Instead of reusing a parameter variable for the return value of
gst_vaapipostproc_fixate_caps(), this patch uses the function scoped
pointer. Thus, the code is cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=785706
When glimagesink negotiates the caps feature memory:DMABuf the
exported dmabufs buffers with NV12 format are not well rendered, thus
setting only planar.
https://bugzilla.gnome.org/show_bug.cgi?id=788229
Instead of using gst_vaapi_display_set_property() or
gst_vaapi_display_get_property(), this patch set replace it usage
with g_object_set() or g_object_get().
Also the internal helper cb_set_value() is removed since it is not
used anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=788058
Make sure vaapisink create a va surface backed buffer pool and all
required attributes get assigned correctly for drm display type.
This is needed to make the below pipeline working:
gst-launch-1.0 filesrc location= raw_video.mov ! videoparse format=uyvy
width=320 height=240 framerate=30/1 ! vaapisink display=drm
https://bugzilla.gnome.org/show_bug.cgi?id=786954
A new FEI based encoder element for h264 is added: vaapih264feienc
FEI is a an extension to VA-API which is providing low level
advanced control over different stages of encoding.
Extending vaapih264enc with fei support is possible, but it will
make the code too much complicated and will be difficult
to debug. So adding the new encoder element, but keeping
the rank as 0 , vaapih264enc will stay as the primary
encoder for normal use cases.
The vaaih264feienc is mainly useful for customers who want to play
with MotionVectors and Macroblock Predictions. Also user can
do one stage of encoding(eg: only the Motion Vector Calculation)
in software and offload trasformation/entroy-coding etc to
Hardware (which is what PAK module is doing) using FEI element.
vaapih264feienc can work in different modes using fei-mode properoty
eg: gst-launch-1.0 videotestsrc ! vaapih264feienc fei-mode=ENC+PAK ! filesink location=sample.264
Important Note: ENC only mode won't produce any encoded data which is expected.
But ENC alwys requires the output of PAK in order to do the inter-prediction
over reconstructed frames.
Similary PAK mode alway requires MV and MBCode as input, so unless there is an
upstream element providing those buffers, PAK only won't work as expected.
In a nutshell, ENC_PAK and the ENC+PAK modes are the only options we can verify
with vaapih264feienc. But ideally, EN+PAK mode verification is enough to make sure
that ENC and PAK are working as expected since ENC+PAK mode always invoke ENC and PAK
separately in vaapih264feienc.
People contributed:
Wang, Yi <yi.a.wang@intel.com>
Leilei <leilei.shang@intel.com>
Zhong, Xiaoxia <xiaoxia.zhong@intel.com>
xiaominc <xiaomin.chen@intel.com>
Li, Jing B <jing.b.li@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785712https://bugzilla.gnome.org/show_bug.cgi?id=784667
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
When vaapih264dec's base-only profile is set to TRUE, fake SVC profile
support in caps.
https://bugzilla.gnome.org/show_bug.cgi?id=732266
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Instead including particular gstgl header files in a header file
that doesn't export a gstgl symbol, the main gstgl header file is
included in gstvaapipluginutil.c where the symbols are used.
https://bugzilla.gnome.org/show_bug.cgi?id=786597
Coverity scan bug:
An unsigned value can never be negative, so this test will always
evaluate the same way.
As len is guint32, there is no need to check it if it is equal or
bigger than zero.
Coverity scan bug:
The variable will contain an arbitrary value left from earlier
computations.
Variable base_only is fetched from base-only property, and it may be
not assigned. It needs to be initialized.
Refactor gst_vaapi_plugin_base_create_gl_context() in order to check
the return value of gst_gl_ensure_element_data(). The result is a code
bit cleaner.
The function g_bit_nth_lsf() may return -1 if the request bit position
is not avaible. Thus, this patch check if the return value is not -1
in order to continue.
Replacing GstVaapiDisplay during rendering might be hiding problems
at some cases, even though it's safe currently since we use cache
of GstVaapidisplay.
Play safe by failing if this happens.
https://bugzilla.gnome.org/show_bug.cgi?id=766704
Through "gst.vaapi.app.Display" context, users can set their own VADisplay
and native display of their backend.
Attributes:
- display : pointer of VADisplay
- x11-display : pointer of X11 display (Display *), if they're using.
