Try to allocate the GstVaapiUploader helper object prior to listing the
supported image formats. Otherwise, only a single generic caps is output
with no particular pixel format referenced in there.
Use GstVaapiUploader helper that automatically handles direct rendering
mode, thus making the "direct-rendering" property obsolete and hence it
is now removed.
The "direct-rendering" level 2, i.e. exposing VA surface buffers, was never
really well supported and it could actually trigger degraded performance.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Make vaapisink expose only the set of supported caps for raw YUV buffers.
Add gst_vaapi_uploader_get_caps() helper function to determine the set
of supported YUV caps as source (for images). This function actually
tries to zero and upload each image to a 64x64 test surface. Of course,
this relies on VA drivers to not claim success if vaPutImage() is not
correctly supported.
Add new GstVaapiUploader helper to upload raw YUV buffers to VA surfaces.
It is up to the caller to negotiate source caps (for images) and output
caps (for surfaces). gst_vaapi_uploader_has_direct_rendering() is available
to help decide between the creation of a GstVaapiVideoBuffer or a regular
GstBuffer on sink pads.
Signed-off-by: Zhao Halley <halley.zhao@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix gst_vaapi_image_map() to return TRUE and the GstVaapiImageRaw
structure correctly filled in if the image was already mapped.
Likewise, make gst_vaapi_image_unmap() return TRUE if the image
was already unmapped.
Fix reference leak of surface and image in GstVaapiVideoBuffer wrapper,
thus resulting on actual memory leak of GstVaapiImage when using them
for downloads/uploads from VA surfaces and more specifically surfaces
when the pipeline is shutdown. i.e. vaTerminate() was never called
because the resources were not unreferenced, and thus not deallocated
in the end.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The picture size signalled by sps->{width,height} is the actual size with
cropping applied, not the original size derived from pic_width_in_mbs_minus1
and pic_height_in_map_units_minus1. VA driver expects that original size,
uncropped.
There is another issue pending: frame cropping information needs to be
taken care of.
Fix commit 18245b4 so that to link and build parserutils.[ch] first.
This is needed since that's the common dependency for actual codec
parsers (gstvc1parser.c for instance).
... this is useful to make sure pixel-aspect-ratio and framerate
information are correctly parsed since we have no means to detect
that at configure time.
Invoke gst_mpeg_video_finalise_mpeg2_sequence_header() to get the
correct PAR values. While doing so, require a newer version of the
bitstream parser library.
Note: it may be necessary to also parse the Sequence_Display_Extension()
header.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
This patch updates to relect the 1.0 version of the protocol. The main
changes are the switch to wl_registry for global object notifications
and the way that the event queue and file descriptor is processed.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
git am got confused somehow, though the end result doesn't change at
all since we require both SPS and PPS to be parsed prior to decoding
the first slice.
Only start decoding slices when at least one SPS and PPS got activated.
This fixes cases when a source represents a substream of another stream
and no SPS and PPS was inserted before the first slice of the generated
substream.
... for interlaced streams. The short_ref[] and long_ref[] arrays may
contain up to 32 fields but VA ReferenceFrames[] array expects up to
16 reference frames, thus including both fields.
Fix decoding of interlaced streams when adaptive_ref_pic_marking_mode_flag
is equal to 1, i.e. when memory management control operations are used. In
particular, when field_pic_flag is set to 0, the new reference flags shall
be applied to both fields.
Decoded frames are only output when they are complete, i.e. when both
fields are decoded. This also means that the "interlaced" caps is not
propagated to vaapipostproc or vaapisink elements. Another limitation
is that interlaced bitstreams with MMCO are unlikely to work.
Split remove_reference_at() into a function that actually removes the
specified entry from the short-term or long-term reference picture array,
and a function that sets reference flags to the desired value, possibly
zero. The latters marks the picture as "unused for reference".
Fix gst_vaapi_picture_new_field() to preserve the original picture type.
e.g. gst_vaapi_picture_new_field() with a GstVaapiPictureH264 argument
shall generate a GstVaapiPictureH264 object.
Introduce new `structure' field to the H.264 specific picture structure
so that to simplify the reference picture marking process. That local
picture structure is derived from the original picture structure, as
defined by the syntax elements field_pic_flag and bottom_field_flag.
