Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* ext/mad/gstmad.c: (gst_mad_chain):
Don't call mad_stream_sync() directly after recovering sync.
Fixes#151661.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_check_caps_reset), (gst_mad_chain):
Decoding the header first fixes some problems in resyncing
in more mp3s.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_check_caps_reset),
(gst_mad_change_state):
Allow for mp3 rate/channels changes. However, only very
conservatively. Reason that we *have* to enable this is smiply
because the mad find_sync() function is not good enough, it will
regularly sync on random data as valid frames and therefore make
us provide random caps as *final* caps of the stream. The best fix
I could think of is to simply require several of the same stream
changes in a row before we change caps.
The actual testcase that works now is #
* ext/ogg/Makefile.am:
* ext/ogg/gstogg.c: (plugin_init):
* ext/ogg/gstogmparse.c:
OGM support (video only for now; I need an audio sample file).
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_base_init),
(gst_asf_demux_process_stream), (gst_asf_demux_video_caps),
(gst_asf_demux_add_video_stream):
WMV extradata.
* gst/playback/gstplaybasebin.c: (unknown_type):
Don't error out on single unknown-types after all. It's wrong.
If we found type of video and audio but not of a subtitle stream,
it will still error out (which is unwanted). Will find a better fix
later on.
* gst/typefind/gsttypefindfunctions.c: (ogmvideo_type_find),
(ogmaudio_type_find), (plugin_init):
OGM support.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_samples_to_timestamp):
cast to GstClockTime to get higher granularity
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event):
use gst_element_set_time_delay to get the exact time
* ext/mad/gstmad.c: (gst_mad_chain):
use the negotiated rate instead of the current frame's rate which
might be wrong because of bit errors. This avoids emitting totally
bogus timestamps and screwing sync.
(fixes#143454)
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_handle_event):
Fix for when the first format in a discont event is not a
byte-based one. Should fix#137710.
Original commit message from CVS:
2004-03-06 Christophe Fergeau <teuf@gnome.org>
* ext/mad/gstmad.c: (gst_mad_chain): send the average bitrate read
from the xing header
Original commit message from CVS:
2004-03-06 Christophe Fergeau <teuf@gnome.org>
For some reason, I only committed a ChangeLog entry yesterday and
not the corresponding code...
* ext/mad/gstmad.c: Fix detection of Xing headers
* gst/tags/gstid3tag.c: Changes to support TLEN tags
Original commit message from CVS:
2004-03-06 Christophe Fergeau <teuf@gnome.org>
* ext/mad/gstid3tag.c: (gst_mad_id3_to_tag_list):
* ext/mad/gstmad.c: (gst_mad_init), (is_xhead),
(mpg123_parse_xing_header), (gst_mad_chain): parse Xing header in vbr
files, and report the parsed length as a GST_TAG_DURATION tag.
* gst/tags/gstid3tag.c: support TLEN (duration) tag
Original commit message from CVS:
2004-02-20 Andy Wingo <wingo@pobox.com>
* gst/intfloat/, gst/oneton: Removed, replaced by audioconvert and
interleave respectively.
* gst/interleave/deinterleave.c: New plugin: deinterleave
(replaces on oneton).
* gst/interleave/interleave.c: New plugin: interleave.
* gst/interleave/plugin.h: Support file.
* gst/interleave/plugin.c: Support file.
* configure.ac: Remove intfloat and oneton, add interleave.
* ext/sndfile/gstsf.c: Handle events better.
* gst/audioconvert/gstaudioconvert.c: Change to support int2float
and float2int operation. int2float has scheduling problems as
noted in in2float_chain.
Original commit message from CVS:
rework id3tag plugin to work as
a) parser - just strip id3 tags
b) tag reader - extract tags and go EOS
c) tag writer - change id3 tags
Included is some revamping to ease code to make it possible to strip id3tag from its mad dependency (without ID3v2 support), which would still make the parsing bits work. This is however not done yet.
This plugin supercedes the id3types plugin.
Original commit message from CVS:
tagging stuff and build fixes. In detail:
- make gdk-pixbuf loader work when distchecking
- fix invalid syntax in ffmpeg Makefile. wildcards for EXTRA_DIST are not allowed. This broke builds where distdir != srcdir
- fix ffmpeg cvs grabbing when srcdir != distdir
- new id3tag plugin for id3 tag reading/writing (uses mad's libid3tag)
- mad and libid3tag require mad/libid3tag v0.15. Fixed configure to require that
- added ogg demuxer in ext/ogg. The demuxer does not handle events yet. Especially getting seeking right will require some effort or code copying from libvorbis.
- added raw vorbis detection to typefinding. oggdemux requires a typefind function to detect its contents.
- tags plugin in gst/tags. Provides API in <gst/tags/gsttagediting.h>. API includes tag matching GStreamer <=> ID3 and GStreamer <=> vorbis and writing/reading vorbiscomments or ID3v1 tags. Also included is a simple vorbiscomment reader/writer. Writing will not really work though until someone writes oggmux.
- various build fixes. Mostly missing (DIST)CLEANFILES.
- vorbisenc handles tag writing.
Now it's YOUR turn to fix and write more plugins that handle writing/reading of tags. :)
Original commit message from CVS:
first bunch of conversions to new plugin_init. Includes libs/gst, gst/id3, sys/oss, ext/gnomevfs, gst/typefind and ext/mad.
You guessed it, everything Rhythmbox needs ;)
fixed BMP typefind and made gnomevfs one plugin instead of two while doing this
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- all typefind functions are in gst/typefind now
- more typefind functions then before
- some plugins might fail to compile now because I don't have them installed and they
a) require bytestream or
b) haven't had their typefind fixed.
Please fix those plugins and put the typefind functions into gst/typefind if they don't have dependencies
Original commit message from CVS:
New typefind system:
* bytestream is now part of the core
* all plugins have been modified to use this new typefind system
* asf typefinding added
* mpeg video stream typefiding removed because it's broken
* duplicate typefind entries removed
* extra id3 typefinding added, because we've seen 4 types of files
(riff/wav, flac, vorbis, mp3) with id3 headers and each of these needs
to work. Instead, I've added an id3 element and let it redo typefiding
after the id3 header. this needs a hack because spider only typefinds
once. We can remove this hack once spider supports multiple typefinds.
* with all this, mp3 typefinding is semi-rewritten
* id3 typefinding in flac/vorbis is removed, it's no longer needed
* fixed spider and gst-typefind to use this, too.
* Other general cleanups
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
