Commit graph

2426 commits

Author SHA1 Message Date
Sebastian Dröge
0ba615848a Revert "pad: Add test for blocking pull probe"
This reverts commit 17d30e944b.

The PULL probe changes break various tests.
2016-02-18 11:43:04 +02:00
Matej Knopp
17d30e944b pad: Add test for blocking pull probe
https://bugzilla.gnome.org/show_bug.cgi?id=761211
2016-02-18 09:44:00 +02:00
Edward Hervey
8ae671cf1d check: Add test for checking scheduling reconfiguration with ghostpads
Showcases the regression introduced by this commit:
Commit: ab55ad7eaa

Author: Stian Selnes <stian@pexip.com>
Date:   Wed Jan 27 13:20:23 2016 +0100

ghostpad: Do nothing in _internal_activate_push_default
2016-02-17 15:26:41 +01:00
Havard Graff
87c2254b1d ghostpad: add some tests for activation
https://bugzilla.gnome.org/show_bug.cgi?id=761913
2016-02-17 12:26:12 +02:00
Sebastian Dröge
fd253ab1ab Revert "queue2: add overrun signal"
This reverts commit 8ae8b2723d.

It's not used anymore by anything and was considered a bad idea in general.
2016-02-16 19:11:59 +02:00
Thiago Santos
ac12ad076f benchmark: tracerserialize: add missing return statement
tracerserialize.c:117:1: error: control reaches end of
non-void function [-Werror=return-type]
2016-02-15 12:34:17 -03:00
Thiago Santos
5b64123c54 protection/harness/systemclock: move declaration out of for loop initialization
C90 compilers complain about it
error: ‘for’ loop initial declarations are only allowed in C99 or C11 mode

Also run gst-indent on systemclock tests.
2016-02-15 12:33:46 -03:00
Stian Selnes
336c7bb69c harness: Fix MT issues when forwarding event/query to sink harness
https://bugzilla.gnome.org/show_bug.cgi?id=761910
2016-02-13 15:36:03 +00:00
Havard Graff
668b3215b8 testclock: add crank method
And use it inside GstHarness

API: gst_test_clock_crank()

https://bugzilla.gnome.org/show_bug.cgi?id=761906
2016-02-12 17:08:32 +00:00
Stian Selnes
2b0ff13d07 systemclock: Fix wait/unschedule race
Fixes a race where an entry is set to BUSY in
gst_system_clock_id_wait_jitter() and is UNSCHEDULED before
gst_system_clock_id_wait_jitter_unlocked() starts processing it. The
wakeup added by gst_system_clock_id_unschedule() must be cleaned up.

Two stress tests are added. One test that triggers the specific issue
described above. The second stresses the code path where a wait is
rescheduled because the poll returned early.

https://bugzilla.gnome.org/show_bug.cgi?id=761586
2016-02-10 08:59:33 -03:00
Thiago Santos
682516402d tests: extend the AM_TESTS_ENVIRONMENT from check.mak
To get the CK_DEFAULT_TIMEOUT defined for all tests

https://bugzilla.gnome.org/show_bug.cgi?id=761472
2016-02-05 19:11:10 -03:00
Vineeth TM
ca97a9882f tests:gstinfo: Fix string memory leak
info_fourcc test leaks string.

https://bugzilla.gnome.org/show_bug.cgi?id=761071
2016-01-25 09:41:41 -03:00
Tim-Philipp Müller
afaeec665a tests: info: make work without registry 2016-01-23 16:00:48 +00:00
Tim-Philipp Müller
63421675b1 tracer: rename GST_TRACER_PLUGINS env var to GST_TRACERS 2016-01-22 12:50:08 +00:00
Stefan Sauer
ec75b68984 tracerrecord: don't leak the spec structures
Change the gst_tracer_record_new() api to take the parameters the make the
spec structure directly. This allows us to own the top-level structure and
also collect the args so that we can take ownership of the sub-structures.

