Original commit message from CVS:
1. Add more warnings for the gst core only. Various trival fixes
to quiet the warnings.
2. Fix GstBufferCopyFunc prototype.
3. Re-apply the reverted type!=0 assertion in gst_elementfactory_new.
Original commit message from CVS:
Nobody checks the return value of gst_pad_connect. This patch
renames gst_pad_connect to gst_pad_try_connect and makes
gst_pad_connect return void.
Original commit message from CVS:
Updated the event system to use event,timestamp,data instead of a pointer.
Updated elements to use the event system correctly.
Changed "size" to "filesize" in disksrc.
Original commit message from CVS:
Added prototypes for gst_pad_peek, gst_pad_select and gst_pad_selectv.
Added different scheduling methods in aggregator.
Fixed a bug in fakesrc when setting up the scheduling functions.
Original commit message from CVS:
fixed up macros to match new RealPad stuff, change #if 1 to #if 0 to use, beware you must rebuild all plugins after change
Original commit message from CVS:
API docs updates.
Properly implemented the disksink.
Fixed a compile problem with alsa.
Added bufferpool handling to dvdec
Some compiler warning fixes
Original commit message from CVS:
A rather large patch:
- changed the API for the padtemplates:
- remove the factories (array of pointers) for the padtemplates,
properties and caps. The static array was a nice idea but converting
all the property values to a gpointer was not a good idea.
float properties were not possible, and casting a gint to a pointer
is not very portable. The new API just uses the _padtemplate_new,
_caps_new and _props_new functions to create the templates.
This has the added benefit that the API is now uniform for static
and dynamic templates and that the code can be made cleaner.
- lots of cleanups in the way the capabilities are constructed (va_list)
- lots of updates for all the plugins (new API)
- docs updates (new API)
- removed the videoraw docs.
Original commit message from CVS:
Lots of updates to the plugins for caps negotiation.
Added YUY2 output to the win32 dlls.
Added a colorspace converter in gstplay
Original commit message from CVS:
More work on capsnego proxying. It should be OK now.
Added another testcase enum that shows various capsnego algorithms.
Warn about pads that try to set a capability incompatible with their
padtemplate.
Implemented refcounting and copy_on_write for caps/props.
Original commit message from CVS:
Reworked the capsnegotiation function
audiosink now uses capsnego to set its parameters
mpg123/ac3dec use capsnego instead of metadata
Added the beginnings of a testsuite for capsnego.
Original commit message from CVS:
More doc updates
Manual additions: xml/load save of custom XML, debugging, request pads
added a signal to the example plugin
fixed a bug in mp3parse (ifdef 1)
Original commit message from CVS:
Reworked getregion/pullregion stuff. Region is now specified by a type
(OFFSET_LEN, TIME_LEN, etc.) and two guint64's. They are offset and len,
where offset can be used for the time field, and len would be zero or
the time unit (say, 33ms for video).
Original commit message from CVS:
This is a megapatch with the following changes:
- moved the gchar *name to GstObject, removed the ones in GstElement and
GstPad.
- moved the parent handling completely into GstObject. This cause *all* of
the plugins to fail (except those that used gst_pad_get_parent)
- rearanged the XML save handling.
- GstObject now has a class function save/restore_thyself.
- GstObject has a generic method gst_object_save_thyself, this makes it
possible to fire a signal wehever a new object is loaded. This is needed
so we can add XML save hooks.
- GstXML API has changed slightly. You now have to create a GstXML object
first before you can actually load something. This makes it possible to
attach a signal to GstXML whenever an object is loaded. I'm not sure we
will keep this interface.
- GstObject can now print the path_string without knowing about the GstPad and
GstElement types.
- Added gst_bin_get_by_name_recurse_up to lookup an element in the current
element hierarchy.
- added XML namespaces to the saved pipelines the namespace is:
http://gstreamer.net/gst-core/1.0/
namespaces are needed to distinguish user generated XML from the core XML.
Note that the plugins still contain a macro GST_OBJECT_PARENT that will be
replaced with gst_pad_get_parent shortly.
Original commit message from CVS:
Docs updates
Added XML load from memory functionality
Undid the videosink patch, something else is wrong now on my machine:
no MMX acceleration :-(
Original commit message from CVS:
Major cleanup of the latest ghostpad changes. Fixed everything that
broke, correctly. Someone will want to go update the API doc templates.
Original commit message from CVS:
First pass at updating to new ghostpad system. The objects are in place,
I now need to go and get all the Bin end of things worked out. Testing
should be fairly easy, at least for verification.
Everything I've tried so far works with no changes, with is amazing.
That's just cool. Once again we rewrite an entire subsystem, and nothing
else notices anything but the new features ;-)
Original commit message from CVS:
Added mthodes to request an element to create pads: gst_element_request_pad*
This can be used to construct a tee and a muxer/mixer/aggregator element.
Moved the tee element to elements/ because it can now be handled with the
new pad request features.
The padfactory also has some changes: a pad can now be of presence REQUEST,
which means that the pad can be requested from this plugin (doh).
