Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (remove_from_group),
(gst_opt_scheduler_pad_link):
fix 147894-2 and the group_link problem.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (gst_opt_scheduler_init),
(create_chain), (destroy_chain), (create_group), (destroy_group),
(add_to_group), (merge_groups), (group_elements), (group_inc_link),
(group_dec_link), (gst_opt_scheduler_pad_link),
(group_inc_links_for_element), (group_migrate_connected):
Call group_inc_link with the proper src->sink ordering --
break this, and we break sort_chain. patch from wingo for bug
147713.
Partially revert patch 1.89. When adding a loop based element to
the scheduler, the links to other groups are automatically followed
and incremented. This should not happen because the bin will call
pad_link explicitly for those connection, resulting in them counted
twice. Results in assertion failure on pipeline cleanup.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (group_dec_link),
(gst_opt_scheduler_pad_link), (group_migrate_connected):
Fix stupid warning when an element is to be migrated but
is already migrated.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (group_dec_link),
(gst_opt_scheduler_pad_link), (group_migrate_connected):
Make sure that a single non-loop-based element does not
end up in a group. This fixes the testsuite again.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (create_group),
(add_to_group), (merge_groups), (schedule_group),
(gst_opt_scheduler_get_wrapper), (group_elements),
(group_dec_link), (gst_opt_scheduler_pad_link),
(group_migrate_connected), (gst_opt_scheduler_pad_unlink),
(gst_opt_scheduler_iterate):
move isolated groups to a new chain.
Emit a warning instead of segfaulting in some error cases.
Fix a bug where the link count between groups was not calculated
correctly. Fixes#144510.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c:
(gst_opt_scheduler_pad_link), (group_elements_set_visited),
(element_get_reachables_func), (element_get_reachables),
(debug_element), (rechain_group), (group_migrate_connected),
(gst_opt_scheduler_pad_unlink):
Do not try to migrate decoupled elements to a new group since
they are not added to groups.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c:
(chain_recursively_migrate_group), (create_group),
(schedule_group), (gst_opt_scheduler_pad_link),
(group_elements_set_visited), (element_get_reachables_func),
(element_get_reachables), (group_can_reach_group), (debug_element),
(rechain_group), (group_migrate_connected),
(gst_opt_scheduler_pad_unlink):
* testsuite/schedulers/Makefile.am:
Implemented group splitting and rechaining.
Fixes 143777 and 143777-2 in the testsuite.
Original commit message from CVS:
* gst/autoplug/gstspideridentity.c: (gst_spider_identity_chain):
extra debugging
* gst/gstevent.h:
* gst/gstinfo.c: (gst_debug_log_default):
print time nicely. add thread pointer until someone figures out
a completely portable way of getting at thread id's.
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_try),
(_invent_event), (gst_pad_pull), (gst_pad_event_default_dispatch),
(gst_pad_call_chain_function):
extra debugging
* gst/schedulers/gstoptimalscheduler.c:
(get_group_schedule_function), (loop_group_schedule_function),
(gst_opt_scheduler_loop_wrapper), (gst_opt_scheduler_get_wrapper),
(pad_clear_queued), (gst_opt_scheduler_iterate):
rename BUFPEN and friends to DATAPEN since that's what they are.
Original commit message from CVS:
- removing some trailing commas in enums to please C90 only compilers (AIX, Forte, ...)
('should' fix#143290)
should/could we compile gst with -ansi -pedantic to catch those in the build-bots ?
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (remove_from_chain),
(chain_group_set_enabled), (create_group), (add_to_group),
(merge_groups), (setup_group_scheduler), (group_elements),
(gst_opt_scheduler_iterate), (gst_opt_scheduler_show):
Don't try to follow the pad connections with other groups
when a loop based element is added to the scheduler because
the bin will inform the scheduler about the pad links a little
later.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (add_to_chain),
(remove_from_chain), (chain_group_set_enabled),
(setup_group_scheduler), (group_element_set_enabled),
(gst_opt_scheduler_state_transition), (gst_opt_scheduler_iterate),
(gst_opt_scheduler_show):
Elements without a group can do a state change as well, just wait
with the setup of the scheduling function when it is added to a
chain.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (add_to_chain),
(remove_from_chain), (chain_group_set_enabled), (add_to_group),
(merge_groups), (setup_group_scheduler),
(group_inc_links_for_element), (gst_opt_scheduler_iterate),
(gst_opt_scheduler_show):
Fixes to maintain internal consistency of the scheduler data
structures.
