Original commit message from CVS:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_subbuffer):
Add sanity check so we don't abort for broken or non-MPEG streams,
but instead error out. Fixes crashes/aborts for when our typefinder
wrongly identifies quicktime files as mpeg (which should be fixed in
-base now too). (#440120).
Original commit message from CVS:
Based on patch by: Mark Nauwelaerts <manauw skynet be>
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_process_event), (gst_mpeg_streams_reset_last_flow):
* gst/mpegstream/gstmpegdemux.h:
Reset last_flow values for the various streams after a flushing
seek, otherwise we might aggregate wrong flow returns afterwards
that will make upstream pause silently. This should fix seeking
in DVDs and also fix the Thoggen cropping dialog (#438610).
Original commit message from CVS:
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_base_init),
(gst_dvd_demux_class_init), (gst_dvd_demux_combine_flows),
(gst_dvd_demux_send_subbuffer):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_init_stream), (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes), (gst_mpeg_demux_combine_flows),
(gst_mpeg_demux_send_subbuffer):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_process_event),
(gst_mpeg_parse_chain):
Fix flow value combination; this fixes playbin/totem locking up if
a VobSub file is specified as subtitle file (#334322). Flow value
combination should only happen once we are fairly sure we've got all
pads that are available for now. Since there isn't a well-specified
time when this is the case in MPEG, we'll just assume this is the
case once there has been a certain number of packets for each
stream we've found so far.
Original commit message from CVS:
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_sink_event),
(gst_asf_demux_setup_pad), (gst_asf_demux_process_segment):
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream),
(gst_mpeg_demux_get_private_stream):
Active pads before adding them to the running element. Don't assert
on non-BYTE format newsegment events in asfdemux.
Original commit message from CVS:
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_change_state):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_change_state):
* gst/mpegstream/gstrfc2250enc.c: (gst_rfc2250_enc_change_state):
Do state changes correctly
Original commit message from CVS:
* ext/mad/gstmad.c: (index_seek):
move GstIndexEntry *entry variable declaration before
the first instruction
* ext/mad/gstmad.c:
remove debug macros with variable number of parameter by using
GST_DEBUG for WIN32
* gst/dvdsub/gstdvdsubdec.c: (gst_dvd_sub_dec_parse_subpic):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_sync_stream_to_time):
replace __FUNCTION__ which is not supported by MSVC by the current function name
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_reset):
remove LL suffix by using G_GINT64_CONSTANT
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead),(gst_mpeg_parse_get_rate):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegparse.h:
remove LL suffix by using G_GINT64_CONSTANT
* win32/vs6:
add project files for tagac3parse, asfdemux, dvdlpcmdec, dvdsub, iec958, lame,
mad, mpegaudioparse, mpegstream, realmedia, synaesthesia
Original commit message from CVS:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_subbuffer):
Don't ref NULL caps (private streams have NULL caps) (#336387);
also, no need to set caps on the same buffer twice.
Original commit message from CVS:
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream):
* gst/mpegstream/gstmpegdemux.c:
(gst_mpeg_demux_sync_stream_to_time):
Don't leak element and pad names in error messages, use
GST_DEBUG_PAD_NAME instead. Add some more debug code.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at xeris dot cz>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_init),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes),
(gst_mpeg_demux_send_subbuffer), (gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead):
Timestamps in mpeg stream are 32-bit numbers. Therefore, with a
clock_freq of 90kHz this timestamp overflows every ~13 hours. This
situation really happens when grabbing DVB streams. Current
mpegdemuxer can not handle this situation correctly and it
restarts counting gstreamer timestamps from zero.
Fixes#326598.
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_get_type):
Remove lingering reference to GstID3Demux
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_pes):
Don't output debug saying padding streams are unknown type,
because they're not
Original commit message from CVS:
2005-12-27 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstdvddemux.c (AUDIO_CAPS)
(gst_dvd_demux_get_audio_stream): Use audio/x-lpcm as mimetype for
LPCM.
* gstmpegdemux.h:
* gstmpegdemux.c (gst_mpeg_demux_get_video_stream)
(gst_mpeg_demux_get_audio_stream):
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_get_video_stream)
(gst_dvd_demux_get_audio_stream)
(gst_dvd_demux_get_subpicture_stream)
(gst_dvd_demux_send_subbuffer):
Send current* pad buffers with appropriate caps.
