Catch users wrongly setting foreign pads or wrong pads as
the selector's active pad, which leads to all kinds of
other issues. It's a programming error so handle it just
like we would if we had direct API.
https://bugzilla.gnome.org/show_bug.cgi?id=795309
The queue gets filled by the tail, so a query will always be the tail
object, not the head object. Also add a _peek_tail_struct() method to the
GstQueueArray to enable looking at the tail.
With unit test to prevent future regression.
https://bugzilla.gnome.org/show_bug.cgi?id=762875
Start task on new source pads added at runtime after they
have been added to the element, not during activation.
This ensures the pads can post their CREATE stream-status
messages and the application can set thread priorities.
https://bugzilla.gnome.org/show_bug.cgi?id=756867
`./configure --disable-gst-tracer-hooks` didn't do anything, hooks were
always enabled regardless of the option. It works correctly in the
Meson build though.
When EOS reaches concat, it will switch to the next candidate as its
activate pad.
The problem arises when there is only one sinkpad, the "active" pad
becomes NULL. This results in concat becoming unusable after it receives
a *single* EOS on its single sinkpad.
If we detect there is a single sinkpad and there is no current active pad:
* If we are waiting (from selected sink event/buffer), become the current
active pad.
* If there is a seek request, send it upstream. We don't switch the
active_sinkpad property at that point in time, since the seek could
fail. If the seek succeeds, the following SEGMENT (or STREAM_START)
will cause the pad_wait() to elect that pad as the new active one.
* Flush events get forwarded
https://bugzilla.gnome.org/show_bug.cgi?id=790167
Include the timestamp of the recorded log as in the 'stats' tracer.
This can be useful, for example, to plot a graph showing the latency
over time.
https://bugzilla.gnome.org/show_bug.cgi?id=781315
The goal of this tracer is to measure the processing latency between a
src and a sink. In push mode, the time was read after the chain function
have returned. As the amount of time we wait to get synched is reverse
to the amount of latency the source introduced, the result was quite
surprising.
This patch moves the latency calculation in the pre-push hook. When
there is no processing in a a pipeline (e.g. fakesrc ! fakesink), the
latency will now be 0 as it's supposed to. For pull mode, the code was
already correct. When GstBaseSink operate in pull mode, the processing
time is done durring the pull, so pull-post is the right hook. The
synchronization will happen after the pull has ended. Note that
GstBaseSink rarely operate in pull mode.
https://bugzilla.gnome.org/show_bug.cgi?id=788431
If the aggregated size is 0 and we create a pool, the pool would provide
buffers with no memory assigned. Handle that case and skip the pool.
This was the behaviour before cf803ea9f4.
Add a test for this scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=730758
When enabled, this property will make the allocation query fail. This is
the same as one could have done using a tee before the tee started
implementing the allocation query.
https://bugzilla.gnome.org/show_bug.cgi?id=730758
Otherwise we might try unscheduling a clock id (that does not exist
yet), then the streaming thread waits for id and the state change never
continues because the streaming thread is blocked.
Also shutting down and flushing and similar should return FLUSHING, not
EOS. The stream is not over, we're just not accepting any buffers
anymore.
After EOS, it is possible for a pad to be resetted by sending
either a STREAM_START or SEGMENT event
Mimic the same behaviour when receiving STREAM_START/SEGMENT events
in queue if we are EOS'd
https://bugzilla.gnome.org/show_bug.cgi?id=786056
After EOS, it is possible for a pad to be resetted by sending
either a STREAM_START or SEGMENT event
Mimic the same behaviour when receiving STREAM_START/SEGMENT events
in queue2 if we are EOS'd
https://bugzilla.gnome.org/show_bug.cgi?id=786056
When queue-like elements are in "EOS" situation (received GST_FLOW_EOS
from downstream or EOS was pushed), they drain buffers/events that
wouldn't be processed anyway and let through events that might
modify the EOS situation.
Previously only GST_EVENT_EOS and GST_EVENT_SEGMENT events were let
through, but we also need to allow GST_EVENT_STREAM_START to go
through since it resets the EOS state of pads since 1.6
https://bugzilla.gnome.org/show_bug.cgi?id=786034
When downstream returns NOT_LINKED, we return the buffering level
as being 100%.
Since the queue is no longer being consumed/used downstream, we
want applications to essentially "ignore" this queue for buffering
purposes.
If other streams are still being used, those stream buffering levels
will be used. If none are used, upstream will post an error message
on the bus indicating no streams are used.
https://bugzilla.gnome.org/show_bug.cgi?id=785799
... and use the biggest interleave value among streaming threads.
This is to optimize multiqueue size adaptation on adaptive streaming
use case with "use-interleave" property.
https://bugzilla.gnome.org/show_bug.cgi?id=784448
Return the correct flow return instead of returning always flushing.
This would cause queue to convert not-linked to flushing and making
upstream elements stop.
Based on the previous patch for queue2.
https://bugzilla.gnome.org/show_bug.cgi?id=776999
Return the correct flow return instead of returning always flushing.
This would cause queue2 to convert not-linked to flushing and making
upstream elements stop.
https://bugzilla.gnome.org/show_bug.cgi?id=776999
active-pad switch causes reconfigure event with lock taken,
and upstream element might query the current position or duration
before returning the reconfigure event.
Meanwhile, gst_input_selector_get_linked_pad() is used to get srcpad
inside of default query handle, and it takes also lock.
Since inputselector is still locked by active-pad switch, and so the query
cannot be handled further.
https://bugzilla.gnome.org/show_bug.cgi?id=775445
This is what Autoconf already does for us, so just do this. Avoids
people making typos while adding header or function checks. Because we
use a config.h.meson, such typos won't even be noticed.
