Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_init), (gst_udpsrc_create):
Make udpsrc timestamp outgoing buffers based on when they were received.
Also make it output a segment in time.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_set_property),
(gst_multiudpsink_get_property), (gst_multiudpsink_init_send),
(gst_multiudpsink_close), (gst_multiudpsink_add):
* gst/udp/gstmultiudpsink.h:
Add support for getting and setting the socket to use.
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_get_property):
Add support for getting the currently used socket.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Improve UDP performance by avoiding a select() when we have data
available immediatly.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create), (gst_udpsrc_unlock), (gst_udpsrc_unlock_stop):
Since we depend on 0.10.13 -core, override the unlock_stop vmethod for
safer shutdown.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (leave_multicast),
(gst_multiudpsink_add), (gst_multiudpsink_remove):
Add code to drop membership of a multicast group.
* gst/udp/gstudpsink.c: (gst_udpsink_update_uri),
(gst_udpsink_set_uri):
Implement URI handler.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_parse_rtpinfo):
Use URI handler to make udpsink instace.
Improve code to configure port and destination.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_add):
Fix multicast detection.
Don't try to join a multicast group if the address is not multicast.
* gst/udp/gstudpsrc.c: (gst_udpsrc_update_uri):
Small debug improvement.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Handle the case where there are exactly 0 bytes to read and the ioctl
did not report an error. Fixes#433530.
Original commit message from CVS:
* gst/udp/gstudp.c: (plugin_init):
Register GstNetBuffer in plugin_init so that the type can be used from
multiple threads without races.
Original commit message from CVS:
Patch by: Laurent Glayal <spglegle at yahoo dot fr>
* gst/udp/gstdynudpsink.c: (gst_dynudpsink_class_init),
(gst_dynudpsink_init), (gst_dynudpsink_set_property),
(gst_dynudpsink_get_property), (gst_dynudpsink_init_send),
(gst_dynudpsink_close):
* gst/udp/gstdynudpsink.h:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Rework the socket allocation a bit based on the sockfd argument so that
it becomes usable.
Add a closefd property to instruct the udp elements to close the custom
file descriptors when going to READY. Fixes#423304.
API:GstUDPSrc::closefd property
API:GstDynUDPSink::closefd property
Original commit message from CVS:
* gst/avi/gstavimux.c:
Comment a #if 0 in caps template definition as VS6 seems to
do not support it.
* gst/rtsp/gstrtspsrc.c:(gst_rtspsrc_loop_udp):
Use gst_guint64_to_gdouble for conversion.
* gst/rtsp/rtspconnection.c:(rtsp_connection_send):
Move variables declaration before the first instruction.
* gst/rtsp/rtspdefs.c:(rtsp_strresult):
Don't use hstrerror for error log on G_OS_WIN32 build as it's not supported.
And don't include netdb.h for G_OS_WIN32
* gst/rtsp/sdpmessage.c:(sdp_parse_line):
This initialization SDPMedia nmedia = {.media = NULL }; is not supported
by VS6 then use an other way to initialize SDPMedia structure.
* gst/udp/gstdynudpsink.h:
* gst/udp/gstdynudpnetutils.h:
Do not include <sys/time.h> for G_OS_WIN32
* gst/udp/gstudpsrc.c:
Define socklen_t as int for G_OS_WIN32
* win/common/config.h.in:
Undef HAVE_NETINET_IN_H
* win32/vs6/gst_plugins_good.dsw:
* win32/vs6/libgstrtp.dsp:
* win32/vs6/libgstrtsp.dsp:
* win32/vs6/libgstautogen.dsp:
* win32/vs6/libgstaudiofx.dsp:
* win32/vs6/libgstudp.dsp:
Add and update project files.
* win32/common/gstudp-enumtypes.c:
* win32/common/gstudp-enumtypes.h:
Add a copy of udp enumtypes to win32/common as in core
and base.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* ext/jpeg/gstjpegdec.c:
* ext/jpeg/gstjpegenc.c:
* ext/jpeg/smokecodec.c:
These libjpeg callbacks should return a 'boolean' (unsigned char
apparently) and not a 'gboolean' (which maps to gint). Fixes
warnings when compiling with MingW (#393427).
* gst/rtsp/rtspconnection.c: (rtsp_connection_read):
Use ioctlsocket on win32.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Some printf format fixes for win32.
