mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-12-02 22:46:35 +00:00
Code Issues 1 Projects Releases Wiki Activity
9186 commits 44 branches 1509 tags 484 MiB
Commit graph

516 commits

Author SHA1 Message Date
Mark Nauwelaerts
fe9e6d82ee rtph263depay: also use Picture Start Code to detect packet loss 
This ensures a whole frame is dropped if a (start) packet is lost,
rather than relying only on the DISCONT flag.
 2010-04-30 13:49:57 +02:00
Mark Nauwelaerts
84ac277add rtph263depay: detect frame start using Picture Start Code 
So we stop dropping fragments as soon as there is a picture start (code).
In particular, this prevents dropping the first frame following
initial DISCONT.
 2010-04-30 13:49:54 +02:00
Mark Nauwelaerts
e7903311f5 rtph263depay: handle a few FIXMEs 2010-04-30 13:49:51 +02:00
Mark Nauwelaerts
3692bbb7ae rtph263depay: slightly refactor payload dropping 2010-04-30 13:49:47 +02:00
Mark Nauwelaerts
a08f76a92e rtph263pay: use found GOBs to apply Mode A payloading 
... rather than falling back to sending the whole frame in one packet
if number of GOB startcodes < maximum.
One might take this further and still perform Mode B/C payloading,
but at least this should cater for decent fragments in typical cases.

Fixes #599585.
 2010-04-30 13:49:43 +02:00
Wim Taymans
754007b344 qcelpdepay: add first version of a QCELP depayloader 2010-04-29 18:07:10 +02:00
Mark Nauwelaerts
e053a89c21 rtph264depay: profile-level-id is an optional parameter 
So, if needed, extract the corresponding info from
sprop-parameter-sets.

Based on patch provided by <dxssx at gmail.com>

Fixes #612657.
 2010-04-16 12:14:26 +02:00
Stefan Kost
6772badb88 docs: enable the 2 of 65 rtp elements in the docs 2010-04-08 17:19:41 +03:00
Marco Ballesio
2ff1558a87 h264depay: handle properly STAPs 
in rtph264depay.c, lines 577-576, NALU-type 24 (Single-Time Aggregation
Packet) is handled in fall-through as NALU-type 26 (unhandled).

This leads high quality h264 streams such as:

rtsp://stream.yle.mobi/yle/areena/MEDIA_E0342657_p3.mp4

to fail with "NAL unit type 24 not supported yet" (but it's actually
supported), and thus to close any stream which contains STAPs.

The proposed one-liner patch fixes the issue.
Fixes #615051.
 2010-04-07 16:17:06 +03:00
Benjamin Otte
412cc10314 Add -Wold-style-definition flag 
And fix the warnings
 2010-03-21 15:17:46 +01:00
Benjamin Otte
3f511ec361 Add -Wwrite-strings to the configure flags 
... and fix all warnings
 2010-03-21 14:17:47 +01:00
Wim Taymans
b019a78ab8 h264pay: fix config-interval property 
Use the same units for comparing the elapsed time against the interval.

Fixes #613013
 2010-03-19 17:13:07 +01:00
Tim-Philipp Müller
073201b329 build: Makefile.am cleanups 
Mostly add $(GST_BASE_CFLAGS) where it was missing, but also fix up
order of flags and libs if needed (see docs/random/moving-plugins).
 2010-03-18 21:34:24 +00:00
Benjamin Otte
cccfeaa59c gst_element_class_set_details => gst_element_class_set_details_simple 2010-03-18 14:32:00 +01:00
Mark Nauwelaerts
fd5164af96 rtph264depay: do not call _push_ts with unneeded (and wrong) time parameter 
Fixes #613206.
 2010-03-18 12:43:14 +01:00
Benjamin Otte
1055aaa9cb Add -Wredundant-decls warning flag 
Also fix compile issues
 2010-03-17 19:35:10 +01:00
Benjamin Otte
3342b1679e Add -Wmissing-declarations -Wmissing-prototypes warning flags 
And fix all the warnings.
 2010-03-17 18:23:28 +01:00
Wim Taymans
7e363149f3 mp4gdepay: improve constantDuration guessing 
When no constantDuration has been given in the caps, try to derive one from the
timestamp difference between packets. Also keep doing this for each packet
because some broken streams might simply provide wrong timestamps.
 2010-03-17 16:27:13 +01:00
Wim Taymans
cabe01ef95 Revert "rtph263depay: baseclass handles timestamps for us" 
This reverts commit 564581e1b8.

