This patch makes use of GST_PARAM_USER_SHIFT to define the internal
param in encoders to decide which parameters to expose. Thus
gstreamer-vaapi will not interfere with any change in GStreamer in the
future.
Also, the internal symbol was change to
GST_VAAPI_PARAM_ENCODER_EXPOSURE to keep the namespacing.
The Mesa Gallium driver is poorly tested currently, leading to bad user
experience for AMD users. The driver can be added back to the white list at
runtime using the GST_VAAPI_ALL_DRIVERS environment variable.
Adding crop meta x,y to w,h only compensates for left,top
cropping. But we also need to compensate for right,bottom
cropping.
The video meta contains the appropriate w,h (uncropped)
values, so use it instead.
Test:
gst-launch-1.0 -vf videotestsrc num-buffers=500 \
! videocrop top=50 bottom=30 left=40 right=20 \
! vaapipostproc ! vaapisink & \
gst-launch-1.0 -vf videotestsrc num-buffers=500 \
! videocrop top=50 bottom=30 left=40 right=20 \
! vaapipostproc ! identity drop-allocation=1 \
! vaapisink
Mapping a pointer event needs to consider both size and
video-direction operations together, not just one or the other.
This fixes an issue where x,y were not being mapped correctly
for 90r, 90l, ur-ll and ul-lr video-direction. In these directions,
the WxH are swapped and GST_VAAPI_POSTPROC_FLAG_SIZE is set. Thus,
the first condition in the pointer event handling was entered and
x,y scale factor were incorrectly computed due to srcpad WxH
swap.
This also fixes all cases where both video-direction and scaling
are enabled at the same time.
Test that all pointer events map appropriately:
for i in `seq 0 7`
do
GST_DEBUG=vaapipostproc:5 gst-launch-1.0 -vf videotestsrc \
! vaapipostproc video-direction=${i} width=300 \
! vaapisink
GST_DEBUG=vaapipostproc:5 gst-launch-1.0 -vf videotestsrc \
! vaapipostproc video-direction=${i} width=300 height=200 \
! vaapisink
GST_DEBUG=vaapipostproc:5 gst-launch-1.0 -vf videotestsrc \
! vaapipostproc video-direction=${i} height=200 \
! vaapisink
GST_DEBUG=vaapipostproc:5 gst-launch-1.0 -vf videotestsrc \
! vaapipostproc video-direction=${i} \
! vaapisink
done
Advertise to upstream that vaapipostproc can handle
crop meta.
When used in conjunction with videocrop plugin, the
videocrop plugin will only do in-place transform on the
crop meta when vaapipostproc advertises the ability to
handle it. This allows vaapipostproc to apply the crop
meta on the output buffer using vaapi acceleration.
Without this advertisement, the videocrop plugin will
crop the output buffer directly via software methods,
which is not what we desire.
vaapipostproc will not apply the crop meta if downstream
advertises crop meta handling; vaapipostproc will just
forward the crop meta to downstream. If crop meta is
not advertised by downstream, then vaapipostproc will
apply the crop meta.
Examples:
1. vaapipostproc will forward crop meta to vaapisink
gst-launch-1.0 videotestsrc \
! videocrop left=10 \
! vaapipostproc \
! vaapisink
2. vaapipostproc will do the cropping
gst-launch-1.0 videotestsrc \
! videocrop left=10 \
! vaapipostproc \
! identity drop-allocation=1 \
! vaapisink
The encoder is a true gstobject now and all the properties are using
gobject's properties mechanism. Add help functions to handle the properties
between encode and encoder class.
The basic idea is mapping the same property between encoder and encode. All
the encoder's properties will have the same name, the same type in encode.
The set/get property function just forward the property setting/getting to
the encoder using the same property name and value. Because the encoder is
created on needed, we need to cache the property setting in encode.
While ensuring the allowed sink pad caps, the filter attributes set
the frame size restriction, but it is not ensured, at that moment,
that the filter is already instantiaded.
In order to silence the glib logs, this patch add only calls
gst_vaapi_filter_append_caps() if the filter is instantiated.
In commit 18031dc6 surface's parent context is not assigned because of
circular references. Since then (2013), there's has no issue with
subpictures attached to a context, the current only users of this API.
This patch cleans up all of related code with the unused surface's
parent context.
This code doesn't define the profile used by the internal encoder, but
it used to "predict" which is going to be used and to get the caps
restrictions.
Before the profile was predicted by checking the donwstream caps, but
sometimes they are not defined, setting an unknown profile. In order
to enhances this situation, the encoder asks to internal encoder if it
has one. If so, it is used.
To ask the internal encoder's profile a new accessor function was
added: gst_vaapi_encoder_get_profile()
Now that vaapipostproc can possible handle video-direction, it
should also handle the image-orientation event from upstream if
video-direction property is set to auto.
