Remove all the bus watch and main loop code from the block_deadlock
test, it's not needed: neither pipeline will ever post an EOS or ERROR
message on the bus, and we're the only ones posting an error, from a
timeout. Might just as well just sleep for a bit and then do whatever
we want to do.
Don't gratuitiously set tcase timeout, just use whatever is the
default (or set via the environment).
Make individual pipeline runs shorter.
Check for valgrind and only do a handful iterations when running
in valgrind, not 100 (each iteration takes about 4s on a core i7).
Make videotestsrc output smaller buffers than the default resolution,
we don't care about the buffer contents here anyway.
Fixes test timeouts when run in valgrind.
On slower systems, or under high system load (e.g. check-valgrind),
the sending_buffers_with_9_gstmemories test would sometimes fail,
because the read call only returns 32 bytes instead of the full
36 bytes expected. This is because multisocketsink might end up
doing a partial write of 32 bytes first, and then write the
missing 4 bytes later, but since we don't wait for all of data
to be written, there's a short window where our read call in the
unit test might then only receive the 32 bytes written so far,
which makes it deeply unhappy.
Instead, make sure we loop to read all bytes.
This test sets a rather short timeout, increase this when
we run under valgrind. Also add a short sleep to the
fakesrc ! fakesink pipeline to avoid thrashing the CPU,
which would often not stop the main loop when it should.
Also fix wrong (0.10) return value from pad probe callback.
In case upstream does not provide videorate with framerate information,
it will detect the current framerate from the buffer it received,
but if downstream forces the use of variable framerate (most probably
through the use of a caps filter with framerate = 0 / 1), videorate will
respect that.
And add some unit tests
https://bugzilla.gnome.org/show_bug.cgi?id=734424
When generating segment, we can't assume the first buffer is actually
the first expected one. If it's not, we need to adjust the segment to
start a bit before.
Additionally, we if don't know when the stream is suppose to have
started (no clock-base in caps), it means we need to keep everything in
running time and only rely on jitterbuffer to synchronize.
https://bugzilla.gnome.org/show_bug.cgi?id=635701
This provides notification that the socket in use was closed by the peer
and gives an opportunity to replace it with a new one which is not
closed, allowing reading from many sockets in order.
I use this in pulsevideo to implement reconnection logic to handle the
pulsevideo service dieing, such that is can be restarted without
disrupting downstream.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=739546
`socketsrc` can be considered a source counterpart to `multisocketsink`.
It can be considered a generalization of `tcpclientsrc` and
`tcpserversrc`: it contains all the logic required to communicate over
the socket but none of the logic for creating the sockets/establishing
the connection in the first place, allowing the user to accomplish this
externally in whatever manner they wish making it applicable to other
types of sockets besides TCP.
This commit essentially copies the implementation directly from
tcpserversrc. Later patches will tidy the implementation up and
re-implement `tcpclientsrc` and `tcpserversrc` in terms of `socketsrc`.
See https://bugzilla.gnome.org/show_bug.cgi?id=739546
If a buffer is made up of non-contiguous `GstMemory`s `gst_buffer_map`
has to copy all the data into a new `GstMemory` which is contiguous. By
mapping all the `GstMemory`s individually and then using scatter-gather
IO we avoid this situation.
This is a preparatory step for adding support to multisocketsink for
sending file descriptors, where a GstBuffer may be made up of several
`GstMemory`s, some of which are backed by a memfd or file, but I think this
patch is valid and useful on its own.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=746150
Should wait state change complete before start another state change.
Can't ensure can received async-done message when state change from PLAYING to PAUSED.
https://bugzilla.gnome.org/show_bug.cgi?id=736655
Don't feed 64-bit integer variable into vararg function that expects
an unsigned integer to go with GST_TAG_TRACK_NUMBER. This would
cause crashes on 32-bit platforms, and if not that then test
failures if the comparisons fail later (at least on big endian
platforms).
Test that a pipeline can change from PLAYING to PAUSED and back in
the following scenarios:
1. One track reach EOS after pushed some buffers while another track
still pushes buffers
2. One track reach EOS without buffers while another track still pushes
buffers
https://bugzilla.gnome.org/show_bug.cgi?id=736655
Allows subclasses to do custom caps query replies.
Also exposes the standard caps query handler so subclasses can just
extend on top of it instead of reimplementing the caps query proxying.
https://bugzilla.gnome.org/show_bug.cgi?id=741263
Refactor the encoder's caps query proxying function to a common place
and use it in the videodecoder to proxy downstream restrictions.
