In reverse playback we were not taking into account the current buffer
samples to check if we had reached EOS which was leading to a buffer
with PTS = CLOCK_TIME_NONE containing too many frames followed by a
useless buffer with pts=0 duration=0, and a g_critical issue in
gst_object_sync_values.
Also add a validate based test case.
Without that patch this is how the expectation fails:
``` diff
--- log-asink-sink-expected 2020-05-22 23:22:42.654384579 -0400
+++ log-asink-sink-actual 2020-05-22 23:29:35.671586380 -0400
@@ -27,5 +27,6 @@
buffer: pts=0:00:00.058820861, due=0:00:00.023219955, flags=discont
buffer: pts=0:00:00.035600907, due=0:00:00.023219954, flags=discont
buffer: pts=0:00:00.012380952, due=0:00:00.023219955, flags=discont
-buffer: pts=0:00:00.000000000, due=0:00:00.012380952, flags=discont
+buffer: due=0:00:00.012380953, flags=discont
+buffer: pts=0:00:00.000000000, flags=discont
event eos: (no structure)
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/667>
If core is built as a subproject (e.g. as in gst-build), make sure to use
the gst-plugin-scanner from the built subproject. Without this, gstreamer
might accidentally use the gst-plugin-scanner from the install prefix if
that exists, which in turn might drag in gst library versions we didn't
mean to drag in. Those gst library versions might then be older than
what our current build needs, and might cause our newly-built plugins
to get blacklisted in the test registry because they rely on a symbol
that the wrongly-pulled in gst lib doesn't have.
This should fix running of unit tests in gst-build when invoking
meson test or ninja test from outside the devenv for the case where
there is an older or different-version gst-plugin-scanner installed
in the install prefix.
In case no gst-plugin-scanner is installed in the install prefix, this
will fix "GStreamer-WARNING: External plugin loader failed. This most
likely means that the plugin loader helper binary was not found or
could not be run. You might need to set the GST_PLUGIN_SCANNER
environment variable if your setup is unusual." warnings when running
the unit tests.
In the case where we find GStreamer core via pkg-config we use
a newly-added pkg-config var "pluginscannerdir" to get the right
directory. This has the benefit of working transparently for both
installed and uninstalled pkg-config files/setups.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/582>
-base plugins will always be found in the build directory, and
core plugins will be found either also via the build directory
(if both core and -base are a subproject) or by getting the
pluginsdir via pkg-config if core is installed.
The GST_PLUGIN_LOADING_WHITELIST env var will make sure we only
pick up plugins from core/base and base plugins only from the
builddir.
There is no reason to look for -base plugins in the install dir.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/582>
If there are two elements and threads attempting to query each other for
an OpenGL context. The locking may result in a deadlock.
We need to unlock each element's context_lock when querying another
element for the OpenGL context in order to allow any other element to
take the lock when the other element is querying for an OpenGL context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/642>
This commit modifies GstVideoMasteringDisplayInfo and GstVideoContentLightLevel
structs so that each value is to be more like hdr_metadata_infoframe struct
of linux drm header and DXGI_HDR_METADATA_HDR10 struct of Windows.
So each value is no more fraction but normalized one as per CTA 861.G spec.
Also the unit of each value will be consistent with H.264, H.265
specifications, hdr_metadata_infoframe struct for linux and
DXGI_HDR_METADATA_HDR10 struct for Windows.
The wordlen ("length") MUST represent the total "number of 32-bit words
in the extension, excluding the four-octet extension header" (rfc3550).
There are cases where already existent padding is reused for adding
the new extension. So the new wordlen should be updated if the new
added extension makes it to increase.
This patch introduces a new API to send and parse mouse scroll events. Mouse
event coordinates are sent relative to the display space of the related output
area. This is usually the size in pixels of the window associated with the
element implementing the GstNavigation interface.
The GST_VIDEO_BUFFER_FLAG_TOP_FIELD flag is a superset of
GST_VIDEO_BUFFER_FLAG_BOTTOM_FIELD as they are defined using other
flags. As a result we can't use GST_BUFFER_FLAG_IS_SET() to check for
those flags.
By setting the extension-ID for TWCC (Transport Wide Congestion Control),
the payloader will embed sequencenumbers as a RTP header-extension
according to https://tools.ietf.org/html/draft-holmer-rmcat-transport-wide-cc-extensions-01#section-2
The negotiation of this being enabled with downstream elements
is done with caps reflecting the way this is communicated using SDP.
With commit "basepayload: Expose onvif-no-rate-control property" the rtp
timestamp changed behaviour when rate control is disabled.
When disabling rate control, we must take care of the stream time to
avoid the timestamps to begin from zero again.
This simply implies not trying to "prepare" those buffers,
as mapping an empty buffer to a video frame does not make
much sense.
This also adds a simple test in compositor that performs
some trivial checking of the handling of gap events, the test
was not failing before, but an error was logged, this is
no longer the case.
Fixes#717
This validate that the base class properly save and return the flow
return value received when gst_rtp_base_depay_push/push_list() helper is
being used.
This is not set anywhere, and it's pretty clear the pipeline in
question has not been tested in a long time. Disable test with
a FIXME, test needs to be rewritten to not use real output devices.
Previously this would've only set discont=TRUE and then for all future
buffers simply returned immediately.
Instead we also need to
a) drain previous input until its buffer time
b) update next_ts and base_ts accordingly for the gap
c) actually store the new buffer after the gap so it can be used in
the future and so the old buffer before the gap is gone
Also update the unit test accordingly so that it actually tests for this
behaviour. Previously it only tested that after the gap we got no output
at all.
By adding this field, buffer producers can now explicitly set the exact
geometry of planes, allowing users to easily know the padded size and
height of each plane.
GstVideoMeta is always heap allocated by GStreamer itself so we can
safely extend it.
When using gst_video_info_align() user had no easy way to retrieve the
padded size and height of each plane.
This can easily be implemented in fill_planes() as it's already called
in align() with the padded height.
Ideally we'd add a plane_size field to GstVideoInfo but the remaining
padding is too small so that would be an ABI break.
Fix#618
When checking the behaviour of live seeking on audiomixer or
adder we don't *really* need real audio devices. audiotestsrc
in live mode is enough to test the behaviour of those elements.
Also avoids people repeatedly wasting hours trying to figure out
whether that failing behaviour is due to their code or not.
This is done by reusing `gst_gl_memory_setup_buffer` avoiding to
duplicate code.
Without a VideoMeta, mapping those buffers lead to GstBuffer mapping the
buffer in system memory even when specifying the GL flags (through the
buffer merging mechanism) making the result totally broken.
Make more flexible. There is an extra
gethostbyname2_r@@GLIBC_2.2.5 (getXXbyYY_r.c:217)
in the trace on the build bots (F30).
Fixes the -base and -good valgrind jobs on the 1.16 branch CI.
The extmap attribute allows mapping RTP extension header IDs to
well-known RTP extension header specifications. See RFC8285 for details.
We store the extmap attribute either as string in the caps
extmap-X=extensionname
where X is the integer extension header ID, or as 3-tuple of strings
extmap-X=<direction,extensionname,extensionattributes>
where direction or extensionattributes are allowed to be the empty
string.
Both formats are allowed because usually only the extension name is
given and it's much simpler to handle in caps.
Add max-reorder property to make the old hard coded reordering limit of
100 configurable. It's particularly useful in some scenarios to set
max-reorder=0 to disable the behavior that the depayloader will drop
packets.
Note that although the default value is 100, the default limit has
increased with one because of the changed if-test. This was done to
allow the max-reorder value to be more intuitive. See tests.
