Commit graph

9 commits

Author SHA1 Message Date
Wim Taymans
29d918352b gst/selector/gstinputselector.c: Do g_object_notify() only when not holding the lock to get the property because othe...
Original commit message from CVS:
* gst/selector/gstinputselector.c:
(gst_input_selector_set_active_pad), (gst_input_selector_switch):
Do g_object_notify() only when not holding the lock to get the property
because otherwise we run into a deadlock with the deep-notify handlers
that are possibly installed.
2008-03-20 18:10:29 +00:00
Wim Taymans
1cb3f3903b gst/selector/gstinputselector.c: Release the selector lock when pad alloc happens on a non selected pad.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_event), (gst_selector_pad_bufferalloc),
(gst_selector_pad_chain), (gst_input_selector_set_active_pad):
Release the selector lock when pad alloc happens on a non selected pad.
2008-03-20 17:48:49 +00:00
Wim Taymans
e20e15e5a2 gst/selector/gstinputselector.c: Add pad property to configure behaviour of the unselected pad, it can return OK or N...
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_init), (gst_selector_pad_set_property),
(gst_selector_pad_get_property), (gst_selector_pad_event),
(gst_selector_pad_bufferalloc), (gst_selector_pad_chain),
(gst_input_selector_set_active_pad):
Add pad property to configure behaviour of the unselected pad, it can
return OK or NOT_LINKED, based on the use case.
2008-03-20 17:07:07 +00:00
Wim Taymans
a00c9300d4 gst/selector/gstinputselector.*: Figure out the locking a bit more.
Original commit message from CVS:
* gst/selector/gstinputselector.c:
(gst_selector_pad_get_running_time), (gst_selector_pad_reset),
(gst_selector_pad_event), (gst_selector_pad_bufferalloc),
(gst_input_selector_wait), (gst_selector_pad_chain),
(gst_input_selector_class_init), (gst_input_selector_init),
(gst_input_selector_dispose), (gst_segment_set_start),
(gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_get_property),
(gst_input_selector_get_linked_pad),
(gst_input_selector_is_active_sinkpad),
(gst_input_selector_activate_sinkpad),
(gst_input_selector_request_new_pad),
(gst_input_selector_release_pad),
(gst_input_selector_change_state), (gst_input_selector_block),
(gst_input_selector_switch):
* gst/selector/gstinputselector.h:
Figure out the locking a bit more.
Mark buffers with discont after switching.
Fix initial segment forwarding, make sure to only forward one segment
regardless of what the sequence of buffers/segments is. See #522203.
Improve flushing when blocked.
Return NOT_LINKED when a stream is not selected.
Not API change for the switch signal in the docs.
Fix start/time/accum values of the new segment.
Correctly unlock and flush a blocking selector when going to READY.
2008-03-20 16:48:46 +00:00
Wim Taymans
665be109b1 gst/selector/gstinputselector.c: Add lots of debugging.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_event),
(gst_selector_pad_bufferalloc), (gst_selector_pad_chain),
(gst_input_selector_class_init),
(gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_push_pending_stop):
Add lots of debugging.
Fix time member in the newsegment event.
2008-03-14 17:22:21 +00:00
Wim Taymans
48d66c2c1f gst/selector/gstinputselector.*: Various cleanups.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_class_init),
(gst_selector_pad_finalize), (gst_selector_pad_get_property),
(gst_selector_pad_event), (gst_input_selector_class_init),
(gst_input_selector_init), (gst_input_selector_set_active_pad),
(gst_input_selector_set_property),
(gst_input_selector_get_property),
(gst_input_selector_request_new_pad),
(gst_input_selector_release_pad),
(gst_input_selector_push_pending_stop),
(gst_input_selector_switch):
* gst/selector/gstinputselector.h:
Various cleanups.
Added tags to the pads.
Select active pad based on the pad object instead of its name.
Fix refcount in set_active_pad.
Add property to get the number of pads.
* gst/selector/gstoutputselector.c:
(gst_output_selector_class_init),
(gst_output_selector_set_property),
(gst_output_selector_get_property):
Various cleanups.
Select the active pad based on the pad object instead of its name.
Fix locking when setting the active pad.
* gst/selector/gstselector-marshal.list:
* tests/check/elements/selector.c: (cleanup_pad),
(selector_set_active_pad), (run_input_selector_buffer_count):
Fixes for pad instead of padname for pad selection.
2008-03-13 16:46:04 +00:00
Stefan Kost
188190e0e8 gst/selector/gstinputselector.*: Added "select-all" property to make it work like aggregator in 0.8.
Original commit message from CVS:
* gst/selector/gstinputselector.c:
* gst/selector/gstinputselector.h:
Added "select-all" property to make it work like aggregator in 0.8.
* gst/selector/gstoutputselector.c:
Fix resend-latest behavoiur.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/selector.c:
Add unit tests for selector.
2008-02-25 08:53:51 +00:00
Wim Taymans
a9ae327f9f gst/selector/gstinputselector.c: Don't leak event on pads that are not linked. Fixes #512826.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_event):
Don't leak event on pads that are not linked. Fixes #512826.
2008-02-01 17:08:18 +00:00
Stefan Kost
83e305cf5d Replace the switch plugin with the selector plugin. Add output- selector as the opposite of input-selectoo (was switc...
Original commit message from CVS:
* configure.ac:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.args:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
* docs/plugins/gst-plugins-bad-plugins.signals:
* docs/plugins/inspect/plugin-metadata.xml:
* docs/plugins/inspect/plugin-selector.xml:
* docs/plugins/inspect/plugin-soundtouch.xml:
* docs/plugins/inspect/plugin-switch.xml:
* gst/selector/.cvsignore:
* gst/selector/Makefile.am:
* gst/selector/gstinputselector.c:
* gst/selector/gstinputselector.h:
* gst/selector/gstoutputselector.c:
* gst/selector/gstoutputselector.h:
* gst/selector/gstselector-marshal.list:
* gst/selector/gstselector.c:
* gst/selector/selector.vcproj:
* gst/switch/.cvsignore:
* gst/switch/Makefile.am:
* gst/switch/gstswitch-marshal.list:
* gst/switch/gstswitch.c:
* gst/switch/gstswitch.h:
* gst/switch/switch.vcproj:
* tests/icles/.cvsignore:
* tests/icles/Makefile.am:
* tests/icles/output-selector-test.c:
Replace the switch plugin with the selector plugin. Add output-
selector as the opposite of input-selectoo (was switch). Add a test
for output-selector. Add docs for the elements. The vcproj needs
update. Fixes #500142.
2008-01-29 07:38:31 +00:00
Renamed from gst/switch/gstswitch.c (Browse further)