Original commit message from CVS:
Patch by: Rob Taylor <robtaylor at floopily dot org>
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
If using multicast in udpsrc, bind to the multicast address rather than
IN_ADDR_ANY.
This allows the simultanous use of multiple udpsrcs listening on
different multicat addresses. Without this all udpsrcs will receive all
packets from all subscribed multicast addresses.
Fixes#383001.
Original commit message from CVS:
Patch by: Sebastien Cote <sebas642 at yahoo dot ca>
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_finalize), (gst_udpsrc_create), (gst_udpsrc_set_uri),
(gst_udpsrc_start):
Fix some leaks in caps and uris. Fixes#361252.
Original commit message from CVS:
* gst/rtsp/URLS:
Add some more URLs.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_class_init),
(gst_rtspsrc_init), (gst_rtspsrc_finalize),
(gst_rtspsrc_set_property), (gst_rtspsrc_get_property),
(gst_rtspsrc_stream_setup_rtp), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_loop_udp), (gst_rtspsrc_loop_send_cmd),
(gst_rtspsrc_loop), (gst_rtspsrc_send),
(gst_rtspsrc_parse_methods), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play), (gst_rtspsrc_pause),
(gst_rtspsrc_handle_message), (gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
Add timeout property to control UDP timeouts.
Fix error messages.
Also start a loop function when operating in UDP mode so that we can
do some more stuff async.
Handle element messages from udpsrc to detect timeouts. If a timeout
happens we currently generate an error.
API: rtspsrc::timeout property.
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create):
Really implement the timeout in microseconds and not milliseconds.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_unlock), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Added property to post a message on timeout.
Updated docs.
When restarting the select, initialize the fdsets again.
Init control sockets so we don't accidentally close a random socket.
API: GstUDPSrc::timeout property
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Fix possible infinite loop when shutting down, a read can also return
0 to indicate no more messages are available. Fixes#358156.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/alpha/gstalpha.c:
* gst/rtp/gstrtpamrdepay.c:
* gst/rtsp/gstrtspsrc.c:
* gst/udp/gstudpsrc.c:
* gst/videomixer/videomixer.c:
Include stdlib.h in some more places, makes things compile
with uClibc and -Werror (#357592).
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_set_property), (gst_udpsrc_get_property),
(gst_udpsrc_start):
* gst/udp/gstudpsrc.h:
Rename "buffer" to "buffer-size" to make clear it is a size we set and
not some sort of feature we enable.
Original commit message from CVS:
Patch by: Rob Taylor <robtaylor at floopily dot org>
* gst/udp/gstmultiudpsink.c: (join_multicast),
(gst_multiudpsink_init_send), (gst_multiudpsink_add):
If a destination is added before the stream is set to PAUSED, the
multicast group is not joined as the socket is not created yet.
Also TTL and LOOP should also be set. Fixes#346921.
Original commit message from CVS:
2005-01-07 Philippe Khalaf <philippe.kalaf@collabora.co.uk>
* gst-plugins-good/gst/udp/gstdynudpsink.c:
* gst-plugins-good/gst/udp/gstudpsrc.c:
Allow udpsrc and dynudpsink to take a sockfd as a parameter. For udpsrc,
overrides the port or multicast parameters. Fixes bugs #323021.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_render),
(gst_multiudpsink_remove), (gst_multiudpsink_get_stats):
* gst/udp/gstmultiudpsink.h:
Track packets sent per client in addition to bytes sent; provide
this info through get-stats signal
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_render),
(gst_multiudpsink_add), (gst_multiudpsink_remove),
(gst_multiudpsink_get_stats):
* gst/udp/gstmultiudpsink.h:
Collect statistics; return them from get_stats.
Original commit message from CVS:
* ext/raw1394/gstdv1394src.c: (gst_dv1394src_class_init),
(gst_dv1394src_init), (gst_dv1394src_dispose),
(gst_dv1394src_set_property), (gst_dv1394src_discover_avc_node),
(gst_dv1394src_uri_set_uri):
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_update_uri), (gst_udpsrc_set_uri),
(gst_udpsrc_set_property), (gst_udpsrc_uri_get_uri):
URIHandler interface and element properties are now properly
synchronized for DV1394src and UDPSrc