Original commit message from CVS:
2005-12-19 Martin Soto <martinsoto@users.sourceforge.net>
Big mpegparse clean up, second round:
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_dvd_event):
Send and EOS event down the audio pipeline when an still frame
event arrives. This prevents the pipeline from locking when a
still menu comes directly after a flush.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_reset):
Don't send a newsegment in reset.
(gst_mpeg_parse_adjust_ts): Check for invalid timestamps.
(gst_mpeg_parse_handle_newsegment, gst_mpeg_parse_process_event):
Move the code of handle_newsegment to process_event. Send a
NEWSEGMENT after FLUSH_STOP.
(gst_mpeg_parse_change_state): Send a NEWSEGMENT right after
moving to PAUSED.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_send_event)
(gst_mpeg_demux_class_init): Don't override send_event.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_init)
(gst_mpeg_demux_send_event, gst_mpeg_demux_send_subbuffer)
(gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h: Get rid of just_flushed
attribute.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_process_event):
Reset the mpegparse element after a flush.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_handle_newsegment):
Don't forward events.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_process_event):
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass):
handle_newsegment is not a virtual method anymore.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_send_newsegment)
(gst_mpeg_parse_reset, gst_mpeg_parse_class_init):
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass): Get
rid of send_newsegment virtual method.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_process_event): Only
handle DVD events and call the superclass method for other event
types.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_send_event): Don't
override process_event anymore.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_event)
(gst_mpeg_parse_process_event): Move actual event processing to
process event so that subclasses can properly override or extend
it.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass):
Eliminate time parameter in process event.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_init)
(gst_mpeg_demux_parse_packet, gst_mpeg_demux_parse_pes)
(gst_mpeg_demux_send_subbuffer):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_class_init)
(gst_mpeg_parse_parse_packhead, gst_mpeg_parse_event)
(gst_mpeg_parse_chain): Use the new adjust_ts method instead of
adding the value of the adjust attribute.
* gst/mpegstream/gstmpegdemux.h (struct _GstMPEGVideoStream): Get
rid of the adjust attribute. Now all timestamp adjustments are
performed by mpegparse using the current segment.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_adjust_ts)
(gst_mpeg_parse_class_init): Implement the adjust_ts method based
on the adjust attribute for SCR values and the current segment.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass): New
adjust_ts virtual method to adjust timestamps for outgoing
buffers.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_send_newsegment)
(gst_mpeg_demux_parse_packet): Don't override send_newsegment.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_class_init)
(gst_dvd_demux_handle_newsegment): Don't override
handle_newsegment.
(gst_dvd_demux_process_event, gst_dvd_demux_handle_dvd_event):
Check for DVD events in process_event instead of
handle_dvd_event.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_handle_newsegment)
(gst_mpeg_parse_send_newsegment, gst_mpeg_parse_send_event):
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_process_event)
(gst_mpeg_demux_send_event):
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_process_event)
(gst_dvd_demux_handle_dvd_event):
Eliminate the time parameter in send_event.
Original commit message from CVS:
2005-12-08 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_newsegment):
Properly handle non contiguous VOBUs by adding the segment accum
field to the adjust value.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_class_init)
(gst_dvd_demux_init, gst_dvd_demux_handle_newsegment): Extend
handle_newsegment to prevent sending actual newsegment events and
use tiemstamp rewriting instead.
(gst_dvd_demux_handle_dvd_event): Don't send a newsegment after
dvd-lang-codes.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_handle_newsegment)
(gst_mpeg_parse_event):
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass):
Add a new parameter to handle_newsegment to allow controlling
whether newsegment events are forwarded or not.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_init)
(gst_dvd_demux_handle_dvd_event, gst_dvd_demux_send_subbuffer)
(gst_dvd_demux_reset):
last_end_ptm and discont_time aren't necessary anymore, since
timestamp adjustment is now replaced by newsegment events.
(gst_dvd_demux_init): Prevent MPEGParse from adjusting
timestamps.
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_dvd_event):
Don't handle dvd-nav-packet events anymore, since the are now
replaced by standard newsegment events.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_init)
(gst_dvd_demux_handle_dvd_event, gst_dvd_demux_send_subbuffer)
(gst_dvd_demux_change_state):
* gst/mpegstream/gstdvddemux.h:
Get rid of the ignore_next_newmedia_discont hack.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_class_init)
(gst_dvd_demux_handle_newsegment):
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_class_init)
(gst_mpeg_demux_handle_newsegment): Don't override
handle_newsegment anymore. It was only necessary to handle
NEWMEDIA events.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_process_event)
(gst_dvd_demux_handle_dvd_event, gst_dvd_demux_set_cur_audio)
(gst_dvd_demux_set_cur_subpicture):
Reactivate handling of DVD events.
