Add gst_audio_ring_buffer_set_errored() that will mark the
ringbuffer as errored only if it is currently started or paused,
so gst_audio_ringbuffer_stop() can be sure that the error
state means that the ringbuffer was started and needs stop called.
Fixes a crash with osxaudiosrc if the source element posts
an error, because the ringbuffer would not get stopped and CoreAudio
would continue trying to do callbacks.
Also, anywhere that modifies the ringbuffer state, make sure to
use atomic operations, to guarantee their visibility
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5216>
When switching from a raw stream to an encoded stream we need to make sure the
slot is unlinked, there is code in place for this but it wasn't triggered
because the slot being reconfigured wasn't advertised as linked beforehand.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5133>
The drop-frame rules are specified in “SMPTE ST 12-3:2016” and are
consistent with the traditional ones:
“
To minimize fractional time deviation from real time, the first two
super-frame numbers (00 and 01) shall be omitted from the count at the
start of each minute except minutes 00, 10, 20, 30, 40, and 50. Thus the
first eight frame numbers (0 through 7) are omitted from the count at
the start of each minute except minutes 00, 10, 20, 30, 40, and 50.
”
Where “super-frame” is a group of 4 frames for 120 FPS.
Fixes#2797
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5061>
Do not attempt to send a streams-selected message when reassigning
an output slot in case upstream signalled that it is handling stream selection.
In this case decodebin3 doesn't keep track of stream
collections (`dbin->collection` is NULL).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5069>
Setting the input field on the empty slot prevents future linking of it and will
result in flow errors later on.
This was observed in WebKit's MediaStream source element, when it changes the
caps on one of its associated streams, from an encoded format to a raw video
format. The associated stream-id on the sticky stream-start event doesn´t
change, but the element creates a new GstStream with a different ID and sets it
on the stream-start event. Stream parsing is disabled in urisourcebin, so
decodebin3 handles the parsing. Without this patch we would end-up with unlinked
pads in decodebin3 after switching to the raw video format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5067>
Generating the source element is done when urisourcebin is doing the READY to
PAUSED state change, so it is reasonable to set the new source element to that
state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Finally it makes more sense to have an element in READY when attempting to query
information from it (such as SCHEDULING queries or probing live-ness).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5058>
The current implementation copies metas without checking if the buffer
is writable.
The operation that needs to be done, replacing the input buffer and
copying the metas, is only part of that process. We create a new function
that does both.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5054>
Fix compiler warnings about not using the return value when
freeing the GString segment with g_string_free(.., FALSE):
ignoring return value of ‘g_string_free_and_steal’ declared with attribute ‘warn_unused_result’
which we get with newer GLib versions. These were all harmless.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5015>
This is a small optimization and avoids restarting the next parsing
iteration on already accepted data.
On its own it would also fix ZDI-CAN-20968 (see previous commit) but the
previous commit independently is also a valid fix for it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4898>
This will cause an integer overflow a little bit further down because we
allocate a bit more memory to allow for a NUL-terminator.
The caller should've avoided passing that much data in already as it's
not going to be a valid image and there's likely not even that much data
available.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4897>
glfilter will unref input buffer after _transform() call immidiately,
but gpu may still reading input buffer for rendering because gl
api is executed async. Need hold reference for input buffer by
adding parent meta to output buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4846>
Appsink will unref prev sample in dispose function. Which is later
when V4L2 video decoder link with appsink as V4L2 video decoder
will close V4L2 device fd during GST_STATE_CHANGE_READY_TO_NULL.
If the video buffer return to V4L2 video decoder after the decoder
closed V4L2 device fd, V4L2 can't release the video frame buffer
which allocated with MMAP mode as application can't call
VIDIOC_REQBUFS 0 to release the video frame buffer by V4L2 driver.
The memory of the video frame will leak.
Unref the gstbuffer in stop() function, so V4L2 video decoder
can received all video frame buffers and release it before close
V4L2 device fd.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4820>
self->eos was never reset after streamsynchronizer has sent EOS
(except on explicit flush or switching back to PAUSED).
As a result, synchronization was broken if new streams were pushed later
as gst_stream_synchronizer_wait() does not wait if self->eos is set.
Fix this by reseting self->eos on STREAM_START as that means a new
stream is being sent upstream and so a new EOS will follow later on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4755>
When the alignment contains nothing, all its fields are 0 and always
can be satisfied. So there is no need to validate it in this case.
And there are a lot of places just setting this alignment to default
all zero value, this validation generates lots of warnings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4704>
Add d3d11 conversion path to make gst_video_convert_sample() work
for GstD3D11Memory.
Note that just adding "d3d11download" to the exisitng code is
suboptimal from GstD3D11 point of view because:
* d3d11convert element can support crop/colorspace-conversion/scale
all at once while existing software pipeline needs intermediate steps
for the conversion
* "Process everything on GPU then download it to CPU memory" would be likely
faster than "download GPU memory to CPU then processing it on CPU"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4689>
When reconfigure_output_stream entry missing decoder path,
requested_selection should been update with what is really
active/selected immdiately with SELECTION_LOCK hold. So
use an optional message return from reconfigure_output_stream
and post it after release SELECTION_LOCK. This can make sure
other thread call to check_slot_reconfiguration will got
a correct requested_selection.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4656>
decodebin3 will do its best to figure out whether a parsebin is required to
process the incoming stream.
The problem is that for push-based stream it could happen that the stream would
not provide any caps, resulting in nothing being linked internally.
Furthermore, there is the possibility that a stream *with* caps would not be
using a TIME segment, which is required for multiqueue to properly work.
In order to fix those two issues, we force the usage of parsebin on push-based
streams:
* When the pad is linked, if upstream can't provide any caps
* When we get a non-TIME segment
Fixes#2521
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4499>
