Handle large, invalid or otherwise unusual chunk sizes.
Verify some chunk sizes to be at least the size they are
expected to be and round up some sizes to even number for
e.g. offset administration, which must also be properly
tracked in push mode.
Standard pull mode loop based SEEK handling fails in push mode,
so convert the SEEK event appropriately and dispatch to upstream.
Also cater for NEWSEGMENT event handling, and properly inform
downstream and application of SEEKABLE capabilities, depending
on scheduling mode and upstream.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(uint64_ceiling_scale), (gst_wavparse_calculate_duration),
(gst_wavparse_stream_headers):
Fix the scaling code.
Fix parsing of the INFO chunks, we were reading the wrong number of
bytes. Fixes#561580.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
Handle the acid chunk and send tempo as part of tags. Other fields are
interesting too, but need more tag-definitions. Fixes#545433.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
Refactor wavparse. Call _reset() from dispose() and move old code from
dispose into reset. This way we don't leak taglists when we abort
parsing. Fix some comments. Move code for skipping a chunk into extra
function. Replace chunk sizes with a const to ease readability.
Original commit message from CVS:
Based on a patch by:
Victor STINNER <victor dot stinner at haypocalc dot com>
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Set variable to NULL after freeing it to prevent double frees
or make failures by another use of it afterwards more obvious
and fix use of it after the freeing.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_loop):
* gst/wavparse/gstwavparse.c: (gst_wavparse_chain):
* sys/ximage/gstximagesrc.c: (composite_pixel):
Fix 'xyz may be used uninitialized' compiler warnings caused
by broken g_assert_not_reached() macro in GLib-2.15.x (it's
not really nice to abort in any case). Fixes#505745.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_srcpad_event):
Fix seeking in .wav files again (#501775). Some people seem to think
they don't need to test their changes when they're just 'reflowing'
some code.
Original commit message from CVS:
* gst/avi/gstavidemux.c:
* gst/wavparse/gstwavparse.c:
Return the result in _activate_pull(). Don't ref element there.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers),
(gst_wavparse_pad_convert), (gst_wavparse_pad_query),
(gst_wavparse_srcpad_event):
Ref the element when we should, but not when we its not needed. Reflow
the event_handling to not leak the event.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
Return FALSE if we can't handle a query instead of changing the
format. Ignore fact when dealing with mpeg audio.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_loop),
(gst_wavparse_chain):
Don't push EOS from the chain function, the element
driving the pipeline is responsible for this. The bug
this was meant to fix seems to be queue not forwarding
EOS in all cases (see #476514).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_eos),
(gst_wavparse_loop), (gst_wavparse_chain):
Add EOS logic for the push-based mode too. Fixes#476514.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
* gst/wavparse/gstwavparse.h:
Implement seek-query. Refactor duration calculations. Appropriate use
of uint64_scale_int and uint64_scale. Move repeadedly calculated stuff
out of loops.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Skip LIST chunks before the fmt chunk (fixes#437499). Also fix
streaming mode regression for file from #343837 with 'bext' chunk
before the 'fmt' chunk.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data):
Only set DISCONT when there actually is a discont or when we just
started.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_add_src_pad),
(gst_wavparse_stream_data):
* gst/wavparse/gstwavparse.h:
Be a bit more clever when dealing with VBR files with FACT tags, we
don't want to timestamp buffers in that case but the estimated BPS can
be used for seeking.
Only send close segment in the streaming thread.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data):
* gst/wavparse/gstwavparse.h:
Apply DISCONT to buffers.
Only apply timestamp to the first sample after a DISCONT, too many VBR
files cause random jitter in the timestamps. Fixes#433119.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry dot fr>
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Use correct format strings for integer types.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_base_init),
(gst_wavparse_create_sourcepad):
Use gst_riff_create_audio_template_caps () instead of the local caps.
