Commit graph

179 commits

Author SHA1 Message Date
Mark Nauwelaerts
60d5d08fbb decodebin2: tweak chain topology description
... to also properly indicate chain's endpad if no elements are in the
chain (due to the endpad being a raw demuxer pad, or one setup without
decoders since uridecodebin or higher up decided not to need those).
2011-12-14 17:53:38 +01:00
Tim-Philipp Müller
5440ae3c18 Suppress deprecation warnings in selected files, for g_static_rec_mutex_* mostly
GStaticRecMutex is part of our API/ABI, not much we can do here
in 0.10 for most of these.
2011-12-04 20:50:25 +00:00
Tim-Philipp Müller
0d98aa25b8 Work around deprecated thread API in glib master
Add private replacements for deprecated functions such as
g_mutex_new(), g_mutex_free(), g_cond_new() etc., mostly
to avoid the deprecation warnings. We'll change these
over to the new API once we depend on glib >= 2.32.

Replace g_thread_create() with g_thread_try_new().
2011-12-04 17:16:30 +00:00
Piotr Fusik
14644457b0 various: typo fixes
Fix typos in code and docs. Fixes. #658984
2011-12-02 12:03:27 +01:00
Vincent Penquerc'h
96374054ac various: fix pad template leaks
https://bugzilla.gnome.org/show_bug.cgi?id=662664
2011-11-28 13:09:02 +00:00
Sebastian Dröge
a5535e76e0 decodebin2: Set the multiqueue limits to the playing limits after overrun too
We don't expect any new pads anymore and prerolling is finished now.
2011-11-25 11:12:10 +01:00
Sebastian Dröge
494b2cb1a7 decodebin2: Cache the upstream seekability for demuxer decode chains and use it for the non-preroll multiqueue limits
After preroll the multiqueue limits are still set to the preroll
limits if use-buffering is set to TRUE. In that case we only want
time limits on the multiqueue if upstream is seekable.
2011-11-25 11:12:10 +01:00
Vincent Penquerc'h
59f5d980f6 decodebin2: fix prerolling for low bitrate streams from hlsdemux
Such streams were detected as seekable, as the query on the typefind
element was testing the m3u8 file listing the actual streams, and
not going through the demuxer(s).

We now check for seekability for each multiqueue following a demuxer,
so the query will flow through the elements which might prevent seeking.

https://bugzilla.gnome.org/show_bug.cgi?id=647769
2011-11-25 11:12:10 +01:00
Mart Raudsepp
5c58bcfd15 decodebin2: Post all source pads in stream-topology messages as "element-srcpad" values
This allows us to easily get ahold of all pads on a stream-topology message, including
pre-decoder ones, while "pad" only gives us access to the raw pads (as used by discoverer).
2011-11-03 14:41:08 +01:00
Mart Raudsepp
cee8710817 decodebin2: Use existing "caps" quark for one of the structure sets 2011-11-03 14:40:51 +01:00
Nicolas Dufresne
cf9da5c280 decodebin2: Link elements before testing if they can reach the READY state
This is made possible by filtering errors. This is required to let
harware accelerated element query the video context. The video context
is used to determine if the HW is capable, and thus if the element is
supported or not.

Fixes bug #662330.
2011-10-22 08:27:31 +02:00
Vincent Penquerc'h
5e9862b2ba decodebin2: fire drained signal where appropriate
This will allow playbin2 to send its about-to-finish signal.
Taken out (apparently by mistake) by the EOS rewrite in july.

https://bugzilla.gnome.org/show_bug.cgi?id=661202
2011-10-17 15:36:25 +02:00
Sebastian Dröge
9117681b35 decodebin2: Use a TIME limit for pre-rolling in live streams and not in non-live streams
Fixes bug #647769 for real.
2011-10-03 10:55:53 +02:00
Sebastian Dröge
61c6fcb2cd decodebin2: Only check if this is a discarded type if we have fixed caps
For unfixed caps we will get here again later when the caps are fixed.
2011-09-20 14:06:51 +02:00
Sebastian Dröge
8e114c427a decodebin2: Only call autoplug-continue with fixed caps
With unfixed caps we can't reliably decide if the final caps
are going to be "raw" (e.g. supported by a sink) or not.