If we don't call push_ts, there will be no timestamp at all on the outgoing
buffer.

Fixes #612154
 2010-03-08 17:48:27 +01:00
Wim Taymans
968c981e74 h263pay: fix typo in debug 2010-03-08 17:47:14 +01:00
Wim Taymans
3a09d334a0 rtpmp4gdepay: avoid division by 0 
Avoid a division by 0 when no constantDuration was specified and when out two
timestamps are equal.

Fixes #610265
 2010-02-23 12:58:03 +01:00
Wim Taymans
e43839eae9 dvdepay: don't output frames until we have a header 
Wait for the complete first 6 header DIF packets before outputting a frame.
Decoders need this info to correctly decode the data.

Fixes #610556
 2010-02-23 12:54:36 +01:00
Wim Taymans
ad6d4540a7 rtppay: don't ignore result from set_outcaps 
set_outcaps can fail and we need to propagate the result upstream.
 2010-02-12 13:53:58 +01:00
Mark Nauwelaerts
71e35b2bf3 rtpspeexpay: fix occasional buffer leak 
Fixes #608255.
 2010-01-27 17:05:34 +01:00
Olivier Crête
9afc247906 rtpg729pay: ptime should is in nanoseconds 
https://bugzilla.gnome.org/show_bug.cgi?id=607403
 2010-01-21 10:54:14 +01:00
Wim Taymans
1f6b06ce66 rtph264pay: scale spspps_interval to milliseconds 
The spspps_interval is kept in seconds. Convert it to milliseconds before
comparing it to another value in milliseconds.
 2010-01-20 16:29:57 +01:00
Wim Taymans
95333115cd rtph264pay: rename spspps-interval property 
Rename the spspps-interval property to config-interval because it is nicer.
 2010-01-20 15:44:40 +01:00
Olivier Crête
c4fa559f15 rtph264pay: Don't set profile-level-id in out caps 
The profile-level-id represents restrictions on what can be sent, it does not
describe the stream. So it should be reflected in the sink caps of the
payloader, not the src caps.

https://bugzilla.gnome.org/show_bug.cgi?id=607353
 2010-01-19 13:47:38 +01:00
Olivier Crête
7a0590b1f1 rtph264pay: Don't ignore the return value from set_outcaps 
https://bugzilla.gnome.org/show_bug.cgi?id=607353
 2010-01-19 13:35:37 +01:00
Thiago Santos
fa32e08d91 rtpmp4g(de)pay: Only handle raw aac 
rtpmp4g(de)pay should only handle raw AAC streams
 2010-01-11 15:46:50 -03:00
Thiago Santos
c563dd7eb2 rtpmp4a(de)pay: Only accept raw aac 
rtpmp4a(de)pay should only handle raw aac to conform to the RFC
 2010-01-11 15:00:00 -03:00
Wim Taymans
ed22a97478 rtph264pay: remove weird memcmp code 
Use plain memcmp for comparing memory instead of the custom buggy one.

Fixes #606198
 2010-01-07 17:00:20 +01:00
Wim Taymans
4c1947045e rtpg728pay: remove unused adapter peek 2010-01-06 13:45:59 +01:00
Olivier Crête
63a9db5826 rtpg729pay: Simplify adapter usage 
https://bugzilla.gnome.org/show_bug.cgi?id=606050
 2010-01-05 13:23:26 -05:00
Olivier Crête
0a18587792 rtpg729pay: Support ptime from caps 
https://bugzilla.gnome.org/show_bug.cgi?id=606050
 2010-01-05 13:23:26 -05:00
Olivier Crête
321829f595 rtp: Add maxptime to the README 
https://bugzilla.gnome.org/show_bug.cgi?id=606050
 2010-01-05 13:23:26 -05:00
Wim Taymans
b32ddfc174 rtpg723depay: add G723 depayloader 2010-01-05 19:03:06 +01:00
Wim Taymans
ca7ecdf2f3 rtpg729depay: remove unused variable 2010-01-05 19:02:39 +01:00
Wim Taymans
d6d06630e8 rtpg723pay: rewrite payloader 
Handle all 3 packet sizes according to RFC 3551.
Totally untested, we don't have a G723 encoder.