* gst/mpegstream/gstmpegparse.c (normal_seek)
(gst_mpeg_parse_handle_src_event)
(gst_mpeg_parse_handle_src_query):
First attempt at reenabling seek.
* gst/mpegstream/gstmpegparse.h:
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_init)
(gst_mpeg_parse_update_streaminfo)
(gst_mpeg_parse_get_rate)
(gst_mpeg_parse_convert, gst_mpeg_parse_get_src_query_types)
(gst_mpeg_parse_handle_src_query):
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_new_output_pad):
Make queries work again.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_reset)
(gst_mpeg_parse_handle_newsegment)
(gst_mpeg_parse_send_newsegment, gst_mpeg_parse_pad_added)
(gst_mpeg_parse_chain, gst_mpeg_parse_handle_src_event):
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
Get rid of the newsegment_pending attribute, and rely instead on
proper timestamp adjustment.
* gst/mpegstream/gstmpegparse.c
(gst_mpeg_parse_get_src_event_masks): Erase.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_init):
Initialize fields before creating pads to prevent the pad creation
callback from failing.
(gst_mpeg_parse_reset): Initialize new fields, and change
initialization order to match the order in the structure.
(gst_mpeg_parse_handle_newsegment): Forward new segment events
whenever possible, and update the current segment.
(gst_mpeg_parse_send_newsegment): Update the current segment and
pending_newsegment.
(gst_mpeg_parse_pad_added): Use the current segment to send
newsegment events to new pads.
(gst_mpeg_parse_chain): Properly add adjust time to sent buffers
and events. Properly update newsegment_pending.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
New fields do_adjust and current_segment.
* gst/mpegstream/gstmpegdemux.c:
* gst/mpegstream/gstdvddemux.c:
* gst/mpegstream/gstmpegparse.h:
Rename handle_discont virtual method to handle_newsegment. Erase
some (already commented out support) for old NEW_MEDIA events.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_init)
(gst_mpeg_parse_reset, gst_mpeg_parse_handle_discont)
(gst_mpeg_parse_pad_added, gst_mpeg_parse_parse_packhead)
(gst_mpeg_parse_event, gst_mpeg_parse_chain):
Erase the "pending_scr" field, and replace it by a slightly
different handling of the current SCR. Document code blocks in
parse_packhead and chain.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_event):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_send_newsegment),
(gst_mpeg_parse_send_event):
Ref events before sending them to multiple pads, after all
gst_pad_send_event() takes ownership of events. Don't leak
events that have not been handled (fixes#322745).
Original commit message from CVS:
2005-11-28 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_dvd_event)
(gst_dvd_demux_handle_dvd_event): Erase code to prevent mpegparse
from making timestamp adjustments. This will have to be re-added
in some form in the near future, but in order to do that, some nav
packet parsing will be necessary in mpegdemux.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_init)
(g_value_set_int, gst_mpeg_parse_set_property)
Get rid of do_adjust and use_adjust. Rename max_discont to
max_src_gap.
(gst_mpeg_parse_parse_packhead): When max_scr_gap has a value of
-1, no adjustment is made.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_class_init):
Rename max_discont property to max_scr_gap. Erase "adjust"
property.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_send_event): Don't
override send_event anymore, base class does the job.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_send_event):
Base class now does most of the work.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_send_event):
Generalize to forwarding the event to all source pads in the
element.
* gst/mpegstream/gstmpegparse.h:
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_class_init)
(gst_mpeg_parse_init, gst_mpeg_parse_set_clock)
(gst_mpeg_parse_chain, gst_mpeg_parse_get_property)
(gst_mpeg_parse_set_property):
Clock synchronization doesn't make sense anymore for a
demultiplexer.
Original commit message from CVS:
2005-11-23 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_class_init)
(gst_mpeg_parse_handle_discont, gst_mpeg_parse_send_newsegment)
(gst_mpeg_parse_chain):
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_class_init)
(gst_mpeg_demux_send_newsegment):
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_send_subbuffer):
* gst/mpegstream/gstmpegparse.h:
Rename send_discont method to send_newsegment and add parameters
to handle actual segments. Adapt code all around to run with the
new name and signature.
* gst/mpegstream/gstmpegdemux.c:
* gst/mpegstream/gstmpegparse.c:
* gst/mpegstream/gstdvddemux.c:
Convert to GST_BOILERPLATE.