We will get here again later when the caps are fixed.
2011-09-20 14:06:42 +02:00
Youness Alaoui
27058c1bc6 decodebin2: Initialize variable correctly
If subdrained isn't initialized to FALSE then a chain might think
that its group is drained when in fact it's not and this can cause
a switch too early or even cause a deadlock.
2011-09-19 12:36:48 +02:00
Edward Hervey
9d2bcb08fe decodebin2: Rewrite EOS-handling code
This is now really threadsafe and improves switching
between different groups.
2011-09-19 12:34:51 +02:00
Sebastian Dröge
936e87cdcf decodebin2: Fix non-prerolling pipelines and not-linked errors if a parser is available but no decoder
Fixes bug #658846.
2011-09-19 11:54:27 +02:00
Sebastian Dröge
5f5d832a3b Revert "decodebin2: Do a subset check before actually using a factory"
This reverts commit 50a88396ae.

See bug #658541.
2011-09-08 13:25:27 +02:00
Sebastian Dröge
9e2ce5bbb5 decodebin2: Make sure to fixate Parser/Converter caps before continuing autoplugging 2011-09-07 16:44:59 +02:00
Sebastian Dröge
46e26824d4 decodebin2: Intersect the factory caps with the current caps for the capsfilter
Otherwise we'll include many incompatible caps in the capsfilter that
will only slow down negotiation.
2011-09-07 14:20:36 +02:00
Tim-Philipp Müller
f93748fbd4 decodebin2: fix element factory refcounting
g_value_get_object() does not give us our own ref.

Fixes "Trying to dispose object "flacparse", but it still has a parent "registry0".
You need to let the parent manage the object instead of unreffing the object directly."
and similar warnings.

https://bugzilla.gnome.org/show_bug.cgi?id=658416
2011-09-07 12:34:06 +01:00
Sebastian Dröge
50a88396ae decodebin2: Do a subset check before actually using a factory
This prevents autoplugging if the caps have a non-empty intersection
but are not accepted by the next element's pad.
2011-09-06 14:16:10 +02:00
Sebastian Dröge
4be8c44b08 decodebin2: Fix memory leak 2011-09-06 13:16:44 +02:00
Sebastian Dröge
20f9d0bec5 decodebin2: Correctly negotiate format for parsers that can convert different stream formats
This is done by adding a capsfilter after every parser/converter that contains
all possible caps supported by downstream elements. A capsfilter is necessary
here because the decoder is only selected after the parser selected a format
and the parser can't know what downstream would support otherwise.
2011-09-06 13:16:44 +02:00
Sebastian Dröge
de4fc848fa decodebin2: Actually iterate over the factories instead of only taking the first one 2011-09-05 20:32:42 +02:00
Sebastian Dröge
425d3ae7bc decodebin2: Keep the chain mutex locked while connecting to the notify::caps signal 2011-08-31 12:40:30 +02:00
Edward Hervey
38a6919a7b decodebin2: Allow all EOS to go through if we don't have a next group
Only drop them if the current group isn't drained .. AND there is a
next group to switch to.

Should Fix #655268
2011-07-26 12:33:56 +02:00
Edward Hervey
c91928f7a2 decodebin2: Properly handle multi-stream chains
When we have a multi-stream (i.e. audio and video) input and the demuxer
adds/removes pads for a new stream (common in a mpeg-ts stream when the
program stream mapping is updated), the algorithm for EOS handling was
previously wrong (it would only drop the EOS of the *last* pad but would
let the EOS on the other pads go through).