Fixes #605882
 2010-01-05 18:33:25 +01:00
Wim Taymans
59dc9dac03 rtph263ppay: use faster _adapter_copy() whem possible 2009-12-24 17:01:54 +01:00
Mark Nauwelaerts
05307c46e7 rtph264pay: fix uninitialized variable 2009-12-23 19:39:05 +01:00
Wim Taymans
9f098b352b rtp: use boilerplate 2009-12-23 13:09:54 +01:00
Wim Taymans
2ee7f58416 rtpL16pay: convert to baseaudiopayload 
Use GstRTPBaseAudioPayload as the base class. This saves a lot of code and fixes
a bunch of problems that were already solved in the base class.

Fixes #853367
 2009-12-23 00:38:05 +01:00
Wim Taymans
cdb8c718bb rtppcmapay: the boilerplate macro sets parent_class 2009-12-23 00:30:49 +01:00
Wim Taymans
251401aef1 rtph263depay: add some fixmes 2009-12-22 14:41:35 +01:00
Wim Taymans
564581e1b8 rtph263depay: baseclass handles timestamps for us 2009-12-22 14:35:13 +01:00
Wim Taymans
27ff4a8a47 rtph263depay: reset start variable properly 2009-12-22 14:27:40 +01:00
Marco Ballesio
74b3439374 Drop the whole frame if a packet is lost. 
Fixes #582575
 2009-12-22 11:48:52 +01:00
Wim Taymans
4687199348 rtph264pay: add option to insert PPS/SPS in streams 
Add a new spspps-interval property to instruct the payloader to insert
SPS and PPS at periodic intervals in the stream.
Rework the SPS/PPS handling so that bytestream and AVC sample code both use the
same code paths to handle sprop-parameter-sets. This also allows to have the AVC
code to insert SPS/PPS like the bytestream code.

