This patch enables matroskademux to receive seeks before it reaches
GST_MATROSKA_READ_STATE_DATA.
Closes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/issues/514
This also enables receiving seeks in the element READY state.
When such a seek is received, it is stored to be later handled when
GST_MATROSKA_READ_STATE_DATA is reached.
This commit:
1. Reads the WebM and Matroska ContentEncryption subelements.
2. Creates a GST_PROTECTION event for each ContentEncryption, which
will be sent before pushing the first source buffer.
The DRM system id field in this event is set to GST_PROTECTION_UNSPECIFIED_SYSTEM_ID,
because it isn't specified neither by Matroska nor by the WebM spec.
3. Reads the protection information of encrypted Block/SimpleBlock and
extracts the IV and the partitioning format (subsamples).
4. Creates the metadata protection for each encrypted Block/SimpleBlock,
with those informations: KeyID (extracted from ContentEncryption element),
IV and partitioning format.
5. Adds a new caps for WebM encrypted content named "application/x-webm-enc",
with the following new fields:
"encryption-algorithm": The encryption algorithm used.
values: "None", "DES", "3DES", "Twofish", "Blowfish", "AES".
"encoding-scope": The field that describes which Elements have been modified.
Values: "frame", "codec-data", "next-content".
"cipher-mode": The cipher mode used in the encryption.
Values: "None", "CTR".
https://bugzilla.gnome.org/show_bug.cgi?id=765275
Currently matroskademux does not emit no-more-pads until the first
Cluster is parsed, even though the Tracks have already been parsed and
from that point on there can be no more tracks.
This is important in MSE because the browser needs to know when the MSE
initialization segment has been completely parsed so that it can expose
the tracks to the user. Some applications depend on this been done
before they feed frames to the demuxer.
As a consequence, historically WebKit has relied on hacks such as
listening to the `pad-added` event, which made impossible to support
multiple tracks in the same file. Let's fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=797187
This patch allows matroskademux to parse a second Tracks element,
erroring out if the tracks are not compatible (different number, type or
codec) and emitting new caps and tag events should they have changed.
https://bugzilla.gnome.org/show_bug.cgi?id=793333
This splits gst_matroska_demux_add_stream() into:
* gst_matroska_demux_parse_stream(): will read the Matroska bytestream
and fill a GstMatroskaTrackContext.
* gst_matroska_demux_parse_tracks(): will check there are no repeated
tracks.
* gst_matroska_demux_add_stream(): creates and sets up the pad for the
track.
https://bugzilla.gnome.org/show_bug.cgi?id=793333
This is necessary for MSE, where a new MSE initialization segment may be
appended at any point. These MSE initialization segments consist of an
entire WebM file until the first Cluster element (not included). [1]
Note that track definitions are ignored on successive headers, they must
match, but this is not checked by matroskademux (look for
`(!demux->tracks_parsed)` in the code).
Source pads are not altered when the new headers are read.
This patch has been splitted from the original patch from eocanha in [2].
[1] https://www.w3.org/TR/mse-byte-stream-format-webm/
[2] https://bug334082.bugzilla-attachments.gnome.org/attachment.cgi?id=362212https://bugzilla.gnome.org/show_bug.cgi?id=793333
Currently, whenever we generate a 128-bit UID, we store it in a list and
return 0 if we ever encounter a collision. This is so mathematically
improbable that it's not worth checking for, so we can save memory and
time by not tracking the UID. Even if a collision happened, a list of
only 10 UIDs would be unlikely to detect it.
This article has a good description of how improbable a collision is:
https://en.wikipedia.org/wiki/Universally_unique_identifier#Collisionshttps://bugzilla.gnome.org/show_bug.cgi?id=797086
If we have cluster prev size (GStreamer muxer will write it by default),
we can go back to the previous cluster efficiently, but if we don't then
just search backwards until we find a cluster ebml identifier, like we
do when searching for clusters in the bisection loop.
Add property instead of hardcoding it in the code.