- adding an enabled group to a chain should increment the
number of enabled elements in that chain.
- removing an enabled group from a chain could disable the
chain.
- removing a disabled group from a chain could enable the
chain.
- add g_assert when internal inconsistency is detected.
- adding an element to a group could increase the number of
links this group has with other groups.
- merging two groups also merges the chains.
- also show group links in the _show method.
Please report regressions ASAP, so I can fix them.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (remove_from_group),
(setup_group_scheduler), (gst_opt_scheduler_pad_link):
Fixed an error introduced with patch for 1.63. When setting
a get based element as the entry point in a group, make sure
to mark the group as GET based.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (create_group),
(setup_group_scheduler), (loop_group_schedule_function),
(gst_opt_scheduler_pad_link):
Added some more debug info and fixed a bug where the group
type was set to LOOP but it was in fact unknown.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c: (remove_from_group),
(group_dec_link), (gst_opt_scheduler_pad_unlink):
when removing an element from a group, we always need to
decrement the link count that this group had with other
groups through the element.
added an extra assert to catch inconsistencies when decrementing
the link count.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c
(gst_opt_scheduler_pad_unlink): Check if element is non-NULL and
really is a GstElement. Avoids critical when running gst-launch -v
and a oggdemux/decoding pipeline.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_new),
(gst_pad_link_free), (gst_pad_link_try), (_invent_event),
(gst_pad_pull):
implement enforcing discont events before buffers are passed. This
allows state changes of only some elements and later correctly going
on where they left off (or in short: you can now set audio sinks to
NULL to release the device when the pipeline is paused)
* gst/gstpad.c: (gst_pad_call_chain_function),
(gst_pad_call_get_function):
* gst/gstpad.h:
add gst_pad_call_chain_function and gst_pad_call_get_function for
scheduler interaction. They are required because of the changes
above.
* gst/schedulers/entryscheduler.c: (get_buffer),
(gst_entry_scheduler_chain_wrapper),
(gst_entry_scheduler_get_wrapper),
(gst_entry_scheduler_state_transition),
(gst_entry_scheduler_pad_link):
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_chain_wrapper),
(gst_basic_scheduler_src_wrapper),
(gst_basic_scheduler_chainhandler_proxy),
(gst_basic_scheduler_gethandler_proxy),
(gst_basic_scheduler_cothreaded_chain),
(gst_basic_scheduler_chain_elements):
* gst/schedulers/gstoptimalscheduler.c:
(get_group_schedule_function), (pad_clear_queued),
(gst_opt_scheduler_pad_link):
use the new functions instead of calling get/chain-functions
directly.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_collect_array), (gst_pad_collectv),
(gst_pad_collect), (gst_pad_collect_valist), (gst_pad_selectv),
(gst_pad_select):
* gst/gstpad.h:
* gst/gstscheduler.c: (gst_scheduler_pad_select),
(gst_scheduler_lock_element), (gst_scheduler_unlock_element):
* gst/gstscheduler.h:
implement gst_pad_collect as replacement for gst_pad_select.
deprecate gst_pad_select and gst_scheduler_(un)lock_element
add new flag GST_SCHEDULER_FLAG_NEW_API for API that implements the
new pad_select, lock and unlock calls.
