When we start and we need to produce the first sample, go to the next sample
that will be written into the ringbuffer instead of trying to go to sample 0.
We relied on rather small ringbuffer sizes to correctly go to the current
sample, which breaks whith large buffers.
Fixes#600945
Add drift-tolerance property (defaulting to 20ms) to handle resync after clock
drift or timestamp drift instead of relying on the latency-time value for clock
drift and 500ms for timestamp drift.
Remove warning about discont timestamp and simply resync. The warning is in some
cases not correct and is triggered more frequently now that we lower the
tolerance value.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
I also renamed glib_enum_prefix to glib_gen_prefix as we also use that for the
marshallers. Also rename the rtsp-marshal.list to work with the unified prefix.
gstrtspconnection.c:gst_rtsp_connection_receive() can hang when an error occured
on a socekt. Fix this problem by checking for error on 'other' socket after poll
return.
Fixes#596159
Rhythmbox uses cdda:// URIs of the form cdda://track#device, which
worked before the fix for bug #321532.
Also adds a check for negative track numbers and some unit tests for URI
parsing.
Fixes bug #595454.
Should really have been READABLE and WRITABLE, but those are hard to
add whilst maintaining backwards compatibility. See #343615.
API: GST_MIXER_TRACK_READONLY
API: GST_MIXER_TRACK_WRITEONLY
Check for pulsesink < 0.10.17 because it includes code that is now included in
baseaudiosink. Disable that code in baseaudiosink to be compatible with the
older version.
Take the time of the clock so that the last_time field is set. This is important
for sinks that restart their internal ringbuffer after a caps change and need to
know the last know position.
When going to NULL, we reset the ringbuffer so that it starts beck from 0. We
also make sure that the clock is updated with the elapsed time so that it
alsways increments even when the ringbuffer goes back to 0. When this happened
we need to adjust the sample position for the reset ringbuffer.
Fixes#594136
Add a property to disable rendering of video frames during preroll. This
will only work for videosinks that use the new ::show_frame() vfunc instead
of overriding basesink's preroll and render vfuncs directly.
API: GstVideoSink:show-preroll-frame
The old one did the mistake of not actually advancing the ringbuffer, it just
adjusted the segbase, introducing the whole lenght of the ringbuffer as an
extra delay in the pipeline.
Also make sure that the resync can never go back in time, producing the same
timestamps that has already been produced, as this can cause severe problems
for sinks and other synching mechanisms.
Fixes#594256
Add various conversion functions between time<->bytes<->rtptime that will be
used later on.
Refactor the min/max packet length code so that it can be used for both
sample/frame based payloaders. Cache the returned values.
code cleanups.
When we discover a DISCONT buffer, make the outgoing RTP timestamps have the
same gap as the GStreamer timestamps gap.
Have a custom sample/frame function to generate an offset that the base class
will use for generating RTP timestamps. This results in perfect RTP timestamps
on the output buffers.
Refactor setting metadata on output buffers.
Add some more functionality to _flush().
Handle DISCONT on the input buffers and set the marker bit and DISCONT flag on
the next outgoing buffer.
Flush the pending data on EOS.
Always use the adapter when we need to fragment the incomming buffer. Use more
modern adapter functions to avoid malloc and memcpy. The overall result is that
the code looks cleaner while it should be equally fast and in some case avoid a
memcpy and malloc.
Use the adapter timestamping functions for more precise timestamps in case of
weird disconts.
Cache some values instead of recalculating them.
Add gst_base_rtp_audio_payload_flush() to flush a certain amount of bytes from
the internal adapter.
API: GstBaseRTPAudioPayload::gst_base_rtp_audio_payload_flush()
Allow subclasses to use the OFFSET field on RTP buffers to influence the way in
which RTP timestamps are generated. Usually timestamps are created from the
GStreamer timestamps on the buffer, which could result in imperfect RTP
timestamps.
... which is the default seed when creating a new GRand. Because
GLib in older versions used buffered IO this would take a lot of time.
Instead use the global GRand for getting random numbers and keep the
three instance GRand for backward compatibility with a simple seed.
Fixes bug #593284.