Move DPB flush up if the current picture to decode is an IDR. Besides,
don't bother to check for IDR pictures in dpb_add() function since an
explicit DPB flush was already performed in this case.
... to build the short_ref[] and long_ref[] lists from the DPB, instead
of maintaining them separately. This avoids refs/unrefs while making it
possible to generate the list based on the actual picture structure.
This also ensures that the list of generated ReferenceFrames[] actually
matches what reference frames are available in the DPB. i.e. short_ref[]
and long_ref[] entries are implied from the DPB, so there is no risk of
having "dangling" references.
Use the POC member available in the GstVaapiPicture base class and
get rid of the dependency on the local VAPictureH264 TopFieldOrderCnt
and BottomFieldOrderCnt. Rather, use a simple field_poc[] array
initialized to INT_MAX, so that to simplify picture POC calculation
for non frame pictures.
Further get rid of GstVaapiPictureH264-local VAPictureH264.flags for
reference bits, thus simplifying the reference picture marking process
to only track a single set of reference flags. Also introduce a new
long_term_frame_idx member.
Add vaapi_fill_picture() helper function to convert GstVaapiPictureH264
to VAPictureH264 structure. This is preparatory work to get rid of the
local VAPictureH264 member in GstVaapiPictureH264.
Delay ensure_context() until we actually need a VA context for allocating
new VA surfaces, and then GstVaapiPictures, but also when a real activation
of a new picture parameter set occurs, thus also implying an activation
of the related sequence parameter set.
The most important thing was to drop the global pps and sps pointers since
they may not have matched the currently activated picture parameter or
sequence parameter sets at the specified decode point.
Anoter positive side-effect is that this cleans up all occurrences of
decode_current_picture() to only keep those useful in decode_picture(),
before a new picture is allocated, or in decode_sequence_end() when
an end-of-stream or end-of-sequence condition occurred.
... aka fix regression from efaab79. In particular, ScalingList8x8[]
array was partially copied to the VAIQMatrixBufferH264. While we are
at it, also improve bounds checking and avoid copying 8x8 scaling
lists if transform_8x8_mode_flag is set to 0.
Don't copy scaling lists twice to an intermediate state. Rather, directly
use the scaling lists from GstH264PPS since they would match those provided
by SPS header, if necessary. i.e. if PPS-specific scaling lists are not
available in the bitstream.
Remove exit_picture() and exit_picture_poc() since PicOrderCnt(CurrPic)
is now updated accordingly to the standard. Besides, MMCO = 5 specific
operations are moved up to exec_ref_pic_marking_adaptive_mmco_5().
Fix adaptive memory control decoded reference picture marking process
implementation for operations 2 to 6, thus also fixing support for
long-term reference pictures.
This change only splits each individual MMCO handler into several functions
dedicated for each operation. This is needed to perform further work later
on.
bzip2 tarballs are now used, so update the deb.upstream dependencies
to include dist-bzip2 instead of plain old dist, and use the correct
tar extract options to handle that format.
The use of heap allocated GMutex/GCond is deprecated. Instead place them
inside the structure they are locking.
These changes switch to use g_mutex_init/g_cond_init rather than the heap
allocation functions.
Because we cannot test for a NULL pointer for the GMutex/GCond we must
initialise inside the GObject _init function and clear inside the _finalize
which is guaranteed to only be called once and after the object is no longer
in use.
Don't care of the return value for gst_vaapi_decoder_put_buffer()
during destruction of the element. Don't print out (uninitialised)
error code when allocation of video buffer failed.
Allow build with strict DPB ordering mode whereby evicted entries
are replaced by the next entries, in order instead of optimizing
it away with the last entry in the DPB.
This is only useful for debugging purpose, against a reference SW
decoder for example.
GstH264SliceHdr.n_emulation_prevention_bytes is bound to exist now that
a newer version of codecparsers/ are used if the system provided one is
now recent enough to have those required extensions.
Use newer sources from the codecparsers/ submodule for
- GstH264SliceHdr.n_emulation_prevention_bytes: EPBs;
- GstH264VUIParams.{par_n,par_d}: pixel-aspect-ratio.