* gst/cothreads.c: (cothread_destroy), (cothread_switch):
* gst/cothreads.h:
* gst/schedulers/cothreads_compat.h:
* gst/schedulers/gthread-cothreads.h:
remove unused cothread_lock and cothread_unlock calls
* gst/schedulers/entryscheduler.c:
(gst_entry_scheduler_class_init), (gst_entry_scheduler_init),
(_can_schedule_loop), (gst_entry_scheduler_get_handler),
(gst_entry_scheduler_pad_select):
update to new API
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_class_init), (gst_basic_scheduler_init),
(gst_basic_scheduler_pad_select):
remove useless lock and unlock calls, update pad_select to new API
(untested)
* gst/schedulers/gstoptimalscheduler.c:
(gst_opt_scheduler_class_init):
remove useless select, lock and unlock function calls
* gst/elements/gstaggregator.c: (gst_aggregator_loop):
use gst_pad_collect instead of gst_pad_select
Original commit message from CVS:
2004-04-03 Andy Wingo <wingo@pobox.com>
* gst/schedulers/gstoptimalscheduler.c (GstOptSchedulerGroupLink):
Rename ->group1 and ->group2 to ->src and ->sink, respectively.
This allows better introspection of pipeline topology.
(add_to_chain): Don't do trickery to put loop elements first;
rather, queue a chain sort by marking the chain as dirty.
(remove_from_chain): Mark the chain dirty.
(sort_chain): New function. Sorts the group list so that terminal
sinks are first. This means elements on the sink side will be
preferentially sscheduled before elements on the src side of the
pipeline.
(chain_recursively_migrate_group): Use OTHER_GROUP_LINK.
(schedule_chain): If the chain is marked DIRTY, call sort_chain.
(gst_opt_scheduler_pad_link, gst_opt_scheduler_pad_unlink)
(group_inc_link): Change argument and variable names to match the
new link structure member names (src and sink).
(group_dec_link): Add some description
Original commit message from CVS:
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_src_wrapper):
* gst/schedulers/gstoptimalscheduler.c:
(gst_opt_scheduler_loop_wrapper), (gst_opt_scheduler_get_wrapper),
(pad_clear_queued), (gst_opt_scheduler_add_element),
(gst_opt_scheduler_remove_element):
fix GStreamer to not have issues with lvalue casts anymore (fixes
some bug, but bugzilla is down)
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c
(gst_opt_scheduler_pad_unlink): Fix bug that causes totem to
crash on MPEG playback. My boolean arithmetic is a bit rusty.
Original commit message from CVS:
* gst/schedulers/gstoptimalscheduler.c
(gst_opt_scheduler_pad_unlink): Implement unlink for elements with
links to elements within the same group, so we can finally remove
that annoying warning. Refactor the code a little bit
(group_dec_links_for_element): Split out
Original commit message from CVS:
2004-03-07 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c (gst_bin_remove): Debugging fixes.
* gst/schedulers/gstoptimalscheduler.c (destroy_group): Assert
there are no links to other groups when a group is destroyed.
(gst_opt_scheduler_pad_unlink): If the unlink means an element is
removed from a group, make sure the link count to elements linked
to other pads is appropriately decremented. This really fixes
#135672.
The 1.60->1.61 patch has been reapplied in light of this fix.
* gst/gstelement.c (gst_element_dispose): Really protect against
multiple invocations this time.
Original commit message from CVS:
2004-03-03 Benjamin Otte <otte@gnome.org>
* gst/schedulers/gstoptimalscheduler.c:
revert last commit by Andy Wingo. It causes segfaults on unreffing
in Rhythmbox. (see bug #135672)
Original commit message from CVS:
2004-02-24 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_dispose): Protect against multiple
invocations.
* gst/schedulers/gstoptimalscheduler.c
I added a mess of prototypes at the top of the file by way of
documentation. Some of the operations on chains and groups were
re-organized.
(create_group): Added a type argument so if the group is enabled,
the setup_group_scheduler knows what to do.
(group_elements): Added a type argument here, too, to be passed on
to create_group.
(group_element_set_enabled): If an unlinked PLAYING element is
added to a bin, we have to create a new group to hold the element,
and this function will be called before the group is added to the
chain. Thus we have a valid case for group->chain==NULL. Instead
of calling chain_group_set_enabled, just set the flag on the group
(the chain's status will be set when the group is added to it).
(gst_opt_scheduler_state_transition, chain_group_set_enabled):
Setup the group scheduler when the group is enabled, not
specifically when an element goes PAUSED->PLAYING. This means
PLAYING elements can be added, linked, and scheduled into a
PLAYING pipeline, as was intended.
