We need GStreamer elements to do the bandwidth estimation as this way
they can also control the pacing of the transmission flow as specified
in the [GCC] algorithm for example.
Bandwidth estimator element are placed right before the "RTPSession" as
an "rtp-aux-sender" element. This way they can use the "Transport-wide
Congestion Control" RTCP feedback messages through the "RTPTwcc" custom
events that are sent by the rtpsession.
Applications are responsible to react to the bandwidth estimator element
and set the encoder target bitrate etc... which means that we can not
pass an estimator as an element factory, so a signal as been chosen
instead.
[GCC]: https://datatracker.ietf.org/doc/html/draft-ietf-rmcat-gcc-02
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2562>
This allows the reception of streams that don't exactly match
the codec preferences. In particular, the ssrc in the codec preferences
is local sender SSRC, the other side is expected to send a different SSRC.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2615>
This new signal allows data-channel consumers to configure signal handlers on a
newly created data-channel, before any data or state change has been notified.
The webrtcin unit-tests were refactored to make use of this new signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2427>
1) check for right macro name when checking for NICE_VERSION_CHECK
2) if libnice version is 0.1.18.1 this should not satisfy
a NICE_VERSION_CHECK(0,1,19).
Fixes build with libnice 0.1.18.1 subproject checkout.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2499>
WHen bundling, if multiple medias are used with the same media payload, then
each of the fec/rtx/red additions would add a distinct payload. This could
very easily overflow the available payload space.
Instead, track the relationship between the media payload value and
the relevant fec/rtx/red payload values and reuse them whenever
necessary, even when bundling.
e.g.
...
a=group:BUNDLE video0 video1
m=video 9 UDP/SAVPF 96 97
a=mid:video0
a=rtpmap:96 VP8/90000
a=rtpmap:97 rtx/90000
a=fmtp:97 apt=96
...
m=video 9 UDP/SAVPF 96 97
a=mid:video1
a=rtpmap:96 VP8/90000
a=rtpmap:97 rtx/90000
a=fmtp:97 apt=96
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2474>
Since both g_value_set_object() and g_weak_ref_get() takes a reference
there will be two new references to the GstWebRTCICE object when there
should be only one. g_value_take_object() has the same functionality as
g_value_set_object() but does not take a reference.
Without this change, the GstWebRTCICE object will be leaked.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2333>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
g_signal_disconnect*() doesn't stop any existing callbacks from running
which means that if the notify::state callback is in progress in one
thread and the data channel object is finalize()ed in another thread,
then there could be a use-after-free trying lock the data channel
object.
We can't reasonably use a GWeakRef as we don't have a 'parent' object to
free the GWeakRef after the data channel is finalized. This is also
complicated by the fact that the application can hold a reference to the
data channel object that would live beyond the lifetime of webrtcbin
itself.
We solve this by implementing a ghetto weak-ref solution internally with
a list of outstanding data channels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Input (sink pads) is the already-ssrc-muxed stream with the relevant rtp
sdes header extensions already applied:
- mid
- stream-id
- repaired-stream-id
Output (src pads) have the pads separated into individual ssrc's as
that's what rtpbin gives us.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
Each rtpbin exposed recv_src pad is now exposed as webrtcbin src_%u pad
now with no meaining applied to the value of %u. Previously this used
to mean the mline in the SDP. If this is is still required, then the
transceiver can be retrieved from the pad and the "mlineindex" property
from the transciever. The "mid" is also retrievable from the
transceiver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1664>
This reverts commit 3cad3455377d5a22faa138d9df840257059776c8.
That commit was breaking the association between an audio and
a video track in the standard case.
In practice, to support carrying separate MediaStream, we are
going a way to map what MediaStreamTrack belong to what MediaStream,
but that will require some thinking about the API.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2023>
From https://datatracker.ietf.org/doc/html/draft-ietf-mmusic-msid-16:
> Multiple media descriptions with the same value for msid-id and
> msid-appdata are not permitted.
Our previous implementation of simply using the CNAME as the msid
identifier and the name of the transceiver as the msid appdata was
misguided and incorrect, and created issues when bundling multiple
video streams together: the ontrack event was emitted with the same
streams for the two bundled medias, at least in Firefox.
Instead, use the transceiver name as the identifier, and expose
a msid-appdata property on transceivers to allow for further
customization by the application. When the property is not set,
msid-appdata can be left empty as it is specified as optional.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2003>
We bind transceivers' fec_percentage property to the FEC encoder
percentage property, and with the binding bidirectional a deadlock
was introduced by the latest changes from !1762:
We take hold of the transceiver's object lock, then add the binding
and set the property to its initial value on the encoder, which causes
set_property to deadlock in the transceiver when the binding kicks in.
Changing the binding type to DEFAULT (source to target) is enough
to address the deadlock and still serves the original intent.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1967>
We need to always add the RTX/RED/ULPFEC elements as rtpbin will only
call us once to request aux/fec senders/receivers.
We also need to regenerate the media section of the SDP instead of
blindly copying from the previous offer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1762>
If there is no jitterbuffer stats we should not attempt to store them in the
global stats structure.
Also add a g_return_if_fail in _gst_structure_take_structure() about this
because it is a programmer error to pass an invalid pointer address there.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1479>