The new API to send messages using GstRTSPWatch will first try to send the
message immediately. Then, if that failed (or the message was not sent
fully), it will queue the remaining message for later delivery. This avoids
unnecessary context switches, and makes it possible to keep track of
whether the connection is blocked (the unblocking of the connection is
indicated by the reception of the message_sent signal).
This also deprecates the old API (gst_rtsp_watch_queue_data() and
gst_rtsp_watch_queue_message().)
API: gst_rtsp_watch_write_data()
API: gst_rtsp_watch_send_message()
With gst_rtsp_connection_set_http_mode() it is possible to tell the
connection whether to allow HTTP messages to be supported. By enabling HTTP
support the automatic HTTP tunnel support will also be disabled.
API: gst_rtsp_connection_set_http_mode()
The error_full callback is similar to the error callback, but allows for
better error handling. For read errors a partial message is provided to
help an RTSP server generate a more correct error response, and for write
errors the write queue id of the failed message is returned.
Rewrote read_line() to support LWS (Line White Space), the method used by
RTSP (and HTTP) to break long lines. Also added support for \r and \n as
line endings (in addition to the official \r\n).
From RFC 2068 section 4.2: "Multiple message-header fields with the same
field-name may be present in a message if and only if the entire
field-value for that header field is defined as a comma-separated list
[i.e., #(values)]." This means that we should not split other headers which
may contain a comma, e.g., Range and Date.
Due to the odd syntax for WWW-Authenticate (and Proxy-Authenticate) which
allows commas both to separate between multiple challenges, and within the
challenges themself, we need to take some extra care to split these headers
correctly.
Do not abort message parsing as soon as there is an error. Instead parse
as much as possible to allow a server to return as meaningful an error as
possible.
Remove any existing Session and Date headers before adding new ones
when sending a request. This may happen if the user of this code reuses
a request (rtspsrc does this when resending after authorization fails).
Do not use sizeof() on an array passed as an argument to a function and
expect to get anything but the size of a pointer. As a result only the
first 4 (or 8) bytes of the response buffer were initialized to 0 in
auth_digest_compute_response() which caused it to return a string which
was not NUL-terminated...
The allowed URI scheme is now:
cdda://(device#)?track
Also allow every combination of uppercase and lowercase
characters for the protocol part.
Fixes bug #321532.
Differentiate subtitle streams and lyrics/cracktastic/complex streams via
the category string in the headers. This seems like a useful distinction
to make, and also seems more future-proof. See #525743.
Add section docs for multichannel, so that it has a short desc in the toc too.
Move the section docs in adio up, so that the follow the copyright like
elsewhere.
This fixed playback of Dirac files with schrodec when upstream wants
a different width/height, basevideocodec accepts this and then
pushes buffers with new caps but content of the old caps.
In the best case this will just result in wrong unit size and a
failure in basestransform elements.
gst_rtsp_watch_queue_data() is similar to gst_rtsp_watch_queue_message()
but allows for queuing any data block for writing (much like
gst_rtsp_connection_write() vs. gst_rtsp_connection_send().)
API: gst_rtsp_watch_queue_data()
The base64 decoding in fill_bytes() expected the size of the read data to
be evenly divisible by four (which is true for the base64 encoded data
itself). This did not, however, take whitespace (especially line breaks)
into account and would fail the decoding if any whitespace was present.
Unparent and free the ringbuffer when going to NULL, like we do with the
audiosrc element. We can do this now because we correctly manage the time
jumping back to 0.
This returns the correct values for all formats that are handled by
GstVideoFormat and makes all the custom get_unit_size functions in
many elements unnecessary.
Hack around thread-safety issues in GObject and our racy _get_type()
functions (we could easily fix the _get_type() functions, but we still
need to hack around the GObject class races until we require a newer
GLib version, I think).
Previously the messages_sent() callback was only called for messages
which had a CSeq, which excluded all data messages. Instead of using the
CSeq as ID, use a simple index counter.
If we don't have any other info, don't try to interpret the
genre field. In particular we don't want to interpret a genre
of 0 as 'Blues' if no other fields are set and the entire tag
is just empty.
In ID3v1, a track number is present only if byte 125 is null AND
byte 126 is non-null. If the track number is not present, don't add
a track number tag with value 0.