(add_to_group): Don't ref the group twice. I don't know when this
double-ref got in here. Removing it has the potential to cause
segfaults if other parts of the scheduler are buggy. If you find
that the scheduler is segfaulting for you, put in an extra ref
here and see if that hacks over the underlying issue. Of course,
then find out what code is unreffing a group it doesn't own...
(create_group): Make the extra refcount floating, and remove it
after adding the element. This means that...
(unref_group): Destroy when the refcount reaches 0, not 1, like
every other refcounted object in the known universe.
(remove_from_group): When a group becomes empty, set it to be not
active, and remove it from its chain. Don't unref it again,
there's no floating reference any more.
(destroy_group): We have to remove the group from the chain in
remove_from_group (rather than here) to break refcounting cycles
(the chain always has a ref on the group). So assert that
group->chain==NULL.
(ref_group_by_count): Removed, it was commented out anyway.
(merge_chains): Use the remove_from_chain and add_to_chain
primitives to do the reparenting, instead of rolling our own
implementation.
(add_to_chain): The first non-disabled group in the chain's group
list will be the entry point for the chain. Because buffers can
accumulate in loop elements' peer bufpens, we preferentially
schedule loop groups before get groups to avoid unnecessary
execution of get-based groups when the bufpens are already full.
(gst_opt_scheduler_schedule_run_queue): Debug fixes.
(get_group_schedule_function): Ditto.
(loop_group_schedule_function): Ditto.
(gst_opt_scheduler_loop_wrapper): Ditto.
(gst_opt_scheduler_iterate): Ditto.
I understand the opt scheduler now, yippee!
* gst/gstpad.c: All throughout, added FIXMEs to look at for 0.9.
(gst_pad_get_name, gst_pad_set_chain_function)
(gst_pad_set_get_function, gst_pad_set_event_function)
(gst_pad_set_event_mask_function, gst_pad_get_event_masks)
(gst_pad_get_event_masks_default, gst_pad_set_convert_function)
(gst_pad_set_query_function, gst_pad_get_query_types)
(gst_pad_get_query_types_default)
(gst_pad_set_internal_link_function)
(gst_pad_set_formats_function, gst_pad_set_link_function)
(gst_pad_set_fixate_function, gst_pad_set_getcaps_function)
(gst_pad_set_bufferalloc_function, gst_pad_unlink)
(gst_pad_renegotiate, gst_pad_set_parent, gst_pad_get_parent)
(gst_pad_add_ghost_pad, gst_pad_proxy_getcaps)
(gst_pad_proxy_pad_link, gst_pad_proxy_fixate)
(gst_pad_get_pad_template_caps, gst_pad_check_compatibility)
(gst_pad_get_peer, gst_pad_get_allowed_caps)
(gst_pad_alloc_buffer, gst_pad_push, gst_pad_pull)
(gst_pad_selectv, gst_pad_select, gst_pad_template_get_caps)
(gst_pad_event_default_dispatch, gst_pad_event_default)
(gst_pad_dispatcher, gst_pad_send_event, gst_pad_convert_default)
(gst_pad_convert, gst_pad_query_default, gst_pad_query)
(gst_pad_get_formats_default, gst_pad_get_formats): Better
argument checks, and some doc fixes.
(gst_pad_custom_new_from_template): Um, does anyone
use these functions? Actually make a custom pad instead of a
normal one.
(gst_pad_try_set_caps): Transpose some checks.
(gst_pad_try_set_caps_nonfixed): Same, and use a macro to check if
the pad is in negotiation.
(gst_pad_try_relink_filtered): Use pad_link_prepare.
* gst/gstelement.c: Remove prototypes also defined in gstclock.h.
* gst/gstelement.h:
* gst/gstclock.h: Un-deprecate the old clocking API, as discussed
on the list.
Original commit message from CVS:
2004-02-20 Andy Wingo <wingo@pobox.com>
* gst/gstbin.c:
* gst/gstbuffer.c:
* gst/gstplugin.c:
* gst/registries/gstxmlregistry.c:
* gst/schedulers/gstoptimalscheduler.c: Debugging tweaks.
* gst/gstelement.c (gst_element_set_scheduler): Debugging fixes.
