François Laignel
39f0905a7e
Use gst_element_request_pad_simple
...
Instead of the deprecated gst_element_get_request_pad.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/958 >
2021-05-05 06:17:20 +00:00
Jan Schmidt
7c5f2185a9
qtmux: Make sure to write 64-bit STCO table when needed.
...
qtmux attempts to choose between writing a 32-bit stco chunk offset table
when it can, but switch to a 64-bit co64 table when file offsets go over
4GB.
This patch fixes a problem where the atom handling code was checking
mdat-relative offsets instead of the final file offset (computed by
adding the mdat position plus the mdat-relative offset) - leading to
problems where files with a size between 4GB and 4GB+offset-of-the-mdat
would write incorrect STCO tables with some samples having truncated
32-bit offsets.
Smaller files write STCO correctly, larger files would switch to
co64 and also output correctly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/970 >
2021-04-30 08:12:47 +10:00
Guillaume Desmottes
5fa3325335
rtpopuspay: set MARKER flag
...
Set MARKER flag on first buffer after DTX.
According to RFC 3551 section 4.1 the marker bit needs to be set on
"the first packet after a silence period during which packets have
not been transmitted contiguously".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/967 >
2021-04-26 15:25:56 +02:00
Guillaume Desmottes
41ba8c1b00
rtpopuspay: add DTX support
...
If enabled, the payloader won't transmit empty frames.
Can be tested using:
opusenc dtx=true bitrate-type=vbr ! rtpopuspay dtx=true
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/967 >
2021-04-26 15:25:56 +02:00
Havard Graff
d75c678479
rtpjitterbuffer: fix divide-by-zero
...
The estimated packet-duration can sometimes end up as zero, and dividing
by that is never a good idea...
The test reproduces the scenario, and the fix is easy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/966 >
2021-04-25 02:21:04 +02:00
Havard Graff
1368b4214b
rtpjitterbuffer: clean up and improve missing packets handling
...
* Try to make variable and function names more clear.
* Add plenty of comments describing the logic step-by-step.
* Improve the logging around this, making the logs easier to read and
understand when debugging these issues.
* Revise the logic of packets that are actually beyond saving in doing
the following:
1. Do an optimistic estimation of which packets can still arrive.
2. Based on this, find which packets (and duration) are now hopelessly
lost.
3. Issue an immediate lost-event for the hopelessly lost and then add
lost/rtx timers for the ones we still hope to save, meaning that if
they are to arrive, they will not be discarded.
* Revise the use of rtx-delay:
Earlier the rtx-delay would vary, depending on the pts of the latest
packet and the estimated pts of the packet it being issued a RTX for,
but now that we aim to estimate the PTS of the missing packet accurately,
the RTX delay should remain the same for all packets.
Meaning: If the packet have a PTS of X, the delay in asked for a RTX
for this packet is always a constant X + delay, not a variable one.
* Finally ensure that the chaotic "check-for-stall" tests uses timestamps
that starts from 0 to make them easier to debug.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/952 >
2021-04-24 13:53:58 +00:00
Guillaume Desmottes
309269a93b
level: make properties thread-safe
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/962 >
2021-04-23 15:14:44 +02:00
Guillaume Desmottes
f61bd6239a
level: disable passthrough when audio-level-meta is enabled
...
Ensure we receive a writable buffer to add the meta.
Fix #878
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/962 >
2021-04-23 11:41:36 +02:00
Sebastian Dröge
c0d68d03a6
matroskamux: Don't pass a non-GObject pointer to GST_DEBUG_OBJECT and similar
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/964 >
2021-04-23 08:28:06 +03:00
Edward Hervey
4d3b8d1129
rtpjitterbuffer: Avoid generation of invalid timestamps
...
When updating timestamps and timer timeouts with a new offset, make sure that
the resulting value is valid (and not a negative (signed) value which ends up in
a massive (unsigned) value).
Fixes #571
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/960 >
2021-04-22 15:23:13 +02:00
Doug Nazar
b705fb93be
rtspsrc: Fix race saving seek event seqnum.
...
We need to save the seek seqnum before the flush stop event
since that will start the basesrc task which may send the segment
event before we're ready.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/954 >
2021-04-20 06:03:22 +00:00
Doug Nazar
61d4dd0b9b
rtpsbcpay: remove use of packed struct for payload
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/950 >
2021-04-15 07:29:09 -04:00
Doug Nazar
850a6f5f6f
dtmf: convert to bit accessors
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/949 >
2021-04-14 11:13:45 -04:00
Nirbheek Chauhan
c071cbbe30
rtspsrc: Remove some dead code
...
stop is not used after this point, nor do we create a new segment
here since 84725d62b5https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/940 >
2021-04-13 14:30:54 +00:00
Nirbheek Chauhan
fb97ca9458
rtspsrc: Do not overwrite the known duration after a seek
...
This breaks the duration query and also the seeking query.
Broke in 5f1a732bc7https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/940 >
2021-04-13 14:30:54 +00:00
Nirbheek Chauhan
99ee5fb2d9
rtspsrc: Just assign the segment instead of memcpy
...
