The Wayland sub-surfaces API is used to embed the video into an application
window.
See Appendix A. Wayland Protocol Specification as the following.
"""
The aim of sub-surfaces is to offload some of the compositing work
within a window from clients to the compositor. A prime example is
a video player with decorations and video in separate wl_surface
objects.
This should allow the compositor to pass YUV video buffer processing to
dedicated overlay hardware when possible.
"""
Added new method gst_vaapi_window_wayland_new_with_surface()
Original-Patch-By: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Zhao Halley <halley.zhao@intel.com>
changzhix.wei@intel.com
Hyunjun Ko <zzoon@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/342>
Some context does not report any valid format that we can support.
For example, the HEVC 444 12 bits decoder context, all the formats
it reports is not supported now, which make the formats list a NULL
array. We should check that pointer before we use it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/372>
In h265, bigger profile idc may not be compatible with the small profile
idc. And more important, there are multi profiles with the same profile
idc. Such as main-422-10, main-444 and main-444-10, they all have profile
idc 4.
So recording the max profile idc is not enough, the encoder needs to know
all allowed profiles when deciding the real profile.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/349>
In h265, higher profile idc number does not mean better compression
performance and may be not compatible with the lower profile idc.
So, it is not suitable to find the heighest idc for hw to ensure the
compatibility.
On the other side, when the entrypoint of the selected profile is valid,
it means the hw really support this profile, no need to check it again.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/349>
Instead of generating allowed srcpad caps with generic information,
now it takes the size an formats limits from the decoder's context.
This is possible since srcpad caps are generated after the internal
decoder is created.
The patch replaces gst_vaapi_decoder_get_surface_formats() with
gst_vaapi_decoder_get_suface_attributes().
From these attributes, formats are only used for VASurface memory
caps feature. For system memory caps feature, the old
gst_vaapi_plugin_get_allowed_srcpad_caps() is still used, since
i965 jpeg decoder cannot deliver mappable format for gstreamer.
And for the other caps features (dmabuf and texture upload) the
same static list are used.
This patch also adds DMABuf caps feature only if the context
supports that memory type. Nonetheless, we keep the pre-defined
formats since they are the subset of common derive formats formats
supported either by amd/gallium and both intel drivers, since,
when exporting the fd through vaAcquireBufferHandle()/
vaReleaseBufferHandle(), the formats of the derivable image cannot
be retriebable from the driver. Later we'll use the attribute
formats for the DMABuf feature too, when the code be ported to
vaExportSurfaceHandle().
Finally, the allowed srcpad caps are removed if the internal decoder
is destroyed, since context attribues will change.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/366>
Currently vaGetSurfaceBufferWl() is used to create wayland buffers.
Unfortunately this is not implemented by the 'media-driver' and Mesa VA-API
drivers. And the implementation provided by 'intel-vaapi-driver' is not
compatible with a Wayland server that uses the iris Mesa driver.
So create the Wayland buffers manually with the zwp_linux_dmabuf_v1 wayland
protocol. Formats and modifiers supported by the Wayland server are taken
into account. If necessary, VPP is enabled to convert the buffer into a
supported format.
Fall back to vaGetSurfaceBufferWl() if creating buffers via dambuf protocol
fails.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/346>
Committing the first buffer for a surface must not be done before
ack_configure() has been sent for the xdg_surface.
With weston, the commit will fail with "error 3: xdg_surface has never been
configured".
Wait in gst_vaapi_window_wayland_show() until configure is done to avoid
this.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/346>
The double reference lists may be required by drivers and there should
be no P frames in the of stream. The old way of converting P frames to
B frames is by setting `low-delay-b` property, which is unconvenient
and has bad user experience, since most of the users do not know when
to set this property, and if it is not set correctly, the encoding
pipeline fails or even hangs on some platforms. VA driver now provides
a attribute to query whether both reference lists must be un-NULL for
a profile/entrypoint pair.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/284>
In HEVC, P and B definitions are different from AVC: P frames have
just one reference list and so 1 MV, while B frames have two reference
lists and so 2 MVs. No matter B or P, ist reference lists can contain
forward/backward reference. So P and B can both have bi-directions
dependency, the difference is just their reference list
number (i.e. MV number). This is different from the AVC.
The *low delay b mode* refers to a special HEVC mode, in which the
stream just contain I and B frames, without P frames, and all B frames
only have forward direction dependencies (i.e. all inter frames have 2
reference lists but no backward reference in both lists). This is
similar to AVC I/P mode, but changing the P to the forward dependent
B.
The `low-delay-b` property is now just used to simply convert all P
frames to B frames when driver does not support P frames (so both
reference lists have the same references frames). This is a little
different from the meaning of low delay b mode (the two ref lists may
have the different reference frames). And the driver now can report
whether it supports P frames correctly, so there is no need to use
this property and deprecate it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/284>
The vaCreateContext do not need to specify the surfaces for the
context creation now. So we do not need to bind any surface to the
context anymore. Surfaces should be the resource belong to display
and just be used in encoder/decoder context.
The previous manner has big limitation for decoder. The context's
surface number is decided by dpb size. All the surfaces in dpb will
be attached to a gstbuffer and be pushed to down stream, and the
decoder need to wait down stream free the surface and go on if not
enough surface available. For more and more use cases, this causes
deadlock. For example,
gst-launch-1.0 filesrc location=a.h264 ! h264parse ! vaapih264dec
! x264enc ! filesink location=./output.h264
will cause deadlock and make the whole pipeline hang.
the x264enc encoder need to cache more than dpb size surfaces.
The best solution is seperating the surfaces number and the dpb size.
dpb and dpb size shoule be virtual concepts maintained by the decoder.
And let the surfaces_pool in context maintain the re-use of all surfaces.
For encoder, the situation is better, all the surfaces are just used
as reference frame and no need to be pushed to down stream. We can
just reserve and set the capacity of the surfaces_pool to meet the
request.
Fix: #147Fix: #88
Co-Author: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/353>
Registering only stream's DBP size number of surfaces for decoding VA
surfaces brings issues for certain streams. This change register all
possible number of reference surfaces in a stream, which is 16.
Fixes: #94
The h265 encoder just support tune mode:
(0): none - None
(3): low-power - Low power mode
So, no need to check and set the high compression parameters.
And by the way, the current ensure_tuning_high_compression manner
of choosing the hightest profile idc as the best compression profile
is not correct. Unlike h264, in h265 the higher profile idc number
does not mean it has more compression tools, and so it has better
compression performance. It may even be un-compatible with the lower
profile idc. For example, the SCREEN_CONTENT_CODING profile with idc
9 is not compatible with 3D_MAIN profile with idc 8.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/348>
Right now, all outputs are handled. The means that the registry object for
all but the last are leaked. As a result the sizes are not used correctly.
With two outputs, at first the mode and physical size of the second output
are used. If the first output changes the mode, then the physical size of
the second output is used in combination with the resolution of the first
output. The resulting pixel aspect ratio is incorrect.
There seems to be no way to determine on which output the window is shown,
so just use the first one to get consistent results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/341>
These properties are used for support of tile encoding. We just
support uniform mode of tile encoding, that is, separating picture
equally by (num-tile-cols X num-tile-rows).
According to HEVC spec A1, the max number of tiles in column is 20
and in rows is 22, so add two constant definitions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/294>
We need to use the chroma_format_idc as the index for getting the
SubWidthC and SubHeightC values as the spec 6.1(table 6-1) defines.
The wrong SubWidthC or SubHeightC make us calculate a wrong right
or bottom offset for crop size and generate garbage in output.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/merge_requests/334>