The logic has only been changed a tiny bit for EOS handling resulting in:
* If there is no next group, let the EOS go through
* If there is a next group, but not all pads are drained in the active
  group, drop the EOS event
* If there is a next group and all pads are drained, then the ghostpads
  will be removed and the EOS event will be dropped automatically.
2011-07-25 10:45:36 +02:00
Andoni Morales Alastruey
dd36e4cd0e decodebin2: fix preroll for streams at low bitrates
For streams at low bitrates we need to set a limit in time because the limit
in bytes might not reached too late, sometimes more than 30 seconds.
This limit can only be set if upstream is seekable (see #584104)
Closes #647769
2011-05-14 11:42:33 +02:00
Stefan Kost
63be375c21 plaback: trim trailing whitespace 2011-03-14 10:43:42 +02:00
Stefan Kost
7f1382112e decodebin2: reflow configuring new multiqueue instance
Use a single g_object_set to configure the new multiqueue instance. Also don't
needlessly set "use-buffering" if it is the default.
2011-03-14 10:43:42 +02:00
Sebastian Dröge
4ac6f5ff83 decodebin2: Only prevent to autoplug the same parser multiple times for the same chain
Parsers are the only element class that are not changing the data and
could lead to an infinite loop. Other element classes like demuxers,
e.g. id3demux, can be used multiple times in a row and sometimes are.
2011-02-27 09:32:55 +01:00
Sebastian Dröge
c7f5290247 decodebin2: Break the double-factory checking loop immediately if the factory was used already 2011-02-26 23:43:39 +01:00
Sebastian Dröge
5058f79226 decodebin2: Don't use the same element multiple times in the same chain
This is going to lead to an infinite loop of this element and can easily
happen with parsers that accept their own src caps on the sinkpad.
2011-02-26 23:40:48 +01:00
Sebastian Dröge
32c30b88ff decodebin2: Improve detection of raw caps in expose-all-streams=false mode
Previously we only checked against the raw caps but we should also
check against the return value of autoplug-continue. Additionally fix
a thread-safety issue with accessing the raw caps.
2011-02-26 23:24:11 +01:00
Sebastian Dröge
2a6602d994 decodebin2: Return NULL from the default autoplug-sort handler
...instead of copying the array. Returning NULL will result
in the original factories array to be used and prevents a useless
array copy in most use cases.
2011-02-18 12:01:05 +01:00
Sebastian Dröge
ef5f73206d decodebin2: Update documentation of the autoplug-* signals
Add notes about the behaviour if multiple signal handlers are connected.
For most autoplug-* signals only the first signal handler will ever
be invoked.

Also add to the autoplug-sort docs that the signal handler can return NULL
to specify that the order should change and other handlers get the chance
to sort the array.
2011-02-18 11:58:44 +01:00
Sebastian Dröge
785f35a48e decodebin2: Keep the original factory list if the sort signal handlers returned NULL 2011-02-18 11:57:12 +01:00
Sebastian Dröge
6ca5bb72a4 decodebin2: Disconnect signal handlers when removing a failed element
This prevents crashes later if one of the signals is emitted after the
element was removed from decodebin2 already, which can happen in discoverer.
2011-02-18 09:44:49 +01:00
Sebastian Dröge
fbf9729795 decodebin2: Don't leak elements that fail to go to PAUSED after being autoplugged
Fixes bug #642381.
2011-02-15 17:05:42 +01:00
Stefan Kost
fe59f50468 decodebin2: caps can be NULL
Don't use and unref NULL caps.
2011-02-08 12:32:23 +02:00
Stefan Kost
69436bb8a6 decodebin2: add comment and whitespace trimming 2011-01-25 18:03:58 +02:00
Sebastian Dröge
09ff04a00a decodebin2: Deprecate new-decoded-pad and removed-decoded-pad signals
They're really the same as pad-added and pad-removed from GstElement
and it doesn't make sense to have two signals for the same thing.
2010-12-11 17:18:49 +01:00
Sebastian Dröge
42dee942d4 decodebin2: Emit "remove-decoded-pad" signal when pads are removed from decodebin2
Fixes bug #636198.
2010-12-11 17:15:28 +01:00
Tim-Philipp Müller
1bfefc50af docs: improve decodebin2 docs a little
Mention that new pads may be created even after no-more-pads.

https://bugzilla.gnome.org/show_bug.cgi?id=634584
2010-11-22 00:54:35 +00:00
Harri Mähönen
7c5e39664e *decodebin*: don't leak pad templates set on ghostpads
https://bugzilla.gnome.org/show_bug.cgi?id=635067
2010-11-18 00:11:41 +00:00
Edward Hervey
a5752d8ea7 decodebin2: Don't add non prerolled stream to topology
If a final stream didn't preroll, don't add it to the topology since
it doesn't give any information at all.

https://bugzilla.gnome.org/show_bug.cgi?id=632988
2010-10-24 16:18:17 +02:00
Stefan Kost
2a00fefd2a *decodebin*: set pad-templates on ghostpads
This makes calling gst_pad_get_pad_template() work.
2010-10-13 23:30:55 +03:00
Tim-Philipp Müller
8d29594491 decodebin2: declare decodebin2 stable, deprecate the old decodebin
https://bugzilla.gnome.org/show_bug.cgi?id=624949
2010-10-13 13:05:12 +01:00