This makes updates of the local caps unecessary whenever libgstriff
gets support for new formats.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Relax the audio/mpeg caps again and add FIXME: comment.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
* gst/wavparse/gstwavparse.h:
More sanity check for the header fields. Fix type for 'rate' header
field.
Original commit message from CVS:
* gst/auparse/gstauparse.c: (gst_au_parse_parse_header):
limit caps to the formats we announce in the template
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers),
(gst_wavparse_add_src_pad), (gst_wavparse_stream_data):
fix some crashers/asserts when dealing with broken files
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
Support audio/x-raw-float in wav files. This only works with
plugins-base CVS, using an older version doesn't have any
disadvantages though.
Original commit message from CVS:
* gst/wavenc/gstwavenc.c: (gst_wavenc_create_header_buf),
(gst_wavenc_sink_setcaps):
Correctly handle width!=depth input.
* gst/wavparse/gstwavparse.c:
Already export in the caps that width==8 uses unsigned samples and
everything else uses signed samples.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
Add support for wav files containing audio/x-raw-int with random
depths between 1 and 32 bits.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Streaming mode fixes: don't unref buffer we don't own any longer;
remove bogus adapter flush. Fixes#419338.
Original commit message from CVS:
Patch by: René Stadler <mail@renestadler.de>
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Handle rounding better to not drop last sample frame. Fixes#356692
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_class_init),
(gst_wavparse_reset), (gst_wavparse_init),
(gst_wavparse_destroy_sourcepad), (gst_wavparse_fmt),
(gst_wavparse_parse_file_header), (gst_wavparse_stream_init),
(gst_wavparse_perform_seek), (gst_wavparse_peek_chunk_info),
(gst_wavparse_stream_headers), (gst_wavparse_parse_stream_init),
(gst_wavparse_add_src_pad), (gst_wavparse_stream_data),
(gst_wavparse_loop), (gst_wavparse_chain),
(gst_wavparse_pad_convert), (gst_wavparse_pad_query),
(gst_wavparse_srcpad_event), (gst_wavparse_change_state),
(plugin_init):
* gst/wavparse/gstwavparse.h:
Update docs.
Use boilerplate.
Various code cleanups.
When the bitrate is not known (bps == 0 or compressed formats) let
downstream element guestimate the duration and position and don't
generate timestamps or durations. Fixes#405213.
Fix EOS and ERROR conditions in chain mode, we just need to forward the
error flowreturn upstream.
Original commit message from CVS:
Based on patch by: Jonathan Matthew <jonathan at kaolin wh9 net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_parse_stream_init),
(gst_wavparse_stream_data):
Fix massive memory leak when operating in streaming mode due to
GST_BUFFER_MALLOCDATA() not being set on newly-created buffers.
Fixes#407057.
Original commit message from CVS:
* gst/id3demux/id3v2frames.c: (parse_picture_frame):
We require a -base more recent than 0.10.9, so it's safe to use
GST_TYPE_TAG_IMAGE_TYPE unconditionally now.
* ext/dv/gstdvdec.c: (gst_dvdec_sink_event):
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_sink_event):
Use _newsegment_full() now that we depend on a recent enough core.
* gst/wavparse/gstwavparse.c:
Remove cruft that we don't need any longer now that we depend on
a recent enough -base.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_data):
Fix seeking some more, mostly for speed changes.
Original commit message from CVS:
Patch by: Edward Hervey <edward@fluendo.com>
* configure.ac:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_data):
Send the newsegment event in the streaming thread.
Fixes#347529
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
#define 'fact' RIFF chunk if we are not compiling against
-base CVS (we don't want to depend on -base CVS for this
one define only, and also not for release order reasons).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_other), (gst_wavparse_perform_seek),
(gst_wavparse_get_upstream_size), (gst_wavparse_stream_headers),
(gst_wavparse_add_src_pad), (gst_wavparse_stream_data),
(gst_wavparse_pad_query):
* gst/wavparse/gstwavparse.h:
Use information from 'fact' chunk for length calculation of compressed
samples. Calculate bps if bogus value is found in wav header (embeded
mp2/mp3).