Original commit message from CVS:
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_process_event):
Filler events have beem removed for now.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_slice),
(gst_mpeg2dec_sink_event):
Set DELTA_UNIT flag on outgoing buffers if this is NOT a keyframe;
nice-ify debug message in event handler; add CHECKME.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event),
(gst_dvd_demux_send_event), (gst_dvd_demux_process_private),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset),
(gst_dvd_demux_sync_stream_to_time):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_process_event), (gst_mpeg_demux_send_event),
(gst_mpeg_demux_handle_discont), (gst_mpeg_demux_new_output_pad),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes),
(gst_mpeg_demux_send_subbuffer), (gst_mpeg_demux_process_private),
(gst_mpeg_demux_sync_stream_to_time),
(gst_mpeg_demux_handle_src_event), (gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_send_buffer),
(gst_mpeg_parse_process_event), (gst_mpeg_parse_send_discont),
(gst_mpeg_parse_send_event), (gst_mpeg_parse_event),
(gst_mpeg_parse_chain):
* gst/mpegstream/gstmpegparse.h:
Get rid of GST_PAD_IS_USABLE and fix GstFlowReturn vs. gboolean
return value confusion (gst_pad_push vs. gst_pad_send_event and
gst_pad_push_event); pass flow return values to caller;
miscellaneous fixes and clean-ups.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c:
Don't send things to NULL PAD_PEERs
* gst/deinterlace/gstdeinterlace.c: (gst_deinterlace_chain):
Copy-on-write the incoming buffer.
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegclock.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead),
(normal_seek), (gst_mpeg_demux_handle_src_event):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegpacketize.h:
* gst/mpegstream/gstmpegparse.c:
(gst_mpeg_parse_update_streaminfo), (gst_mpeg_parse_reset),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead),
(gst_mpeg_parse_loop), (gst_mpeg_parse_get_rate),
(gst_mpeg_parse_convert_src), (gst_mpeg_parse_handle_src_query),
(gst_mpeg_parse_handle_src_event), (gst_mpeg_parse_change_state):
* gst/mpegstream/gstmpegparse.h:
* gst/mpegstream/gstrfc2250enc.h:
Various changes to the way time is computed that make seeking and
total time estimation much better here.
Use G_BEGIN/END_DECLS instead of __cplusplus
* gst/videocrop/gstvideocrop.c: (gst_video_crop_chain):
Use gst_buffer_stamp instead of only copying the TIMESTAMP
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_push),
(gst_a52dec_handle_event), (gst_a52dec_chain):
Add some debug output. Check that a discont has a valid
time associated.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop):
Ignore TAG events. A little extra debug for broken timestamps.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_init), (dvdnavsrc_loop),
(dvdnavsrc_change_state):
Ensure we send a discont to engage the link before we send any
other events.
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_init),
(dvdreadsrc_finalize), (_close), (_open), (_seek_title),
(_seek_chapter), (seek_sector), (dvdreadsrc_get),
(dvdreadsrc_uri_get_uri), (dvdreadsrc_uri_set_uri):
Handle URI of the form dvd://title[,chapter[,angle]]. Currently only
dvd://title works in totem because typefinding sends a seek that ends
up going back to chapter 1 regardless.
* ext/mpeg2dec/gstmpeg2dec.c:
* ext/mpeg2dec/gstmpeg2dec.h:
Output correct timestamps and handle disconts.
* ext/ogg/gstoggdemux.c: (get_relative):
Small guard against a null dereference.
* ext/pango/gsttextoverlay.c: (gst_textoverlay_finalize),
(gst_textoverlay_set_property):
Free memory when done. Don't call gst_event_filler_get_duration on
EOS events. Use GST_LOG and GST_WARNING instead of g_message and
g_warning.
* ext/smoothwave/gstsmoothwave.c: (gst_smoothwave_init),
(draw_line), (gst_smoothwave_dispose), (gst_sw_sinklink),
(gst_sw_srclink), (gst_smoothwave_chain):
Draw solid lines, prettier colours.
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_init):
Add a default palette that'll work for some movies.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_init),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_send_discont),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset):
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_discont),
(gst_mpeg_demux_parse_syshead), (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead):
* gst/mpegstream/gstmpegparse.h:
Use PTM/NAV events when for timestamp adjustment when connected to
dvdnavsrc. Don't use many discont events where one suffices.
* gst/playback/gstplaybasebin.c: (group_destroy),
(gen_preroll_element), (gst_play_base_bin_add_element):
* gst/playback/gstplaybasebin.h:
Make sure we remove subtitles from the same bin we put them in.
