Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_prepend_default),
(gst_controlled_property_new), (gst_controller_set_unlocked),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
Factor out the 'set' logic into gst_controller_set_unlocked for the
gst_controller_set and gst_controller_set_from_list functions.
To make life of the interpolators easier always add a control point
at timestamp zero with the default value.
In the linear interpolator make things more obvious by better variable
naming (slope).
Implement cubic interpolation mode (by using a natural cubic spline)
and map the quadratic interpolation mode to this too (as quadratic
doesn't make much sense, see discussion on the list).
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the cubic interpolation mode and check everywhere
if the interpolation mode could be set as expected.
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
Allow refcount of 3 and 4 because some state thread might still be busy
with it.
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (store_callback),
(GST_START_TEST):
Improve test_async_order to also work when both timers are already
expired when we get scheduled to check it.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
* plugins/indexers/gstindexers.c: (plugin_init):
Use #ifdef for HAVE_XYZ for consistency.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/filesink.c: (setup_filesink),
(cleanup_filesink), (GST_START_TEST), (filesink_suite):
Add some unit tests for filesink.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_get_value_array):
* libs/gst/controller/gstcontroller.h:
Clarify the docs of gst_controller_get_value_array(): The array where
the values should be written to must be allocated as there seems to be
no way to get the size of a random GType. This doesn't change any
behaviour. Also fix some typos all over the place and remove an unused,
commented function that is not necessary as g_object_set() could be
used instead.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for gst_controller_get_value_array().
Original commit message from CVS:
* tests/check/gst/gstbuffer.c: (GST_START_TEST):
Disable part of the gst_buffer_try_new_and_alloc test, because
it can happily succeed on 64-bit systems where there's more address
space available.
Original commit message from CVS:
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Add unit test for the improved caps checking from bug #421543.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_control_point_compare),
(gst_control_point_find), (gst_controlled_property_new),
(gst_control_point_free), (gst_controlled_property_free),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_sync_values):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_trigger_get):
Add a new private GstControlPoint struct which "inherits" from
GstTimedValue to allow different interpolators to store internal
values next to each control point. From the outside everything is
still a GstControlPoint so we don't loose binary compatibility.
Also fixup all the GValue handling to not leak GValues or list nodes.
* tests/check/libs/controller.c: (GST_START_TEST):
Free the list nodes and GValues in the controller_misc test.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_finalize), (update_time_level), (apply_segment),
(apply_buffer), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Refactor an cleanup queue a bit.
Do better time level calculations that also work when the srcpad is not
yet running.
Remove some unneeded debug lines.
* tests/check/elements/queue.c: (GST_START_TEST), (queue_suite):
Added testcase for time level measurement.
Try to make some stuff more racefree.
Original commit message from CVS:
Based on patch by: Peter Kjellerstedt <pkj at axis com>
* gst/Makefile.am:
* gst/gstparse.c: (gst_parse_launchv), (gst_parse_launch):
* gst/gstparse.h:
* gst/gstutils.c: (gst_parse_bin_from_description):
* gst/gstutils.h:
Maintain API and ABI when --disable-parse is used. Now that
we have an appropriate error code, we can just return NULL and the
appropriate error when gst_parse_launch() is used despite it having
been disabled (#342564).
* tests/check/Makefile.am:
* tests/check/pipelines/.cvsignore:
* tests/check/pipelines/parse-disabled.c:
Make sure these functions exist and return NULL plus a GError when
--disable-parse is used.
Original commit message from CVS:
* tests/benchmarks/complexity.c: (main):
* tests/benchmarks/mass-elements.c: (main):
Set a good example and don't leak messages.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
* libs/gst/controller/gstinterpolation.c:
Don't crash if someone tries to set an interpolation mode that
is invalid or that isn't supported yet. Fixes#422295.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add a test case for the above.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbuffer.c: (gst_buffer_try_new_and_alloc):
* gst/gstbuffer.h:
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
API: add gst_buffer_try_new_and_alloc() plus unit test (#431940).
Original commit message from CVS:
* tests/benchmarks/complexity.gnuplot:
* tests/benchmarks/complexity.scm:
* tests/benchmarks/mass-elements.gnuplot:
* tests/benchmarks/mass-elements.scm:
Total licensification.
Original commit message from CVS:
* tests/benchmarks/complexity.c:
* tests/benchmarks/mass-elements.c:
Change licence to LGPL as granted by Benjamin and Andy.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_free):
Don't leak GCond.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(GST_START_TEST), (multiqueue_suite):
Add some dead simple unit tests for the 'multiqueue' element
(some bits don't work yet and are disabled for now).