Also, starting from Meson 0.36.0, the XCode 8 workaround that we use for
clock_gettime is no longer needed.
Before emitting have-type, switch to NORMAL
mode, as part of the have-type processing sends
the caps event downstream, which might trigger
actions like downstream autoplugging or
flushing seeks - and the latter are only
passed upstream if we've set typefind to NORMAL
mode.
It might happen that the srcpad task function is never called at all, in
which case unlocking everything from there will never happen.
Make sure to unlock everything another time after the task function is
definitely stopped.
https://bugzilla.gnome.org/show_bug.cgi?id=776039
This is an API break but that API has not been released yet.
We are passing a flag rather than a simple boolean as we can imagine
to implement more features in the future for example to retrieve a
stack trace for all the threads, etc..
Retrieving source file and line numbers is pretty
expensive while getting a stack trace, this new argument
allows the user to decide to retrieve a backtrace
without those infos instead which is much faster.
For example running $ GST_LEAKS_TRACER_STACK_TRACE=1 GST_DEBUG=GST_TRACER:7 \
GST_TRACERS=leaks time gst-launch-1.0 videotestsrc num-buffers=1 ! fakesink:
* With simple stack traces:
0.04s user 0.02s system 99% cpu 0.060 total
* With full stack traces:
0.66s user 0.23s system 96% cpu 0.926 total
https://bugzilla.gnome.org/show_bug.cgi?id=775423
The correct behaviour of anything stuck in the ->render() function
between ->unlock() and ->unlock_stop() is to call
gst_base_sink_wait_preroll() and only return an error if this returns an
error, otherwise, it must continue where it left off!
https://bugzilla.gnome.org/show_bug.cgi?id=773912
When running in sync-by-running-time mode, pad groups
that have exactly 1 pad and it's not-linked might never
wake up after computing a high time, as the per-pad-group
high time was only recomputed when a pad in the group
advances.
Wake those up using the global multiqueue high-time across
all other groups instead.
https://bugzilla.gnome.org/show_bug.cgi?id=774322
When subtracting queued data sizes from upstream queries
in queue, queue2, downloadbuffer and typefind, clamp the
result to not go negative, in case upstream returned
a nonsense value that's too small (as could happen if
upstream is estimating, or just broken)
Implement handling in basesink to not unconditionally discard
out-of-segment buffers and expose it as a new property on fakesink
(not unconditionally in all basesink based sinks).
The property defaults to FALSE.
https://bugzilla.gnome.org/show_bug.cgi?id=765734
Otherwise downstream will have an inconsistent set of sticky events at this
point, e.g. when a TAG event is pushed and downstream wants to relate it to
the stream by looking at the current STREAM_START event.
https://bugzilla.gnome.org/show_bug.cgi?id=768526
On the first buffer, it's possible that sink_segment is set but
src_segment has not been set yet. If this is the case, we should not
calculate cur_level.time since sink_segment.position may be large and
src_segment.position default is 0, with the resulting diff being larger
than max-size-time, causing the queue to start leaking (if
leaky=downstream).
One potential consequence of this is that the segment event may be
stored on the srcpad before the caps event is pushed downstream, causing
a g_warning ("Sticky event misordering, got 'segment' before 'caps'").
https://bugzilla.gnome.org/show_bug.cgi?id=773096
low/high-watermark are of type double, and given in range 0.0-1.0. This
makes it possible to set low/high watermarks with greater resolution,
which is useful with large multiqueue max sizes and watermarks like 0.5%.
Also adding a test to check the fill and watermark level behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=770628
To make the code clearer, and to facilitate future improvements, introduce
a distinction between the buffering level and the buffering percentage.
Buffering level: the queue's current fill level. The low/high watermarks
are in this range.
Buffering percentage: percentage relative to the low/high watermarks
(0% = low watermark, 100% = high watermark).
To that end, get_percentage() is renamed to get_buffering_level(). Also,
low/high_percent are renamed to low/high_watermark to avoid confusion.
mq->buffering_percent values are now normalized in the 0..100 range for
buffering messages inside update_buffering(), and not just before sending
the buffering message. Finally the buffering level range is parameterized
by adding a new constant called MAX_BUFFERING_LEVEL.
https://bugzilla.gnome.org/show_bug.cgi?id=770628
When calculating the high_time, cache the group value in each singlequeue.
This fixes the issue by which wake_up_next_non_linked() would use the global
high-time to decide whether to wake-up a waiting thread, instead of the group
one, resulting in those threads constantly spinning.
Tidy up a bit the waiting logic while we're at it.
With this patch, we go from 212% playing a 8 audio / 8 video file down to less
than 10% (most of it being the video decoding).
https://bugzilla.gnome.org/show_bug.cgi?id=770225
low/high-watermark are of type double, and given in range 0.0-1.0. This
makes it possible to set low/high watermarks with greater resolution,
which is useful with large queue2 max sizes and watermarks like 0.5%.
Also adding a test to check the fill and watermark level behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=769449
To make the code clearer, and to facilitate future improvements, introduce
a distinction between the buffering level and the buffering percentage.
Buffering level: the queue's current fill level. The low/high watermarks
are in this range.
Buffering percentage: percentage relative to the low/high watermarks
(0% = low watermark, 100% = high watermark).
To that end, get_buffering_percent() is renamed to get_buffering_level(),
and the code at the end that transforms to the buffering percentage is
factored out into a new convert_to_buffering_percent() function. Also,
the buffering level range is parameterized by adding a new constant called
MAX_BUFFERING_LEVEL.
https://bugzilla.gnome.org/show_bug.cgi?id=769449
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