Assignments copy by value, we don't need to memcpy...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/940 >
2021-04-13 14:30:54 +00:00
Sebastian Dröge
52ead086d9
rtpjitterbuffer: Check srcresult before waiting on the condition variable too
...
It might've been set to FLUSHING between the last check and the waiting,
and in that case we'd be waiting here forever now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/944 >
2021-04-13 12:30:49 +00:00
Doug Nazar
b5deff7b64
rtp: fix rtptwcc to support big endian.
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/942 >
2021-04-13 11:35:15 +00:00
Doug Nazar
7918f80a43
rtp: fix rtphdrextrfc6464 to support big endian.
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/942 >
2021-04-13 11:35:15 +00:00
Jan Schmidt
fae29cb3c2
qtmux: Protect against writing absurd sample durations
...
If the input DTS goes backward or is missing, the calculated
sample duration goes negative and wraps around to a very big
number. In that case, just write a sample with a duration of
0 and hope the problem is transient.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/914 >
2021-04-13 00:18:36 +10:00
Nirbheek Chauhan
590fbb4ddd
rtspsrc: De-dup seek event seqnums to avoid multiple seeks
...
Seek events are sent upstream on each sink, so if we receive multiple
seeks with the same seqnum, we must only perform one seek, not N seeks
where N = the number of sinks in the pipeline connected to rtspsrc.
This is the same thing done by demuxers like qtdemux or matrsokademux.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/938 >
2021-04-12 03:32:08 +00:00
Nirbheek Chauhan
57e4eab72d
rtspsrc: Using multicast UDP has no relation to seekability
...
The transport has no relation to whether a media can be seeked. The
range response having a duration is the correct thing to check for.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/939 >
2021-04-12 02:56:44 +00:00
Nirbheek Chauhan
b1dcbf393b
rtspsrc: Add more logging for range parsing and seekable
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/939 >
2021-04-12 02:56:44 +00:00
Markus Ebner
7276b0f9d1
videocrop: Add support for GBR* video formats
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/515 >
2021-04-10 11:26:59 +00:00
Markus Ebner
e31cbce4d5
videocrop: Added support for planar pixel formats > 8bits
...
- Added support for planar pixel formats with depths greater than 8bits
to transform_planar implementation
- Added a whole lot of new pixel formats to the support-list
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/515 >
2021-04-10 11:26:59 +00:00
Markus Ebner
3ba8abb056
videocrop: Move supported format list into private header
...
- Moved declaration of supported pixel formats to private header, which
can be shared between videocrop and aspectvideocrop
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/515 >
2021-04-10 11:26:59 +00:00
Nirbheek Chauhan
c8827acb93
rtpjitterbuffer: More logging when calculating rfc7273 timestamps
...
This code can be fragile, since it is very exacting in the timestamps
that it will accept. Add more logging so it's easier to debug issues
and figure out whether it's a bug in the calculation or something
wrong in the incoming buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/934 >
2021-04-09 12:48:02 +05:30
Stéphane Cerveau
0935c7efbb
rtp: missing debug init after element splitting
...
- h264depay
- h265depay
- sv3vdepay
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/936 >
2021-04-08 14:02:46 +02:00
Michal Dzik
8e8b22174d
rtp: rename gst_rtp_sbc_pay_flush_buffers()
...
gst_rtp_sbc_pay_flush_buffers() is a misleading name. A better name would
be gst_rtp_sbc_pay_drain_buffers(), because that's what it does, it drains
any leftover queued data and pushes it downstream. "Flushing" in GStreamer
typically means to throw away any queued data and not process/push it
downstream.
Signed-off-by: Michal Dzik <michal.dzik@streamunlimited.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/700 >
2021-04-08 08:46:34 +00:00
Michal Dzik
680722bbfa
rtp: fix adapter flushing in sbc payloader
...
GstAdapter must be flushed in some cases (flush, new segment, state change)
Without it, it may, for example, push some leftover buffer from old
segment in new segment. This, in general, breaks timestamps.
See GstAdapter documentation for more.
Signed-off-by: Michal Dzik <michal.dzik@streamunlimited.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/700 >
2021-04-08 08:46:34 +00:00
Vivia Nikolaidou
5f783647a0
matroskademux: Take segment stop into account when need_segment
...
Otherwise, in the case of e.g. a deferred seek event, the segment stop
would be replaced with GST_CLOCK_TIME_NONE.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/929 >
2021-03-31 15:13:58 +00:00
Stéphane Cerveau
24c03454e3
y4m: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
8ef56e529f
wavparse: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
136de010bb
wavenc: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
41f7a88f6b
spectrum: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
7bfcfd660f
monoscope: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
2ba958555f
imagefreeze: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
3347e1786f
id3demux: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
6db40c9140
icydemux: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
7cc7518b19
goom2k1: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
30fc194540
cutter: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
ebf9b886f7
goom: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
213753b9d8
deinterlace: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
8dedf47997
auparse: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
7cd54ccfc1
videofilter: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
8f1384c977
videocrop: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
1eabad6d80
videobox: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
72c7ae54dd
udp: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
0ea8c2e3a1
smpte: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
Stéphane Cerveau
084c01dd5a
shapewipe: allow per feature registration
...
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.
More details here:
https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876 >
2021-03-29 12:45:23 +02:00
