Commit graph

445 commits

Author SHA1 Message Date
Thibault Saunier
5e448921d8 ges: Move TimeOverlayClip out of GESTestClip
This was complexifying the implementation for very little gain.
Each source type should ideally have its own API.

In that patch we make it so we do not have to subclass anything
but instead use GESAsset to pass information about how the pipeline
should look like.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/175>
2020-05-19 13:27:13 +00:00
Henry Wilkes
9161c2efcb asset: unref requested assets
Prevent a few memory leaks in the tests.

Also mark ges_project_save as transfer full for the formatter asset.

Also make sure that ges_project_request_sync is transfer full on the
returned asset.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/issues/104

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 10:06:52 +01:00
Henry Wilkes
0fab5f45cb clip: enforce duration-limit
Prevent setting of properties or that of children, if the clip would not
be able to set the corresponding duration if the duration-limit would
drop below the currently set duration.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 10:06:52 +01:00
Henry Wilkes
fd353705b9 clip: make sure core child is active for non-core in same track
Each active non-core child must have a corresponding active core child
in the same track. Therefore, if we de-activate a core child, we also
need to de-activate all the non-core children in the same track.
Similarly, if we activate a non-core child, we need to activate the
corresponding core child as well.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00
Henry Wilkes
0a3da79e97 clip: preserve auto-transition in split
When splitting a clip, keep the auto-transition at the end of the clip
alive and move its source to that of the corresponding split track
element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00
Henry Wilkes
5c546c6fe7 clip: change order of split
We first change the duration of the splitted clip, then we add the new
clip to the layer and assign the tracks for its children. Normally, when
a clip is added to a layer it will have its track elements created, if
needed, and then assigned to their tracks. This will fail if any sources
would fully or triple overlap existing sources in the same track.

However, here we were adding the clip to the layer *and* avoiding the
track assignment process and instead setting the tracks explicitly. In
particular, the order was:

+ add new clip to layer with no tracks assigned
+ shrink the split clip
+ assign the tracks for the new clip

This has been changed to:

+ shrink the split clip
+ add new clip to layer with no tracks assigned
+ assign the tracks for the new clip

Thus, the order of events for any users connecting to object signals
will be close to that of adding another clip to the layer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00
Henry Wilkes
faa9d3990b timeline: make sure appended layer has lowest priority
Make sure that the priority of an appended layer is the lowest (highest
in value) when appending a layer to the timeline. This change is
important when appending a layer to a timeline, which can easily have a
gap in priorities if a layer has been removed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00
Henry Wilkes
cdac205db6 clip: remove children if failed to add to layer
If adding to a layer fails during ges_timeline_add_clip, any new children
that were created during this process should be removed from the clip to
put it back into its previous state.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00
Henry Wilkes
39097f5574 timeline-tree: simplify and fix editing
Editing has been simplified by breaking down each edit into a
combination of three basic single-element edits: MOVE, TRIM_START, and
TRIM_END.

Each edit follows these steps:
+ Determine which elements are to be edited and under which basic mode
+ Determine which track elements will move as a result
+ Snap the edit position to one of the edges of the main edited element,
  (or the edge of one of its descendants, in the case of MOVE), avoiding
  moving elements.
  NOTE: in particular, we can *not* snap to the edge of a neighbouring
  element in a roll edit. This was previously possible, even though the
  neighbour was moving!
+ Determine the edit positions for clips (or track elements with no
  parent) using the snapped value. In addition, we replace any edits of
  a group with an edit of its descendant clips. If any value would be
  out of bounds (e.g. negative start) we do not edit.
  NOTE: this is now done *after* checking the snapping. This allows the
  edit to succeed if snapping would cause it to go from being invalid to
  valid!
+ Determine whether the collection of edits would result in a valid
  timeline-configuration which does not break the rules for sources
  overlapping.
+ If all this succeeds, we emit snapping-started on the timeline.
+ We then perform all the edits. At this point they should all succeed.

The simplification/unification should make it easier to make other
changes.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/issues/97
Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/issues/98

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00
Henry Wilkes
a6b13ce619 group: fix priority setting
Stop moving the group if a child clip is being edited by timeline-tree,
a child group is updating its own priority, or a layer that a clip is in
has changed priority. A group should only move if a descendant moves
layers outside of a timeline-tree edit, or the priority of the group is
set by the user.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/issues/89

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00
Henry Wilkes
4b62749336 clip: add the duration-limit property
The duration-limit is the maximum duration that can be set for the clip
given its current children and their properties. If a change in the
children properties causes this to drop below the current duration, it
is automatically capped by this limit.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00
Henry Wilkes
4daa0ecba4 timeline: fix adding track when layers contains clips
Made sure that adding a new track only uses select-tracks-for-object for
core children to determine whether a track elements should be added to the
new track or not, and *not* any other track. In particular, there should
be *no* change in the existing tracks of the timeline when adding another
track. Moreover, a new track should not invoke the creation of track
elements for other tracks.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/160>
2020-04-29 12:32:52 +00:00
Henry Wilkes
dc9dbddbae nleobject: stop using media-duration-factor
The property had been deprecated and is unused.

