Internal gst_net_utils_set_socket_dscp renamed and turned into external
function. Similar functionality exists in e.g. multidupsink, which could
instead use this one.
The signal will be emitted when a buffer was consumed on
a pad, if the newly-added "emit-signals" property has been
set to TRUE.
Handlers connected to the signal will receive a valid reference on
the consumed buffer, allowing for example the retrieval of metas in
order to forward them once an output buffer is pushed out.
gstcheck.c:142: Warning: GstCheck: gst_check_add_log_filter: return value: Invalid non-constant return of bare structure or union; register as boxed type or (skip)
gstcheck.h:178: Warning: GstCheck: gst_check_run_suite: argument suite: Unresolved type: 'Suite*'
gstharness.c: Use G_GSIZE_FORMAT instead of hard-coding %zu
error: unknown conversion type character 'z' in format [-Werror=format]
gst-inspect.c: GPid is void* on non-UNIX, and we only use it on UNIX
error: initialization makes pointer from integer without a cast [-Werror]
gstmeta.c: Use and then discard value
error: value computed is not used [-Werror=unused-value]
With this, gstreamer builds with -Werror on MinGW
This adds two custom gdb commands:
'gst-dot' creates dot files that a very close to what
GST_DEBUG_BIN_TO_DOT_FILE() produces. Object properties and buffer content
(e.g. codec-data in caps) are not available.
'gst-print' produces high-level information about GStreamer objects. This
is currently limited to pads for GstElements and events for the pads. The
output can look like this:
(gdb) gst-print pad.object.parent
GstMatroskaDemux (matroskademux0) {
SinkPad (sink, pull) {
}
SrcPad (video_0, push) {
events:
stream-start:
stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/001:1274058367
caps: video/x-theora
width: 1920
height: 800
pixel-aspect-ratio: 1/1
framerate: 24/1
streamheader: < 0x5555557c7d30 [GstBuffer], 0x5555557c7e40 [GstBuffer], 0x7fffe00141d0 [GstBuffer] >
segment: time
rate: 1
tag: global
container-format: Matroska
}
SrcPad (audio_0, push) {
events:
stream-start:
stream-id: 0463ccb080d00b8689bf569a435c4ff84f9ff753545318ae2328ea0763fd0bec/002:1551204875
caps: audio/mpeg
mpegversion: 4
framed: true
stream-format: raw
codec_data: 0x7fffe0014500 [GstBuffer]
level: 2
base-profile: lc
profile: lc
channels: 2
rate: 44100
segment: time
rate: 1
tag: global
container-format: Matroska
tag: stream
audio-codec: MPEG-4 AAC audio
language-code: en
}
}
Fixes flaky appsrc unit test where depending on scheduling
the submitted list might not be writable if submitted via
an action signal from the application thread.
Fixes gst-plugins-base#522
baseparse internally uses a 64kb buffer for pulling data from upstream.
If a 64kb pull is failing with a short read, it would previously pull
again the requested size.
Doing so is not only inefficient but also seems to cause problems with
some elements (rawvideoparse) where the second pull would fail with EOS.
Short reads are only allowed in GStreamer at EOS.
Closes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/294
Without this bindings get confused about the meaning of references, and
we really own these references if they are not already owned by
something else.
We won't be able to do ASSERT_CRITICAL, but the main body of the tests
are still valid, and given we ship GStreamer with this configuration, it
is important to be able to run some tests against it.
This adds gdb pretty printer for some GStreamer types.
For GstObject pointers the type and name is added, e.g.
"0x5555557e4110 [GstDecodeBin|decodebin0]".
For GstMiniObject pointers the object type is added, e.g.
"0x7fffe001fc50 [GstBuffer]".
For GstClockTime and GstClockTimeDiff the time is also printed in human
readable form, e.g. "150116219955 [+0:02:30.116219955]".
Fixes#320
By moving the functionality down to the testclock, the implementation
no longer needs to poll the waits, but rather wait properly for
them to be added.
The performance-hit here would be that by polling the test-clock
regularly, you would create contention on the testclock-lock, making code
using the testclock (gst_clock_id_wait) fighting for the lock.