It is requiered to know if postproc is capable to change the video
direction before fixating the source caps.
In order to do it, it'ss required to know if there's a functional VPP,
but that's checked at create() vmethod, which occurs after caps
fixating.
This patch checks for a functional VPP at fixate caps and, if so,
checks for the enabled filtes and later do the caps fixations.
If the video direction is unsupported by the driver, an element
warning is posted in the bus to notify the application.
gst_vaapi_enum_type_get_nick() was added in the library thus it can
be used elsewhere. It retrives the nick from an enum gtype.
The main reason to demote the message's level is because it is not an
error, it's a possible output of the trial and there's a code path
that handles it.
Secondly, it's very annoying when using gallium driver for radeon.
Otherwise the queue will swallow all the available decoder's surfaces
reaching a dead-lock.
This setting might impact the bin's peformance, but it's a trade-off.
When the code path goes to push buffers downstream when no surface
available in decoder context, and it fails the code bails out with a
fatal error.
That behavior is wrong, since it shouldn't be fatal. The use case is
when the video stream is disabled.
This patch just ignores the errors in this situation and demotes the
level of a log message.
For surfaces with different chroma type, it is prefer to initialize
a format which chroma type should be same with surface chroma type
instead of using fixed NV12.
When create vaapi surface, it is better to use the chroma type get
from jpeg file instead of using fixed 420 format. And the correct
chroma type can be determined by horizontal_factor/vertical_factor
flags that get from jpegparse.
If the allocation caps and negotiated caps are the same,
then ensure any previously negotiated video info is also
removed. This can occur when multi-resolution video
decoding returns to it's original resolution.
Fixes#170
This fixes a deadlock in gst_vaapiencode_change_state, which was due to
srcpad's chain function was locked waiting for available buffers. Since the
coded buffers in codedbuf_queue become available after sinkpad consume the
encoded frames, Paused -> Ready state change leads to deadlock. Coded buffers
are never consumed and marked free, hence gst_vaapiencode_handle_frame waits for
available buffers and holds the stream_lock of the srcpad.
Adds vpp mirroring support to vaapipostproc. Use
property video-direction. Valid values are identity,
horiz or vert. Default is identity (no mirror).
Closes#89
v2: Use GstVideoOrientationMethod enum
v3: Don't warn for VA_MIRROR_NONE.
Use GST_TYPE_VIDEO_ORIENTATION_METHOD type.
v4: Query VAAPI caps when setting mirror value
instead of during per-frame processing.
v5: Return TRUE in warning cases when setting mirror value.
https://bugzilla.gnome.org/show_bug.cgi?id=748184 has resurrected
with commit 3e992d8a
Since gst_vaapi_find_preferred_caps_feature() returns a color format
from caps negotiation, different from the default one (NV12), the
postproc enables the color transformation. But when GL_TEXTURE_UPLOAD
feature is negotiated, no color transformation shall be done.
Nonetheless, with commit 3e992d8a the requested format changes
firstly, because there's no video sink yet, so ANY caps are
negotiated; but later, when there's a video sink and a caps
renegotiation, the GL_TEXTURE_UPLOAD is negotiated though the color
format conversion still ongoing. It is required to reset that
conversion.
This patch force default color format when GL_TEXTURE_UPLOAD is
selected as preferred, thus avoiding the color conversion.
Fixes: #157
When the downstream has any caps, then raw video feature will
be used. At this situation, the preferred format should be chose
from caps which contains "vide/x-raw" feature instead of from
the fist allowed caps.
Fixes#142
The vaapi internal encoder's property id are negative, thus they are
different from GObject's property ids.
gst_vaapi_encoder_set_property() should map to the internal encoder
property id, assigned in gst_vaapiencode_default_set_property().
When downstream has any caps, vaapi should not shovel vaapi featured
buffers, but rather plain raw video, assuming always the worst case
scenario (downstream cannot handle featured video memory but raw
system memory buffers).
This patch query the peer caps without any filter, to know if
donwstream just ask for any caps, if so jump to the color space
checking, otherwise do the caps intersection and continue with the
feature selection algorithm.
Fixes: #139
We prefer to use the same format between image and surface for gst
vaapi allocator. The old way may choose different formats between
image and surface. For example, the RGBA image may have a NV12 surface.
So we need to do format conversion when we put/get image to surface.
Some drivers such as iHD can not support such conversion and always
cause a data flow error. There may also have some performance cost
for format conversion when put/get images.
So we prefer to use the same format for image and surface in the
allocator. If the surface can not support that format, we then
fallback to find a best one as the surface format.
Co-authored-by: Víctor Jáquez <vjaquez@igalia.com>
