Use g_object_new() instead which nowadays has a shortcut for the
no-properties check. It still does an extra GType check in the
function guard, but there's a pending patch to remove that
and it's hardly going to be a performance issue in practice,
even less so on a system that's compiled without run-time checks.
Alternative would be to move to the new g_object_new_properties()
with a fallback define for older glib versions, but it makes the
code look more unwieldy and doesn't seem worth it.
Fixes deprecation warnings when building against newer GLib versions.
https://bugzilla.gnome.org/show_bug.cgi?id=780903
If parsing returns a non-OK flow return in the middle
of processing an input buffer, don't overwrite that
if a later return is OK again - the subclass might
return not-linked in the middle, and then discard
subsequent data without pushing while returning OK.
A later success doesn't invalidate the earlier failure,
but we should continue processing after not-linked, so
as to keep parse state consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=779831
We would add the offset a second time in _scan_for_start_code()
when we found a result, but it's already been added to the data
pointer at the beginning of _masked_scan_uint32_peek(), so the
peeked value would be wrong if the initial offset was >0, and
we would potentially read memory out-of-bounds.
Add unit test for all of this.
https://bugzilla.gnome.org/show_bug.cgi?id=778365
Otherwise when seeking/looping to the start when reaching the end,
the sink waits for the duration of the stream. So the user hears
nothing for the duration of the stream before it actually loop again.
See example attached to the bug for that.
Existing test:
gst-plugins-good/tests/icles/test-segment-seeks foo.flac
Without the patch the user hears a crack/cut at each seek.
https://bugzilla.gnome.org/show_bug.cgi?id=777780
This was totally non-obvious, the kind of big problem is that subclasses must
be able to unblock their streaming thread and continue exactly where they left off
on unpause!
https://bugzilla.gnome.org/show_bug.cgi?id=773912
It might've failed just because of flushing or other things, and we
should retry again on the next possibility if something ever calls in
here again.
https://bugzilla.gnome.org/show_bug.cgi?id=774623
Check the correct segment format value.
parse->segment.format is the format we're outputting in,
not the upstream format. Use parse->priv->upstream_format instead,
and make sure it's set in pull mode.
If the parser is not parsing a raw elementary stream, restrict
the position, duration and conversion query replies to
things we can sensibly answer about - especially don't do
random conversions to/from bytes.
This is cosmetic as 'late' should never be set during preroll (in pause).
Though code may evolve in the future, so this is good for preventing
potential bugs.
https://bugzilla.gnome.org/show_bug.cgi?id=772468
When the first buffer arrives, we endup calling:
->prepare()
->prepare()
->preroll()
->render()
This will likely confuse any element using this method. With this patch,
we ensure the preroll take place before the first render prepare() is
called. This will result in:
->prepare()
->preroll()
->prepare()
->render()
https://bugzilla.gnome.org/show_bug.cgi?id=772468
This reverts commit 2e278aeb71.
Some parsers, specifically audio parsers, assume to get all remaining
data on EOS and just pass them onwards. While the idea here is correct,
we will probably need a property for this on baseparse for parsers to
opt-in.
https://bugzilla.gnome.org/show_bug.cgi?id=773666
Implement handling in basesink to not unconditionally discard
out-of-segment buffers and expose it as a new property on fakesink
(not unconditionally in all basesink based sinks).
The property defaults to FALSE.
https://bugzilla.gnome.org/show_bug.cgi?id=765734
baseparse would pass whatever is left in the adapter to the
subclass when draining, even if it's less than the minimum
frame size required. This is bogus, baseparse should just
discard that data then. The original intention of that code
seems to have been that if we have more data available than
the minimum required we should pass all of the data available
and not just the minimum required, which does make sense, so
we'll continue to do that in the case that more data is available.
Fixes assertions in rawvideoparse on EOS after not-negotiated with
fakesrc sizetype=random ! queue ! rawvideoparse format=rgb ! appsink caps=video/x-raw,format=I420
https://bugzilla.gnome.org/show_bug.cgi?id=773666
The durations of the buffers are (usually) assuming that no frames are being
dropped and are just the durations coming from the stream. However if we do
trickmodes, frames are being dropped regularly especially if only key units
are supposed to be played.
Fixes completely bogus QoS proportion values in the above case.
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
If segment.stop was given, and the subclass provides a size that might be
smaller than segment.stop and also smaller than the actual size, we would
already stop there.
Instead try reading up to segment.stop, the goal is to ignore the (possibly
inaccurate) size the subclass gives and finish until segment.stop or when the
subclass tells us to stop.
Waiting before posting calculated bitrates seems to be the
intent of the code, so avoid adding them to the tag list
pushed with the first frame.
When the threshold is reached, gst_base_parse_update_bitrates
sets tags_changed, so this posts the calculated ones right
that moment.
This prevents an insane average calculated from just the
first (key) frame from getting posted.
https://bugzilla.gnome.org/show_bug.cgi?id=768439
There must be a SEGMENT event before the GAP event, and SEGMENT events must
come after any CAPS event. We however did not produce any CAPS yet, so we need
to ensure to insert the CAPS event before the SEGMENT event into the pending
events list.
https://bugzilla.gnome.org/show_bug.cgi?id=766970
If we were in PAUSED, the current clock time and base time don't have much to
do with the running time anymore as the clock might have advanced while we
were PAUSED. The system clock does that for example, audio clocks often don't.
Updating the start time in PAUSED will cause a) the wrong position to be
reported, b) step events to step not just the requested amount but the amount
of time we spent in PAUSED. The start time should only ever be updated when
going from PLAYING to PAUSED to remember the current running time (to be able
to compensate later when going to PLAYING for the clock time advancing while
PAUSED), not when we are already in PAUSED.
Based on a patch by Kishore Arepalli <kishore.arepalli@gmail.com>
The updating of the start time when the state is lost was added in commit
ba943a82c0 to fix the position reporting when
the state is lost. This still works correctly after this change.
https://bugzilla.gnome.org/show_bug.cgi?id=739289
We don't do calculations with different units (buffer offsets and bytes)
anymore but have functions for:
1) getting the number of bytes since the last discont
2) getting the offset (and pts/dts) at the last discont
and the previously added function to get the last offset and its distance from
the current adapter position.
https://bugzilla.gnome.org/show_bug.cgi?id=766647
API: gst_buffer_prev_offset
API: gst_buffer_get_offset_from_discont
The gst_buffer_get_offset_from_discont() method allows retrieving the current
offset based on the GST_BUFFER_OFFSET of the buffers that were pushed in.
The offset will be set initially by the GST_BUFFER_OFFSET of
DISCONT buffers, and then incremented by the sizes of the following
buffers.
The gst_buffer_prev_offset() method allows retrievent the previous
GST_BUFFER_OFFSET regardless of flags. It works in the same way as
the other gst_buffer_prev_*() methods.
https://bugzilla.gnome.org/show_bug.cgi?id=766647
The subclass should do that already, but just in case do it ourselves too as a
fallback. Without this, e.g. playbin will just wait forever if this fails
because it is triggered as part of an ASYNC state change.
Otherwise PTS and DTS will come out of sync if upstream continues to provide
PTS and not DTS, and we have to skip some data from the stream or PTS are not
exactly increasing with the duration of each packet.
https://bugzilla.gnome.org/show_bug.cgi?id=765260
gsttypefindhelper.c:485: Warning: GstBase: invalid "transfer" annotation for gsize: only valid for array, struct, union, boxed, object and interface types