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek):
Make sure we don't read beyond the end of the file (#345232).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_peek_chunk_info),
(gst_wavparse_peek_chunk), (gst_wavparse_stream_headers),
(gst_wavparse_chain):
When operating chain-based, don't make any assumptions about the
chunking of the incoming data and make streaming work on days other
than the second Thursday after a full moon. Also fix up debug
messages here and there and make use of the most excellent new
gst_pad_query_peer_duration() utility function.
Skip any 'bext' chunks in front of the 'fmt ' chunk. Fixes#343837.
* gst/wavparse/gstwavparse.h:
Remove trailing comma after last enum value, some compilers don't
like that.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers):
Fix use of uninitialised values if we're NOT seeking in ready.
Fix typos.
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_get_upstream_size),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data):
Don't try to read beyond the end of the file just because
the header claims a bigger size (like with truncated files).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_add_src_pad),
(gst_wavparse_stream_data), (gst_wavparse_loop):
* gst/wavparse/gstwavparse.h:
Delay source pad creation until we have the first chunk of
media data, so the we can examine the data and adjust the
caps accordingly if required. This makes playback of .wav
files with DTS-declared-as-PCM content work (#313266).
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek):
Fix block alignment calculation. Alignment should be done before
adding the byte offset where the data starts (#335231).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_change_state):
Implement seek in READY (re-fixes #327658)
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event),
(gst_wavparse_sink_activate), (gst_wavparse_sink_activate_pull):
Use DEBUG_OBJECT more.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Pass extra_data to gst_riff_create_audio_caps(), so that
WAVEFORMATEX stuff works. Post audio codec name and post
it as taglist on the bus. Allow up to 8 channesl for raw
PCM in the source pad template caps.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_pad_convert):
Fix conversion from TIME to BYTES format (fixes#326864;
patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>)
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_reset),
(gst_avi_demux_handle_src_event), (gst_avi_demux_parse_stream),
(gst_avi_demux_parse_odml), (gst_avi_demux_peek_tag),
(gst_avi_demux_next_data_buffer), (gst_avi_demux_stream_scan),
(gst_avi_demux_stream_header), (gst_avi_demux_loop):
Construct index for indexless files.
Make sure pad/buffers are correctly reset to NULL once we don't need
them anymore, else we get lovely segfaults/assertions.
* gst/wavparse/gstwavparse.c:
Yes, you can have 96KHz audio and wma in wav :(
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_other), (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_loop), (gst_wavparse_pad_convert),
(gst_wavparse_srcpad_event), (gst_wavparse_sink_activate_pull):
* gst/wavparse/gstwavparse.h:
Use GstSegment to implement more seeking features.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_create_sourcepad), (gst_wavparse_sink_activate):
Use GST_DEBUG_FUNCPTR; add debug message in pad activate function.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_handle_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event):
Set stream time correctly in newsegment.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_handle_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event):
Fix for segment-start/stop API change.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Add some fixes from 0.8 branch: allow 24/32bps songs and
blockalign samples to the header-specified size, if any
(#311070); error out on channels==0 or bitrate==0
(#309043, #304588).
Original commit message from CVS:
* configure.ac:
* gst/wavparse/gstwavparse.c:
* gst/wavparse/gstwavparse.h:
* gst/wavparse/Makefile.am:
Ported wavparse to 0.9 . Playing, seeking and state changes work.
Could need more loving on the headers though.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_audio_caps_with_data):
Do actually fix invalid RIFF fmt header values for alaw
and mulaw audio instead of just saying so.