Previously, with opportunistic sync we'd track a master
clock as soon as we see a SYNC message, and hence sync up
faster, but then we'd announce we're synched before seeing
the ANNOUNCE, leaving the clock details like grandmaster-clock
empty.
A better way is to start tracking the clock opportunistically,
but not announce we're synched until we've also seen the ANNOUNCE.
The follow-up and delay-resp messages carry precise
timestamps for the arrival at the clock master, but
the local return time is unimportant, so we should be very
lenient in accepting them late. Some PTP masters don't
prioritise sending those packets, and we reject all the
responses and never sync - or take forever to do so.
Increase the tolerance to 20x the mean path delay.
Also fix a typo in one debug output that would print
the absolute time of the delay-resp message, not the offset
from the delay-req that it's actually being compared against.
gst_queue_array_clear will clear the GstQueueArray,
gst_queue_array_set_clear_func will set a clear function for each
element to be called on _clear and on _free.
https://bugzilla.gnome.org/show_bug.cgi?id=797218
This is exposed as a solution to the use case of plugging in
sources with a higher latency after the aggregator has started
playing with an initial set of sources, allowing to avoid resyncing.
https://bugzilla.gnome.org/show_bug.cgi?id=797213
Otherwise we try to build a shared lib when we build the rest
of GStreamer statically, which won't work because we pass
-DGST_STATIC_COMPILATION when building statically, which means
we won't dllimport public symbols from our libs which means
that on Windows the unit tests will fail to link to libgstcheck.
https://bugzilla.gnome.org/show_bug.cgi?id=797185
Add new GST_API_EXPORT in config.h and use that for GST_*_API
decorators instead of GST_EXPORT.
The right export define depends on the toolchain and whether
we're using -fvisibility=hidden or not, so it's better to set it
to the right thing directly than hard-coding a compiler whitelist
in the public header.
We put the export define into config.h instead of passing it via the
command line to the compiler because it might contain spaces and brackets
and in the autotools scenario we'd have to pass that through multiple
layers of plumbing and Makefile/shell escaping and we're just not going
to be *that* lucky.
The export define is only used if we're compiling our lib, not by external
users of the lib headers, so it's not a problem to put it into config.h
Also, this means all .c files of libs need to include config.h
to get the export marker defined, so fix up a few that didn't
include config.h.
This commit depends on a common submodule commit that makes gst-glib-gen.mak
add an #include "config.h" to generated enum/marshal .c files for the
autotools build.
https://bugzilla.gnome.org/show_bug.cgi?id=797185
For each lib we build export its own API in headers when we're
building it, otherwise import the API from the headers.
This fixes linker warnings on Windows when building with MSVC.
The problem was that we had defined all GST_*_API decorators
unconditionally to GST_EXPORT. This was intentional and only
supposed to be temporary, but caused linker warnings because
we tell the linker that we want to export all symbols even
those from externall DLLs, and when the linker notices that
they were in external DLLS and not present locally it warns.
What we need to do when building each library is: export
the library's own symbols and import all other symbols. To
this end we define e.g. BUILDING_GST_FOO and then we define
the GST_FOO_API decorator either to export or to import
symbols depending on whether BUILDING_GST_FOO is set or not.
That way external users of each library API automatically
get the import.
https://bugzilla.gnome.org/show_bug.cgi?id=797185
Fixes a configure error with gst-build:
subprojects/gst-plugins-base/meson.build:235:2: ERROR: Fetched variable 'gst_check_dep' in the subproject 'gstreamer' is not a dependency object.
The avg_bitrate is an unsigned int, so the gst_util_uin64_scale() function can't
be used for it, as it expects signed integers for the fraction parts arguments.
https://bugzilla.gnome.org/show_bug.cgi?id=797054
Make our own deprecation marker for libgstcheck,
since the function declaration must contain the
right API export decorator (GST_CHECK_API) and
not the one for GStreamer core.
Don't return a value from a function that doesn't
return a value using the returned value from a
function that also doesn't return a value.
gstbitwriter.h(265): warning C4098: 'gst_bit_writer_align_bytes_unchecked': 'void' function returning a value