This patch creates GstVaapidisplayX11 if information provided through
"gst.vaapi.app.Display"
https://bugzilla.gnome.org/show_bug.cgi?id=766704
So far vaapi encoder does not set profile to src caps. This patch makes it
setting profile to src caps, which is determined by itself.
In addition, if encoder chose different profile, which is not negotiated with
downstream, we should set compatible profile to make negotiation working.
https://bugzilla.gnome.org/show_bug.cgi?id=757941
Check if the requested profile in source caps, is supported by the
VA driver. If it is not, an info log message is send saying that
another (compatible?) profile will be used.
https://bugzilla.gnome.org/show_bug.cgi?id=757941
First check if downstream requests ANY caps. If so, byte-stream is
used and the profile will be choose by the encoder. If dowstream
requests EMPTY caps, the negotiation will fail.
Lately, byte-stream and profile are looked in the allowed caps.
https://bugzilla.gnome.org/show_bug.cgi?id=757941
The check for avc stream format was done in the vaapi encoder's
vmethod get_caps(), but that is wrong since it has to be check
when encoder set_format().
https://bugzilla.gnome.org/show_bug.cgi?id=757941
vaapipostproc didn't negotiate the proper multiview caps losing
downstream information.
This patch enables the playing of MVC encoded stream by setting
the proper multiview mode/flags and views to src caps, according
to sink caps.
https://bugzilla.gnome.org/show_bug.cgi?id=784320
There is another regression with 7a206923 when setting the video
info for the video meta, it should be the one from the image's
allocator rather from the allocation caps.
Test pipeline:
gst-launch-1.0 filesrc location=bug766184.flv ! decodebin \
! tee ! videoconvert ! videoscale \
! video/x-raw, width=1920, height=1080 ! xvimagesink
There is a regression in 7a206923, since the buffer pool ditches all
the buffers generated by them because the pool config size is
different of the buffer's size.
Test pipeline:
gst-launch-1.0 filesrc location=big_buck_bunny_1080p_h264.mov \
! qtdemux ! vaapih264dec ! vaapipostproc ! xvimagesink \
--gst-debug=GST_PERFORMANCE:5
The allocator may update the buffer size according to the VA surface
properties. In order to do this, the video info is modified when the
allocator is created, which reports through the allocation info the
updated size, and set it to the pool config.
Refactor the set_config() virtual method considering a cleaner
approach to allocator instanciation, if it it not set or if it is
not valid for the pool.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
The vaapi video decoders might have different allocation caps from
the negotiation caps, thus the GstVideoMeta shall use the negotiation
caps, not the allocation caps.
This was done before reusing gst_allocator_get_vaapi_video_info(),
storing there the negotiation caps if they differ from the allocation
ones, but this strategy felt short when the allocator had to be reset
in the vaapi buffer pool, since we need both.
This patch adds gst_allocator_set_vaapi_negotiated_video_info() and
gst_allocator_get_vaapi_negotiated_video_info() to store the
negotiated video info in the allocator, and distinguish it from
the allocation video info.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
Renamed local video info structure names in set_config() vitual
method. The purpose of their renaming is to clarify the origin
of those structures, whether come from passed caps parameter
(new_allocation_vinfo) or from the configured allocator
(allocator_vinfo).
https://bugzilla.gnome.org/show_bug.cgi?id=783599
Renamed private GstVideoInfo structure video_info to allocation_vinfo
and alloc_info to negotiated_vinfo.
The purpose of these renaming is to clarify the origin and purpose of
these private variables:
video_info (now allocation_vinfo) comes from the bufferpool
configuration. It describes the physical video resolution to be
allocated by the allocator, which may be different from the
negotiated one.
alloc_info (now vmeta_vinfo) comes from the negotiated caps in
the pipeline. It represents how the frame is going to be mapped
using the video meta.
In Intel's VA-API backend, the allocation_vinfo resolution is
bigger than the negotiated_info.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
When state of vaapisink is changed from PLAYING to NULL, the handle_events
flag is set to FALSE, and never recovered, and then event thread is never
going to run.
So we should allow to set the flag only when users try it.
https://bugzilla.gnome.org/show_bug.cgi?id=782543
Handles new custom event GstVaapiEncoderRegionOfInterest
to enable/disable a ROI region.