* gst/subparse/gstsubparse.c: (convert_encoding), (parse_subrip),
(gst_subparse_buffer_format_autodetect),
(gst_subparse_change_state):
Fix some memleaks and invalid accesses.
* gst/typefind/gsttypefindfunctions.c: (ogganx_type_find),
(oggskel_type_find), (cmml_type_find), (plugin_init):
Some typefind functions for Annodex v3.0 files
* gst/wavparse/gstwavparse.h:
GstRiffReadClass is the correct parent class.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_class_init),
(gst_dvd_demux_handle_discont):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_handle_discont):
Recreate pads on new-media (#160730).
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_new_pad):
Send discont even if manager changes timestamps (#161929).
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_class_init),
(gst_dvd_demux_reset), (gst_dvd_demux_change_state):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_reset),
(gst_mpeg_demux_change_state):
Reset on ready. Fixes 160276.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_class_init),
(dvdreadsrc_init), (dvdreadsrc_dispose), (dvdreadsrc_set_property),
(dvdreadsrc_get_property), (_open), (_seek), (_read),
(dvdreadsrc_get), (dvdreadsrc_open_file),
(dvdreadsrc_change_state):
Fix. Don't do one big huge loop around the whole DVD, that will
cache all data and thus eat sizeof(dvd) (several GB) before we
see something.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Actually NULL'ify event after using it.
* gst/matroska/ebml-read.c: (gst_ebml_read_use_event),
(gst_ebml_read_handle_event), (gst_ebml_read_element_id),
(gst_ebml_read_element_length), (gst_ebml_read_element_data),
(gst_ebml_read_seek), (gst_ebml_read_skip):
Handle events.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_base_init),
(gst_dvd_demux_init), (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream), (gst_dvd_demux_plugin_init):
Fix timing (this will probably break if I seek using menus, but
I didn't get there yet). VOBs and normal DVDs should now work.
Add a mpeg2-only pad with high rank so this get autoplugged for
MPEG-2 movies.
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_base_init),
(gst_mpeg_demux_class_init), (gst_mpeg_demux_init),
(gst_mpeg_demux_new_output_pad), (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream),
(gst_mpeg_demux_get_private_stream), (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes), (gst_mpeg_demux_plugin_init):
Use this as second rank for MPEG-1 and MPEG-2. Still use this for
MPEG-1 but use dvddemux for MPEG-2.
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_class_init),
(gst_mpeg_parse_init), (gst_mpeg_parse_new_pad),
(gst_mpeg_parse_parse_packhead):
Timing. Only add pad template if it exists. Add sink template from
class and not from ourselves. This means we will always use the
correct sink template even if it is not the one defined in this
file.
Original commit message from CVS:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead):
Fix playback of mpeg again, timestamps where screwed up by
patch 1.61.
Original commit message from CVS:
* ext/dvdnav/README:
Update the README to use dvddemux
* ext/gdk_pixbuf/pixbufscale.c: (gst_pixbufscale_getcaps):
Ensure getcaps returns a subset of the template caps
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_base_init),
(gst_mpeg2subt_init):
Ensure getcaps returns a subset of the template caps
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_class_init),
(gst_dvd_demux_init), (gst_dvd_demux_get_video_stream),
(gst_dvd_demux_get_subpicture_stream),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_set_cur_subpicture):
* gst/mpegstream/gstdvddemux.h:
Set the explicit caps on the current_video pad before pushing
anything
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream):
Free caps used to gst_pad_set_explicit_caps, which takes a const
GstCaps *
Original commit message from CVS:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream),
(gst_mpeg_demux_process_private):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_send_data):
Check for error codes from the negotiation functions. Make sure
we really set the pad caps when a new pad is created.
Original commit message from CVS:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_new_output_pad),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_process_private):
Add pad to element *after* setting the pad functions so that
the scheduler can use the correct ones.
Original commit message from CVS:
* ext/gnomevfs/gstgnomevfssrc.c: (gst_gnomevfssrc_dispose):
actually free the URI string
* ext/mad/gstid3tag.c: (gst_id3_tag_src_event):
compute offset correctly when passing discont events
* ext/mad/gstid3tag.c: (gst_id3_tag_handle_event):
don't leak discont events
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_video_caps):
add some missing breaks so caps aren't copied randomly
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_get_video_stream):
if we realloc memory, we better use it
Original commit message from CVS:
a52dec: Use a debug category, Output timestamps correctly
Emit tag info, Handle events, tell liba52dec about cpu
capabilities so it can use MMX etc.
dvdec: Fix a crasher accessing invalid memory
dvdnavsrc:Some support for byte-format seeking.