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(mixed_thread), (mixed_async_cb), (gst_systemclock_suite):
Unref some more to make valgrind happy.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter),
(gst_system_clock_id_wait_async), (gst_system_clock_id_unschedule):
Fix anoying regression that survived a few releases. When adding an
async entry while blocking on a sync entry, the sync entry will unblock
but still be busy, so it should continue to wait instead of returning
_BUSY to the app.
Add some comments here and there.
* tests/check/gst/gstsystemclock.c: (mixed_thread),
(mixed_async_cb), (GST_START_TEST), (gst_systemclock_suite):
Add testcase for this.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* tests/check/generic/states.c: (GST_START_TEST), (states_suite):
Copy the current generic/states example from -base and adapt so
we can use the exact same code everywhere.
Check a STATES_IGNORE_ELEMENTS env var which can be used
to ignore certain element factories for this test, which is
what is being done in -base
* tests/check/Makefile.am:
Mention this environment variable.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(simple_launch_lines_suite, test_tee): Disable tee test until I
have time to fix it :-(
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/Makefile.am (noinst_HEADERS):
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_ppc32.h: Add ABI checks for PPC32.
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_ppc32.h: Add ABI checks for PPC32.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.
* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
Original commit message from CVS:
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Add unit test for the GstURIHandler interface in filesrc. This also
tests the newly added file://localhost/foo/bar support.
Original commit message from CVS:
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_hppa.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_hppa.h:
Add ABI structs for HPPA (see #393796).
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_scan_path_level):
Plugin extension on HP-UX is .sl, add that to the list of approved
plugin extensions (see #393796).
* tests/check/gst/gstpad.c: (GST_START_TEST):
ulong => gulong. Fixes compilation with HP-UX compiler.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix compilation if valgrind headers are not available.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST), (queue_suite):
enable queue test again, add tests for the leaky behaviour
Original commit message from CVS:
* configure.ac:
* tests/examples/Makefile.am:
Compile adapter test/example only if the required headers are
available (fixes#391915).
Original commit message from CVS:
* docs/design/part-states.txt:
two tiny additional comments
* gst/gststructure.c:
doc fixing
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
disable test for now, unless it gets fixed
Original commit message from CVS:
* tests/check/elements/.cvsignore:
ignore more
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
try to narrow test failure
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
Fine tune the cases where the segment start/stop values are really
updated.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add tests for the return values of gst_segment_set_seek().
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
It is acceptable to have a refcount of 2 or 3 at this point in the
test, because the pipeline might be just posting its state_change
message. The next line then waits for that message to appear using
bus_poll, so that should be fine too.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gstclock.c: (gst_clock_id_wait):
Make period ids add the interval to the origial requested time instead
of the possibly updated time which can be wrong when there are multiple
waiters for the same id. Fixes#382592.
* gst/gstsystemclock.c: (gst_system_clock_async_thread),
(gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter):
Fix restart in the async notify thread when an async entry is added to
the front of the list. Fixes#381492.
* tests/check/gst/gstsystemclock.c: (store_callback),
(notify_callback), (GST_START_TEST), (gst_systemclock_suite):
Added test for multiple async waits.
Added test for async wait order.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Fix boundary checking in to_running_time() and to_stream_time().
Fixes#377183.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
stream and running time can now be calculated for the complete
clipped segment.
Original commit message from CVS:
* tests/examples/adapter/Makefile.am:
* tests/examples/adapter/adapter_test.c: (run_test_take),
(run_test_take_buffer), (run_tests), (main):
Add new files from the previous commit
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
Original commit message from CVS:
* tests/examples/typefind/typefind.c: (type_found), (main):
Make typefind element example work again (#371894); add a
license header.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set_value):
If someone tries to set a non-UTF8 string field on a structure,
don't just print a warning, but also ignore the request and do
not change/add that field to the structure.
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Test for the above.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_list):
Fix refcounting here too, just like we did for _new_valist() a few
days ago (#357180) (thanks to René Stadler). Also remove all those
'Since: 0.9' from the gtk-doc blobs.
* tests/check/libs/controller.c: (controller_refcount_new_list),
(gst_controller_suite):
Unit test for the above.
Original commit message from CVS:
* gst/gstevent.c: (gst_event_new_seek), (gst_event_parse_seek):
Rename some more @cur to @start to fix docs.
* gst/gstsegment.c: (gst_segment_set_seek):
Fix typo.
time and start must always stay in sync as defined in design doc.
* gst/gsttaglist.c: (gst_tag_list_is_empty):
Rename param to fix docs.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Check that start and time are in sync.