Writes a way to use new event to document.
https://bugzilla.gnome.org/show_bug.cgi?id=768248
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
This bin should have similar classification as decodebin which is
"Generic/Bin/Decoder" otherwise it will appear wrongly as video
decoder.
Signed-off-by: Victor Toso <victortoso@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=782063
When downstream negotiates a pixel-aspect-ratio of 0/1, the
calculations for resizing and formatting in vaapipostproc and
vaapisink, respectively, failed, and thus the pipeline.
This patch handles this situation by converting p-a-r of 0/1 to
1/1. This is how other sinks, such as glimagesink, work.
https://bugzilla.gnome.org/show_bug.cgi?id=781759
Since it's created by itself, it should be unref-counted
after gst_buffer_pool_config_set_allocator call. Afterwards,
this allocator will be ref-counted again when assigning to priv->allocator.
https://bugzilla.gnome.org/show_bug.cgi?id=781577
Sometimes a video decoder could set different buffer pool
configurations, because their frame size changes. In this case we
did not reconfigure the allocator.
This patch enables this use case, creating a new allocator inside
the VAAPI buffer pool if the caps changed, if it is not dmabuf-based.
If so, it is just reconfigured, since it doesn't have a surface pool.
https://bugzilla.gnome.org/show_bug.cgi?id=781577
Direct rendering (use vaDeriveImage rather than vaPutImage) has better
performance in some Intel platforms (Haswell, for example) but in others
(Skylake) is the opposite.
In order to have some control, the patch enables the direct rendering
through the environment variable GST_VAAPI_ENABLE_DIRECT_RENDERING.
Also it seems to generating some problems with gallium/radeon backend.
See bug #779642.
https://bugzilla.gnome.org/show_bug.cgi?id=775848
Clear decoders out on a flush but keep the same instance,
rather than completely recreating them. That avoids
unecessarily freeing and recreating surface pools
and contexts, which can be quite expensive
https://bugzilla.gnome.org/show_bug.cgi?id=781142
When these definitions are false, they are undef in the
preprocessor, not a defined value of 0. When they are unset the
compile fails with:
'GST_GL_HAVE_WINDOW_WAYLAND' undeclared (first use in this function)
https://bugzilla.gnome.org/show_bug.cgi?id=780948
This new virtual method, get_profile(), if implemented by specific
encoders, will return the VA profile potentially determined by the
source caps.
Also it is implemented by h264 and h265 encoders, which are the main
users of this vmethod.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
In order to get the supported surface formats within a specific
profile this patch adds the GstVaapiProfile as property to
gst_vaapi_encoder_get_surface_formats().
Currently the extracted formats are only those related with the
default profile of the element's codec.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
As in gstreamer-vaapi a common base class is used, the specific
default category is passed to the base-plugin initializator, thus
the log messages are categorized with the used plugin.
Nonetheless, when the gst-debug is disabled in compilation time,
it is needed to pass NULL to the base-plugin initializator. This
patch does that.
https://bugzilla.gnome.org/show_bug.cgi?id=780302
Particularly in GNOME Wayland, the negotiated or created GL context
defines a GLX environment, but VAAPI fails to create a GLX VA
display because there is no a DRI2 connection.
This patch retries to create the VA display if VA cannot create one
with the GL context parameters. Now using the old list of display
types.
This should also work in the case of systems with two GPU, when the
non-VAAPI has the graphics environment, and the VAAPI-enabled one
shall work headless.
https://bugzilla.gnome.org/show_bug.cgi?id=772838
Removes GstVideoGLTextureUploadMeta caps feature if the driver
doesn't support opengl.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=772838
Rename to be consistent with H.264 and also H.265 encoder. The
meson build assumed this was already consistently named, and so
previously was not able to actually build the H.265 decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=778576
When dmabuf is negotiated downstream and decoding and rendering are
not done on the same device, the layout has to be linear in order for
the memory to be shared accross devices, since each device has its
own way to do tiling.
Right now this code is rather just a to-do comment, since we are not
fetching the device ids.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
Use new -base API gst_video_decoder_allocate_output_frame_full() to
pass the current proxy/surface to the pool.
The pool will will export thins given surface instead of exporting a
brand new surface that will never be filled in with meaningfull data.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
Overriding the vmethod acquire_buffer() it is possible to attach the
right GstMemory to the current acquired buffer.
