Commit graph

14008 commits

Author SHA1 Message Date
Sebastian Dröge
f2a762a3a0 audio{enc,dec}oder: Handle max_latency == GST_CLOCK_TIME_NONE
And initialize the latencies with 0 and NONE.
2015-02-03 12:12:18 +01:00
Jan Schmidt
efe54e50e9 audiobasesink: Don't render a GAP silence buffer
Don't render out silence samples to a buffer, just
start the clock running, since any buffer with the
GAP flag will be discarded in render() now anyway.
2015-01-31 00:45:33 +11:00
Jan Schmidt
1df69786c3 audiobasesink: Make sure the ringbuffer is started before waiting
Don't call the basesink wait_event implementation until we're sure
the ringbuffer is running, because it might wait on a non-running
clock.
2015-01-31 00:45:33 +11:00
Jan Schmidt
8557eead82 audiobasesink: drop GAP buffers, or all buffers in trickmode no-audio mode
Make the base audio sink throw away buffers marked GAP, or all
incoming buffers when performing a trick play with
GST_SEGMENT_TRICKMODE_NO_AUDIO flag set, and make sure to start
the ringbuffer when that happens so the clock starts running.

Preserve the timing calculations when rendering, so state is all
updated the same, but just don't render samples.

https://bugzilla.gnome.org/show_bug.cgi?id=735666
2015-01-31 00:45:32 +11:00
Vincent Penquerc'h
9491157f1a oggdemux: do not throw a flow error on flushing
If the streaming task attempts to read a chain while the pipeline
is stopping (which can happen if the pipeline stops shortly after
start or a new URI being setup in gapless playback case), it will
see a flushing return from upstream, and should then also return
flushing to the caller, rather than emit a flow error.

https://bugzilla.gnome.org/show_bug.cgi?id=722442
2015-01-29 17:58:27 +00:00
Sebastian Dröge
4e44f37abd video-converter: Fix compiler warnings
video-converter.c:3073:48: error: implicit conversion from enumeration type 'GstFormat' to different enumeration type 'GstVideoFormat'
      [-Werror,-Wenum-conversion]
        gst_video_scaler_horizontal (h_scaler, format,
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~            ^~~~~~
video-converter.c:3081:44: error: implicit conversion from enumeration type 'GstFormat' to different enumeration type 'GstVideoFormat'
      [-Werror,-Wenum-conversion]
      gst_video_scaler_vertical (v_scaler, format, lines, d, i, out_w);
      ~~~~~~~~~~~~~~~~~~~~~~~~~            ^~~~~~
video-converter.c:3137:24: error: implicit conversion from enumeration type 'const GstVideoFormat' to different enumeration type 'GstFormat'
      [-Werror,-Wenum-conversion]
    convert->fformat = GST_VIDEO_INFO_FORMAT (in_info);
                     ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../gst-libs/gst/video/video-info.h:125:43: note: expanded from macro 'GST_VIDEO_INFO_FORMAT'
                                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../gst-libs/gst/video/video-format.h:361:59: note: expanded from macro 'GST_VIDEO_FORMAT_INFO_FORMAT'
                                                  ~~~~~~~~^~~~~~
video-converter.c:3157:24: error: implicit conversion from enumeration type 'GstVideoFormat' to different enumeration type 'GstFormat'
      [-Werror,-Wenum-conversion]
    convert->fformat = GST_VIDEO_FORMAT_GRAY8;
2015-01-28 17:44:57 +01:00
Sebastian Dröge
46e141067f video: Update orc files 2015-01-28 17:43:59 +01:00
Wim Taymans
3e576abc54 defs: update 2015-01-28 17:37:35 +01:00
Wim Taymans
f29b966c79 video-converter: add fast-path scaler for some packed YUV formats
Add fast path scaling for YUY2 and other packed YUV formats. Add a new
method to merge the scalers of the Y and UV components into one scaler.
Add faster horizontal 2tap scaler.

See https://bugzilla.gnome.org/show_bug.cgi?id=741987
2015-01-28 17:32:12 +01:00
Wim Taymans
47bd6a138c videoscale: don't do dithering 2015-01-28 17:30:53 +01:00
Wim Taymans
ea3dcdc0da video-converter: the default is BAYER dithering 2015-01-28 17:30:14 +01:00
Wim Taymans
620dc30d0f video-converter: don't do dither when set to NONE 2015-01-28 17:29:45 +01:00
Wim Taymans
e16377c0c8 video-scaler: fix taps calculation for pstride == 1
Take pstride into consideration when calculating the scaler taps.
2015-01-28 11:39:41 +01:00
Jan Schmidt
caff09300b audiobasesink: Make sure the ringbuffer really starts when we need it to
Some audio sink sub-classes (pulsesink) don't start their clock
when the ringbuffer starts, but always have to on EOS. When we
explicitly need to start the ringbuffer, make sure sub-classes will
do it by (ab)using the existing eos_rendering flag.
2015-01-28 16:30:42 +11:00
Jan Schmidt
836dcd93b8 playback-test: Support new skip seek flags
Support the new SEEK_TRICKMODE_KEY_UNITS and SEEK_TRICKMODE_NO_AUDIO
flags added to core