* tests/check/pipelines/parse-launch.c:
(gst_parse_test_element_change_state):
Activate pad before adding to the element.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_tag_list_is_empty):
* gst/gsttaglist.h:
* docs/gst/gstreamer-sections.txt:
API: add gst_tag_list_is_empty() (#360467).
* tests/check/gst/gsttag.c: (GST_START_TEST):
And a test case.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_is_tag_list):
* gst/gsttaglist.h:
Minor fixes to GST_IS_TAG_LIST and gst_is_tag_list().
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Small test for the above.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva org>
* gst/gstevent.c: (_gst_event_copy):
Fix gst_mini_object_make_writable() and gst_event_copy() for events
with event structures by setting the parent refcount address of the
copied structure to the address of the refcount member of the newly
copied event rather than the address of the refcount member of the
original event. Fixes#358737.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Unit test for the above.
Original commit message from CVS:
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add test for the previous fix; add some more tests
for correct refcounting behaviour; fix a few leaks
in test cases; call gst_controller_init() at start
of all tests.
Original commit message from CVS:
* gst/gst.c: (init_pre), (scan_and_update_registry),
(ensure_current_registry_nonforking),
(ensure_current_registry_forking), (ensure_current_registry),
(init_post), (gst_debug_help), (gst_deinit):
* gst/gst_private.h:
* gst/gstregistry.c: (gst_registry_finalize),
(gst_registry_remove_features_for_plugin_unlocked),
(gst_registry_remove_plugin), (gst_registry_scan_path_level),
(gst_registry_scan_path),
(_priv_gst_registry_remove_cache_plugins),
(_priv_gst_registry_cleanup):
* gst/gstregistry.h:
Re-commit the registry changes, along with an extra fix:
When a cached plugin is encountered at a different file path,
update the stored path in the registry cache so that the parent
process knows where it actually is now when it re-reads the registry
cache. Fixes the thing that broke distcheck with the previous commit.
* tests/check/Makefile.am:
Clean up files named 'core' too when running make clean.
* tests/examples/manual/Makefile.am:
Set up a registry path for running these tests, and clean it properly
for distcheck.
Original commit message from CVS:
* tests/check/gst/gstcaps.c: (GST_START_TEST), (gst_caps_suite):
Add some tests for gst_caps_intersect().
* tools/gst-launch.c: (event_loop):
Print all buffering percentages we get, even the 100% one.
Original commit message from CVS:
* gst/gstformat.c: (gst_format_register):
Fix locking order (must take lock before using n_values).
* gst/gstvalue.c: (gst_value_serialize_enum),
(gst_value_deserialize_enum_iter_cmp),
(gst_value_deserialize_enum):
Fix serialisation/deserialisation of custom registered GstFormats.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Unit test for custom format serialisation/deserialisation.
Original commit message from CVS:
* configure.ac:
* docs/manual/advanced-autoplugging.xml:
* tests/examples/Makefile.am:
* tests/examples/manual/.cvsignore:
* tests/examples/manual/Makefile.am:
* tests/examples/manual/extract.pl:
Extract the manual examples again like we used to do.
Fix one of them.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_parent):
* gst/gstpipeline.c: (do_pipeline_seek):
Small cleanups in docs and code.
* gst/gstsegment.c: (gst_segment_clip):
* tests/check/gst/gstsegment.c: (GST_START_TEST):
if stop == start and start is in the segment, no clipping should be
done. Also add a test for this.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
Update ascii art in documentation.
* gst/gstghostpad.c: (gst_proxy_pad_do_internal_link),
(gst_proxy_pad_set_target_unlocked), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_full),
(gst_ghost_pad_set_target):
Small cleanups and leak fixes.
Remove some checks now that the internal pad is never NULL.
Fix the case where linking pads without a target would create nasty
criticals. Fixes#341029.
Don't assign a GstPadLinkReturn to a gboolean and mess up the return
value of _set_target().
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Some more tests for creating and linking untargeted ghostpads.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstghostpad.c: (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_dispose), (gst_ghost_pad_new_full),
(gst_ghost_pad_new_no_target), (gst_ghost_pad_new),
(gst_ghost_pad_new_from_template),
(gst_ghost_pad_new_no_target_from_template):
* gst/gstghostpad.h:
Refactored *_new() functions.
Templates are now used as a g_object_new() parameter.
Use template in _do_getcaps() if we don't have a target.
Small documentation cleanups.
Added two new constructors:
gst_ghost_pad_new_from_template()
gst_ghost_pad_new_no_target_from_template()
* tests/check/gst/gstghostpad.c: (GST_START_TEST),
(gst_ghost_pad_suite):
Added tests for new ghostpad instanciation functions.
