Use of a rate control method (pass, bitrate, quantizer, etc properties), a
preset and possibly a profile and/or tuning are now the recommended way to
configure x264 through x264enc.
If a preset/tuning are specified then these will define the default values and
the property defaults will be ignored. After this the option-string property is
applied, followed by the user-set properties, fast first pass restrictions and
finally the profile restrictions.
Addresses part of bug #607798
- Make defaults append the appropriate default value to a string. This is
needed to differentiate between something user-set and the actual prop
default.
- Add an internal option string to which _set_property () cases append for the
majority of properties.
- Use gst_x264_enc_parse_options () to clean up application of settings. This
will make order of application with respect to the presets and tunings quite
simple.
Addresses part of bug #607798
Uses new x264 API to apply reduced complexity values to the parameters to
increase encoding speed in the first pass of a multi-pass encode. This does
not impact on final quality.
Addresses part of bug #607798
In X264_BUILD >= 86 there is a new API for applying restrictions to an H.264
Profile. This makes it easier to achieve Baseline Profile for example.
Addresses part of bug #607798
If it is enabled, then it will be main profile instead of baseline.
This ensures maximum compatibility of the output stream until the
encoder configuration interface gets an overhaul with explicit
output profile selection.
Fixes#619776.
Fix off-by-one bug when constructing the avcC header chunk: we
wrote wrong profile info into the header. The first byte in the
SPS NAL we get from x264 is the nal type, not the profile_idc.
Also add some debug logging.
Fixes#610089.
lame's 'lgv' variable is only initialized when the caps
is negotiated, whenever a seek happens before that, it would
attempt to call a function on an empty pointer, causing the crash.
Fixes#603515
liba52 in a52dec-0.7.4 does not have any MMX, MMXEXT or 3DNOW based
IMDCT transform acceleration. It does however have a software based
acceleration using the djbfft library (D.J. Bernstein's library for
fourier transforms - Extremely fast library for floating-point
convolution). So allow liba52 to use it through the MM_ACCEL_DJBFFT
flag.
The liba52 copy in MPlayer sources does have SSE, 3dnowext, 3dnow
and AltiVec implementations, but those are checked for first, and
djbfft is chosen only if none of those is available - good in the
case of some distributions including a port of the MPlayer changes
in their system a52dec library.
The down and upmix code in liba52 doesn't seem to be disturbed by
this additional MM_ACCEL flag and will still use MMX, SSE or 3DNOW
versions if passed from oil_cpu_get_flags (SSE currently is not).
Fixes bug #592787.
Remove dvdnav plugin, it has no future. resindvd is the plugin to
use for dvd playback. Note that dvdnav was never really enabled
in -ugly, you had to edit configure.ac to get it built.
Original commit message from CVS:
* ext/x264/gstx264enc.c: (gst_x264_enc_class_init),
(gst_x264_enc_header_buf), (gst_x264_enc_encode_frame):
Use hyphen in property name, perform safety buffer size check
prior to mem access, and some more parentheses in macro.
Original commit message from CVS:
* ext/apexsink/Makefile.am:
Link against -lgcrpyto for RSA_new and RSA_free.
* ext/faac/gstfaac.c:
* ext/x264/gstx264enc.c:
Fix compiler warnings.
Original commit message from CVS:
* ext/x264/gstx264enc.c: (gst_x264_enc_set_src_caps):
Construct source caps in more conventional (and correct) manner.
Original commit message from CVS:
* ext/x264/gstx264enc.c: (gst_x264_enc_reset),
(gst_x264_enc_chain), (gst_x264_enc_encode_frame):
* ext/x264/gstx264enc.h:
Do not deal with duplicated input (timestamps). If needed,
a generic element can do so.
Do not manipulate input timestamps on the way out,
since that shifts the timeline and A/V sync.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins.args:
Integrate new properties into documentation.
* ext/x264/gstx264enc.c: (gst_x264_enc_class_init),
(gst_x264_enc_init), (gst_x264_enc_init_encoder),
(gst_x264_enc_set_property), (gst_x264_enc_get_property):
Fix up API prior to eventual plugin move.
