Mark Nauwelaerts
1dfcc3227c
flvdemux: conduct index scan in task thread
...
... rather than in seeking thread, which might then occupy mainloop
for some time with possible unresponsive side-effects.
2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
f23fb39bc7
flvdemux: avoid indefinite index growth
...
That is, check for and do not add an index entry that has already
been added.
2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
f79de81bb4
flvdemux: also collect index info on-the-fly in pull mode
2010-03-10 11:48:07 +01:00
Mark Nauwelaerts
86a1aec2c0
flvdemux: incrementally build index in pull mode
...
Scan for needed part upon a seek as opposed to doing a complete scan
at startup, which may take some time depending on file and/or platform.
Also accept index metadata in pull mode and peek for some metadata
at the end of the file when deemed appropriate.
2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
66fabd8bfd
flvdemux: some more variable cleanup
2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
122daaf6af
flvdemux: refactor adding index entry
2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
6aa4d5df2d
flvdemux: fix setting DELTA_UNIT flag on outgoing buffers
...
... which should not depend on having index available or not.
Also refactor resulting collapsed code.
2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
561a506822
qtdemux: avoid erroneous codec-data overriding of stsd information
2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
4abf31067f
speexdec: adapt to new oggdemux
...
Remove all granulepos hacks and simply use upstream timestamps.
2010-03-10 11:48:06 +01:00
Mark Nauwelaerts
972ce3006b
speexdec: refactor granulepos hacks
2010-03-10 11:48:06 +01:00
Wim Taymans
821096c4f1
rtspsrc: parse connection information
...
Parse the connection information from the SDP and use it to figure out if we are
dealing with ipv4 or ipv6 connections.
2010-03-10 11:28:22 +01:00
Wim Taymans
8eb5c2c794
rtspsrc: require a destination for multicast
...
When setting up the multicast sockets, we need a destination address to listen
on or else we error.
2010-03-10 11:21:20 +01:00
Wim Taymans
574447b092
rtspsrc: handle ipv6 listening ports when needed
...
Add some code to make udpsrc listen on an ipv6 address when needed. The
detection of IPV6 is not yet implemented.
2010-03-10 11:21:20 +01:00
Wim Taymans
455f53c896
udp: use uri parsing code
...
Use the uri parsing helper functions to manage the host and port pairs. This
adds support for IPV6.
2010-03-10 11:21:19 +01:00
Wim Taymans
14ae2080d2
udpnetutils: add helper functions for udp uri handling
...
Add some helpers to parse udp uris. Make sure IPV6 is supported too.
2010-03-10 11:21:19 +01:00
Olivier Crête
a6dfe96169
rtpsession: Make it possible to favor new sources in case of SSRC conflict
...
Add a "favor-new" property that tells the session to favor new sources when
there is a SSRC conflict. This is useful for SIP calls and other such cases
where a remote loop is extremely unlikely.
Fixes #607615
2010-03-10 11:21:19 +01:00
Olivier Crête
f336ea283f
rtpsession: Move SSRC conflicts lists into RTPSource
...
We will also need to track SSRC conflicts in remote sources.
See #607615
2010-03-10 11:21:18 +01:00
Wim Taymans
38f2b4735d
rtspsrc: send keep alive when paused
...
When we are paused, send keep alive messages to the server so that our session
doesn't time out when we go back to playing later.
2010-03-10 11:21:18 +01:00
Tim-Philipp Müller
8599aff951
Automatic update of common submodule
...
From 7aa65b5 to 7cc5eb4
2010-03-10 01:10:07 +00:00
David Schleef
acb6ebbc9a
multifilesink: Add key-frame option to next-file
...
This allows segmenting of MPEG-TS files at key frames, which is
exactly what is needed for Apple's HTTP streaming.
2010-03-09 13:52:30 -08:00
Sebastian Dröge
e31922913f
Automatic update of common submodule
...
