A deadlock can happen when the source sends EOS when
being put to NULL as the object lock is being held by the
thread that sets the element to NULL and is needed by
the event handler.
The parser assumes that every time there is a 0 before the startcode,
it is part of the startcode. But that's not true.
From the specification
Byte stream NAL unit syntax
zero_byte is a single byte equal to 0x00.
When any of the following conditions are fulfilled, the zero_byte syntax
element shall be present.
– the nal_unit_type within the nal_unit( ) is equal to 7 (sequence parameter
set) or 8 (picture parameter set)
– the byte stream NAL unit syntax structure contains the first NAL unit of an
access unit in decoding order, as specified by subclause 7.4.1.2.3.
The problem with doing this for all startcodes is that a trailing zero can mess
up timestamps. The trailing zero gets prepended to the startcode, which will
carry the PTS and DTS of previous buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=664443
Fix picture level scaling lists derivation from fall-back rule set B,
as specified in 7.4.2.2. More precisely, the sequence level scaling
lists need to be used but intra and inter lists arguments were swapped.
This fixes FRExt/freh5.264 from conformance testing.
https://bugzilla.gnome.org/show_bug.cgi?id=720099
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
While it was a great idea, various g-i based bindings don't support
GArray with entries greater than sizeof(gpointer) :(
So let's just make everybody happy by just using GPtrArray.
And since we're breaking the API, also rename the various descriptor fields
to no longer have the descriptor_ prefix.
It does cost a bit more in terms of memory/cpu usage, but makes it usable
from bindings.
We only check input from the API user with g_return_*_if_fail().
Internal sanity checks should use g_assert() instead, which is
disabled by default for releases.
* Avoid repeating code everywhere, and instead provide all parsing
information in one go.
* Add BAT support
* Refine BAT/CAT identification (by adding PID checks)
Fix calculation of the frame cropping rectangle, and more precisely
the actual cropped height. The frame_crop_top_offset subtraction
was not scaled up with SubHeightC.
Also clean-up variables to align more with (7-18) to (7-21).
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Assign the un-cropped width/height to sps->width/sps->height
during sps header parsing. Added new fields to SPS header structure
to provide the crop-rectangle dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=694068
Cancelled is a 'permanent' state of the uridownloader and is only
removed by a call to _reset. When a download fails we just want to
return NULL on the fetch function and leave the downloader ready
for another fetch, otherwise the user has to call _reset after
failed downloader, even when it didn't call _cancel.
Due to the variety of section types out there, we need to add
some checks when identifying section types.
We check here that the PID is also consistent with the table_id.
The size checks were wrong. The smallest size for a NIT is 16 bytes
(12 for the smallest content + 4 for crc) and the smallest size for
a inner stream loop is 6 bytes (without any descriptors).
Also remove FIXME that has already moved elsewhere
Add API to parse the Slice header. This also calculates the macroblock
position as specified in 6.3.16.
https://bugzilla.gnome.org/show_bug.cgi?id=664274
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add new interface to MPEG-2 video parser that takes GstMpegVideoPacket
arguments instead of data, size, and offset. New functions are called
after gst_mpeg_video_packet_*() and provide the default implementation.
Older API is moved to the deprecated namespace and uses the new functions.
https://bugzilla.gnome.org/show_bug.cgi?id=692933
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
* Add a base page for the library
* Add pages for the base MPEG-TS section and descriptors
* Add pages for the known variants
* Add documentation on more fields/sections/types
* Remove some fixmes that were ... fixed
These are the values officially registered in the base specification
(H.222.0/13818-1). Later on we can add other enums for other variants
Note that the enum is not used in the structure fields (such as a pmt
stream stream_type field) since it can contain values from other
variants.
* In order to avoid future clashing between table_id for the various
mpeg-ts variants, use different enums.
* In order to keep everything clean(ish) and allow for cleaner growth,
split into different files (will need the same for descriptors later)
* Also ... implement free functions for all table types :)
Sorry for this :( But this makes it more in sync with expected type
naming in gobject (i.e. CamelCase and not CamelMAYBECase).
Also split descriptor type enums into the different variants:
* ISO H.222.0 / 13818-1 (i.e. standard mpeg-ts)
* DVB
* ATSC
* ISDB
* miscellaneous
This will avoid future clashes when specs use the same descriptor type
Exposes various MPEG-TS (ISO/IEC 13818-1) and DVB (EN 300 468) Section
Information as well as descriptors for usage by plugins and applications.
This replaces entirely the old GstStructure-based system for conveying
mpeg-ts information to applications and other plugins.
Parsing and validation is done on a "when-needed" basis. This ensures
the minimal overhead for elements and applications creating and using
sections and descriptors.