The new function is private to the gstvideo lib.
https://bugzilla.gnome.org/show_bug.cgi?id=741263
The set_format vfunc does not pass ownership of the caps
to the decoder, so we mustn't unref the caps there.
gst_event_new_caps() does not take ownership of the caps
passed, so we must unref the caps afterwards.
Fixes leaks when running test in valgrind in 1.4 branch.
Add test to check rendering of overlays of different sizes
that are completely or partially outside the video surface.
Once the overlay is blended to the video, verify if the
position of the blended overlay is as expected, by comparing
the pixels of the blended video with the expected values.
https://bugzilla.gnome.org/show_bug.cgi?id=739281
Make an ORC version of the 2x vertical upsampling code.
Improve unit tests, test chroma up and down sampling.
memset buffer in conversion to make valgrind happy.
There don't seem to be any unit tests for the socket handling elements. As
I am about to attempt some refactorings I've added some basic tests which
exercise some of the happy-paths in tcpclientsrc, tcpserversrc,
tcpserversink and tcpclientsink. They should let me know if I've caused
serious breakage.
They are far from exhaustive but are sufficient for me to have caught a few
memory-leaks in the existing code.
https://bugzilla.gnome.org/show_bug.cgi?id=739544
Combine multiplies in 4x filters.
Rename conversion functions to make them nicer in orc.
Add ORC versions for various downsampling algorithms
Add unit test chroma resampler
Make a more complete pack/unpack test, check if the image after
pack/unpack has the same color and precision, and has correctly
duplicated subsampled pixels.
Add a video scaler object build on top of the resampler. It has
implementation to deal with interlaced video as well as horizontal and
vertical scaling functions.
Move the conversion code used in videoconvert to the video library
and expose a simple but generic API to do arbitrary conversion. It can
currently do colorspace conversion but the plan is to add videoscale to
it as well.
See https://bugzilla.gnome.org/show_bug.cgi?id=732415
Adds a new test to textoverlay to make sure it can properly handle
elements that have ANY caps but fail to add the overlay meta in
the allocation query.
This test verifies that textoverlay won't use the caps features even
knowing that the overlay meta is accepted when querying the downstream
caps because it also needs downstream to confirm by putting the meta
in the allocation query.
https://bugzilla.gnome.org/show_bug.cgi?id=735800
Make textoverlay negotiate caps more correctly.
1) Check what caps we received in the video-sink
2) If it already has the overlay meta -> use it directly
3) If it doesn't, textoverlay try adding the overlay meta and using it,
if downstream doesn't support it, just use what is received in the
video-sink
4) Check if the allocation query also supports the meta to enable
really using it
Before it wasn't really doing renegotiation of any kind, just
re-checking if it should use the overlay meta or not
Also had to update the caps in the test as memory:SystemMemory seems
to be required when you use a caps feature otherwise intersection/subset
checks will fail.
https://bugzilla.gnome.org/show_bug.cgi?id=733916
Set up a fakesink with a pad probe to replace the missing encoder to detect
if encoding was really required and only error out in this case. Otherwise
just let passthrough branch work.
This delays the error posting from the set_state function to when buffers
are really flowing. Unit test updated accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=650652
Make the MIKEY message and payload objects miniobjects so that they have
a GType and are refcounted.
We can reuse the dispose method to clear our payload objects.
Add some annotations.
Implement a copy function for the MIKEY message.
Fix the unit test.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=732589
With most decoder libraries, and especially when accessing codecs via
OpenMAX or similar APIs, we don't have the ability to properly related
the output buffers to a number of input samples. And could e.g. get
a fractional number of input buffers decoded at a time.
Previously this would in the end lead to an error message and stopped
playback. Change it to a warning message instead and try to handle it
gracefully. In theory the subclass can now get timestamp tracking
wrong if it completely misuses the API, but if on average it behaves
correct (and gst-omx and others do) it will continue to work properly.
Also add a test for the new behaviour.
We don't change it in the encoder yet as that requires more internal logic
changes AFAIU and I'm not aware of a case where this was a problem so far.
Aggregate buffering messages to only post the lower value
to avoid setting pipeline to playing while any multiqueue
is still buffering.
There are 3 scenarios where the entries should be removed from
the list:
1) When decodebin is set to READY
2) When an element posts a 100% buffering (already implemented)
3) When a multiqueue is removed from decodebin.
For item 3 we don't need to handle it because this should only
happen when either 1 is hapenning or when it is playing a
chained file, for which number 2 should have happened for the
previous stream to finish
https://bugzilla.gnome.org/show_bug.cgi?id=726423
