Commit graph

3207 commits

Author SHA1 Message Date
Thibault Saunier
4e29b4aa34 doc: Add some missing docstrings 2019-05-13 11:33:49 -04:00
Thibault Saunier
5b2da0835e doc: Fix and add some missing docstrings 2019-05-13 11:33:49 -04:00
Michael Olbrich
0364f74643 meson: set correct install path for gdb helper
The original version of the patch used glib-2.0 but that was later changed
to gstreamer-1.0 for autotools. The meson file was forgotten.

Fix the path to match the one used in libgstreamer-gdb.py.in.
2019-05-11 18:40:15 +02:00
Víctor Manuel Jáquez Leal
19467a7d8d gstbasesink: Fix gir annotation 2019-05-09 08:59:59 +02:00
Aaron Boxer
fa99a88558 gstbasesink: add stats getter method
fixes #355
2019-05-08 14:45:42 -04:00
Rasmus Thomsen
cc9c3c3175 meson: check for libcap via pkg-config
It's possible that setcap is installed, but the libcap headers/libs aren't (e.g.
during cross compilation, when you have the program installed for the host,
but need the headers of the target). Also removes the need to manually check
for the libcap headers.
2019-04-24 13:27:42 +00:00
Sebastian Dröge
f57e79a073 bitwriter: Fix inclusion of header in C++ code
../subprojects/gstreamer/libs/gst/base/gstbitwriter.h: In function 'gboolean _gst_bit_writer_check_remaining(GstBitWriter*, guint32)':
../subprojects/gstreamer/libs/gst/base/gstbitwriter.h:161:31: error: invalid conversion from 'gpointer' {aka 'void*'} to 'guint8*' {aka 'unsigned char*'} [-fpermissive]
   bitwriter->data = g_realloc (bitwriter->data, (new_bit_size >> 3));
                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-04-23 15:15:56 +00:00
Sebastian Dröge
e823f02b5a base: Include gstbitwriter.h in the single-include header 2019-04-23 15:15:56 +00:00
Sebastian Dröge
52f1c98443 libs: Fix various Since markers 2019-04-23 15:07:08 +03:00
Sebastian Dröge
0a0496f98f aggregator: Mark all public structs as Since: 1.14 2019-04-23 14:54:03 +03:00
Sebastian Dröge
0058eeb1de bitwriter: Mark the whole type as Since: 1.16 2019-04-23 14:53:11 +03:00
Robert Rosengren
3b5933eadd netutils: make gst_net_utils_set_socket_dscp external
Internal gst_net_utils_set_socket_dscp renamed and turned into external
function. Similar functionality exists in e.g. multidupsink, which could
instead use this one.
2019-04-22 09:01:14 +00:00
Robert Rosengren
3faab6f017 netutils: Add IPv6 support to QoS DSCP
Added IPv6 support as already implemented in multiudpsink
(gst-plugins-good).
2019-04-22 09:01:14 +00:00
Olivier Crête
61f2d9b07a basesrc: Downgrade EOS warning
In the case of pushfilesrc, this is the expected behaviour, so let's
downgrade the warning to a debug message to avoid confusing users.
2019-04-18 13:55:47 +00:00
Tim-Philipp Müller
41f873fa0a aggregator: fix doc chunk for new buffer-consumed signal
Fixes 'Warning: GstBase: incorrect number of parameters in
comment block, parameter annotations will be ignored.' from
g-ir-scanner.
2019-04-16 23:51:19 +01:00
Mathieu Duponchelle
fee108f7cf basesrc: do not send EOS when automatic_eos is FALSE 2019-04-05 18:00:29 +00:00
Mathieu Duponchelle
ae57b1c76d aggregator: add buffer-consumed pad signal
The signal will be emitted when a buffer was consumed on
a pad, if the newly-added "emit-signals" property has been
set to TRUE.

Handlers connected to the signal will receive a valid reference on
the consumed buffer, allowing for example the retrieval of metas in
order to forward them once an output buffer is pushed out.
2019-04-05 12:13:54 +00:00
Tim-Philipp Müller
93d190b5b3 check: suppress some g-i warnings
gstcheck.c:142: Warning: GstCheck: gst_check_add_log_filter: return value: Invalid non-constant return of bare structure or union; register as boxed type or (skip)
gstcheck.h:178: Warning: GstCheck: gst_check_run_suite: argument suite: Unresolved type: 'Suite*'
2019-03-23 18:17:43 +00:00
Tim-Philipp Müller
cef902814d bitwriter: mark as 'skip' for gobject-introspection
Silences g-ir-scanner warnings. We do the same for ByteWriter.
2019-03-23 17:53:07 +00:00
Matthew Waters
c6691abba1 aggregator: don't leak gap buffer when out of segment 2019-03-21 19:18:46 +11:00
Matthew Waters
619dfc91bb aggregator: take the pad lock around queue gap event removal
As is done for every other queue interaction
2019-03-21 19:18:46 +11:00
Matthew Waters
b8d00b9e6e baseparse: don't reset the disable-passthrough property value
Resetting as a result of _reset() on PAUSED->READY is unexpected.
2019-03-20 17:44:30 +11:00
Nirbheek Chauhan
febfabb39f misc: Fix various compiler warnings on MinGW
gstharness.c: Use G_GSIZE_FORMAT instead of hard-coding %zu
error: unknown conversion type character 'z' in format [-Werror=format]

gst-inspect.c: GPid is void* on non-UNIX, and we only use it on UNIX
error: initialization makes pointer from integer without a cast [-Werror]

gstmeta.c: Use and then discard value
error: value computed is not used [-Werror=unused-value]