This property is not needed. Any internal time effect that an nleoperation
wraps is itself responsible for converting seek/segment timestamps.
Previously, the ghostpads were performing a rate conversion after the
rate element had already done so, essentially doubling their effect on
seeks and segment times. This was always unnecessary, but went unnoticed
by the tempochange test because it was using an identity element rather
than an actual rate-changing element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/160>
2020-04-29 12:32:52 +00:00
Thibault Saunier
5dd4175fc3 test: tempochange: Plug leak
CID: 1455448
2020-04-10 11:12:12 -04:00
Thibault Saunier
8f4688811f ges: Always check return value of ges_container_add
Making coverity happy

CIDs: 1461460, 1461461, 1461462, 1461463, 1461464, 1461465, 1461466, 1461468,
2020-04-10 11:12:12 -04:00
Henry Wilkes
f698408176 clip: tidy grouping
Make the grouping of clips cleaner by checking that the clips share the
same asset.
2020-04-08 14:35:28 +01:00
Henry Wilkes
067304a05f auto-transition: select track directly
By-pass the select-tracks-for-object signal for auto-transitions since
their track element must land in the same track as the elements it is
the auto-transition for.
2020-04-08 14:35:28 +01:00
Henry Wilkes
269c2d1dc0 timeline: re-handle clip children track selection
The way a clip's track elements are added to tracks was re-handled. This
doesn't affect the normal usage of a simple audio-video timeline, where
the tracks are added before any clips, but usage for multi-track
timelines has improved. The main changes are:

+ We can now handle a track being selected for more than one track,
  including a full copy of their children properties and bindings.
  (Previously broken.)
+ When a clip is split, we copy the new elements directly into the same
  track, avoiding select-tracks-for-object.
+ When a clip is grouped or ungrouped, we avoid moving the elements to
  or from tracks.
+ Added API to allow users to copy the core elements of a clip directly
  into a track, complementing select-tracks-for-object.
+ Enforced the rule that a clip can only contain one core child in a
  track, and all the non-core children must be added to tracks that
  already contains a core child. This extends the previous condition
  that two sources from the same clip should not be added to the same
  track.
+ Made ges_track_add_element check that the newly added track element
  does not break the configuration rules of the timeline.
+ When adding a track to a timeline, we only use
  select-tracks-for-object to check whether track elements should be
  added to the new track, not existing ones.
+ When removing a track from a timeline, we empty it of all the track
  elements that are controlled by a clip. Thus, we ensure that a clip
  only contains elements that are in the tracks of the same timeline, or
  no track. Similarly, when removing a clip from a timeline.
+ We can now avoid unsupported timeline configurations when a layer is
  added to a timeline, and already contains clips.
+ We can now avoid unsupported timeline configurations when a track is
  added to a timeline, and the timeline already contains clips.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/issues/84
2020-04-08 14:35:28 +01:00
Henry Wilkes
a93e873402 clip: allow arbitrary max-duration when no core children
Before the max-duration could be set arbitrarily when the clip was empty,
to indicate what the max-duration would be once the core children were
created. Now, we can also do this whilst the clip only contains non-core
children.
2020-04-07 11:17:54 +01:00
Henry Wilkes
6e55a6556f container: change ownership when adding
Make sure we sink the child on adding, and keep it alive until the end
in case the method fails.

Also, since the child mappings hold a ref to the child, they should give
them up in their free method. This way, the ref will be given up on
disposing, even if ges_container_remove fails.

Also, reverse setting of the start of the container if adding fails.
2020-04-07 09:34:12 +01:00
Thibault Saunier
ddaf67fed3 ges: Deprecate GESImageSource and GESMultiFileSource
Refactoring GESVideoSource so that #GESUriVideoSource can handle
still image in a simple way

MultiFileSource has been replaced with the new `imagesequencesrc`
element, this was totally broken anyway as `multifilesrc` can not seek
properly.
2020-03-30 06:54:22 -03:00
Thibault Saunier
cec1dd3302 tests: Cleanup test files handling 2020-03-25 18:00:09 -03:00
Thibault Saunier
ff2180b284 ges: Use #pragma once everywhere 2020-03-19 21:09:18 +00:00
Thibault Saunier
314db9f1bd clip: Allow setting max-duration clips without TrackElements
Otherwise this breaks quite a few assumption in user code, several
pitivi tests broke because of that.
2020-03-18 21:58:11 -03:00
Henry Wilkes
658e64432d timeline-element: make max-duration cap in-point
Do not allow the in-point to exceed the max-duration of any timeline
element.
2020-03-16 14:19:52 +00:00
Henry Wilkes
d03e0fa8c5 clip: only allow children with the same timeline
Refuse the addition of children whose timeline is neither NULL nor the
clip's timeline.
2020-03-16 14:19:52 +00:00
Henry Wilkes
cd9cba55c0 clip: re-handle child in-point and max-duration
The in-point of a clip is kept in sync with its core children, unless they
have no has-internal-source.