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Give gst_riff_create_audio_caps_with_data() a chance to
fix up broken format header fields before extracting any
parameters from the header. (fixes#167633)
Original commit message from CVS:
Reviewd by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Fix memleak (#155223).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
add ATRAC3 to STATIC CAPS to fix a warning
* gst/matroska/ebml-read.c:
* gst-libs/gst/riff/riff-read.c:
fix typos
Original commit message from CVS:
gstwavparse.c: it did not build in system with Glib < 2.4 because it
used the macro G_MAXUINT32. Now we define the macro if it is not yet
defined.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_class_init),
(gst_wavparse_stream_init), (gst_wavparse_fmt),
(gst_wavparse_other), (gst_wavparse_loop),
(gst_wavparse_pad_convert), (gst_wavparse_pad_query),
(gst_wavparse_srcpad_event):
* gst/wavparse/gstwavparse.h:
Added some more debugging info.
Fix the case where the length of the file is 0.
Make sure we seek to sample borders.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Throw error if we didn't recognize the stream. Fixes#152289.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Fix memleak.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt),
(gst_wavparse_handle_seek), (gst_wavparse_srcpad_event):
Add the pad to the element after setting up the caps. This
makes it a lot easier to autoplug.
Original commit message from CVS:
Set the explicit caps on the pad when the file is parsed as explicit caps get wiped during state changes. fixes bug #148043
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
mp42/mp43 (no caps) exist too.
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps):
Set pixel_width/height; we've got them in-caps.
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
* gst/wavparse/gstwavparse.c: (plugin_init):
Both are valid primary.
* sys/oss/gstossmixer.c:
Remove i18n hack and enable translations.
Original commit message from CVS:
* ext/audiofile/gstafparse.c : change class to Codec/Demuxer/Audio
* gst/auparse/gstauparse.c : idem
* gst/wavparse/gstwavparse.c : idem
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_destroy_sourcepad),
(gst_wavparse_create_sourcepad):
make PAUSED=>READY=>PAUSED=READY work by not destroying NULL
sourcepads
Original commit message from CVS:
Rewrote wavparse to use riff-read instead of doing bytestream stuff by hand.
Made some useful functions in riff-read non-static.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_create_sourcepad),
(gst_wavparse_parse_fmt), (gst_wavparse_handle_sink_event),
(gst_wavparse_loop):
Missing variable initialization. Add handling of DVI ADPCM. Fix
mis-parsing of LIST chunks. This works around a bug where we mis-
parse non-aligning LIST chunks (so LIST chunks where the contents
don't align with the actual LIST size). The correct fix is to use
rifflib, I'm not going to fix wavparse - too much work. All this
fixes#104878.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_destroy_sourcepad), (gst_wavparse_create_sourcepad),
(gst_wavparse_parse_fmt), (gst_wavparse_change_state):
Hack to make wavparse work with spider (always -> sometimes pad).
Fixes#135862 && #140411.
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_caps), (gst_riff_create_audio_caps),
(gst_riff_create_video_template_caps),
(gst_riff_create_audio_template_caps):
* gst-libs/gst/riff/riff-media.h:
* gst-libs/gst/riff/riff-read.c:
(gst_riff_read_strf_vids_with_data), (gst_riff_read_strf_vids):
* gst-libs/gst/riff/riff-read.h:
* gst/avi/gstavidemux.c: (gst_avi_demux_add_stream):
Add MS RLE support. I added some functions to read out strf chunks
into strf chunks and the data behind it. This is usually color
palettes (as in RLE, but also in 8-bit RGB). Also use those during
caps creation. Lastly, add ADPCM (similar to wavparse - which
should eventually be rifflib based).
* gst/matroska/matroska-demux.c: (gst_matroska_demux_class_init),
(gst_matroska_demux_init), (gst_matroska_demux_reset):
* gst/matroska/matroska-demux.h:
Remove placeholders for some prehistoric tagging system. Didn't add
support for any tag system really anyway.
* gst/qtdemux/qtdemux.c:
Add support for audio/x-m4a (MPEG-4) through spider.