With this, gstreamer builds with -Werror on MinGW
2019-02-05 18:45:54 +05:30
Tim-Philipp Müller
41d5f22334 aggregator: fix typo in docs 2019-01-05 18:55:12 +00:00
Michael Olbrich
c5b85da8ef gdb: implement 'gst-dot' and 'gst-print' commands
This adds two custom gdb commands:

'gst-dot' creates dot files that a very close to what
GST_DEBUG_BIN_TO_DOT_FILE() produces. Object properties and buffer content
(e.g. codec-data in caps) are not available.

'gst-print' produces high-level information about GStreamer objects. This
is currently limited to pads for GstElements and events for the pads. The
output can look like this:

(gdb) gst-print pad.object.parent
GstMatroskaDemux (matroskademux0) {
    SinkPad (sink, pull) {
    }
    SrcPad (video_0, push) {
      events:
        stream-start:
          stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/001:1274058367
        caps: video/x-theora
          width: 1920
          height: 800
          pixel-aspect-ratio: 1/1
          framerate: 24/1
          streamheader: < 0x5555557c7d30 [GstBuffer], 0x5555557c7e40 [GstBuffer], 0x7fffe00141d0 [GstBuffer] >
        segment: time
          rate: 1
        tag: global
          container-format: Matroska
    }
    SrcPad (audio_0, push) {
      events:
        stream-start:
          stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/002:1551204875
        caps: audio/mpeg
          mpegversion: 4
          framed: true
          stream-format: raw
          codec_data: 0x7fffe0014500 [GstBuffer]
          level: 2
          base-profile: lc
          profile: lc
          channels: 2
          rate: 44100
        segment: time
          rate: 1
        tag: global
          container-format: Matroska
        tag: stream
          audio-codec: MPEG-4 AAC audio
          language-code: en
    }
}
2018-12-31 16:19:05 +00:00
Michael Olbrich
e43a0c9943 gdb: make the code PEP-8 compliant 2018-12-31 16:19:05 +00:00
Tim-Philipp Müller
33267b2ecc basesrc: ensure submitted buffer list is writable
Fixes flaky appsrc unit test where depending on scheduling
the submitted list might not be writable if submitted via
an action signal from the application thread.

Fixes gst-plugins-base#522
2018-12-19 00:34:40 +00:00
Edward Hervey
34b02908c7 harness: assert on result of gst_pad_push_event()
That assertion was accidentally removed in the refactoring done in
60de1f26c7
2018-12-15 11:07:21 +01:00
Roman Sivriver
c9e2057ec6 gst: fixed the install command for gdb python macros on macos - install -D is not supported by BSD install 2018-12-06 20:22:21 +00:00
KimTaeSoo
bf1979e55f baseparse: Use buffer from short reads instead of pulling again
baseparse internally uses a 64kb buffer for pulling data from upstream.
If a 64kb pull is failing with a short read, it would previously pull
again the requested size.

Doing so is not only inefficient but also seems to cause problems with
some elements (rawvideoparse) where the second pull would fail with EOS.

Short reads are only allowed in GStreamer at EOS.

Closes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/294
2018-11-28 17:38:58 +02:00
Jordan Petridis
84512152c1
Run gst-indent through the files
This is required before we enabled an indent test in the CI.

https://gitlab.freedesktop.org/gstreamer/gstreamer-project/issues/33
2018-11-28 05:58:53 +02:00
Mathieu Duponchelle
f83b8ab701 Revert "harness: Take ownership of floating references (pads, elements) passed to the harness"
This reverts commit 2faf93c009.