Fixes #604913
 2009-12-21 20:45:54 +01:00
Tiago Katcipis
908a9ee63b rtp: add G723 payloader 
Fixes #597823
 2009-12-17 17:27:42 +01:00
Mark Nauwelaerts
e49e71a1d9 rtph264depay: optionally merge NALUs into Access Units 
... which may be expected/desired by some downstream decoders
(and spec-wise highly recommended for at least non-bytestream mode).
 2009-11-26 17:29:26 +01:00
Wim Taymans
8c3b03de26 rtp: add BroadcomVoice depayloader 2009-11-18 10:50:43 +01:00
Wim Taymans
039d225a78 rtpbvpay: add rfc reference 2009-11-18 10:50:43 +01:00
Wim Taymans
02476fb5a3 rtp: add BroadcomVoice payloader 2009-11-18 10:50:43 +01:00
Gabriel Millaire
773f142483 celtpay/depay : change GST_DEBUG_OBJECT to GST_LOG_OBJECT in pay_handle_buffer and depay_process 2009-11-04 12:02:50 -05:00
Gabriel Millaire
ac90398092 celtpay/depay: Negotiate parameters through caps 
celtdepay : added default framesize(480) channels(1) and clockrate(32000)
            depay_setcaps : now gets channels and framesize from string with default value
            depay_process : now adds timestamp to outbuf
            Added frame_size to GstRtpCeltDepay
            Changed some GST_DEBUG to GST_DEBUG_OBJECT or GST_LOG_OBJECT
celtpay : getcaps : gets channel and framesize and sets caps
          Added frame-size to static caps for audio/x-celt
 2009-11-04 12:02:50 -05:00
Stefan Kost
f854836f5c buikd: explicitely cast, to tell some compilers that this is not long int 2009-10-09 14:21:09 +03:00
Stefan Kost
f41d7e7bd5 build: don't cast, but use the right format specified instead 
This correct some of the previous macos fixes.
 2009-10-09 13:54:24 +03:00
Josep Torra
863233abf5 rtpvrawpay: fix warning on macosx 2009-10-09 12:01:10 +02:00
Josep Torra
a1fbe64317 rtph263pay: fix warning on macosx 2009-10-09 11:57:59 +02:00
Stefan Kost
e0cdd879b4 build: fprintf, sprintf, sscanf need stdio.h 2009-10-07 14:03:20 +03:00
Stefan Kost
d1d126b5b4 rtp: add missing include to fix the build 2009-10-02 18:25:16 +03:00
Olivier Crête
00db9a585b rtpg729pay/depay: Demote per-buffer debug messages to log level 2009-09-30 20:36:05 -04:00
Olivier Crête
165516f0ef rtpg729pay: Don't leak incoming buffers after subbuffering them 2009-09-30 20:36:05 -04:00
Olivier Crête
680c97a7ca rtpg729pay/depay: Add debug categories 2009-09-30 20:36:05 -04:00
Olivier Crête
1ba7693f7a rtpg729pay: Remove long unneeded define replacement 2009-09-30 20:36:05 -04:00
Olivier Crête
750387f520 rtpg729pay: Fix adapter leak 
The adapter would be leaked if it was empty and the data could be pushed out directly.
 2009-09-15 17:24:24 -04:00
Olivier Crête
411c71da13 rtph263pay: Allocate Boundry structs on the stack instead of the heap to avoid leaks 
Fixes bug #594691.
 2009-09-11 07:31:38 +02:00
Havard Graff
6108024838 rtpjpegdepay: add missing math.h include 
Fixes #594247
 2009-09-08 13:32:51 +02:00
Wim Taymans
bf73a6ee3a rtpmpapay: whitespace fixes 2009-09-03 19:17:00 +02:00
Mark Nauwelaerts
c9a434bbff rtpmp4gdepay: consider (optional) auxiliary data when parsing 2009-08-31 16:50:01 +02:00
Mark Nauwelaerts
30efa405f3 rtpmp4gdepay: handle broken AU-Index in non-interleaved streams 
In case of non-interleaved (= sequentially payloaded) streams,
the AU-Index serves little purpose (that is not already covered by
RTP fields).  (Broken) Payloaders might consider this field then
to be disregarded and have non spec compliant values, e.g. each
RTP packet having AU-Index 2 (rather than 0).  As such, ensure/force
simple sequential sending of non-interleaved streams.
 2009-08-31 16:50:01 +02:00
Wim Taymans
6a53d0a2c9 rtp: whitespace fixes 2009-08-31 11:32:06 +02:00
Edward Hervey
0d6f0801f5 rtp: Remove dead assignments and resulting unneeded variables. 2009-08-10 09:58:33 +02:00
Wim Taymans
ddfa9961c6 rtph264pay: use array instead of queue 2009-08-06 11:14:44 +02:00
Mark Nauwelaerts
2bfb42c5f8 rtph264pay: push NALs only after SPS/PPS 
parse complete (bytestream) buffer for SPS/PPS before pushing NALs.

Fixes #564501.
 2009-08-06 11:14:44 +02:00
Edward Hervey
d65d542e9d rtpqdm2depay: Fix debug statement. 2009-08-04 11:17:17 +02:00
Edward Hervey
20c7977b9b rtpqdm2depay,rtpsv3vdepay: Add debugging category. 2009-08-03 21:26:31 +02:00
Edward Hervey
25c5514fab rtpqdm2depay: Handle gaps in incoming packets. 
Whenever we see a gap, we flush the temporary packets (but not the adapter). If we
had some data temporarily stored it will be outputted (the sound will sound a bit
garbled... but that's how it sounds on MacOSX :)
 2009-08-03 21:26:30 +02:00
Edward Hervey
6aff520a24 rtpqdmdepay: Fix CRC calculation and remove commented code. 2009-08-03 21:26:30 +02:00
Edward Hervey
d39c057e42 rtp: New QDM2 rtp depayloader. 
Reverse-engineered by comparing:
* A rtp hinted file provided by DarwinStreamingServer
* The output procued by DSS for that same file

Also used various streaming sources available on the internet to fine-tune
the code.