As a matter of fact, this acquired buffer may contain any instantiated
GstFdmemory, since this buffer have been popped out from the buffer
pool, which is a FIFO queue. So there is no garantee that this buffer
matches with the current processed surface. Evenmore, the VA driver
might not use a FIFO queue. Therefore, it is no way to guess on the
ordering.
In short, acquire_buffer on the VA driver and on the buffer pool return
none matching data, we have to manually attach the right GstFdMemory to
the acquired GstBuffer. The right GstMemory is the one associated with
the current surface.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
gst_vaapi_dmabuf_memory_new() always exports a surface. Previously, it
had to create that surface. Now it can also export an already provided
surface. It is useful to export decoder's surfaces (from VA context).
https://bugzilla.gnome.org/show_bug.cgi?id=755072
Do not add the meta:GstVideoGLTextureUploadMeta feature if the render
element can handle dmabuf-based buffers, avoiding its negotiation.
Similar as "vaapidecode: do not add meta:GstVideoGLTextureUploadMeta
feature if can dmabuf"
https://bugzilla.gnome.org/show_bug.cgi?id=755072
If the negotiated caps are raw caps and downstream supports the
EGL_EXT_image_dma_buf_import extension, then the created allocator
is the DMAbuf, configured to downstream.
At this moment, the only element which can push dmabuf-based buffers
to downstream, is vaapipostproc.
In order to enable, in the future, dmabuf-based buffers, the vaapi base
plugin needs to check if downstream can import dmabuf buffers.
This patch checks if downstream can handle dmabuf, by introspecting the
shared GL context. If the GL context is EGL/GLES2 and have the extension
EGL_EXT_image_dma_buf_import, then dmabuf can be negotiated.
Original-patch-by: Julien Isorce <j.isorce@samsung.com>
The surface created for downstream is going to be filled by VAAPI
elements. So, the driver needs write access on that surface.
This patch releases the derived image held by the proxy, thus the
surface is unmarked as busy.
This is how it has to be done as discussed on libva mailing list.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
Add GstPadDirection param to gst_vaapi_dmabuf_allocator_new(), thus
we later could do different thing when the allocated memory is for
upstream or dowstream, as required by VA-API.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
A value of width/height property should be set to out caps,
if negotiation had been going properly.
So we can use srcpad_info when making decision of scaling.
https://bugzilla.gnome.org/show_bug.cgi?id=778010
If a GstVaapiDisplay is not found in the GStreamer context sharing,
then VAAPI elements look for a local GstGLContext in gst context
sharing mechanism ('gst.gl.local.context').
If this GstGLContext not found either then, only the VAAPI decoders
and the VAAPI post-processor, will try to instantiate a new
GstGLContext.
If a valid GstGLContext is received, then a new GstVaapiDisplay will
be instantiated with the platform, API and windowing specified by the
instantiated GstGLContext.
Original-Patch-By: Matt Fischer <matt.fischer@garmin.com>
https://bugzilla.gnome.org/show_bug.cgi?id=777409
Instead of calling g_return_val_if_fail() to check the context type, we
should use a normal conditional, since it is possible that other context types
can arrive and try to be assigned. Otherwise a critical log message is
printed.
This happens when we use playbin3 with vaapipostproc as video-filter.
https://bugzilla.gnome.org/show_bug.cgi?id=777409
Every time a new buffer is allocated, the pool is activated. This
doesn't impact in performance since gst_buffer_pool_set_active()
checks the current state of the pool. Nonetheless it logs out a
message if the state is the same, and it floods the logging subsystem
if it is enabled.
To avoid this log flooding first the pool state is checked before
changing it.
When a new sink caps arrive the internal decoder state is updated
and, if it is, request a downstream renegotiation.
Previously, when new caps arrived the whole decoder where destroyed
and recreated. Now, if the caps are compatible or has the same codec,
the internal decoder is kept, but a downstream renegotiation is
requested.
https://bugzilla.gnome.org/show_bug.cgi?id=776979
Adds two buffers as the default value of minimum buffer.
This would be used when creating and proposing vaapi bufferpool for
sink pad, hence the upstream element will keep, at least, these two
buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=775203
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Rename the parameters 'vip' and 'flags' to 'alloc_info' and
'surface_alloc_flags' respectively. The purpose of this change is
to auto-document those parameters.