The max-duration is defined as the minimum max-duration amongst the
clip's core children. If it is set to a new value, this sets the
max-duration of its core children to the same value if they have
has-internal-source set as TRUE.

Non-core children (such as effects on a source clip) do not influence
these values.

As part of this, we no longer track in-point in GESContainer. Unlike start
and duration, the in-point of a timeline element does not refer to its
extent in the timeline. As such, it has little meaning for most
collections of timeline-elements, in particular GESGroups. As such, there
is no generic way to relate the in-point of a container to its children.
2020-03-16 14:19:52 +00:00
Henry Wilkes
dc4ca15ba8 clip: copy and paste control bindings
Previously the control bindings were not properly copied into the pasted
clip. Also changed the order so that elements are added to the clip
before the clip is added to the timeline.
2020-03-16 14:19:52 +00:00
Henry Wilkes
c63fb5db0e timeline-element: add signals for child properties
Add the child-property-added and child-property-removed signals to
GESTimelineElement.

GESContainer is able to use this to keep their child properties in sync
with their children: if they are added or removed from the child, they
are also added or removed from the container.
2020-03-16 14:19:52 +00:00
Henry Wilkes
74ae0ba5df container: freeze notifies during add and remove
Hold the notify signals for the container and the children until after
the child has been fully added or removed.

After the previous commit, this was used to ensure that the
notify::priority signal was sent for children of a clip *after* the
child-removed signal. This stopped being the case when the code in
->child_removed was moved to ->remove_child (the latter is called before
the child-removed signal is emitted, whilst the former is called
afterwards). Rather than undo this move of code, which was necessary to
ensure that ->add_child was always reversed, the notify::priority signal
is now simply delayed until after removing the child has completed. This
was done for all notify signals, as well as in the add method, to ensure
consistency.

This allows the test_clips.py test_signal_order_when_removing_effect to
pass.

Also make subclasses take a copy of the list of the children before
setting the start and duration, since this can potentially re-order the
children (if they have the SET_SIMPLE flag set).
2020-03-16 14:19:52 +00:00
Henry Wilkes
91b5a5804a clip: only allow core elements as children
Only allow elements that were created by ges_clip_create_track_elements
(or copied from such an element) to be added to a clip. This prevents
users from adding arbitrary elements to a clip.

As an exception, a user can add GESBaseEffects to clips whose class
supports it, i.e. to a GESSourceClip and a GESBaseEffectClip.

This change also introduces a distinction between the core elements of a
clip (created by ges_clip_create_track_elements) and non-core elements
(currently, only GESBaseEffects, for some classes). In particular,
GESBaseEffectClip will now distinguish between its core elements and
effects added by the user. This means that the core elements will always
have the lowest priority, and will not be listed as top effects. This is
desirable because it brings the behaviour of GESBaseEffectClip in line
with other clip types.
2020-03-16 14:19:51 +00:00
Thibault Saunier
6b7c658b6a ges: Make setting start/duration move or trim generic
We were implementing the logic for moving/trimming elements specific
to SourceClip but this was not correct ass the new timeline tree allows
us to handle that for all element types in a generic and nice way.

This make us need to have groups trimming properly implemented in the
timeline tree, leading to some fixes in the group tests.

This adds tests for the various cases known to not be handled properly
by the previous code.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/issues/92
2020-03-09 11:48:37 -03:00
Henry Wilkes
7f65b7be0c asset: fix handling of proxies
Previous usage of the property proxy-target seemed to alternate between
the two definitions:
+ The asset we are the default proxy of
+ The asset we are in the proxy list of
Now, the latter definition is used, which seems more useful to a user
since knowing the latter can easily allow you to find out the former.

The previous behaviour of ges_asset_set_proxy (asset, NULL) was not very
clear. It is now defined so that it clears all the proxies for 'asset'.
This means that after this call, the GESAsset:proxy property will indeed
be NULL.