The header/codec_data extraction methods are from FFMpeg (LGPL).
 2009-08-03 21:26:30 +02:00
Edward Hervey
e2b3665ae6 rtpsv3vdepay: Properly fill codec_data and cleanup code a bite more. 2009-08-03 21:26:30 +02:00
Edward Hervey
65a2871e90 rtpsv3vdepay: Only output buffers once we're configured. 2009-08-03 21:26:30 +02:00
Edward Hervey
1743763c0b rtpsv3vdepay: Add more encoding-name variants 2009-08-03 21:26:30 +02:00
Luc Deschenaux
654ca56d85 jpegdepay: use attributes for extra properties 
Use some of the SDP attributes when they are present to specify the output
dimension and framerate. This allows us to receive jpeg frames larger than
2040 width/height.

Fixes #564437
 2009-08-03 18:02:31 +02:00
Wim Taymans
efb9c17975 RTP docs: update with attributes in caps 2009-08-03 18:01:27 +02:00
Edward Hervey
050e91995e rtpsv3depay: Fix width/height calculation, bring up to marginal rank. 
Based on documentation found on http://wiki.multimedia.cx/
 2009-07-29 13:39:08 +02:00
Marc Leeman
7484b631b7 mpvpay: Rework the timestamping 
Rework the timestamping in the mpv payloader so that the timestamps are more
accurate.

Fixes #587680
 2009-07-13 17:55:25 +02:00
Ognyan Tonchev
83a0e7d2a3 rtpmp4vpay: add support for buffer-list 
See #585559
 2009-06-19 18:00:35 +02:00
Ognyan Tonchev
d5d0364d7b rtpjpegpay: add support for buffer-lists 
See #585559
 2009-06-19 17:57:12 +02:00
Ognyan Tonchev
40ec22788f rtph264pay: add support for buffer-lists 
See #585559
 2009-06-19 17:53:32 +02:00
Wim Taymans
a2cef3e5c2 mp4gdepay: guess constantDuration better 
Do a better job at guessing the constantDuration parameter when it is not
present in the caps.

Fixes #585205
 2009-06-15 22:42:45 +02:00
Olivier Crête
4c782db81d rtpsirenpay: Remove deprecated symbol 
Patch by: Luis Menina
 2009-06-13 21:02:45 -04:00
Wim Taymans
6f3c1728f3 rtp: update README, fix some typos, mention gstrtpbin 2009-06-11 22:30:06 +02:00
Olivier Crête
645b9449a5 rtph263pay: Default to doing A, B and C modes, not only A 2009-06-10 16:09:56 -04:00
Olivier Crête
dc61a71e5d rtpsirenpay: Put the bitrate in the RTP caps 
The MS code seems to require the bitrate to interoperate and
draft-ietf-avt-rtp-g7221-00 also has it.
 2009-06-09 14:13:31 -04:00
Edward Hervey
6eec2a060d rtp: Don't forget to dist the headers for the CELT (de)payloaders. 2009-06-08 08:21:43 +02:00
Wim Taymans
ace2a84447 celtdepay: add CELT depayloader 2009-06-05 18:57:30 +02:00
Wim Taymans
ec554a7f02 rtpceltpay: add CELT RTP payloader 2009-06-05 18:57:30 +02:00
Wim Taymans
e7987ed06b vrawpay: trim output buffers 
Remove the leftover unused bytes in the output buffer.
Fixes #584613
 2009-06-02 19:33:28 +02:00
Wim Taymans
dabddb8126 vrawdepay: fix parsing of sampling field 
commit a12d9a80f2 broke the parsing of the
sampling.
 2009-06-02 19:33:28 +02:00
Wim Taymans
e13e3c6249 rtpmp4vpay: don't look for headers in some cases 
In some streams (starting with 00000100) don't look for the headers but push
data as it is.
Fixes #582153
 2009-05-25 10:59:17 +02:00
Wim Taymans
d7fd42999e rtp: fix channel positions for mono 2009-05-21 22:05:09 +02:00
Sebastian Dröge
d94a71a4c5 rtp: Link to -lm 
Fixes bug #582281.
 2009-05-12 13:00:46 +02:00
Wim Taymans
a9e496d92f rtj2kdepay: add basic JPEG 2000 depayloader 2009-05-08 11:35:02 +02:00
Wim Taymans
5ec808cf7e rtpj2kpay: set marker bit correctly 2009-05-08 11:32:03 +02:00
Wim Taymans
a4dfd61a77 rtpj2kpay: add a simple JPEG 2000 payloader 2009-05-08 10:38:42 +02:00
Wim Taymans
ee1f1ae5d5 rtpjpegpay: we only need to swap bits on LE 2009-05-08 10:31:12 +02:00
Wim Taymans
e2a483f0f9 rtpjpegpay: refuse some unsupported jpeg formats 2009-05-06 23:56:44 +02:00
Wim Taymans
4ef9eee8b4 rtptheorapay: fix description 2009-05-06 18:06:49 +02:00
Wim Taymans
d87871f5f7 rtpjpegpay: rewrite quant table handling 
Rewrite the quant table parsing to also handle multiple tables in one JPEG HDQ
segment.
Handle more jpeg types by keeping track of the tables used per component and
putting the used ones in the quant headers.
 2009-05-06 16:11:49 +02:00
Wim Taymans
b7c5847dbd rtpjpegpay: handle input with 1 quant table 
Also handle input with just one quant table, simply duplicate the quant table.
Handle invalid SOF correctly and some small cleanups.
Fixes #578257
 2009-05-06 12:56:58 +02:00
Wim Taymans
0f1033c59f rtpjpegpay: correctly set the type header 
Don't require width/height on the caps. Use the SOF header to find width/height
and fall back to the caps if there is no SOF. Also use the SOF info to find the
subsampling and quantization tables used. This allows us to set the right type
value in the JPEG rtp header.