Don't use REPLACE_ALL merge mode when that's not really what we want,
as now that REPLACE_ALL actually does what it's supposed to do in
core, we drop tags we wanted to keep, such as the various disc id
tags. Add unit test for this as well. Fixes#579463.
Use the unadjusted internal clock times to calculate the internal/external
offset when calibrating the clock.
When going to NULL, unparent and free the ringbuffer, like we do in the source
element.
See #578506
Add two methods for getting the unadjusted time of the clock and one for
adjusting an internal time. We will need these methods for correctly handling
the time after a gst_audio_clock_reset().
Add a debug category and some debug lines to the audio clock.
API: gst_audio_clock_get_time()
API: gst_audio_clock_adjust()
API: GST_AUDIO_CLOCK_CAST()
After we pause the stream and interrupt the writeout to the ringbuffer, also adjust
the amount of output samples we consumed. We can't do this reliably with the
current API when we are doing trick modes but we can do the right thing for
normal playback.
Add support for a set of standard commands that can be queried and executed to
support applications like DVD. Add query construction and parsing functions.
Add new messages that can be sent on the bus to provide notifications related
to commands, multiangle changes, and button highlight activity.
Add some helper functions to parse the existing GstNavigation events that
elements might receive.
Document it all and add unit tests.
People might queue messages from a thread other than the thread in which
the main context which this watch is attached is iterated from, so use
a GAsyncQueue instead of a GList, so g_list_append() doesn't trample
over list nodes just freed in the other thread. This just fixes issues
I've had with gst-rtsp-server. We might need more locking in various
places here.
We were returning a pointer to a stack variable with the resolved hostname,
which doesn't work.
return a copy of the resolved ip address instead.
Fixes#575256.
Free the key value before we remove the header item from the array. The item we
retrieved from the array is only valid until we remove it from the array.
Save the tunnelid in the connection. Add a method to retrieve the tunnelid so
that a server can store and match the id against other tunnel requests.
Fix the URI in the tunnel requests so that they contain the absolute uri and the
query string if any instead of just the hostname.
Transparently base64 decode the input stream when tunneling.
Add method to set the connection ip address so that it can be included in the
tunnel response.
Add method to connect the two tunnel requests.
Add two callbacks for the async mode to notify a tunnel start and tunnel
complete event.
Add method to reset the watch after the connection has been tunneled.
Various little refactoring to make more stuff reusable.
API: RTSP::gst_rtsp_connection_set_ip()
API: RTSP::gst_rtsp_connection_get_tunnelid()
API: RTSP::gst_rtsp_connection_do_tunnel()
API: RTSP::gst_rtsp_watch_reset()
Add support for tunneling RTSP over HTTP.
Fix documentation some more.
See also #573173.
API: RTSP:gst_rtsp_connection_is_tunneled()
API: RTSP:gst_rtsp_connection_set_tunneled()
Add transport define for RTSP tunneled over HTTP.
Parse rtsph:// uris as tunneled HTTP over TCP.
API: GstRTSPLowerTrans::GST_RTSP_LOWER_TRANS_HTTP
See also #573173.
Add gst_rtsp_connection_get_url() method.
Reserve space for 2 sockets, one for reading and one for writing. Use socket
pointers to select the read and write sockets. This should allow us to implement
tunneling over HTTP soon.
API: RTSP::gst_rtsp_connection_get_url()
The previous change to appsrc/appsink requires people to 'make clean'
to get the marshallers rebuilt (causing a build failure otherwise).
Change some lines in the .list file around to force a rebuild of
these files automatically.
Add a uri handler to appsink.
don't emit signals when we have installed callbacks on appsink.
Add callbacks to appsrc to replace the signals.
Add property to disable callbacks in appsrc, default to TRUE for backwards
compatibility but disable when callbacks are installed.
API: GstAppSrc::emit-signals
API: GstAppSrc::gst_app_src_set_emit_signals()
API: GstAppSrc::gst_app_src_get_emit_signals()
API: GstAppSrc::gst_app_src_set_callbacks()
Add some padding to the callbacks structure just to be safe.
Remove the now invisible marshaller methods from the docs.
Fix a comment in the unit test.