Also, aligned to this patch, the local 'alloc_info' variable was
renamed as 'surface_info', because it stores the possible surface's
video info, not the allocate one.
In order to auto-document the code, this patch renames the 'vip'
parameter in the functions related to gst_vaapi_video_allocator_new ()
to 'alloc_info', since it declares the allocation video info from
the vaapi buffer pool.
gst_vaapi_surface_new_with_format() is a wrapper for
gst_vaapi_surface_new_full (). In this case, the former is simpler
than the first. This patch changes that.
If src pad caps have changed, it needs to notify it downstream. In
addition, do not set passthrough if they have changed.
Otherwise, transform sometimes starts processing before caps change.
The passthrough value will be set in fixate later in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=775204
Add a capsfilter forcing the caps
"video/x-raw(memory:VASurface), format=(string)NV12" between the
queue and the vaapipostproc so no renegotiation is required.
https://bugzilla.gnome.org/show_bug.cgi?id=776175
To detect and handle errors during allocator_configure_surface_info()
and allocator_conigure_image_info().
https://bugzilla.gnome.org/show_bug.cgi?id=776084
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
When an instance of GstVaapiVideoAllocator fails at initializing, the
log message should not include the allocator's object, because it is
going to be unrefed.
This reverts commit 3285121181.
videodecode's negotiate() vmethod is also called when events arrive,
but this would mean that the proper configuration of sink pad might
not be complete, thus we should not update the src pad.
Let's keep the old non-vmethod negotitate().
Added the inlined function allocator_configure_pools() moving out code
from gst_vaapi_video_allocator_new() to make clear that it is a
post-initalization of the object.
Since video_info stores the GstVideoInfo of the allocation caps,
it is clear if we rename it as allocation_info, to distinguish it
later from negotiation_info.
Instead of defining GstVaapiDmaBufAllocator as a hackish decorator of
GstDmaBufAllocator, now, since the expose of the GstDmaBufAllocator's
GType, GstVaapiDmaBufAllocator is a full feature GstAllocator inherited
from GstDmaBufAllocator.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Add a helper function to initialize the gst_debug_vaapivideomemory,
to use it either by the GstVaapiVideoAllocatorClass or
GstVaapiDmabufAllocator (which is a decorator of GstDmaBufAllocator).
Later, log possible errors when calling gst_vaapi_dmabuf_allocator_new ()
https://bugzilla.gnome.org/show_bug.cgi?id=755072
As the internal encoder is created at start(), let's release it at
stop() vmethod, to be consistent.
gst_vaapiencode_destroy() is called since it also resets the input and
output states, which is something that the base class does internally
after calling stop() vmethod.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Currently, specific encoder is created during set_format(). This might
lead to race condition when creating profiles with multiple encoders.
This patch moves ensure_encoder() call to start() vmethod to ensure
avoiding the race condition.
https://bugzilla.gnome.org/show_bug.cgi?id=773546
In commit ca0c3fd6 we remove the dynamic configuration if the bin
because we assumed that the bin will be always static as it is
registered.
Nonetheless we were wrong, because it is possible to request, with a
property, to avoid the use of the post-processor.
Since we want to add a way to disable the post-processor through
environment variables, this remove feature is required again.
If the environment variable GST_VAAPI_DISABLE_VPP is defined the
postprocessor inside of the vaapidecodebin is disabled, then
vaapidecodebin is an alias of the old vaapidecode.
https://bugzilla.gnome.org/show_bug.cgi?id=775041
Instead of creating the VA display before setting the bus to the
element, it is created when the element is opened.
Basically, this commit is a revert of
5e5d62cac7
That was done when the GStreamer's context sharing was not mature
enough as now. There is no reason to keep this hack.
Since the differentiation of negotiation caps and allocation caps,
there is no need to add a video crop meta with the negotiation caps.
Hence, removing it.
https://bugzilla.gnome.org/show_bug.cgi?id=773948
Since all the video converter were deprecated in gstreamer-1.2, we don't need
to handle them anymore in the vaapi's buffer meta.
This patch removes its usage and the buffer meta's API for that.
https://bugzilla.gnome.org/show_bug.cgi?id=745728
First, deactivate source pad pool when the out caps change, and if so,
destroy texture map, the source pad allocator and pool only if the
new caps are different from the ones already set.