API: GstX264Enc:pass (provides more options, and changed to enum)
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* ext/x264/gstx264enc.c:
* tests/check/Makefile.am:
* tests/check/elements/x264enc.c: (setup_x264enc),
(cleanup_x264enc), (GST_START_TEST), (x264enc_suite), (main):
Add documentation and unit test for x264enc.
Original commit message from CVS:
* ext/x264/gstx264enc.c: (gst_x264_enc_init),
(gst_x264_enc_header_buf), (gst_x264_enc_encode_frame):
Allocate some buffers in more adaptive and economical fashion.
Original commit message from CVS:
* configure.ac:
Check for sufficiently up-to-date x264 API.
* ext/x264/gstx264enc.c: (gst_x264_enc_pass_get_type),
(gst_x264_enc_base_init), (gst_x264_enc_class_init),
(gst_x264_enc_init), (gst_x264_enc_init_encoder),
(gst_x264_enc_set_property), (gst_x264_enc_get_property):
* ext/x264/gstx264enc.h:
Expose some more parameters of the x264 encoder as properties.
Original commit message from CVS:
* ext/x264/gstx264enc.c: (gst_x264_enc_log_callback),
(gst_x264_enc_finalize), (gst_x264_enc_header_buf),
(gst_x264_enc_set_src_caps), (gst_x264_enc_sink_set_caps),
(gst_x264_enc_flush_frames):
Coding style and layout; re-order some functions in more
typical and natural flow.
Original commit message from CVS:
* ext/x264/Makefile.am:
* ext/x264/gstx264enc.c: (gst_x264_enc_header_buf),
(gst_x264_enc_sink_set_caps), (gst_x264_enc_base_init),
(gst_x264_enc_class_init), (gst_x264_enc_log_callback),
(gst_x264_enc_init), (gst_x264_enc_init_encoder),
(gst_x264_enc_finalize), (gst_x264_enc_chain),
(gst_x264_enc_encode_frame), (plugin_init):
* ext/x264/gstx264enc.h:
Use video format library and GST_WRITE_*_BE macros where applicable.
Use finalize in stead of dispose.
Set up debug category and log callback.
Original commit message from CVS:
* ext/x264/gstx264enc.c: (gst_x264_enc_header_buf),
(gst_x264_enc_sink_event), (gst_x264_enc_chain),
(gst_x264_enc_encode_frame):
Try harder not to crash when we get an EOS event but haven't set
up the encoder yet (as may happen when upstream errors out with
not-negotiated, for example). Also, always push the EOS event
downstream.
Original commit message from CVS:
* ext/x264/gstx264enc.c (gst_x264_enc_init_encoder):
This needs a version check.
* gst/bayer/Makefile.am:
Fix the build.
Perform some cleanups based on the dtsdec code such as using the boilerplate
macro and static pad template functions.
Add some documentation. Don't register a change in flags until we synch on
another frame successfully.
The repeat first field flag was introduced in 0.5.0 so conditionally disable its
detection and just assume no rff is used. This fixes the compilation.
Fixes#582375
lame_set_VBR_quality(), which takes a floating point value for the
quality, has been added only in v3.98. Use lame_set_VBR_q(), which
takes quality as an integer, for older LAME versions.
Fixes#581341.
Original commit message from CVS:
* ext/resindvd/plugin.c: (plugin_init):
* ext/resindvd/resindvdsrc.c:
* ext/twolame/gsttwolame.c: (plugin_init):
* gst/aiffparse/aiffparse.c: (plugin_init):
Enable/fix up translations for these plugins.
* po/LINGUAS:
Add 'ca' to LINGUAS.
* po/POTFILES.in:
* po/POTFILES.skip:
Add more files for translation and more files which tools
should skip.
Original commit message from CVS:
* ext/twolame/gsttwolame.c: (gst_two_lame_sink_setcaps),
(gst_two_lame_chain):
* ext/twolame/gsttwolame.h:
Allow raw float samples as input for encoding.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format):
Last change introduced a regression that made mpeg2dec handle
some 4:2:2 videos as 4:4:4. Fixes bug #562086.