https://bugzilla.gnome.org/show_bug.cgi?id=760821
2016-01-22 10:07:26 +01:00
Stefan Sauer
a72368ebb3 test/tracerrecord: unref objects and free string 2016-01-21 08:25:24 +01:00
Florin Apostol
077db508a8 systemclock: tests: added stress test for async order
Keep inserting alarms at the beginning of the list. Due to
https://bugzilla.gnome.org/show_bug.cgi?id=760757
alarm thread will get confused and not serve them in order.
2016-01-20 13:47:20 +02:00
Stefan Sauer
bdc34bd61a tests/gst/info: Fix messages glist memory leak 2016-01-20 09:18:01 +01:00
Vineeth TM
78ab2b530b tests: tracerrecord: Fix messages glist memory leak
https://bugzilla.gnome.org/show_bug.cgi?id=760821
2016-01-20 09:17:15 +01:00
Edward Hervey
71f39aa2ef benchmarks: Disable tracerserialize benchmark on GST_DISABLE_GST_DEBUG
no gst-debugging => no tracer logging (and no pony either)
2016-01-19 11:12:27 +01:00
Tim-Philipp Müller
eb4c5498b5 value: fail flag deserialization on invalid flag names 2016-01-18 19:39:11 +00:00
Tim-Philipp Müller
fb4b673c76 tests: structure: fix wrong flag name in deserialization test
There is no GST_SEEK_FLAGS_NONE only GST_SEEK_FLAG_NONE (but
the deserializer silently skips bad flag names currently).
2016-01-18 19:39:05 +00:00
Stefan Sauer
83d7dbb393 benchmark: improve script
Use a temp file for the log and fix one env-var.
2016-01-16 21:24:19 +01:00
Tim-Philipp Müller
8b88fc487f gst.h: Don't spew warnings if GST_USE_UNSTABLE_API is not defined
Only hide GstTracer and GstTracerRecord API behind GST_USE_UNSTABLE_API,
but don't spew any warnings, otherwise everyone has to define this
to avoid compiler warnings.

This reverts parts of commit 89ee5d948d.
2016-01-16 16:00:16 +00:00
Stefan Sauer
7801a46e5f benchmarks: update the tracer benchmark and add a shell benchmark 2016-01-16 13:31:51 +01:00
Stefan Sauer
89ee5d948d tracer: add a GFlag for the tracer scope
Port all tracers. Add the GST_USE_UNSTABLE_API flag to the internal CFLAGS so
that we don't have to specify this for gir, docs, mkenum, ...
2016-01-16 13:31:51 +01:00
Stefan Sauer
10b78d872b tracerrecord: add a log record class
We use this class to register tracer log entry metadata and build a log
template. With the log template we can serialize log data very efficiently.
This also simplifies the logging code, since that is now a simple varargs
function that is not exposing the implementation details.

Add docs for the new class and basic tests.

Remove the previous log handler.

Fixes #760267
2016-01-15 21:54:01 +01:00
Stefan Sauer
fff9680c93 benchmark: fix copy'n'past of the file-description comment 2016-01-08 23:35:53 +01:00
Stefan Sauer
bb40a18413 benchmark: add a benchmark for bgo/760267
Big suprise - GstStructure is faster than GVariant.
2016-01-08 23:13:29 +01:00
Tim-Philipp Müller
4febebb962 info: add buffer list support to GST_PTR_FORMAT 2016-01-08 19:25:24 +00:00
Aleksander Wabik
90318900a1 tests: queue2: add test for fill level arithmetic overflow
https://bugzilla.gnome.org/show_bug.cgi?id=755971
2016-01-06 20:00:46 +00:00
Tim-Philipp Müller
4e437a564d tests: value: test buffer serialisation/deserialisation more thoroughly
Tests data/strings as well, not just that we received
something non-NULL back.
2015-12-31 12:21:12 +00:00
Thiago Santos
1751835838 tests: funnel: remove state change from stress tests
Changing states up and down while buffers are being pushed is not
a valid use case. If a pad is deactivated and reactivated during
a buffer push it is racy with the check of pushed sticky events
and the actual chainfunction call. As it might call the chain
without noticing the peer pad lost its previous sticky events.

https://bugzilla.gnome.org/show_bug.cgi?id=758340
2015-12-04 17:26:02 -03:00
Heinrich Fink
87691d0280 systemclock: Add test for gst_clock_get_resolution
In a series of time measurements, the diff between now and previous
timestamps is either 0 or at least as long as get_resolution returned.

https://bugzilla.gnome.org/show_bug.cgi?id=758012
2015-11-13 09:23:44 +01:00
Miguel París Díaz
b09e9592ec pad: test for checking the order of the probe calls
https://bugzilla.gnome.org/show_bug.cgi?id=757197
2015-11-11 14:45:19 +01:00
Philippe Normand
8ae8b2723d queue2: add overrun signal
Notifies that the queue2 is full, same as queue does

https://bugzilla.gnome.org/show_bug.cgi?id=733959
2015-11-06 12:32:10 -03:00
Thiago Santos
533d0ac7f1 pad: tests for accept-caps handling with proxy pads
Adds 3 new tests for testing accept-caps behavior with
proxy-caps pads.