This is related with bug 758907 when no vaapipostproc is used (no
vaapidecodebin). In order to negotiate downstream we need to destroy
the source pad allocator, otherwise the same allocated buffers are
used, failing the mapping.
Remove redundant GST_VAAPI_TYPE_VIDEO_INFO, since it is a duplicate of
GST_TYPE_VIDEO_INFO created before gstreamer 1.6, where the boxed type
was created.
https://bugzilla.gnome.org/show_bug.cgi?id=774782
This patch adds the created allocator to the allocation query either
in decide_allocation() and propose_allocation() vmehtods.
With it, there's no need to set the modified allocator's size in the
pool configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=774782
We should set the correct buffer size when we are configuring the pool,
otherwise the buffer will be discarded when it returns to the pool.
Indeed when the ref-count of a buffer reaches zero, its pool will queue
it back (and ref it) if, and only if, the buffer size matches the
configured buffer size on the pool.
This issue can be debugged with GST_DEBUG=*PERF*:6, see gstbufferpool.c
https://bugzilla.gnome.org/show_bug.cgi?id=774782
When calling gst_vaapi_video_memory_copy() the allocator of the memory
to copy should be allocated by the vaapi allocator.
This patch does this verification.
Instead of having a gst_vaapi_video_memory_free() that is only going to
be called by gst_vaapi_video_allocator_free(), let's just remove the first
and merged into the second.
There were duplicated code in gst_video_meta_unmap_vaapi_memory() and
gst_vaapi_video_memory_unmap() when unmapping.
This patch refactors both methods adding the common function
unmap_vaapi_memory(). This also ensures, if direct rendering is enabled, it
is correctly reset.
Additionally, only when mapping flag has the WRITE bit, it set the image as
current, which was done in gst_video_meta_map_vaapi_memory() but no in
gst_vaapi_video_memory_map().
In order to make this, the mapping flags were required, so instead of
overloading mem_unmap() virtual function, mem_unmap_full() is overloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=774213
There were duplicated code in gst_video_meta_map_vaapi_memory() and
gst_vaapi_video_memory_map() when doing the READ and WRITE mapping.
This patch refactors both methods adding the common function
map_vaapi_memory().
Additionally, only when flag has the READ bit it calls
ensure_images_is_current(), which was done in
gst_video_meta_map_vaapi_memory() but no in
gst_vaapi_video_memory_map().
https://bugzilla.gnome.org/show_bug.cgi?id=772151
The variable member allowed_sinkpad_caps is constructed querying the
current VA display. Bearing that in mind, the variable shall be freed
when the VA display changes or is removed.
This patch moves the freeing of allowed_sinkpad_caps to close(), when
the VA display is freed.
The thread that handles window's events should be finished during
pipeline's shutdown, otherwise it will remain alive during pipeline
re-activation, leading to unexpected problems.
This patch fixes failures of intensive_state_change scenario of
gst-validate
https://bugzilla.gnome.org/show_bug.cgi?id=774241
Returning GST_FLOW_ERROR always when gst_pad_push fails might lead to
deadlock during seek.
This patch returns the same error of gst_pad_push() and log out the
return value.
https://bugzilla.gnome.org/show_bug.cgi?id=774030
In commit 6d11a00 were introduced a regression when gstreamer-vaapi is
compiled with out EGL/GLX support: it shall not support
GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS.
This patch guards the inclusion of GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS in the
allowed src caps for vaapedecode if EGL/GLX.
Previously the frame map counter increased independently if the map succeeded
or not. This leaded to critical messages and crashes if the frame was unable
to be mapped, but the counter increased.
This patch increases the map counter only if the map operation occurred.
https://bugzilla.gnome.org/show_bug.cgi?id=773939
When the allocator is created, it stores the allocation caps. But sometimes
the "allocation caps" may be different from the "negotiation caps".
In this case, the allocator should store the negotiation caps since they
are the ones used for frame mapping with GstVideoMeta.
When vaapispostproc is used, this is not a problem since the element is assume
to resize. But when using a vaapi decoder only, with a software renderer, it
fails in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=773323
Just as vaapipostproc, VA decoder's context can be queried to get the possible
raw formats, so, the src caps can negotiate the exact caps that the context
supports.