Deprecate the quality property, it's unused now and it was used wrongly before.

Always send full quant tables for now until we have some code to detect default
ones.

Fixes #580880
 2009-05-05 16:32:17 +02:00
Wim Taymans
7c59f39bfe rtpjpegdepay: use width/height from payload 
Use the width and the height from the payload headers and set them on the
output caps for added awesomeness.

Fix quant parsing, we need to check the type in the lower 6 bits.

Add first bits of caching quantization tables.
 2009-05-05 16:28:44 +02:00
Wim Taymans
f33501ad4b g726pay: fix compilation 2009-04-27 10:08:55 +02:00
Wim Taymans
84c3d1a2c8 g726pay: add RFC compliant packetizing 
Shuffle the input bits according to RFC 3551 for G726 payloads.
Add option to force the previous behaviour.

Fixes #567140
 2009-04-27 10:08:55 +02:00
Wim Taymans
e213debe8e g726depay: add debug category 
Add a debugging category, add some comments and remove _peek_parent().
 2009-04-27 10:08:55 +02:00
Edward Hervey
1183015954 rtph263pay: And let's not forget to remove the unused variable. 2009-04-18 19:11:06 +02:00
Edward Hervey
1554c6637f rtph263pay: Remove dead assignments, the variables are never read after. 2009-04-18 18:51:30 +02:00
Edward Hervey
3efcf936e1 rtpmp4vpay: Remove dead assignment. The value is never read after. 2009-04-18 18:51:29 +02:00
Edward Hervey
84b6d07c75 rtpamrdepay: Remove unneeded variable, the value is only read once. 2009-04-18 18:51:29 +02:00
Edward Hervey
f6b774fbcc rtpamrpay: Remove unneeded variable, the value is only read once. 2009-04-18 18:51:29 +02:00
Edward Hervey
bf9c2067cf rtpvorbispay: Remove dead assignment. Value never read after. 2009-04-18 18:51:29 +02:00
Edward Hervey
58a7c2ad8d rtptheorapay: Remove dead assignment. Value never read after. 2009-04-18 18:51:29 +02:00
Edward Hervey
8cf696a1f1 rtptheoradepay: Remove unused variable, it's never being read. 2009-04-18 18:51:29 +02:00
Edward Hervey
a12d9a80f2 rtpvrawdepay: Remove dead assignment. 
The value of 'str' will never be used in these cases.
 2009-04-18 18:51:28 +02:00
Edward Hervey
0cb5b42d54 Remove trivial unused variables detected by CLang static analyzer. 2009-04-18 18:51:28 +02:00
Edward Hervey
cdb03bdc2b Remove blank {set|get}_property/change_state/finalize methods. 2009-04-18 18:51:27 +02:00
Edward Hervey
4a9e80720a Remove unused variables in _class_init 
Detected by LLVM's CLang static analyzer
 2009-04-18 18:51:27 +02:00
Edward Hervey
f9d7640bc9 rtptheoradepay: Fix build on macosx. 
Use G_GSIZE_FORMAT instead of u.
 2009-04-18 08:39:57 +02:00
James Andrewartha
ac48c2d211 rtph263pay: fix compilation on big-endian 
Some semicolons were missing from the big-endian structs in gstrtph263pay.h.
A GST_DEBUG call was missing a format specifier.

