...
This check was up-side-down, causing a bad timestamp at start
and then all timestamp being delayed.
https://bugzilla.gnome.org/show_bug.cgi?id=751298
2015-06-21 19:23:22 -04:00
Nicolas Dufresne
717265ebfb
flmux: Make sure best_time is initialized
2015-06-12 17:45:23 -04:00
Nicolas Dufresne
2274ca7d07
flvmux: Add negative runtime DTS support
...
This is done by using new feature of the CollectPad clip function
which sets the DTS as a gint64 in the collected data. It also simplify
the code a bit.
https://bugzilla.gnome.org/show_bug.cgi?id=740575
2015-06-12 17:18:24 -04:00
Luis de Bethencourt
9391622579
Rename property enums from ARG_ to PROP_
...
Property enum items should be named PROP_ for consistency and readability.
2015-04-27 11:22:11 +01:00
Tim-Philipp Müller
d753a3eeb1
Remove obsolete Android build cruft
...
This is not needed any longer.
2015-04-26 17:55:07 +01:00
Jan Schmidt
c0d4986c8d
flv: When passing seek event upstream, hold a ref.
...
In case upstream can't handle the seek, make sure we
keep a ref on the event to attempt to handle it ourselves.
2015-03-31 00:20:48 +11:00
Mark Nauwelaerts
33cc1b4854
flvdemux: resurrect some flow return handling
...
https://bugzilla.gnome.org/show_bug.cgi?id=744572
2015-03-29 13:58:56 +02:00
Sebastian Dröge
ac0141b6a0
flvdemux: Only set caps once if they don't change
...
Previously we were setting new caps with the same content for every H264 or
AAC codec_data we found in the stream, spamming everything and causing
renegotiations.
2015-03-24 16:18:53 +01:00
Sebastian Dröge
c9b42951fe
flvdemux: Don't create AAC/H264 caps without codec_data
...
Instead delay creating the caps until we read the codec_data from the stream,
or fail if we get normal data before the codec_data.
AAC raw caps and H264 avc caps always need codec_data, setting caps on the pad
without them is going to make negotiation fail most of the time. Even if we
later set new caps with the codec_data, that's usually going to be too late.
https://bugzilla.gnome.org/show_bug.cgi?id=746682
2015-03-24 16:15:04 +01:00
Sebastian Dröge
5e88b53212
flvdemux: Fix indention
2015-03-24 15:39:40 +01:00
Jan Alexander Steffens (heftig)
be8e3196a3
flvdemux: Don't repeatedly warn after no_more_pads (v2)
...
This can get rather spammy for such a high log level.
Only warn once per stream.
https://bugzilla.gnome.org/show_bug.cgi?id=746274
2015-03-16 12:01:43 +00:00
Jan Alexander Steffens (heftig)
ac8a272381
flvdemux: Introduce constant for no-more-pads threshold
...
https://bugzilla.gnome.org/show_bug.cgi?id=746274
2015-03-16 12:01:43 +00:00
Jan Alexander Steffens (heftig)
f2a1f74cec
flvdemux: Fix warning to contain 'video'
...
https://bugzilla.gnome.org/show_bug.cgi?id=746274
2015-03-16 12:01:43 +00:00
Jan Schmidt
2e00311fe1
flvdemux: Use gst_video_guess_framerate()
...
Use gst_video_guess_framerate() from libgstvideo to guess
sensible common framerates where possible from the
floating point fps in the stream.
2015-02-12 23:38:47 +11:00
Jan Alexander Steffens (heftig)
bf73d834b2
flvdemux: Restrict resyncing to TS regressions
...
The behavior of resyncing video and audio indepen-
dently can cause A/V desyncs. Lets restrict resyncs
to jumps backward for now.
https://bugzilla.gnome.org/show_bug.cgi?id=736397
2014-11-19 11:58:19 -05:00
Sanjay NM
ba4b9b22d0
flv: Removed unreachable break statements
...
https://bugzilla.gnome.org/show_bug.cgi?id=736884
2014-09-18 09:42:43 -04:00
Nicolas Dufresne
356defdfea
flvmux: Fallback to PTS if DTS is missing
...
Fixing a regression introduce when fixing:
https://bugzilla.gnome.org/show_bug.cgi?id=731352
2014-08-28 15:05:56 -04:00
Nicolas Dufresne
a7a3cb343a
flvmux: Correctly offset timestamp
...
The previous method would break AV sync in the case audio or video
didn't start at the same point in running time.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
2014-08-27 21:09:57 -04:00
Nicolas Dufresne
aa5bd99127
flvmux: Save dts from buffer
...
We no longer set dts in muxed buffer. This would lead to encoding tags
with timestamp 0 instead of the timestamp of previous buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
2014-08-27 21:08:21 -04:00
Nicolas Dufresne
c1e7bec616
flvmux: Ensure Timestamp starts at 0
...
FLV documentation stipulates that timestamp must start at zero.
In order to respect this rule, keep the first timestamp around
and offset the timestamp from this value. This allow for longer
recording time in presence of timestamp that does not start
at 0 already.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
2014-08-26 16:46:03 -04:00
Nicolas Dufresne
ff2bce7b26
flv: Tag timestamp are DTS not PTS
...