* gst/wavparse/gstwavparse.c: (gst_wavparse_parse_fmt),
(gst_wavparse_loop):
ADPCM support (#135862). Increase max. buffer size because we
cannot split buffers for ADPCM (screws references) and I've seen
files with 2048 byte chunks. 4096 seems safe for now.
Original commit message from CVS:
* ext/aalib/gstaasink.c: (gst_aasink_fixate), (gst_aasink_init):
Add fixate function. (bug #131128)
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_init),
(gst_sdlvideosink_fixate): Add fixate function.
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_link):
Fix attempt to print a non-pointer using GST_PTR_FORMAT.
* gst/wavparse/gstwavparse.c: (gst_wavparse_parse_fmt):
Fix missing break that was causing ulaw to be interpreted as
raw int.
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_class_init): Remove property
that handles osssink fallback.
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_init),
(gst_audio_convert_getcaps):
* gst/qtdemux/qtdemux.c: (qtdemux_audio_caps):
Add audio/x-qdm2 for QDM2 audio.
* gst/sine/gstsinesrc.c: (gst_sinesrc_get):
* gst/sine/gstsinesrc.h: Add example of how to implement tags.
* gst/videoscale/gstvideoscale.c: (gst_videoscale_getcaps):
Decrease minimum size to 16x16.
* gst/wavparse/gstwavparse.c:
Convert disabled pad template caps to new caps.
* sys/ximage/ximagesink.c: (gst_ximagesink_xcontext_get):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_xcontext_get),
(gst_xvimagesink_chain): Throw element error when display cannot
be opened. Increase minimum framerate to 1.0. Check the data
free function on a buffer to make sure it is the type we expect
before manipulating it.
Original commit message from CVS:
2004-01-14 Ronald Bultje <rbultje@ronald.bitfreak.net>
* ext/divx/gstdivxdec.c:
* ext/divx/gstdivxenc.c:
Set category to divx4linux instead of divx (too generic).
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_parse_fmt), (gst_wavparse_handle_sink_event),
(gst_wavparse_loop), (gst_wavparse_change_state):
* gst/wavparse/gstwavparse.h:
fix parsing of WAV files with non-standard fmt-tag size and fix
skipping of unrecognized chunks... Someone please fix this thing
to use rifflib so all this is automated.
* sys/v4l/Makefile.am:
* sys/v4l2/Makefile.am:
Add X_CFLAGS because we depend on X (for overlay).
Original commit message from CVS:
2004-01-04 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/matroska/matroska-demux.c:
Fix EBML-laced block parsing. Diffs are relative to previous
lace, not the first lace. Thanks to Mosu from the Matroska
team for detecting this.
(gst_matroska_demux_parse_blockgroup):
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_parse_fmt), (gst_wavparse_getcaps),
(gst_wavparse_handle_sink_event), (gst_wavparse_loop),
(gst_wavparse_change_state):
* gst/wavparse/gstwavparse.h:
Quickfix for capsnego.
Original commit message from CVS:
Sorry Dave... Add mpegversion=1 to mp3 caps everywhere so that the autoplugger uses mad and not faad for mp3 decoding. This should fix mp3 playback.
Original commit message from CVS:
Add a local copy of riff.h as we don't use rifflib anymore.
Rewrite the main loop to use bytestreams instead of rifflib. Make it a loopbased
filter.
Handle metadata, cues and labels as well
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- all typefind functions are in gst/typefind now
- more typefind functions then before
- some plugins might fail to compile now because I don't have them installed and they
a) require bytestream or
b) haven't had their typefind fixed.
Please fix those plugins and put the typefind functions into gst/typefind if they don't have dependencies
Original commit message from CVS:
Add a parser for metadata
(demux_metadata): Given the buffer containing the metadata, look through it and
get the info out of it.
(wav_new_chunk_callback): Change the if statement to a switch statement.
Handle GST_RIFF_TAG_LIST by changing what the type of list it is and parsing out
metadata if it is "INFO".