Commit graph

9262 commits

Author SHA1 Message Date
Sebastian Dröge
4b8d0a294a mulawdec: Unmap input buffer if failing to map the output buffer 2017-07-27 14:23:14 +03:00
Satya Prakash Gupta
e3f6b9f367 alawdec: Fix Memory leak in error case
https://bugzilla.gnome.org/show_bug.cgi?id=785435
2017-07-27 14:23:14 +03:00
Sebastian Dröge
317d3380bb matroskamux: For audio tracks, take the default duration from the first buffer
... if we don't have any better idea from the caps. This allows writing
SimpleBlocks for a majority of audio streams where the duration of
frames is usually fixed. And as a side effect, allows VLC to play
streams with Opus as it only works with SimpleBlocks currently:
  https://trac.videolan.org/vlc/ticket/18545

https://bugzilla.gnome.org/show_bug.cgi?id=784969
2017-07-25 11:28:46 +03:00
Mark Nauwelaerts
7bd439efb5 qtdemux: preferably send open-ended segment rather than repeated segment events 2017-07-19 18:35:58 +02:00
Mark Nauwelaerts
854f85acb4 qtdemux: fix seeking in fragmented file without mfra random access info
... which no longer worked due to unconditionally clearing sample info and
ending up in inconsistent state.  Let's tread a bit more carefully and also
allow for the old seek handling that resorts to scanning if no mfra info
is available.
2017-07-19 18:35:49 +02:00
Nicola Murino
1bbdfa8738 matroskamux: add properties to control cluster duration
https://bugzilla.gnome.org/show_bug.cgi?id=784971
2017-07-18 10:08:33 +03:00
Sebastian Dröge
c0318f3d60 qtdemux: Fix parsing of RLE depth
Regression introduced by 86b427dc70

https://bugzilla.gnome.org/show_bug.cgi?id=784812
2017-07-13 12:47:27 +03:00
Yasushi SHOJI
c7f42cc3bc rtpgsmpay: fix accidental garbage data before actual payload
Do not allocate payload size outbuf if appending payload buffer.

The commit 137672ff18 attached payload
to the output buffer but forgot to remove payload allocation.  That
effectively doubled payload size and add zero'ed or random bytes.

Makes the following pipeline work again:

gst-launch-1.0 -v audiotestsrc wave=2 ! gsmenc ! rtpgsmpay ! rtpgsmdepay ! gsmdec ! autoaudiosink

https://bugzilla.gnome.org/show_bug.cgi?id=784616
2017-07-09 13:21:23 +01:00
Mark Nauwelaerts
286df32e03 matroskademux: segment seek position is expressed in buffer time
... so it need not be corrected again for stream start
2017-07-09 10:55:00 +02:00
Mark Nauwelaerts
dad2b41e4d avidemux: provide average bitrate tag 2017-07-09 10:55:00 +02:00
Olivier Crête
96e71b0286 rtpsession: Send EOS if all internal sources sent bye
The ones which are not internal should not matter, and we should
wait for all sources to have sent their BYEs.

And add unit test

https://bugzilla.gnome.org/show_bug.cgi?id=773218
2017-07-04 21:14:10 -04:00
Olivier Crête
7e7e52caa0 rtpsession: Only send EOS if all sources have been marked bye
Now that multiple sender RTPSource can share the same RTPSession, we
must not send an EOS unless they're all marked bye.
2017-07-04 13:36:44 -04:00
Nicolas Dufresne
bf5cbce3b4 rtprtxreceive: Add memory and boudary checks
This element was not checking if mapping the RTP buffer and the payload
worked, and was not checking if the RTX payload was large enough.

https://bugzilla.gnome.org/show_bug.cgi?id=784484
2017-07-04 09:58:15 -04:00
Tim-Philipp Müller
d712a2f4b7 imagefreeze: fix use-after-free on seek event
Get seqnum before unreffing the seek event.

https://bugzilla.gnome.org/show_bug.cgi?id=784486
2017-07-03 20:43:12 +01:00
Mark Nauwelaerts
f9f1a03653 qtmux: robustify time tracking for sparse subtitle stream 2017-07-01 18:59:14 +02:00
Mark Nauwelaerts
d1d149ce82 qtmux: correctly track chunk size of subtitle stream
... thereby ensuring correct chunk offset tracking for all streams.
2017-07-01 18:59:07 +02:00
Julien Isorce
afbabaefbe rtpstats: fix assertion 'denom > 0' failed
gst_util_uint64_scale_int takes a gint as denom parameter
whereas ctx->clock_rate is a guint32.

It happens when gst_rtp_packet_rate_ctx_reset set clock_rate
to -1.