Since when the sink pad allocator is created, it is decided if the required
one is vaapi allocator or dmabuf allocator, there is no need to force its set
again.
When running gst-discoverer-1.0, in certain media, vaapipostroc is stopped
meanwhile it is transforming caps. The problem is that stop() calls
gst_vaapi_plugin_base_close(), which nullifies the element's va display, but
the va display is used in tranform_caps() when it is extracting the possible
format conversions. This display disappearing generates warning messages.
This patch holds a local reference of va display at ensure_allowed_raw_caps()
hence it doesn't go away meanwhile it is used, even if the
gst_vaapi_plugin_base_close() is called in other thread.
https://bugzilla.gnome.org/show_bug.cgi?id=773593
Enable the direct rendering with linear surfaces if the negotiated src caps
are video/x-raw without features.
Pass also the caps, since they are needed to know the requested caps features.
Just as we did in ensure_sinkpad_allocator(), let's move the error message
into the ensure_srcpad_allocator() from the caller,
gst_vaapi_plugin_base_decide_allocation()
Instead of receiving the GstVideoInfo structure as parameter, get the original
GstCaps from ensure_sinkpad_buffer_pool(), in this way we could decide better
which allocator instantiate.
If the allocator was configured to use direct upload or rendering, the
generated derived image created at mapping needs to be destroyed after
unmapping, because, in order to process the surface, it should not be marked
as "busy" by the driver.
The way to experiment with the direct rendering is through and internal
compiler pre-processor flag.
The current change set enables a way to specified at run-time, as a flag
passed to the allocator at instanciation time.
This patch is to change the inheritance of GstVaapiDisplay to GstObject,
instead of GstVaapiMiniObject. In this way we can use all the available
infrastructure for GObject/GstObject such as GstTracer, GIR, etc.
In addition, a new debug category for GstVaapiDisplay is created to make it
easier to trace debug messages. It is named "vaapidisplay" and it transverse
all the VA display backends (DRM, GLX, EGL, Wayland, ...)
This patch is a step forward to expose GstVaapiDisplay for users in a future
library.
https://bugzilla.gnome.org/show_bug.cgi?id=768266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Since vaapipostproc is only registered if the driver supports it, all the
support for dynamic loading were removed. Though some leftovers remained.
https://bugzilla.gnome.org/show_bug.cgi?id=773589
In the spirit of the codec split, this patch removes the documentation of
vaapidecode and adds a page per each possible decoder.
Nonetheless, only those available in the compilation system are going to be
instrospected, because the rest are not registered.
vaapidecode has a member named allowed_caps, but this name is not enough
explicit. This patch renames allowed_caps to allowed_sinkpad_caps.
No functional changes were included.
https://bugzilla.gnome.org/show_bug.cgi?id=773497
In order to clarify the use of flag as input parameter, it is renamed to
surface_alloc_flag, since it is used when creating a VA surface with certain
properties.
https://bugzilla.gnome.org/show_bug.cgi?id=773497
When caps reconfiguration is called, the new downstream frame size might be
different. Thus, if the downstream caps change,the display's texture map is
reset.
In addition, during pipeline shutdown, textures in texture map have to be
released, since each one have a reference to the GstVaapiDisplay object, which
is a dangerous circular reference.
https://bugzilla.gnome.org/show_bug.cgi?id=769293
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
instances when created and reuse
This patch improves performance when glimagesink uploads a GL texture.
It caches the GStVaapiTexture instances in GstVaapiDisplay{GLX,EGL}, using an
instance of GstVaapiTextureMap, so our internal texture structure can be found
by matching the GL texture id for each frame upload process, avoiding the
internal texture structure creation and its following destruction.
https://bugzilla.gnome.org/show_bug.cgi?id=769293
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
set_format() is called by upstream when the stream capabilites has changed.
Before, if the new stream is compatible with the old one the VA decoder was
not destroyed. Nonetheless, with this behavoir, the VA decoder ignores
when the upstreamer parsers gets more details of the stream, such as the
framerate. Hence, when the src caps are negotiates, the further sink caps
updates are ignored.
This patch forces the VA decoder destroying and recreation when set_format()
is called.
https://bugzilla.gnome.org/show_bug.cgi?id=770921