Original commit message from CVS:
Patch by: Simon Holm Thøgersen <odie at cs dot aau dot dk>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_chain):
Add support for the STATE_SEQUENCE_MODIFIED state in mpeg2dec
>= 0.5.0. Fixes bug #562065.
Original commit message from CVS:
* ext/sidplay/Makefile.am:
Use GST_CXXFLAGS for C++ code instead of GST_CFLAGS. The latter could
contain CFLAGS that do not exist for C++, like -Wvla or
-Wdeclaration-after-statement. Fixes bug #561161.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnb_variant_get_type),
(gst_amrnbdec_class_init), (gst_amrnbdec_set_property),
(gst_amrnbdec_get_property), (gst_amrnbdec_chain):
* ext/amrnb/amrnbdec.h:
Add a property to select the amr variant. Fixes#424070.
Original commit message from CVS:
Patch by: Robin Stocker <robin at nibor dot org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(handle_sequence), (gst_mpeg2dec_setcaps):
* ext/mpeg2dec/gstmpeg2dec.h:
Prefer the container's PAR over the stream's PAR if it's
given in the srcpad caps. Fixes bug #556184.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_src_event), (gst_mad_chain),
(gst_mad_change_state):
* ext/mad/gstmad.h:
track discont on incomming buffers and set discont on outgoing
buffers.
Pass unknown events upstreams instead of dropping them.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c:
* ext/a52dec/gsta52dec.h:
Fix channel re-negotiation on a change of the incoming stream.
Patch By: Thijs Vermeir <thijsvermeir@gmail.com>
Fixes: #551660
Original commit message from CVS:
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_chain),
(gst_amrnbenc_state_change):
* ext/amrnb/amrnbenc.h:
Pass the discont flag from the input buffer on to the output buffer in
the AMR encoder.
Original commit message from CVS:
Patch by: Benoit Fouet <benoit dot fouet at purplelabs dot com>
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_query),
(gst_amrnbparse_chain), (gst_amrnbparse_loop),
(gst_amrnbparse_state_change):
* ext/amrnb/amrnbparse.h:
Fix the duration query. Fixes#536226.
Also set caps on the pads and buffers more correctly.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c:
Set up a default time segment for output when receiving
an incoming byte segment (as for raw AC3 files).
Fixes: #548194
Original commit message from CVS:
Patch by: Frederic Crozat <fcrozat@mandriva.org>
* ext/dvdread/dvdreadsrc.c: (plugin_init):
* ext/lame/gstlame.c: (plugin_init):
* gst/asfdemux/gstasf.c: (plugin_init):
Make sure gettext returns translations in UTF-8 encoding rather
than in the current locale encoding (#546822).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_class_init),
(gst_lame_get_default_settings):
Use the default for the strict-iso property too.
Allow a bitrate setting of 0, which lets lame choose the default value
and which makes it possible to set the compression-ratio property.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_class_init), (gst_lame_init),
(gst_lame_chain), (gst_lame_get_default_settings), (plugin_init):
* ext/lame/gstlame.h:
Get the defaults settings of LAME in the plugin initialization
function and return FALSE here if something goes wrong. This removes
the hacky failing instance init function.
Use LAMEs default value for all settings instead of overwriting some
of them. Overwriting some of them gives unexpected results if one only
sets a preset. Fixes bug #498004.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_init):
Use LAME's default for the min/max/mean VBR bitrate. Setting our own
defaults will restrict the bitrate when using the presets in a bad way.
Fixes bug #498004.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps):
* gst/mpegaudioparse/gstmpegaudioparse.c:
(mp3_type_frame_length_from_header), (mp3_caps_create),
(gst_mp3parse_chain):
Put the MPEG audio version into the caps as "mpegaudioversion".
This is different from "mpegversion".
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_class_init), (gst_lame_init),
(gst_lame_set_property), (gst_lame_get_property), (gst_lame_setup):
* ext/lame/gstlame.h:
Fix build with lame >= 3.97. The padding type and cwlimit settings
are deprecated now and the function declarations are hidden in the
headers so deprecate the GObject properties for them and remove them
in 0.11. Fixes bug #544039.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence):
Don't allow width/height outside the spec (i.e. smaller than 16
and higher than 4096). Such files are corrupted ones and setting
caps that are not a subset of the template caps confuses playbin.
