Some special videos with mlv fourcc can't be recognized by
qtdemux when the subtype of the video is vide instead of
m1v, and will cause negotiation error in subsequent plugin.
So make the handle in qtdemux_video_caps. It might be better
than nothing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7855>
A zero-sized box is not really a problem and can be skipped to look at any
possibly following ones.
BMD ATEM devices specifically write a zero-sized bmdc box in the sample
description, followed by the avcC box in case of h264. Previously the avcC box
would simply not be read at all and the file would be unplayable.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7564>
Because this depayloader may build several output buffers within one
process run we push them all into a GstBufferList and push them out at
once to make sure that each buffer gets notified about each header
extension.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5378>
The `GstFlowCombiner` is responsible for tracking the flow of each
stream and handle the overal flow return value. Without that, we
can end up with the following scenario:
- Audio+video stream
- Only the video stream is linked downstream
- The audio stream goes EOS, video doesn't yet
-> We update the Flow in the combiner with OK as all streams are not EOS
- Video goes EOS because downstream returned EOS
-> `qtdemux` returns `FLOW_OK` forever because the unlinked audio pad
has `last_flowret==FLOW_OK`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5724>
Because we treat raw audio chunks/samples as keyframes, they were interfering
with seek time adjustment.
Became apparent when the accompanying video stream was I-frame only,
for example ProRes.
Since raw audio streams can be seeked freely, it's fine to just ignore them here,
giving priority to the real keyframes in the video stream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4946>
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2771
This EOS branch exists so that if a seek with a stop is made, qtdemux
stops accepting bytes from the sink after the entire requested playback
range is demuxed, as otherwise we could keep download content that is
not being used.
This patch fixes two flaws that were present in that EOS check:
1) A comparison was made between track time and movie time without conversion.
This made the check trigger early in files with edit lists. This patch fixes
this by converting the track PTS to movie PTS (stream time) for the check.
2) To avoid sending a EOS prematurely when the segment stop is within a GOP and
B-frames are present, the check for EOS should only be done for keyframes. I
gather this was already the intention with the existing code, but because it
used `stream->on_keyframe` instead of the local variable `keyframe` the old
code was checking if the *previous* frame was a keyframe.
It's interesting to note that these two flaws in the old code mask each other
in most cases: the track PTS will have reached the movie end PTS, but EOS would
only be sent if the previous frame was a keyframe. A simple case where they
wouldn't mask each other, reproducing the bug, is a sequence of 3 frame GOPs
with structure I-B-P.
The following validateflow tests have been added to future-proof the
fix:
* validate.test.mp4.qtdemux_ibpibp_non_frag_pull.default
* validate.test.mp4.qtdemux_ibpibp_non_frag_push.default
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5021>
... otherwise streams with constant size samples defined with a single
`sample_size` for all samples in the `stsz` box fall in the category
`chunks_are_samples` in `qtdemux_stbl_init`, overriding the actual
sample count.
`FOURCC_soun` would set this automatically for `compression_id == 0xfffe`,
however `compression_id` is read from the Audio Sample Entry box at an offset
marked as "pre-defined" in some version of the spec and set to 0 both by
GStreamer and FFmpeg for opus streams.
Considering the stream `sampled` flag is set explicitely by other fourcc
variants, doing so for opus seems consistent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4903>
The "Encapsulation of Opus in ISO Base Media File Format" [1] specifications,
§ 4.3.2 Opus Specific Box, indicates that data must be stored as big-endian.
In `build_opus_extension`, `gst_byte_writer_put*_le ()` variants were used,
causing audio streams conversion to Opus in mp4 to offset samples due to the
PreSkip field incorrect value (29ms early in our test cases).
[1] https://opus-codec.org/docs/opus_in_isobmff.html#4.3.2
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4875>
The muxer used a fixed value of 2 channels because the TR 102 366 spec
says they're to be ignored. However, the demuxer still trusted them,
resulting in bad caps.
Make the muxer fill in the correct channel count anyway (FFmpeg already
does) and make the demuxer ignore the value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4739>
The index is already incremented by 3 every iteration so multiplying it
by 3 additionally on each array access is doing it twice and does not
work.
This caused invalid files to be created if there's more than one CEA608
triplet in a buffer, and out of bounds memory reads.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4634>
If we don't do that, clients can rely on this signal to see the final pad
topology but it won't be the real one as some of them will disappear after
emitting that signal. This can happen after injecting a different init segment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4535>
With GST_SEEK_FLAG_SNAP_AFTER present, the previous version would
adjust seek time based on the keyframe farthest away from desired_time.
This was incorrect, because we always want the *earliest* suitable keyframe
to seek to, not the last one.
With this fix, in case of the SNAP_AFTER, we now look for the closest keyframe
that can be found after desired_time. Behaviour for SNAP_BEFORE should remain
unchanged.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4183>
The flowcombiner and active_streams shouldn't be cleared in the
mse-bytestream variant, only in the mss-fragmented one. Otherwise the
soft reset leaves qtdemux in a state where it still believes that it has
streams, but they've been cleared. In that case, a null pointer
dereference happens and the app crashes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4199>
The abort() method of SourceBuffer in Media Source Extensions is
expected to flush the demuxer and discard the current fragment,
if any. The configuration of tracks, if any, should be preserved.
qtdemux has different behavior for flush events depending on the
context.
This patch activates the intended behaviour only for streams of the
VARIANT_MSE_BYTESTREAM type, conformant to the ISO BMFF Bytestream
specification[1]. This flush behaviour is the same as the one
already in use for adaptivedemux sources.
[1] https://www.w3.org/TR/mse-byte-stream-format-isobmff/https://bugzilla.gnome.org/show_bug.cgi?id=795424
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4101>
A data offset with an offset smaller than the moof length is wrong
in smooth streaming streams.
The samples will not be located and eventually playback will
error out. So compensate assuming data is in mdat following moof.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3840>
The av1C box is optional so dropping parsing does not break anything
fundamentally, and there seems to be no historical record how version 0
even looks like while the comments and the parsing disagreed with each
other.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3882>
When using qtdemux in a pipeline that should only work as a pure demuxer (not
for actual playback), qtdemux shouldn't emit new GstSegments to correct
the start time (jump to the future) to ensure that the user experiences no
playback delay. By doing so, it's generating the wrong segments when an append
of data from the past happens. When that happens, downstream elements such as
parsers (eg: aacparse) may clip those buffers laying before the GstSegment and
create problems on the GStreamer client app (eg: WebKit).
Getting buffers clipped out because of the wrong GstSegments started becoming
a problen when this commit was introduced:
ab6e49e9cc audioparsers: add back segment clipping to parsers that have lost it
This clipping makes test DASH shaka 35 from MVT tests[1] to fail in
WebKitGTK/WPE (at least) and can potentially cause a number of other problems
in the WebKit Media Source Extensions (MSE) code.
Note that this new behaviour of not emitting new GstSegments only makes sense
when qtdemux is being used as a pure demuxer and not as part of a regular
pipeline. This is why the variant field has been added. When equal to
VARIANT_MSE_BYTESTREAM, it will make qtdemux behave differently in push mode,
taking decisions that meet the expectations for an MSE-like processing mode.
This kind of tweaks have been done in the past for MSS streams, for instance.
That code has been refactored to use VARIANT_MSS_FRAGMENTED now, instead of
its own dedicated boolean flag.
Co-authored by: Alicia Boya García <ntrrgc@gmail.com>
...who suggested to use "variant: mse-bytestream" in the caps to identify that
mode, as proposed in her unmerged patch:
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/467
[1] https://github.com/rdkcentral/mvt
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3867>