https://bugzilla.gnome.org/show_bug.cgi?id=735666
2015-01-28 03:29:49 +11:00
Luis de Bethencourt
783204824d orc: update orc files 2015-01-27 13:39:14 +00:00
Wim Taymans
e2864494fe video-converter: add fastpath for planar scaling
Add fastpaths for scaling of planar subsampled formats.

See https://bugzilla.gnome.org/show_bug.cgi?id=741987
2015-01-27 10:52:29 +01:00
Wim Taymans
ba98d06767 video-scaler: add support for monochroma formats
Add support for scaling of images with pstride == 1. This can be used
to scale individual planes later.
Rework some of the scaling code to take the pstride as a parameter.
2015-01-27 10:52:29 +01:00
Wim Taymans
3db8879f25 videoscale: disable chroma and matrix operations
Ignore chroma subsampling and color matrix transformations like the
old videoscale used to do. This is to make the performance like it was
before.

See https://bugzilla.gnome.org/show_bug.cgi?id=741987
2015-01-27 10:52:29 +01:00
Wim Taymans
4ab23677a9 video-format: fix GBR unpack 2015-01-27 10:52:29 +01:00
Jan Schmidt
ef42a163e4 audiodecoder: Fix typo in documentation
Fix a couple of harmless warnings in the gtk-doc parsing
2015-01-27 02:12:08 +11:00
Edward Hervey
5e69a0f898 video: Fix leaked dither object in error cases
Coverity CID : 1256564
2015-01-23 12:46:41 +01:00
Luis de Bethencourt
945afe6cc4 visual: fix caps leak
Fix leak of caps event and of caps objects when setting caps on sink and src
pads. Sync audiovisualizer class implementation to the one in gst-plugins-bad.
This commit matches c5ef1bee73 in that module.

https://bugzilla.gnome.org/show_bug.cgi?id=742875
2015-01-21 15:22:15 +00:00
Luis de Bethencourt
684e5e0c87 visual: post QoS messages when dropping frames due to QoS
https://bugzilla.gnome.org/show_bug.cgi?id=742875
2015-01-21 14:47:19 +00:00
Sebastian Dröge
2bd4ea6e8e Constify some static arrays everywhere 2015-01-21 09:49:47 +01:00
Sebastian Dröge
69e338d7dd alsa: Constify channel position table 2015-01-21 09:42:35 +01:00
Sebastian Dröge
8e6fb92886 alsa: Fix indention 2015-01-21 09:42:35 +01:00
Thomas Roos
485ad66a11 alsa: Allow to use 8 bit samples with ALSA
8 bit samples have no (0) as endianness, not the native endianness.

https://bugzilla.gnome.org/show_bug.cgi?id=739446
2015-01-21 09:42:35 +01:00
Sebastian Dröge
564f001aa8 audio-format: Constify the audio format table 2015-01-21 09:39:30 +01:00
Sebastian Dröge
e63ad51dab audiosrc: Fill in the correct silence
For unsigned raw formats this is not all zeroes, and for non-raw formats
we just continue to assume all zeroes for now.

https://bugzilla.gnome.org/show_bug.cgi?id=739446
2015-01-21 09:37:30 +01:00
Thomas Roos
f0f854d501 audiosink: Fill in the correct silence
For unsigned raw formats this is not all zeroes, and for non-raw formats
we just continue to assume all zeroes for now.

https://bugzilla.gnome.org/show_bug.cgi?id=739446
2015-01-21 09:35:55 +01:00
Sebastian Dröge
ce8d261cd6 appsink: Only emit EOS signal after all buffers are consumed
Otherwise the application will possibly shut down the pipeline already
because EOS is received, while there are still some buffers pending.
2015-01-20 19:22:15 +01:00
Vincent Penquerc'h
661588b150 dcodebin2: fix lock/unlock mismatch on multiqueue overrun 2015-01-20 15:09:13 +00:00
Jan Alexander Steffens (heftig)
a636c39638 audioresample: Try to prevent endless looping
Speex may decide not to consume any samples because it can't write any. I've
seen a hang during draining caused by the resample loop never terminating.
In that case, resampling happened as normal until olen was 0 but ilen was
still 1. _process_native then reduced ichunk to 0, so ilen never decreased
below 1 and the loop never terminated.