Also fixed:
+ We can call ges_asset_set_proxy (asset, proxy) when 'proxy' is already
  in the proxy list of 'asset'.
+ Handling of removing the default proxy in ges_asset_unproxy. This was
  sending out the wrong notifies.
+ Prohibiting circular proxying. Before we could only prevent one case,
  we should now be able to prevent all cases. This will prevent a hang
  in ges_asset_request.
2020-03-05 17:04:51 -03:00
Henry Wilkes
b03915bc87 test: remove asset test that needs internal method
The test_proxy_asset test needs the internal method
ges_asset_finish_proxy. The test also uses the associated internal methods
ges_asset_try_proxy and ges_asset_cache_lookup. However, these are
marked with GES_API in ges-internal.h, which allows us access to them
here.
The new method is not marked as GES_API because it would not allow us to
remove the method in the future without removing it from the symbols list.
We do not want to add to the problem.

The test was simply commented out since we may wish to support tests
that access internal methods in the future using meson.
2020-03-05 17:04:51 -03:00
Henry Wilkes
c12b84788d asset: move set_proxy (NULL, proxy) behaviour to new method
We should not be accepting ges_asset_set_proxy (NULL, proxy) as part of
the API! This behaviour was used internally in combination with
ges_asset_try_proxy, which is called on a still loading asset, so it was
moved to ges_asset_finish_proxy.
2020-03-05 17:04:51 -03:00
Thibault Saunier
df6058c802 framepositioner: Stop lying about the source size
Basically we were advertising that the source size would be the
size of the track if it hadn't been defined by end user, but since
we started to let scaling happen in the compositor, this is not true
as the source size is now the natural size of the underlying video
stream.

Remove the unit test and reimplemented using a validate scenario which
make the test much simpler to read :=)
2020-02-26 13:36:30 -03:00
Henry Wilkes
7b5f655c9a ges-source-clip: fixed return of duration setter
In general, brought the behaviour of the `start`, `duration` and
`inpoint` setters in line with each other. In particular:
1. fixed return value the GESSourceClip `duration` setter
2. changed the GESClip `start` setter
3. fixed the inpoint callback for GESContainer
4. changed the type of `res` in GESTimelineElement to be gint to
   emphasise that the GES library is using the hack that a return of -1
   from klass->set_duration means no notify signal should be sent out.

Also added a new test for clips to ensure that the setters work for
clips within and outside of timelines, and that the `start`, `inpoint`
and `duration` of a clip will match its children.
2019-12-14 18:12:51 +00:00
Henry Wilkes
44420b2e56 marker: add color meta
Support optionally coloring markers by reserving GES_META_MARKER_COLOR
for an ARGB guint.
2019-10-24 09:45:19 +00:00
Henry Wilkes
cab4a52dde marker-list: add prev position to ::marker-moved
Additionally give the previous marker position in the
GESMarkerList::marker-moved signal, since a user may want to know
where a move was from.

Also, fixed the documentation for GESMarkerList::marker-added

https://gitlab.freedesktop.org/gstreamer/gst-editing-services/issues/78
2019-10-16 17:58:15 +01:00
Tim-Philipp Müller
0c96b9dd10 Remove autotools build system
Todo:
 - hook up data/completions/ges-launch-1.0 in Meson (#77)
2019-10-13 13:54:19 +01:00
Millan Castro
68288a76f7 markerlist: implement GESMarkerList
Co-authored by Mathieu Duponchelle <mathieu@centricular.com>
2019-08-22 21:24:02 +02:00
Thibault Saunier
955d177dd6 formatter: Plug lists of TimedValue leak 2019-07-26 13:48:52 -04:00
Thibault Saunier
c125093bb1 xml-formatter: Fix loading sources
And fix the project file which couldn't be load now that we
properly check clips coherency
2019-07-26 13:48:51 -04:00
Thibault Saunier
dafc1cd8d1 tests: Simply include ges-internal.h instead of redefining the same macros 2019-05-23 17:16:27 -04:00
Thibault Saunier
2d8be79cb7 xml-formatter: Fix some asset leaks 2019-04-15 17:11:48 -04:00
Thibault Saunier
86ac3b3159 tests: Plug misc leaks 2019-04-15 17:11:48 -04:00
Thibault Saunier
cfd5fda38d title: Deprecate method that return newly allocated const gchar*
This is just plain broken 190643508f
but we can't do anything about it.
2019-04-15 17:11:48 -04:00
Thibault Saunier
2b79c0db5e tests: Avoid random timeout and let the launcher set it up for us 2019-04-15 17:11:48 -04:00
Thibault Saunier
adc4843f53 xml-formatter: Plug leaks of pending groups 2019-04-15 17:11:48 -04:00
Thibault Saunier
7f0810bae7 Fix splitting control bindings leaks 2019-04-15 17:11:48 -04:00