Used by some proprietary software for their fragmented files.
Adds some support for multi-stream fragmented files
Flow is as follows.
1. The first 'fragment' is written as a self-contained fragmented
mdat+moov complete with an edit list and durations, tags, etc.
2. Subsequent fragments are written with a mdat+moof and each stream is
interleaved as data arrives (currently ignoring the interleave-*
properties). data-offsets in both the traf and the trun ensure
data is read from the correct place on demuxing. Data/chunk offsets
are also kept for writing out the final moov.
3. On finalisation, the initial moov is invalidated to a hoov and the
size of the first mdat is extended to cover the entire file contents.
Then a moov is written as regularly would in moov-at-end mode (the
default).
This results in a file that is playable throughout while leaving a
finalised file on completion for players that do not understand
fragmented mp4.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/643>
When we are fragmented, the edit list may only refer to the portion of
the media that is in the moov. Extend the edit list stop time when we
if there is only one qt segment and we are reading a fragmented file.
Fixes playback of some fragmented mp4 files generated by proprietary
programs.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/643>
This is modelled after the DASH Common Encryption scheme, but is somewhat
simpler as more parts are fixed, i.e. just one encryption scheme.
The output caps are fixed to 'application/x-aavd'. All information
required for decryption are part of the 'adrm' atom, which is passed
on as a property. The property is attached to the buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/577>
The 'aavd' box is contained in the 'stsd' sample description. The 'aavd'
box follows the layout of an 'mp4a' entry, i.e. it contains a single
standard 'esds' extension box, and the two proprietary 'adrm' and 'aabd'
extension boxes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/577>
- Release the split mux lock while removing the probes
- Flush the sinkpad to unblock other pads
- Turn check_completed_gop into a do while statement, when
waking up we want to recheck whether the current GOP is
ready for sending
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/719>
The code seems to use `continue` and `break` as if both refer to the
surrounding `while` loop. But because `break` breaks out of the
`switch`, they actually have the same effect.
This may have caused the loop not to terminate when it should. E.g. when
`skip_backwards_streams` drops a buffer we should abort the aggregation
and wait for all pads to be filled again. Instead, we might have just
selected a subsequent pad as our new "best".
Replace `break` with `done = TRUE; break`, and `continue` with `break`.
Then simplify the code a bit.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/710>
When we are dropping a buffer in find_best_pad (e.g. waiting for a
keyframe, or skipping backwards timestamp), return
GST_AGGREGATOR_FLOW_NEED_DATA to make sure we have enough data at the
next run. Otherwise, a stream that accidentally fell behind (e.g.
relinking race, or just waiting for a keyframe) will never get the
opportunity to catch up to the other one, because the other one will
always keep advancing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/696>
* Trying to disconnect a stream from a running splitmuxsink by flushing
it results in the FLUSH_START blocking in the stream queue's
gst_pad_pause_task because the flush did not unblock
complete_or_wait_on_out, so add a check for ctx->flushing there.
* Add a GST_SPLITMUX_BROADCAST_INPUT so check_completed_gop notices
flushing changed and the incoming push is unblocked.
* Pass the FLUSH_STOP along to the muxer without waiting.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/687>
GCC 10 was complaining like following. It really is complaining about default cases returning
with potentially unitialized *desval, but those cases in the switch should never be hit.
```
../subprojects/gst-plugins-good/gst/auparse/gstauparse.c: In function 'gst_au_parse_chain':
../subprojects/gst-plugins-good/gst/auparse/gstauparse.c:481:37: error: 'timestamp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
481 | GST_BUFFER_TIMESTAMP (outbuf) = timestamp;
../subprojects/gst-plugins-good/gst/auparse/gstauparse.c:482:36: error: 'duration' may be used uninitialized in this function [-Werror=maybe-uninitialized]
482 | GST_BUFFER_DURATION (outbuf) = duration;
../subprojects/gst-plugins-good/gst/auparse/gstauparse.c:480:34: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
480 | GST_BUFFER_OFFSET (outbuf) = offset;
cc1: all warnings being treated as errors
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/671>
This identifiers are registered in the MPEG-RA and defined
to be used by the Dolby Vision AVC/HEVC streams.
This is a first step to present the stream to the decoder.
Additional box parsing of DOVIConfigurationBox is necessary
to complete the media presentation with proper Dolby Vision
enhancements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/658>
Previously, the user input for stsd entries is trusted completely, and
so a maliciously crafted file could choose the length of the stsd
entries arbitrarily and cause qtdemux to try to allocate up to 2GB of
memory (half of a 32 bit max int).
This patch fixes this by sanity checking the stsd input against the
size of the entire stsd atom.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/670>
During trak parsing, we need to check for the existence of stsd_entries,
otherwise, we end up with a NULL pointer to them. It is entirely
possible for the stsd to exist, but for it to have no entries, which the
previous checks did not take into account.
This patch adds a simply check to ensure that all files that do not
contain a stsd entry are deemed corrupt, and adds a test case to prevent
a regression.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/670>
Previously imagefreeze would always operate as non-live element and
output frames as fast as possible according to the configured segment
(via SEEK events) and the negotiated framerate from start to stop or the
other way around.
With the new live mode (enabled via the is-live property) it would only
output frames in PLAYING. Frames would be output according to the
negotiated framerate unless it would be too late, in which case it would
jump ahead and skip over the requirement amount of frames.
This makes it possible to actually use imagefreeze in live pipelines
without having to manually ensure somehow that it would start outputting
at the current running time and without still risking to fall behind
without recovery.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/653>