The tags in FLV are DTS. In audio cases, and for many video format this makes
no difference, but for AVC with B-Frames, PTS need to be computed from
composition timestamp CTS, with PTS = DTS + CTS.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
2014-08-26 16:45:59 -04:00
Tim-Philipp Müller
6ee2665b7c
flvdemux: fix indentation
2014-08-13 11:59:39 +01:00
Tim-Philipp Müller
9afeb9652b
flvdemux: un-break duration querying
...
Commit 2b9493b5
broke this in two ways: a) we should only
pass duration queries in TIME format upstream (or at least
not those in DEFAULT or BYTE format), and b) we mustn't
overwrite the default value of 'res' from TRUE to FALSE
and not set it again later. This led to bogus durations
being reported for FLV playback from file, because TIME
queries would fail (as 'res' had been set to FALSE) and
parsers then do a BYTE query as fallback and try to
guesstimate something in return, which of course goes
horribly wrong since the BYTE size returned is for the
muxed file.
2014-08-13 11:59:39 +01:00
Tim-Philipp Müller
e9f2d63011
flvdemux: fix speex caps
...
Decoder complains about "notification: Invalid mode encountered.
The stream is corrupted" though, even if it works, so there's
probably something wrong with the generated codec headers.
2014-06-26 13:50:19 +01:00
Tim-Philipp Müller
d98b996523
flvmux: fix speex in FLV
...
Speex in FLV is always mono @ 16kHz, see
http://download.macromedia.com/f4v/video_file_format_spec_v10_1.pdf
section E.4.2.1: "If the SoundFormat indicates Speex, the audio is
compressed mono sampled at 16 kHz, the SoundRate shall be 0, the
SoundSize shall be 1, and the SoundType shall be 0"
Also see https://bugzilla.gnome.org/show_bug.cgi?id=683622
2014-06-26 13:43:33 +01:00
Edward Hervey
f7fc8d74c9
flvdemux: Attempt upstream seek first
...
If we have an upstream element that can handle the seek (such as
rtmpsrc), try to do that first before attempting it ourself.
2014-06-09 10:04:38 +02:00
Edward Hervey
2b9493b5f0
flvdemux: Query duration upstream first
...
Upstream elements (like rtmpsrc) might be able to provide the duration
more accurately than flvdemux. Especially with index-less vod files
2014-06-05 09:38:29 +02:00
Jan Alexander Steffens (heftig)
303883752e
flvdemux: set RESYNC buffer flag when bridging large PTS gaps
...
So downstream gets notified when this happens.
https://bugzilla.gnome.org/show_bug.cgi?id=725903
2014-06-04 10:28:47 -04:00
Thiago Santos
3b887887be
flvdemux: Use GstFlowCombiner
...
Use the flow combiner to have the standard combination results and avoid
repeating the same code
https://bugzilla.gnome.org/show_bug.cgi?id=709224
2014-05-26 19:51:07 -03:00
Edward Hervey
6c4882996f
flvdemux: Don't use WARNING for not-linked flow return
...
Pollutes debug logs for no reason. It's only an error if all pads
return not-linked
2014-05-12 13:46:01 +02:00
Edward Hervey
c09b14c931
flvdemux: Skip unknown tags in push-mode
...
We add a new mode (SKIP) in push-mode to skip tags that we don't known about
Partially fixes https://bugzilla.gnome.org/show_bug.cgi?id=670712
2014-05-12 13:45:06 +02:00
Tim-Philipp Müller
d506409af5
docs: get rid of 'Since: 0.10.x' markers
...
And some gtk-doc markup fixes.
2013-11-18 14:47:35 +00:00
Tim-Philipp Müller
771ffe5609
flvmux: fix broken sample pipeline
...
which was muxing raw audio and video into flvmux, which won't work,
even if there were converters.
2013-10-12 20:44:31 +01:00
Tim-Philipp Müller
29effb522a
flvmux: require stream-format=raw for mpeg-2 too, but don't require framed field
...
raw implies that it's framed already. Fixes .. ! faac ! flvmux
2013-10-12 20:37:41 +01:00
Tim-Philipp Müller
a5532b4510
flvdemux: don't leak stream_id string
...
https://bugzilla.gnome.org/show_bug.cgi?id=705142
2013-07-30 14:28:19 +01:00
Sebastian Dröge
2e35b36aab
gst: Don't swap start/stop for negative rates in the SEGMENT query
2013-07-29 12:12:41 +02:00
Sebastian Dröge
d135373beb
flvdemux: Implement SEGMENT query
2013-07-29 10:53:47 +02:00
Sebastian Dröge
1122698491
flvdemux: Add support for group-id in the stream-start event
2013-07-22 15:30:12 +02:00
Alban Browaeys
97015d3c93
flvdemux: Add flvversion 1 to the flash-video caps
...
This allows using avdec_flv which requires this field to be
present in the caps. FLV only supports flash-video version 1
right now.
https://bugzilla.gnome.org/show_bug.cgi?id=703076
2013-07-01 11:43:46 +02:00
Sebastian Dröge
ab275b62a8
flvdemux: Don't forward CAPS events from upstream
...
Just use the default pad event handler.
https://bugzilla.gnome.org/show_bug.cgi?id=701976
2013-06-11 12:27:19 +02:00