So just define clock_rate as gint like it is done in rtpsource.h

https://bugzilla.gnome.org/show_bug.cgi?id=784250
2017-06-29 15:58:44 -04:00
Sebastian Dröge
cd17c71dce rtspsrc: Create send/recv mutexes once, not on every connect()
Also fixes a crash caused by freeing an uninitialized mutex in an error
case.

https://bugzilla.gnome.org//show_bug.cgi?id=784282
2017-06-29 18:59:58 +03:00
Mark Nauwelaerts
83987b5037 qtdemux: specify '_swr' atom as a container atom
... so it is parsed as an mp4 style metadata atom as written by muxer
2017-06-28 20:00:44 +02:00
Mark Nauwelaerts
dbcb99ac1d qtmux: initialize mdhd language code as undefined 2017-06-28 20:00:44 +02:00
Nicolas Dufresne
bbe0053f8a rtpjitterbuffer: Add a faststart-min-packets property
When set this property will allow the jitterbuffer to start delivering
packets as soon as N most recent packets have consecutive seqnum. A
faststart-min-packets of zero disables this feature. This heuristic is
also used in rtpsource which implements the probation mechanism and a
similar heuristic is used to handle long gaps.

https://bugzilla.gnome.org/show_bug.cgi?id=769536
2017-06-28 11:51:10 -04:00
Mark Nauwelaerts
949902f1e2 qtmux: correctly calculate overall first_ts to ensure stream sync
... by minding and compensating for the dts_adjustment that may have
been introduced in the PTS timeline.
2017-06-24 17:36:54 +02:00
Mark Nauwelaerts
04fd953713 matroskademux: track highest known cluster position and time
... to use as a fallback initial duration estimate and to provide for
interpolation when scanning for position.
2017-06-24 17:36:54 +02:00
Mark Nauwelaerts
84c6aaf45b matroskademux: improve and simplify searching for cluster and position
... avoiding inefficiency proportional to file size
2017-06-24 17:36:54 +02:00
Mark Nauwelaerts
d7b736fa11 matroskademux: increase chunk size when scanning for cluster 2017-06-24 17:36:54 +02:00
Mark Nauwelaerts
b19ef0df30 matroskademux: maintain variable state when searching for position
... so skipping to next cluster happens efficiently
2017-06-24 17:36:54 +02:00
Sebastian Dröge
c438545dc9 rtspsrc: Actually use the receive lock when receiving, not the send lock 2017-06-22 11:39:16 +03:00
Mathieu Duponchelle
0da5679c6f rtspsrc: do not checksum the stream id
https://bugzilla.gnome.org/show_bug.cgi?id=783307
2017-06-16 17:30:11 +02:00
Tim-Philipp Müller
3a0fe9c2f5 qtmux: add support for muxing PNG
Demuxer already supported it.
2017-06-15 23:31:24 +01:00
Sebastian Dröge
a722f6e832 rtspsrc: Use a mutex for protecting against concurrent send/receives
We currently send data to the RTSP connection from multiple threads:
whenever a command is to be handled and whenever RTCP is generated. This
can cause data corruption or worse if both happen at the same time.

As such, protect gst_rtsp_connection_send() and gst_rtsp_connection_receive()
calls with a mutex. While this means that we hold a mutex during the IO
operation, this is not actually a problem as the IO operation can be
interrupted (gst_rtsp_connection_flush()) at any time and is blocking by
itself anyway.
2017-06-15 15:25:23 +03:00
Sebastian Dröge
deb9c62cd9 qtmux: Un-merge the last two stsc entries after serializing
The last entry will most likely get new samples added to it in "robust"
muxing mode, changing the samples_per_chunk and thus making it wrong to
keep the last two entries merged. It will run into an assertion later
when adding a new sample to the chunk.

Thanks to gdiener@cardinalpeak.com for the analysis of the bug and
proposal for a solution.
2017-06-15 11:50:44 +03:00
Sebastian Dröge
a82e38d607 wavparse: Actually clip to upstream size instead of size of the data chunk
There might be other chunks after the data chunk, so clipping the chunk
size with the data size can lead to a negative number and all following
calculations go wrong and cause crashes or worse.

This was introduced in 3ac119bbe2.

https://bugzilla.gnome.org/show_bug.cgi?id=783760
2017-06-14 00:11:17 +03:00
Vivia Nikolaidou
96cd941788 splitmux: Drop allocation queries
They can cause us to deadlock, while we're waiting for a new frame and
upstream is waiting for the allocation query to be answered before
sending a frame

https://bugzilla.gnome.org/show_bug.cgi?id=783753
2017-06-13 18:29:37 +03:00
Mathieu Duponchelle
f6283b082e rtspsrc: uniquify stream ids
https://bugzilla.gnome.org/show_bug.cgi?id=783307
2017-06-07 23:30:05 +02:00
Jimmy Ohn
55e0b18186 qtdemux: remove not needed code
remove not needed code about res variable.

https://bugzilla.gnome.org/show_bug.cgi?id=783422
2017-06-06 11:02:59 +02:00
Tim-Philipp Müller
18b53c2236 rtph265depay: fix caps leak 2017-06-02 11:30:15 +01:00
Tim-Philipp Müller
a68a7fb65d rtph264depay: simplify buffer accumulation control flow
There is no difference between pushing out a buffer directly
with gst_rtp_base_depayload_push() and returning it from the
process function. The base class will just call _depayload_push()
on the returned buffer as well.