Fixes #579069
 2009-04-15 19:26:22 +02:00
Wim Taymans
787124dad6 g726depay: add property for aal2 force 2009-04-15 14:07:57 +02:00
Wim Taymans
0802ba8730 g726depay: implement RFC3551 packing 
We implemented the AAL2 packing, add the encoding-name for those to the caps and
a property to force AAL2 decoding (always TRUE for now).
Implement RFC3551 unpacking for regular G726.
See #567140.
 2009-04-15 13:56:17 +02:00
Wim Taymans
c34d5aa016 rtph263pay: fix build 2009-04-15 00:22:43 +02:00
Youness Alaoui
17d9cb3319 h263pay: various fixes 
Re-enable mode A support and a property to control it.
Fix memory leak of GstRtpH263PayBoundry objects.
Fix marker.
Fixes #509311
 2009-04-14 18:52:48 +02:00
Janin Kolenc
de2c489526 h263pay: Fix the payloader 
Fix the H263 payloader to be more RFC 2190 compliant.
See #509311
 2009-04-14 18:44:51 +02:00
Michael Smith
85d7fb0599 rtptheorapay: fix length encoding in packed headers. 
As for vorbis payloader; this by inspection had the same bug.
 2009-04-01 17:31:18 -07:00
Michael Smith
5f9d9e2243 rtpvorbispay: in packed headers, properly flag multibyte lengths. 
In the sequence of header lengths, for headers >127 bytes, we use
multiple bytes to encode the length. Bytes other than the last must have
the top (flag) bit set.
 2009-04-01 17:23:33 -07:00
Tim-Philipp Müller
6e5f789fa0 rtpmp4adepay: output should be framed already 2009-03-30 14:13:29 +01:00
Tim-Philipp Müller
4bcd50ccbd rtpmp4apay,rtpmp4depay: fix buffer leaks in AAC payloader and depayloader 2009-03-25 10:36:49 +00:00
Tim-Philipp Müller
297bbfbebc rtpmp4apay: warn if input is unframed 2009-03-25 10:36:49 +00:00
Tim-Philipp Müller
fa3d457882 rtpmp4adepay: don't append an extra 0 byte to the codec data 
The audioMuxVersion structure is packed in such a way that the codec
data does not start byte-aligned, which means there's an extra bit of
padding at the end. We don't want that bit in the codec data, since
some decoders seem get confused when they're fed with an extra codec
data byte (also it's just not right of course).
 2009-03-20 01:06:14 +00:00
Wim Taymans
f18dabdd57 rtph264depay: fix base64 decoding 
We can't pass -1 to _decode_step, that functions returns 0 right away instead of
decoding up to the string end.
 2009-03-19 13:25:57 +01:00
Sebastian Dröge
77e2637590 rtp: Use GLib functions for encoding/decoding base64 2009-03-18 14:50:17 +01:00
Edward Hervey
72a9b89b50 gstrtpvorbisdepay: Fix build on macosx 2009-03-10 10:16:27 +01:00
Wim Taymans
06efeff5d9 vorbisdepay: fix some leaks 
And leak the codebooks.
Use glib base64 decoders.
Use subbuffers to avoid a memcpy of the headers.
 2009-03-09 18:07:20 +01:00
Olivier Crête
e4b8c514cc Move siren rtp pay/depay from gst-plugins-farsight 2009-03-04 13:24:34 -05:00
Wim Taymans
8b6c8b934a rtpmp4vpay: Add support for more formats 
Hack around short header mpeg4 video files and put the short header as the
config string.
Fixes #572551.
 2009-03-02 17:18:55 +01:00
Wim Taymans
af2e8f8470 rtpvrawdepay: fail on interlaced video 
Fail on interlaced video until we support it.
 2009-02-26 13:06:17 +01:00
Wim Taymans
62d5787bcd rtpvrawpay: fail on interlaced video 
Detect and fail when trying to payload interlaced video.
 2009-02-26 13:00:58 +01:00