THis broke half our unit tests, oops:

https://ci.gstreamer.net/job/GStreamer-master/11203/testReport/
2018-11-27 02:59:41 +01:00
Sebastian Dröge
2faf93c009 harness: Take ownership of floating references (pads, elements) passed to the harness
Without this bindings get confused about the meaning of references, and
we really own these references if they are not already owned by
something else.
2018-11-26 17:03:23 +00:00
Havard Graff
1335110409 tests: fix tests when compiling with glib_checks=disabled
We won't be able to do ASSERT_CRITICAL, but the main body of the tests
are still valid, and given we ship GStreamer with this configuration, it
is important to be able to run some tests against it.
2018-11-10 15:37:36 +00:00
Tim-Philipp Müller
b92e34ebfd Fix distcheck
Follow-up to !18 and #320.
2018-11-08 14:09:32 +00:00
Michael Olbrich
bc621cc335 gst: add some gdb python macros
This adds gdb pretty printer for some GStreamer types.
For GstObject pointers the type and name is added, e.g.
"0x5555557e4110 [GstDecodeBin|decodebin0]".
For GstMiniObject pointers the object type is added, e.g.
"0x7fffe001fc50 [GstBuffer]".
For GstClockTime and GstClockTimeDiff the time is also printed in human
readable form, e.g. "150116219955 [+0:02:30.116219955]".

Fixes #320
2018-11-08 12:36:23 +00:00
Havard Graff
fa34768729 harness: improve _wait_for_clock_id_waits performance
By moving the functionality down to the testclock, the implementation
no longer needs to poll the waits, but rather wait properly for
them to be added.

The performance-hit here would be that by polling the test-clock
regularly, you would create contention on the testclock-lock, making code
using the testclock (gst_clock_id_wait) fighting for the lock.
2018-11-06 11:46:06 +01:00
Thomas Bluemel
36ab067905 clock: Keep weak reference to underlying clock
Fixes potential segmentation fault when using a GstClockID that
is referencing an already freed GstClock

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/187
2018-11-03 19:00:22 +02:00
Sebastian Dröge
c3214e8deb harness: Add API for proposing meta APIs from the allocation query
https://bugzilla.gnome.org/show_bug.cgi?id=797350
2018-10-28 17:05:27 +00:00
Sebastian Dröge
fc3602aec8 queuearray: Only clear dropped item if it is not returned 2018-10-15 18:47:16 +03:00
Sebastian Dröge
2481e542c7 queuearray: Clear items when dropping them and a clear function was defined 2018-10-15 15:28:35 +03:00
Jan Schmidt
04176bede1 ptp clock: Wait for ANNOUNCE before selecting a master
Previously, with opportunistic sync we'd track a master
clock as soon as we see a SYNC message, and hence sync up
faster, but then we'd announce we're synched before seeing
the ANNOUNCE, leaving the clock details like grandmaster-clock
empty.

A better way is to start tracking the clock opportunistically,
but not announce we're synched until we've also seen the ANNOUNCE.
2018-10-11 22:11:51 +11:00
Jan Schmidt
d37fcea225 ptp clock: improve debug
Log message arrival times. Fix a typo in one debug string
2018-10-11 22:11:51 +11:00
Jan Schmidt
6a653437ac ptp clock: Increase tolerance for late follow-up and delay-resp
The follow-up and delay-resp messages carry precise
timestamps for the arrival at the clock master, but
the local return time is unimportant, so we should be very
lenient in accepting them late. Some PTP masters don't
prioritise sending those packets, and we reject all the
responses and never sync - or take forever to do so.

Increase the tolerance to 20x the mean path delay.

Also fix a typo in one debug output that would print
the absolute time of the delay-resp message, not the offset
from the delay-req that it's actually being compared against.
2018-10-11 22:11:51 +11:00
Jan Schmidt
6fcd3c135a ptpclock: Add TRACE level debug output
Add some debugging to be able to tell what is happening
inside the PTP clock protocol handling.
2018-10-11 22:11:51 +11:00
Tim-Philipp Müller
135932872e aggregator: document new "min-upstream-latency" property is in nanosecs
https://bugzilla.gnome.org/show_bug.cgi?id=797213
2018-10-04 00:30:52 +01:00
Vivia Nikolaidou
22d0f40716 queuearray: Add set_clear_func and clear functions
gst_queue_array_clear will clear the GstQueueArray,
gst_queue_array_set_clear_func will set a clear function for each
element to be called on _clear and on _free.

https://bugzilla.gnome.org/show_bug.cgi?id=797218
2018-09-27 19:32:54 +03:00
Mathieu Duponchelle
62d7eaf3aa aggregator: add gtk-doc blurb for new min-upstream-latency prop 2018-09-27 13:20:10 +02:00
Mathieu Duponchelle
97e2e7a63d aggregator: add min-upstream-latency property.
This is exposed as a solution to the use case of plugging in
sources with a higher latency after the aggregator has started
playing with an initial set of sources, allowing to avoid resyncing.

https://bugzilla.gnome.org/show_bug.cgi?id=797213
2018-09-27 12:56:47 +02:00
Tim-Philipp Müller
50c32da91f meson: use library() for libgstcheck instead of always building a shared lib
Otherwise we try to build a shared lib when we build the rest
of GStreamer statically, which won't work because we pass
-DGST_STATIC_COMPILATION when building statically, which means
we won't dllimport public symbols from our libs which means
that on Windows the unit tests will fail to link to libgstcheck.

https://bugzilla.gnome.org/show_bug.cgi?id=797185
2018-09-24 08:39:39 +01:00