Instead of reverting 684cf44 ({audioresample: don't skip input samples),
break only if all output samples have been produced and speex refuses
to consume any more input samples.

https://bugzilla.gnome.org/show_bug.cgi?id=732908
2015-01-19 19:36:13 +01:00
Sebastian Dröge
63afbce6be videorate: Add $(GST_PLUGINS_BASE_CFLAGS) to be able to find gst/video/video.h 2015-01-19 11:17:18 +01:00
Nicolas Dufresne
e60158c98f videorate: Implement allocation query
The videorate element keeps 1 buffer internally. This buffer need
to be requested during allocation query otherwise the pipeline may
stall.

https://bugzilla.gnome.org/show_bug.cgi?id=738302
2015-01-18 14:58:36 -05:00
Nicolas Dufresne
2e264103e1 Revert "videorate: Implement allocation query"
This reverts commit 3c04db4a30.
2015-01-18 14:17:07 -05:00
Nicolas Dufresne
3c04db4a30 videorate: Implement allocation query
VideRate keeps 1 buffer in order to duplicate base on closest buffer
relative to targeted time. This extra buffer need to be request
otherwise the pipeline may stall when fixed size buffer pool is used.

https://bugzilla.gnome.org/show_bug.cgi?id=738302
2015-01-18 11:02:00 -05:00
Sebastian Dröge
2228d9f22b decodebin: Fix compilation 2015-01-17 14:51:48 +01:00
Branislav Katreniak
d16df7f70d decodebin: do call set_queue_size in no_more_pads_cb
Consider pipeline: gst-launch-1.0 playbin uri=http://example.com/a.ogg
Consider 128kbit audio stream.

As soon as uridecodebin detects the bitrate, it configures its input
queue2 max-size to 32000 bytes.
The 2MB buffer in multiqueue is nearly 2 orders of magnitude bigger.
This non-deterministically drives queue2 buffer anywhere from
100% to 0% until multiqueue is filled.

This patch sets multiqueue size to 5 buffers early in no_more_pads_cb.

Partly reverts commit db771185ed.

https://bugzilla.gnome.org/show_bug.cgi?id=740689
2015-01-16 20:58:40 +01:00
Vincent Penquerc'h
6ab711f3f1 decodebin: free old groups when switching groups
Old groups are freed with one switch's delay when switching groups.
They're freed in a scratch thread to avoid delaying the switch.
2015-01-16 15:55:10 +00:00
Vincent Penquerc'h
fbff44711a oggmux: fix clipped duration determination for non 0 based segments
https://bugzilla.gnome.org/show_bug.cgi?id=740422
2015-01-16 15:55:10 +00:00
Sebastian Dröge
5b7d9e1954 audio: Keep caps features when building the downstream filter
Based on 5fd4e3e0b6 for video
by Alessandro Decina.
2015-01-15 10:51:37 +01:00
Alessandro Decina
5fd4e3e0b6 videoutils: keep caps features in account when building the downstream filter
See 00c2ce6 and https://bugzilla.gnome.org/show_bug.cgi?id=741263 for reference.
2015-01-15 13:59:10 +11:00
Thiago Santos
24b04aade4 examples: playback: add labels with supported seek range
Add the supported seeking range in the advanced seek area.
Also implement seeking querying the pipeline to retrieve those
values and show to the user. It is done in a smaller frequency
compared to the position/duration querying.
2015-01-14 10:35:34 -03:00
Thiago Santos
a5ed7afb4c decodebin: disable pad link checks as it has already been done
Decodebin has already added the element to the bin and should only
select caps compatible pads. It should disable the pad link checks
to avoid doing those again.

https://bugzilla.gnome.org/show_bug.cgi?id=742885
2015-01-14 10:33:52 -03:00
Luis de Bethencourt
4d6f318fc9 visual: cleanup
Shameful fix to a silly mistake in the previous commit. Above email address for
any mockery
2015-01-13 16:58:34 +00:00
Luis de Bethencourt
1bb169410e visual: handle the return of the setup function
Make the baseclass future proof by handling the gboolean return of the setup
function. So if/when a child class uses this the base class is ready.
2015-01-13 16:36:09 +00:00
Luis de Bethencourt
d3a73827e0 Revert "visual: remove unnecessary variable"
This reverts commit a91d521a36.

Being a base class it is better to check the value instead of ignoring it since
a child class could be created that returns valuable information.
2015-01-13 16:09:49 +00:00
Luis de Bethencourt
a91d521a36 visual: remove unnecessary variable
klass->setup (scope) will always return TRUE since all children of this class
do so, no need to store the return. Besides, the value is overwritten a few
lines down before it is ever used. Save the unnecessary memory and instructions.

CID #1226467
2015-01-13 15:14:38 +00:00