Fixes bug #542646.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_read),
(gst_dvd_read_src_create), (gst_dvd_read_src_handle_seek_event):
Allow and implement non-flushing and/or segment seek
(mainly in TIME and chapter format).
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event),
(gst_dvd_demux_get_subpicture_stream),
(gst_dvd_demux_synchronise_pads),
(gst_dvd_demux_sync_stream_to_time):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_process_event),
(gst_mpeg_demux_send_subbuffer),
(gst_mpeg_demux_sync_stream_to_time),
(gst_mpeg_streams_reset_cur_ts):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_process_event),
(gst_mpeg_parse_pad_added), (gst_mpeg_parse_handle_src_query):
Delegate a query to upstream if it can't be handled.
Make segment stop aware.
Fix (subtitle) stream synchronization.
Add some debug statements.
Original commit message from CVS:
* docs/plugins/gst-plugins-ugly-plugins-docs.sgml:
* docs/plugins/gst-plugins-ugly-plugins-sections.txt:
* ext/a52dec/gsta52dec.c:
* ext/amrnb/amrnbdec.c:
* ext/amrnb/amrnbenc.c:
* ext/amrnb/amrnbparse.c:
* ext/lame/gstlame.c:
* ext/mad/gstmad.c:
* ext/sidplay/gstsiddec.cc:
* gst/asfdemux/gstrtspwms.c:
* gst/mpegaudioparse/gstxingmux.c:
* gst/realmedia/rademux.c:
* gst/realmedia/rdtmanager.c:
* gst/realmedia/rtspreal.c:
* gst/synaesthesia/gstsynaesthesia.c:
Add missing elements to docs. Restore alphabetical order in section
file. Document mad (it was included in docs already).
Fix doc-markup: use convinience syntax for examples
(produces valid docbook), add several refsec2 when we have several
titles. Fix some types.
Original commit message from CVS:
* ext/lame/gstlame.c:
* ext/sidplay/gstsiddec.cc:
* gst/mpegaudioparse/gstxingmux.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Original commit message from CVS:
Patch by: Benjamin Kampmann <benjamin at fluendo dot com>
* ext/cdio/gstcdio.c: (gst_cdio_get_cdtext),
(gst_cdio_add_cdtext_album_tags):
* ext/cdio/gstcdio.h:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open):
Also extract album title and album genre from CD-TEXT if
available (#537021).
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-ugly-plugins-docs.sgml:
* docs/plugins/gst-plugins-ugly-plugins-sections.txt:
* docs/plugins/gst-plugins-ugly-plugins.args:
* docs/plugins/gst-plugins-ugly-plugins.hierarchy:
* docs/plugins/gst-plugins-ugly-plugins.interfaces:
* docs/plugins/inspect/plugin-a52dec.xml:
* docs/plugins/inspect/plugin-amrnb.xml:
* docs/plugins/inspect/plugin-asf.xml:
* docs/plugins/inspect/plugin-dvdlpcmdec.xml:
* docs/plugins/inspect/plugin-dvdread.xml:
* docs/plugins/inspect/plugin-dvdsub.xml:
* docs/plugins/inspect/plugin-iec958.xml:
* docs/plugins/inspect/plugin-lame.xml:
* docs/plugins/inspect/plugin-mad.xml:
* docs/plugins/inspect/plugin-mpeg2dec.xml:
* docs/plugins/inspect/plugin-mpegaudioparse.xml:
* docs/plugins/inspect/plugin-mpegstream.xml:
* docs/plugins/inspect/plugin-realmedia.xml:
* docs/plugins/inspect/plugin-siddec.xml:
* docs/plugins/inspect/plugin-synaesthesia.xml:
* ext/a52dec/gsta52dec.c:
Random doc of the day. Also print human readable format of newsegment
in log message if we complain about it.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_init), (gst_a52dec_push),
(gst_a52dec_sink_event), (gst_a52dec_handle_frame),
(gst_a52dec_chain), (gst_a52dec_change_state):
* ext/a52dec/gsta52dec.h:
Mark discont on outgoing buffers after receiving a DISCONT buffer or
when we have a decoding error.