Since all information is made available, this also allows applications
to parse custom sections and descriptors.
Right now the library is targeted towards parsing, but the structures
could be used in the future to allow applications to create and inject
sections and descriptors (for usage by various mpeg-ts elements).
https://bugzilla.gnome.org/show_bug.cgi?id=702724
Adds a new API gst_uri_downloader_fetch_uri_with_range that allows
downloading only a byte range from an URI. It uses a seek event
sent to the source to signal the range to be downloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=702206
Ignore the display_extension values if they are greater than the width/height
values provided by seqhdr and calculate the PAR based on the seqhdr values.T
his is what DVD players are doing.
Thanks to "David Schleef <ds@schleef.org>"
https://bugzilla.gnome.org/show_bug.cgi?id=685103
In some scenarios, for example in QtWebKit, might be difficult to obtain full
control on the egl display and it might be only accessible indirectly via
eglGetCurrentDisplay().
https://bugzilla.gnome.org/show_bug.cgi?id=700058
When chain method was called after gst_uri_downloader_stop and before state has been changed to NULL, execution was blocking on g_mutex_lock.
Conflicts:
gst-libs/gst/uridownloader/gsturidownloader.c
When downloading and cancelling quickly the uridownloader object and the
element using it could miss the cancelled window and the uridownloader
would fetch the wrong URI and block on subsequent fetches.
This was also problematic when stopping elements, while one task would
call the cancel, another element thread could issue a new fetch_uri. As
the cancel state isn't 'permanent' this fetch_uri would block and
prevent the whole element from stopping and going to NULL.
This patch makes the 'cancelled' state permanent until a
gst_uri_downloader_reset is called. This way the element knows the
window where the uridownloader isn't active and only reactivate it when
ready.
This can be used by parsers to provide pre-parsed information to
downstream elements that would require it (so they can avoid having
to parse the bitstream again).
The content of the EGLImages can be at least in GStreamer orientation,
meaning top line first in memory, or OpenGL orientation, meaning
bottom line first in memory.
Add utility functions to convert quantization matrices from zigzag scan
order (as encoded in the bitstream) into raster scan order. Also provide
another function to reverse the operation.
https://bugzilla.gnome.org/show_bug.cgi?id=693000
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Quantizer matrices are encoded in zigzag scan order in the bitstream,
but they are stored in raster scan order when they are parsed. However,
default matrices were also prepared in zigzag scan order, hence the
mismatch. i.e. the matrices were presented either in raster scan order
if they are explicitly present in the bitstream, or they were presented
in zigzag scan order if the default definitions were to be used instead.
One way to solve this problem is to always expose the quantization
matrices in zigzag scan order, since this is the role of the parser to
not build up stories from the source bitstream and just present what
is in there.
Utility functions will be provided to convert quantization matrices in
either scan order.
https://bugzilla.gnome.org/show_bug.cgi?id=693000
Signed-off-by: Cong Zhong <congx.zhong@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix parsing of residual bytes. This is a two-step process. First,
remaining colums of full vertical resolution (<height>) need to be
processed. Next, remaining bytes in the first row can be processed,
while taking into account the fact that we may have filled in the
first columns already. So, this is not full horizontal resolution.
The following figure helps in understanding the expected order of
operations, for a 8x5 MBs bitplane.
5 5 6 6 6 6 6 6
5 5 1 1 1 2 2 2
5 5 1 1 1 2 2 2
5 5 3 3 3 4 4 4
5 5 3 3 3 4 4 4
So, after tiles 1 to 4 are decoded, vertical tile 5 needs to be
processed (2x5 MBs) and then the horizontal tile 6 (6x1 MBs).
https://bugzilla.gnome.org/show_bug.cgi?id=692461
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix decoding of DIFF6 or NORM6 bitplanes with an odd number of lines
(3x2 "horizontal" tiles). In this case, we have to skip the first line
of macroblocks but <width> number of bytes was used to do so, instead
of the actual <stride> size.
This fixes decoding for the video sample attached to:
https://bugzilla.gnome.org/show_bug.cgi?id=668565https://bugzilla.gnome.org/show_bug.cgi?id=692461
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add gst_vc1_parse_slice_header() function to parse slice headers as
described in 7.1.2. Slice layers are optional and allowed in advanced
profile mode only. Picture header, if available (PIC_HEADER_FLAG),
is parsed but not recorded because it shall be the same as that was
previously parsed with gst_vc1_parse_frame_header().
This fixes SA00049.vc1 conformance test.
https://bugzilla.gnome.org/show_bug.cgi?id=692388
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