(gst_element_add_pad): DEBUG->INFO, some fixes.
(gst_element_get_compatible_pad_template): Just see if the
templates' caps intersect, not if one is a strict subset of the
other. This conforms more to what gst_pad_link_intersect() does.
(gst_element_class_add_pad_template): Don't memcpy the pad
template, just ref it.
(gst_element_get_compatible_pad_filtered): Clean up debug messages
* gst/gstpad.c (gst_pad_can_link_filtered): Debug a true result.
(gst_pad_link_filtered): Debug changes.
(gst_pad_link_prepare): New function, consolidated from
can_link_filtered and link_filtered.
* gst/parse/grammar.y (gst_parse_perform_link): Made INFO output
look more like that of the functions in gstelement.c
* gst/gstinfo.c (gst_debug_print_object): Put a space before the
object, and return the empty string if object is NULL.
* gst/parse/parse.l: Remove trailing newlines when calling PRINT.
* gst/parse/grammar.y (YYFPRINTF): Log bison debugging info via
LOG, not DEBUG. We still get flex info on debug.
* gst/registries/gstxmlregistry.c (gst_xml_registry_load): Make
debug string more verbose.
(plugin_times_older_than): DEBUG->LOG.
Original commit message from CVS:
2004-01-13 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst/gstclock.c: (gst_clock_class_init), (gst_clock_init),
(gst_clock_set_speed), (gst_clock_set_active),
(gst_clock_is_active), (gst_clock_reset),
(gst_clock_handle_discont):
* gst/gstclock.h:
deprecate old interface and disable functions that aren't in use
anymore.
* gst/gstelement.h:
* gst/gstelement.c: (gst_element_get_time), (gst_element_wait),
(gst_element_set_time), (gst_element_adjust_time):
add concept of "element time" and functions to get/set this time.
* gst/gstelement.c: (gst_element_change_state):
update element time correctly.
* gst/gstelement.c: (gst_element_get_compatible_pad_filtered):
This is a debug message, not a g_critical.
* gst/gstpad.c: (gst_pad_event_default):
handle discontinuous events right with element time.
* gst/gstscheduler.c: (gst_scheduler_state_transition):
update to clocking fixes.
set clocks on elements in READY=>PAUSED. The old behaviour caused
a wrong element time on the first element that started playing.
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_class_init):
* gst/schedulers/gstoptimalscheduler.c:
(gst_opt_scheduler_class_init):
remove code that just implements the default behaviour.
* gst/elements/gstfakesink.c: (gst_fakesink_chain):
update to use new clocking functions
* testsuite/clock/clock1.c: (gst_clock_debug), (main):
* testsuite/clock/clock2.c: (gst_clock_debug), (main):
update to test new element time.
* gst/autoplug/gstspideridentity.c: (gst_spider_identity_getcaps):
use _get_allowed_caps instead of _get_caps. This catches filtered
caps correctly.
* testsuite/debug/commandline.c:
update for new GST_DEBUG syntax.
* testsuite/threads/Makefile.am:
disable a test that only works sometimes.
Original commit message from CVS:
s/GstBuffer/GstData/ in the API where you can pass events. Fix the plugins to deal with that. Fixes#113488. Also includes scheduler patches, and probably fixes some queue bugs relating to events and buffers.
Original commit message from CVS:
When scheduling a group, check that its not the group thats currently in the
top of the runqueue.
Then, when scheduling a different group, disable the first group and search for the next enabled group to run. Stops deadlocking in loop based elements.
Also remove the g_list_length's from the debugging statements for a bit of speed
Original commit message from CVS:
GST_DEBUG reorganization
This is a big diff (ca 450k), containing loads of stuff:
- gstinfo.[ch] complete rewrite
- changing of all GST_DEBUG messages to reflect that change
- reorganization of subsystem disabling
- addition of gstconfig.h.in so we can track the disablings
- <gst/gst.h> does not include <unistd.h> and <config.h> anymore
- documentation updated for gstinfo stuff (build the docs yourself to know what changed)
- bugfixes for making of the docs (files from CVS are not deleted anymore
- testsuite for debugging changes in testsuite/debug
expect breakage