From 44ecce7 to 7aa65b5
2010-03-09 21:32:47 +00:00
Sebastian Dröge
42ff597f41
videobox: Fix autocropping for odd width/height differences
2010-03-09 21:03:18 +00:00
Sebastian Dröge
1819fcb4a5
videobox: Use libgstvideo for format specific stuff
2010-03-09 21:03:18 +00:00
Sebastian Dröge
79e720052a
audiofx: Sync properties to the stream time
2010-03-09 21:03:18 +00:00
Sebastian Dröge
4381b9296f
videobox: Make properties controllable
2010-03-09 21:03:18 +00:00
Sebastian Dröge
7dcb294b54
videobox: Some cleanup
2010-03-09 21:03:18 +00:00
Sebastian Dröge
f8b7308c21
effectv: Use controller where possible, optimize a bit and make properties threadsafe
2010-03-09 21:03:18 +00:00
Sebastian Dröge
ca6566ea66
build: Make some more rules silent if requested
2010-03-09 21:03:18 +00:00
Sebastian Dröge
3e2e82afef
configure: Use automake 1.11 silent rules instead of shave if available
...
This makes sure that we use something that is still maintained and
also brings back libtool 1.5 support.
2010-03-09 21:03:18 +00:00
Benjamin Otte
2a5f368bc7
png: fractions don't allow doubles
2010-03-09 19:15:07 +01:00
Benjamin Otte
b5a3b9cb1c
flx: fix description
...
It's video, not audio
2010-03-09 19:15:07 +01:00
Tim-Philipp Müller
5d07a2c88f
Back to development
2010-03-09 17:45:27 +00:00
Tim-Philipp Müller
e39295317b
Release 0.10.21
2010-03-09 00:28:16 +00:00
Tim-Philipp Müller
e75942876b
Update .po files
2010-03-09 00:24:45 +00:00
Tim-Philipp Müller
8127670c86
Revert "Add 4:2:2, 4:1:1, and 4:4:4 output support"
...
This reverts commit 637c26f61a
.
2010-03-09 00:09:34 +00:00
Tim-Philipp Müller
01b6861527
Release 0.10.20
2010-03-08 23:42:51 +00:00
Tim-Philipp Müller
e83ecaa368
Update .po files
2010-03-08 23:42:06 +00:00
Tim-Philipp Müller
de56a874ae
flacdec: don't send second newsegment event in framed mode, fixes long playback delay
...
Don't send another newsegment event if the upstream muxer/parser has already
sent one (otherwise the sink will wait for $duration before starting playback).
Fixes long delay until playback starts with flac-in-ogg files.
Fixes #610959 .
2010-03-08 17:10:31 +00:00
Wim Taymans
66709a7a68
rtspsrc: configure multicast correctly
...
Take the transport destination for multicast.
Disable loop and autojoin for multicast on the udpsinks.
2010-03-08 17:48:46 +01:00
Wim Taymans
83a0c73dc0
multicast: always configure loop and ttl
...
Also configure TTL and loop parameters when we add a client after initializing
the sender.
2010-03-08 17:48:37 +01:00
Wim Taymans
cabe01ef95
Revert "rtph263depay: baseclass handles timestamps for us"
...
This reverts commit 564581e1b8
.
If we don't call push_ts, there will be no timestamp at all on the outgoing
buffer.
Fixes #612154
2010-03-08 17:48:27 +01:00
Benjamin M. Schwartz
637c26f61a
Add 4:2:2, 4:1:1, and 4:4:4 output support
2010-03-08 17:48:11 +01:00
Wim Taymans
529f443a61
rtpsource: use payload size to estimate bitrate
...
Use the length of the payload for estimating the receiver bitrate so that it
matches the calculations done on the sender side. Together with the number of
packets one can scale the bitrate with the header overhead of the lower
transport.
2010-03-08 17:48:04 +01:00
Wim Taymans
c971d1a9ab
rtpsource: refactor bitrate estimation
...
Don't reuse the same variable we need for stats for the bitrate estimation
because we're updating it.
Refactor the bitrate estimation code so that both sender and receivers use the
same code path.
2010-03-08 17:48:00 +01:00
Tristan Matthews
a0a6d4ff3b
added bitrate estimation to receiver-side stats, fixes #611213
2010-03-08 17:47:55 +01:00
Wim Taymans
968c981e74
h263pay: fix typo in debug
2010-03-08 17:47:14 +01:00
Tim-Philipp Müller
4379378239
Release 0.10.19
2010-03-06 00:43:03 +00:00
Tim-Philipp Müller
bcad939757
Update .po files
2010-03-06 00:42:09 +00:00
Tim-Philipp Müller
552d6b703d
0.18.4 pre-release
2010-03-03 20:29:30 +00:00
Edward Hervey
869ff4263f
matroskademux: Make sure we don't send invalid newsegments
...
Fixes #611501
2010-03-02 21:20:45 +01:00