In some scenarios such as CCTV variable fps and extra long GOPs are
used to minimise storage space, for example. In those cases there might
not be any keyframes for many minutes, so provide a property to override
the max allowed distance.
https://bugzilla.gnome.org/show_bug.cgi?id=790696
When seeking in pull mode without an index (because there is no index
or the file is still being written to) we bisect to find the right
cluster to jump to. However, it's possible the cluster we found doesn't
start with a keyframe, which leads to decoding errors, so if we know
that the found cluster starts with a delta frame try to scan back to
previous clusters until we find one that starts with a keyframe or
we are back at the beginning. Theoretically it's possible that all
clusters but the first one do not start with a keyframe and the
keyframes are in the middle of clusters, but this is extremely
unusual, so we will cover this case with a basic sanity check.
This problem is especially problematic with content recorded with
dynamic GOP and FPS, where long GOP lengths and low FPS may cause a
large set of clusters to lack key frames. Playback would then be
started on a non-keyframe cluster, and the large number of such frames
would make the content impossible to decode fo a long stretch of time.
Based on patch by: Mats Lindestam <matslm@axis.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790696
This is useful for reverse playback/trickmodes
without an index, and will also be useful in the
seek handler if we need to scan back to find a cluster
that starts with a keyframe.
https://bugzilla.gnome.org/show_bug.cgi?id=790696
This is an enum not a boolean, and a value of 2 signals
that the video is progressive, but we would mistakenly set
interlace-mode=mixed on the output caps.
https://bugzilla.gnome.org/show_bug.cgi?id=787206
This is a straightforward translation of 5dd39d8, can be trivially
checked by running:
gst-launch-1.0 -v videotestsrc ! video/x-raw, colorimetry=2:4:7:1 ! \
matroskamux ! matroskademux ! fakesink
and verifying that the colorimetry is correctly preserved.
https://bugzilla.gnome.org/show_bug.cgi?id=796344
Only up to timescale * G_MAXINT16 is possible as cluster duration, which
is already higher than our default value. Using higher values would
cause overflows and broken files.
Based on the investigation by Nicola Murino <nicola.murino@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792775
Matroska does not support changing the stream type and stream properties
after the headers were started to be written, and for example H264
codec_data changes can't be supported.
https://bugzilla.gnome.org/show_bug.cgi?id=782949
TOC support in mastroskamux has been deactivated for a couple of years. This commit updates it to recent GstToc evolutions and introduces toc unit tests for both matroska-mux and matroska-demux.
There are two UIDs for Chapters in Matroska's specifications:
- The ChapterUID is a mandatory unsigned integer which internally refers to a given chapter. Except for title & language which use dedicated fields, this UID can also be used to add tags to the Chapter. The tags come in a separate section of the container.
- The ChapterStringUID is an optional UTF-8 string which also uniquely refers to a chapter but from an external perspective. It can act as a "WebVTT cue identifier" which "can be used to reference a specific cue, for example from script or CSS".
During muxing, the ChapterUID is generated and checked for unicity, while the ChapterStringUID receives the user defined UID. In order to be able to refer to chapters from the tags section, we maintain an internal Toc tree with the generated ChapterUID.
When demuxing, the ChapterStringUIDs (if available) are assigned to the GstTocEntries UIDs and an internal toc mimicking the toc is used to keep track of the ChapterUIDs and match the tags with the appropriate GstTocEntries.
https://bugzilla.gnome.org/show_bug.cgi?id=790686
... and forward colorimetry to downstream. The Colour element describes
various color information (similar to 'colr' box in isobmff).
Note that, due to the comparatively limited syntax for color information
in vpx codecs, the color information in mkv/wemb container level
should be used for sophisticated color handling (e.g., HDR video).
https://bugzilla.gnome.org/show_bug.cgi?id=790023
Re-arrange order of index entry struct members to avoid padding
bytes in the middle of the struct, thus potentially reducing the
overall size of the struct and reducing memory used by the index.
On Linux x86_64 the size goes down from 32 bytes to 24 bytes for
each index entry.
Similar to what was done in adaptivedemux, ignore seek
events we've already handled - such as when they are received
on every srcpad of files with lots of streams.