Small fixes for still frames and menu button overlays
mpeg2dec: Use a debug category. Adjust the report level of several items to
LOG. Call mpeg2_custom_fbuf to mark our buffers as 'custom buffers'
so it doesn't lose the GstBuffer pointer
navseek: Add the navseek debug element for seeking back and forth in a
video stream using arrow keys.
mpeg2subt:Pretty much a complete rewrite. Now a loopbased element. May still
require work to properly synchronise subtitle buffers.
mpegdemux:
dvddemux: Don't attempt to create subbuffers of size 0
Reduce a couple of error outputs to warnings.
y4mencode:Output the y4m frame header correctly
Original commit message from CVS:
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_private):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes):
get rid of non-standard "..." ranges in case statements.
Original commit message from CVS:
* gst/mpegstream/gstmpegdemux.c:
* gst/mpegstream/gstmpegdemux.h: Complete overhaul. All DVD
specific functionality split to the new dvddemux element.
* gst/mpegstream/gstdvddemux.c:
* gst/mpegstream/gstdvddemux.h: New demultiplexer for DVD (VOB)
streams, derived from mpegdemux.
* gst/mpegstream/gstmpegparse.c: Discontinuity handling cleaned
up. SCR based timestamp rewriting can be turned off (will probably
completely disappear soon).
* ext/dvdnav/dvdnavsrc.c: Changes resulting from a few months
hacking. General cleanup. All printf statements replaced by
debugging messages. Almost complete libdvdnav support.
(dvdnavsrc_class_init): Got rid of unnecessary signals (replaced
by events. New properties for audio and subpicture languages.
(dvdnavsrc_update_highlight): Now uses events.
(dvdnavsrc_user_op): Cleaned up.
(dvdnavsrc_get): Renamed to dvdnavsrc_loop (element is now loop
based). Lots of cleanup, and propper support for most libdvdnav
events.
(dvdnavsrc_make_dvd_event): New function.
(dvdnavsrc_make_dvd_nav_packet_event): New function.
(dvdnavsrc_make_clut_change_event): New function.
Original commit message from CVS:
Make sure set_explicit_caps() is called before adding pad.
* ext/ffmpeg/gstffmpegdemux.c: (gst_ffmpegdemux_loop):
* gst/id3/gstid3types.c: (gst_id3types_loop):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead):
* gst/realmedia/rmdemux.c: (gst_rmdemux_add_stream):
Original commit message from CVS:
2004-01-30 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead):
Fix audio.
Original commit message from CVS:
* ext/dv/gstdvdec.c: (gst_dvdec_loop):
Fix caps negotiation.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_class_init),
(dvdnavsrc_update_buttoninfo), (dvdnavsrc_get),
(dvdnavsrc_get_event_mask), (dvdnav_handle_navigation_event),
(dvdnavsrc_event):
* ext/mpeg2dec/gstmpeg2dec.c:
* gst-libs/gst/navigation/navigation.c:
(gst_navigation_send_key_event), (gst_navigation_send_mouse_event):
* gst-libs/gst/navigation/navigation.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_handle_src_event):
* sys/ximage/ximagesink.c: (gst_ximagesink_handle_xevents):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_handle_xevents):
Super-simple first version of mouse and keyboard events. Clicking
on a DVD menu now works, although it may not take you where you
expected.
* gst/sine/gstsinesrc.c: (gst_sinesrc_src_fixate):
* gst/videotestsrc/gstvideotestsrc.c:
(gst_videotestsrc_src_fixate):
These fixate functions were broken - they never actually
fixated :)
Original commit message from CVS:
2004-01-05 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead):
Add pad to element *after* setting functions such as event handler.
Without this, the scheduler (opt) will link pads, set the event
handler from the default event function (dispatcher in gstpad.c)
and *after* that, we will set our own event function, which will
thus never be used (and thus mpegdemux doesn't handle events).
Original commit message from CVS:
2004-01-04 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead):
Fix more integer overflows. Again, see #126967.
Original commit message from CVS:
2004-01-03 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_class_init),
(gst_mpeg_parse_init):
* gst/mpegstream/gstmpegparse.h:
Remove clock (which was never provided, i.e. dead code), and
also fix integer overflows at high PTS values (see #126967).