Original commit message from CVS:
Massive build fixup. Will send message to -devel list later with details
on the changes and what they mean for Makefile.am writers. Check
docs/random/omega/build/TODO for a list of things that I had to make sure
of.
NOTE: this requires a complete rebuild of all plugins, since I also
changed the STATE enum to a bitfield instead of sequential numbers.
Original commit message from CVS:
Rearranged cothreads sources a bit, added some API docs.
Added some functions needed for gstreamer-inspect.
Added num_sources to fakesink.
Original commit message from CVS:
Started work on better ghostpad management, and started to build the low-
level EOS mechanism.
Also removed a couple of printouts that aren't needed any more.
Original commit message from CVS:
Added multiple caps to the pads
Extended the padfactory for the multiple caps
GstCaps now have a name so that future manipulations on them can be done by name
Updated the plugins for the new caps list
Original commit message from CVS:
Massive scheduling changes (again). Not entirely complete, but getting
closer. Need to think about various scheduling plans that we might want
to produce, and figure out the rules for what is legal, and how to get
the results we need as far as the plan.
Original commit message from CVS:
WARNING: Don't grab this updated unless you're really, REALLY sure.
WARNING: Wait for the next one.
Whole lotta changes here, including a few random bits:
examples/*/Makefile: updated to use `libtool gcc`, not just `gcc`
gst/
gstbuffer.h: updated to new flag style
gst.c, gstdebug.h: added new debugging for function ptrs
gstpipeline.c: set type of parent_class to the class, not the object
gstthread.c: ditto
plugins/
cdparanoia/cdparanoia.c: added an argument type, updated some defaults
cobin/spindentity.c: updated to new do/while loopfunction style
mp3encode/lame/gstlame.c: argument types, whole lotta lame options
tests/: various changes
Now, for the big changes: Once again, the scheduling system has changed.
And once again, it broke a whole bunch of things. The gist of the change
is that there is now a function pointer for gst_pad_push and gst_pad_pull,
instead of a hard-wired function. Well, currently they are functions, but
that's for debugging purposes only, they just call the function pointer
after spewing lots of DEBUG().
This changed the GstPad structure a bit, and the GstPad API as well.
Where elements used to provide chain() and pull() functions, they provide
chain() and get() functions. gst_pad_set_pull[region]_function has been
changed to get_pad_set_get[region]_function. This means all the elements
out there that used to have pull functions need to be updated. The calls
to that function have been changed in the normal elements, but the names
of the functions passed is still _pull[region](), which is an aesthetic
issue more than anything.
As for what doesn't work yet, just about anything dealing with Connections
is hosed, meaning threaded stuff won't work. This will be fixed about 12
hours from now, after I've slept, etc. The simplefake.c test works in
both cothreaded and chained cases, but not much else will work due to the
Connection problem. Needless to say, don't grab this unless you *need*
these features *now*, else wait to update this stuff until tomorrow.
I'm going to sleep now.
Original commit message from CVS:
Header cleanup: try to include as little as possible; this will probably
speed up compilation a bit.
changed the .c files to use #include "..."
Fix for the 'plugins are loaded twice' bug.
Fix 22186: GstObject flags are now used everywhere. Added *_FLAG_LAST so
elements do not use the same flags. Added some padding in the flag enum
for future expansion.
Original commit message from CVS:
Changed the GstPadFactory and added the GstPadTemplate.
The GstPadFactory is an easy way to define a pad with capabilities.
The GstPadFactory is converted into a GstPadTemplate. The template is
used to create new pads and to expose the possible pads used in an
element to the plugin system.
updated mp3parse, mpg123, cdparanoia to the new API.
Rerun gstreamer-register because the XML definition has changed.
Original commit message from CVS:
More Caps changes, this change introduces the padfactory. the GstPadFactory
will be used to describe the pads that an element will contain during
its lifetime.
mpg123 and mp3parse serve as an example.
More XML changes to incorporate the padfactories.
Original commit message from CVS:
First attempt at rebuilding the type/plugin system
- make sure caps/props are saved in the registry
autoplugging is completely broken.
removed the typefactories and typeids from all the pads in the plugins
XML load/save is ok (be sure to rerun gstreamer-register)
Original commit message from CVS:
Snapshot of work-in-progress do deal with out-of-bin elements. Current
system is very likely going to be ditched due to its complexity and the
fact that it doesn't work right now. More than that, it's generating some
really odd results in my test program, which aren't readily explainable.
If you want to keep a working copy of your working copy (heh), don't update
until this is replaced with a hybrid approach. This approach will be the
beginning of a plan generator that can construct full hybrid schedules
given hints from various places.
Hybrid means that cothreads are used, but there are chunks of the pipeline
that are actually dealt with by chaining. This can improve speed by
reducing cothread switches (which are much cheaper than thread switches,
but still far from free, about 570 cycles on my PIII), but does carry a
complexity burden. Luckily, the structure of GStreamer allows that burden
to live entirely in create_plan. Luck? I think not ;-)