API additions: gst_ghost_pad_new_from_template,
gst_ghost_pad_new_no_target_from_template
Original commit message from CVS:
* gst/gstxml.c:
Improve and detypofy docs.
* tests/check/Makefile.am:
* tests/check/gst/.cvsignore:
* tests/check/gst/gstxml.c: (GST_START_TEST), (gst_xml_suite):
Add a basic test suite for GstXML.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_merge_structure):
* gst/gstcaps.h:
Fix docs and indentation again.
* tests/check/gst/gstquery.c: (GST_START_TEST):
Fix leak in tests and add some more tests.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstquery.c: (gst_query_new_segment):
* tests/check/gst/gstquery.c: (GST_START_TEST):
Initialize variables when creating a new segment query.
Fixes#353121.
Original commit message from CVS:
Patch by: Torsten Schoenfeld <kaffeetisch at gmx dot de>
* gst/gstelement.c: (gst_element_get_bus):
* tests/check/gst/gstelement.c: (GST_START_TEST):
Check for NULL before _reffing the bus. Fixes#353122.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_make_metadata_writable),
(gst_buffer_create_sub):
Copy duration/offset_end/caps when creating a subbuffer of the
complete parent.
Make the subbuffer read-only when we make the metadata writable for
now. Fixes#351768.
* tests/check/gst/gstbuffer.c: (GST_START_TEST):
Added check for metadata copy when creating subbuffers.
Original commit message from CVS:
* gst/gstutils.c: (gst_util_set_value_from_string):
Fix memleak (#351502).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
Add unit test for most of gst_util_set_value_from_string()
(not that one would want to encourage use of this function).
Original commit message from CVS:
* gst/gstinfo.c: (gst_debug_print_object):
Make GST_PTR_FORMAT print messages as well.
* tests/check/gst/gstinfo.c: (printf_extension_log_func),
(GST_START_TEST), (gst_info_suite):
More tests.
Original commit message from CVS:
2006-08-11 Andy Wingo <wingo@pobox.com>
* configure.ac:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_packetizer_new):
* tests/check/libs/gdp.c: (gst_dp_suite): GST_DISABLE_DEPRECATED
is only for users of API that don't want to see deprecated
functions in the headers; people that want to compile out
deprecated code should pass -DGST_REMOVE_DEPRECATED into the
CFLAGS. Fixes the build of multifdsink, or will soon..
Original commit message from CVS:
* libs/gst/controller/gstcontroller.h:
fix ABI size-correction
* tests/check/libs/gdp.c: (gst_dp_suite):
make tests that use deprecated API conditional
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/gstconfig.h.in:
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_print_segment),
(_gst_info_printf_extension_ptr),
(_gst_info_printf_extension_segment):
API: add GST_SEGMENT_FORMAT, which is a printf extension we
register that lets us easily dump GstSegments into debug
logs (#350419).
* tests/check/gst/gstinfo.c: (segment_printf_extension_log_func),
(info_segment_format_printf_extension), (gst_info_suite):
Add simple unit test that logs a bunch of different segments (not
valgrinded at the moment because of leaks in gst_debug_add_log_function).
Original commit message from CVS:
* tests/check/libs/gdp.c: (gst_dp_suite):
Use the architecture information from config.h and not gcc macros
in order to properly disable a test that fails on PPC64.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer_any), (gst_dp_packet_from_caps_any),
(gst_dp_crc), (gst_dp_header_payload_length),
(gst_dp_header_payload_type), (gst_dp_packet_from_event),
(gst_dp_packet_from_event_1_0), (gst_dp_buffer_from_header),
(gst_dp_caps_from_packet), (gst_dp_event_from_packet_0_2),
(gst_dp_event_from_packet), (gst_dp_validate_header),
(gst_dp_validate_payload):
Make debug category static
Constify the crc table.
Do some more arg checking in public functions.
Fix some docs and do some small cleanups.
* tests/check/libs/gdp.c: (GST_START_TEST), (gst_dp_suite):
Add some more checks to see if GDP deals with bogus input.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_create):
Remove unnecessary ref/unref pair
* gst/parse/grammar.y:
Make sure to free the parse buffer on all code paths.
Move a g_free up to the error handler where it's easier to see.
* tests/check/gst/gstevent.c: (test_event):
Extending timeout for downstream travelling events to 10 seconds to
hopefully avoid intermittent failure on the buildbots.
* tests/check/pipelines/parse-launch.c: (run_delayed_test):
Don't manually set the state of the src element - it will happen as a
natural consequence of the pipeline changing state, and that way it
will do it in the right order too.
Original commit message from CVS:
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Make all uses of identity and fakesink have silent=true to avoid
serialising every passing data structure, which is breaking tests
on FC4 for some unknown reason.