1) A scenario where there is no proxy. The caps should be compared to the
template caps of the pad

2) A scenario where there is a compatible pad. The caps should be compared
to the proxied pad caps (and also with the template)

3) A scenario where there is an incompatible proxy pad. No caps should be
possible at all.

https://bugzilla.gnome.org/show_bug.cgi?id=754112
2015-11-06 11:11:11 -03:00
Florin Apostol
63fa09fc4d uri: tests: added unit test for streams ending in .. without following /
https://bugzilla.gnome.org/show_bug.cgi?id=757065
2015-10-24 20:32:53 +03:00
Vivia Nikolaidou
6ff8fdfc47 segment: Add _full variants of all stream/running_time from/to segment position functions
See formula clarifications in design docs for calculation details.

https://bugzilla.gnome.org/show_bug.cgi?id=756564
2015-10-23 15:50:38 +03:00
Vivia Nikolaidou
45f0f354ac segment: Correct stream_time calc for negative applied rate
Updated gst_segment_position_from_stream_time and gst_segment_to_stream_time to reflect correct calculations for the case when the applied rate is negative.

Pasting from design docs:

===============================
Stream time is calculated using the buffer times and the preceding SEGMENT
event as follows:

    stream_time = (B.timestamp - S.start) * ABS (S.applied_rate) + S.time

For negative rates, B.timestamp will go backwards from S.stop to S.start,
making the stream time go backwards.
===============================

Therefore, the calculation for applied_rate < 0 should be:

    stream_time = (S.stop - B.timestamp) * ABS (S.applied_rate) + S.time

and the reverse:

    B.timestamp = S.stop - (stream_time - S.time) / ABS (S.applied_rate)

https://bugzilla.gnome.org/show_bug.cgi?id=756810
2015-10-20 10:43:07 +03:00
Sebastian Dröge
f7f8312812 segment: Convert function to macro in unit test to get proper line numbers on failures
https://bugzilla.gnome.org/show_bug.cgi?id=748316
2015-10-14 16:59:04 +03:00
Stefan Sauer
5b3cbbc494 tests: fix the tag test
The previous change (see bgo #756069) was causing us to free the same pointer
multiple times. If we actually get a sample back, the test fails, no need to
free anything in that case.
2015-10-05 21:29:49 +02:00
Vineeth TM
456ef2aa1d tests/gst-launch: Fix sample memory leak
When sample is got using gst_tag_list_get_sample_index, it should
be free'd.

https://bugzilla.gnome.org/show_bug.cgi?id=756069
2015-10-05 12:08:30 +01:00
Vineeth TM
215cfcf993 gstreamer: Fix memory leaks when context parse fails
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.

And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.

https://bugzilla.gnome.org/show_bug.cgi?id=753851
2015-10-02 17:31:11 +03:00
Stefan Sauer
8487133114 controlpoint: change the padding to be of arch-independent size
The default padding I introduced in d4f81fb4e6 is
actually only 4 pointers and on 32bit platforms already smaller than the union.
Replace it with a fixed 64byte padding. Don't add the normal padding for now.

Fixes #755822
2015-09-30 17:31:58 +02:00
Stefan Sauer
3037172f48 tests: fix the manual tests by setting the right env-vars 2015-09-28 16:46:14 +02:00
Stefan Sauer
d4f81fb4e6 controller: add the missing abi padding
While this technically is an abi break, we decided to do this:
1) the struct is documented to be internal
2) the struct is alloced and freed inside the library
3) there are no public methods that receive or return instances
4) the only code known to use this struct are classes containd here
2015-09-28 16:23:41 +02:00
Matthew Waters
d5ded15889 bin: implement context propagation when adding elements
When adding an element to a bin we need to propagate the GstContext's
to/from the element.

This moves the GstContext list from GstBin to GstElement and adds
convenience functions to get the currently set list of GstContext's.

This does not deal with the collection of GstContext's propagated
using GST_CONTEXT_QUERY.  Element subclasses are advised to call
gst_element_set_context if they need to propagate GstContext's
received from the context query.

https://bugzilla.gnome.org/show_bug.cgi?id=705579
2015-09-28 18:21:59 +10:00
Stefan Sauer
6e7915d5cd tests/examples: add a demo for the interpolation control source modes
This is in preparation for new modes to be added. In particullar it demonstrates
how the cubic splines overshoot the range.
2015-09-27 11:45:29 +02:00
Vivia Nikolaidou
44ba1565d9 segment: Replaced gst_segment_to_position with gst_segment_position_from_running_time
gst_segment_to_position might cause confusion, especially with the addition of
gst_segment_position_from_stream_time . Deprecated gst_segment_to_position
now, and replaced it with gst_segment_position_from_running_time.

Also added unit tests.
2015-09-26 00:00:08 +02:00