So instead of marshalling buffers through three layers and back,
just push them from one place in handle_nal() and always return
NULL from the process vfunc. This simplifies the code a little.

Also rename _push_fragmentation_unit() to _finish_fragmentation_unit()
for clarity. Push sounds like it means being pushed out, whereas
it might just be pushed into an adapter.

This change has the side-effect that multiple NALs in a single STAP
(such as SPS/PPS) may no longer be pushed out as a single buffer if
we output NALs in byte-stream format (i.e. not aggregate AUs), but
that shouldn't really make any difference to anyone.
2017-06-01 17:32:17 +01:00
Juan Navarro
72d2afda18 rtpsession: print value of unknown RTCP Payload Type
This adds printing the actual value of any unknown RTCP PT
to the already existing WARNING log message.

https://bugzilla.gnome.org/show_bug.cgi?id=783248
2017-05-31 10:20:27 +03:00
Tim-Philipp Müller
a9f9166004 rtpopusdepay: minor perf improvements
Use the ::process_rtp_packet() vfunc to avoid mapping the
RTP buffer twice.

gst_rtp_buffer_get_payload_buffer() returns a new sub-buffer
which will always be writable, so no need to make it writable.
2017-05-24 16:41:45 +01:00
Tim-Philipp Müller
f9a740b319 rtp: opus: use existing utility funcs for copying/dropping metas
We had our own copies of those while the code was in -bad, but now
we can use the existing utility functions instead of re-implementing
them.
2017-05-24 16:18:01 +01:00
Tim-Philipp Müller
4a28e649c3 rtp: cache meta tag quarks and add more utility functions for metas
Every g_quark_from_static_string() is a hash table lookup serialised
on the global quark lock in GLib. Let's just look up the two quarks
we need once and cache them locally for future use. While we're at it,
add new utility functions for the two most commonly used tags
(audio + video). Make first argument a gpointer so we don't have to
cast and make the code ugly. These are used for logging purposes
only anyway.
2017-05-24 13:32:10 +01:00
vijay
810c0bb084 aacparse : Fix, Caps were not set while reusing aacparse
While reusing aacparse caps were not set.This fix enables aacparse to reuse in same pipeline.

https://bugzilla.gnome.org/show_bug.cgi?id=783027
2017-05-24 13:59:52 +02:00
Tim-Philipp Müller
e67a5a9f18 multifile: remove some cruft 2017-05-21 10:33:43 +01:00
Luis de Bethencourt
fb00a357cd multifilesink: fix property name in example pipeline
Since the move from CVS the property name of the documentation example
has been filename instead of location. Users trying the gst-launch
command as is will get:
no property name "filename" in element

Fixing it.
2017-05-20 11:51:33 +01:00
Edward Hervey
4f713717de isomp4: Safely ignore [skip] atoms
Instead of warning about them
2017-05-18 18:12:15 +02:00
Tim-Philipp Müller
6cb49cf2c3 Fix up package name and origin in some plugins 2017-05-18 10:44:07 +01:00
Nicolas Dufresne
b68d936ae0 Remove plugin specific static build option
Static and dynamic plugins now have the same interface. The standard
--enable-static/--enable-shared toggle are sufficient.
2017-05-16 14:41:19 -04:00
Vivia Nikolaidou
a910329f6d splitmuxsink: Add alignment-threshold argument
If a non-reference stream is behind the reference stream by an amount of
time smaller than the alignment threshold (in nsec), it counts as being
after it.

https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-16 15:30:52 +03:00
Vivia Nikolaidou
5f7fe63fea qtmux: Do not check timecode data for mp4 container
Timecode trak is only supported for mov right now, not for mp4. That
code would otherwise create an invalid trak if the muxed video contained
timecode metadata.

https://bugzilla.gnome.org/show_bug.cgi?id=782684
2017-05-16 15:16:58 +03:00
Sebastian Dröge
347e814074 qtmux: When accepting renegotiation, just return TRUE and change nothing
We only accept new caps if they are basically the same. We don't want to
reset anything as if the caps are new, otherwise various state could get
out of sync with the current run.
2017-05-11 20:01:15 +02:00