We don't need to clear the cache when we receive a NEWSEGMENT event.
Clear buffer cache in DISCONT.
Add beginnings of GstSegment handling.
Original commit message from CVS:
* ext/sidplay/gstsiddec.cc:
Cast NULL sentinels to void * as NULL is defined as an integer
constant in most environments when using C++ and it's size might
be different from a pointer. Fixes#529488.
Original commit message from CVS:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_loop):
We should also stop the streaming task when we get a NOT_LINKED
flow return, which is not covered by FLOW_IS_FATAL.
Original commit message from CVS:
* ext/dvdnav/dvdnavsrc.c:
* ext/dvdnav/dvdnavsrc.h:
Apply patch that adds some seeking support to dvdnav, and fixes it
in various other ways. This doesn't make dvdnavsrc fully functional,
but moves it forward.
Fixes: #476149
Patch By: Simone Gotti <simone.gotti@email.it>
* ext/dvdnav/gst-dvd:
Update the simple dvdnavsrc gst-launch example to work for 0.10
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_sink_event):
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_sink_event):
Push EOS, FLUSH_STOP and NEWSEGMENT immediately instead
of dropping and leaking them.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_dispose), (gst_mad_sink_event),
(gst_mad_chain):
* ext/mad/gstmad.h:
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_dispose),
(gst_mp3parse_sink_event), (gst_mp3parse_emit_frame):
* gst/mpegaudioparse/gstmpegaudioparse.h:
Cache all events except EOS if we still have to send a NEWSEGMENT
event. This will let TAG events be forwarded until after decodebin
to an encoder for example as decodebin only links the pads
after NEWSEGMENT. Fixes bug #518933.
Original commit message from CVS:
* configure.ac:
* ext/sidplay/Makefile.am:
Check for and define ERROR_CXXFLAGS and GST_CXXFLAGS and use them
when building C++ code (#516509).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps):
Fix broken GST_ELEMENT_ERROR macro, fixes compile with the Sun
Workshop 12 compiler, but probably also crashes (#517985).
Original commit message from CVS:
Patch by: Tal Shalif <tshalif at nargila dot org>
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_create),
(gst_dvd_read_src_do_seek), (gst_dvd_read_src_do_position_query):
Add some gint64 casts to prevent 32 bit integer overflows.
Fixes bug #516989.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c:
Fix regression in DVD seeking - when a pack we
expect to be a NAV block turns out not to be, scan forwards
for up to 2MB (at most ~1sec) until we find one.
Fixes: #516278
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c:
Reset decoder when handling sequence where libmpeg2 has set
frame period to 0, probably due to a corrupt packet.
Fixes bug #514297
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_class_init):
Don't add pad templates for the base class but only in the
subclasses.
Original commit message from CVS:
* ext/lame/gstlame.c:
* ext/lame/gstlame.h:
Fix the case where you initially have stereo input, and so lame's
mode is not set to mono, and then you get input with mono audio and
soon after you get stereo input again. What happened before this
commit is that it would keep the encoding mode as mono. It should
change it back to the one requested by the app (or the default one)
if not requested.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event):
Use gst_util_uint64_scale instead of gst_util_uint64_scale_int
as 8 * GST_SECOND is too large for int.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at syknet dot be>
* ext/lame/gstlame.c: (gst_lame_sink_setcaps),
(gst_lame_sink_event):
Correctly set number of channels when using mono-encoding mode
and fix the duration calculation of the EOS buffer.
Original commit message from CVS:
* ext/mad/gstmad.c: (GST_TYPE_MAD_MODE),
(GST_TYPE_MAD_EMPHASIS), (GST_TAG_EMPHASIS), (CHECK_HEADER):
Call g_type_class_ref() from a thread-safe context and not
from the streaming thread to avoid GLib screwing up (see
bug #349410 and #493432). Comment out unused code.
Original commit message from CVS:
* ext/mad/gstmad.c: (mpg123_parse_xing_header):
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame):
Make sure that the Xing TOC starts with 0 and the entries
are increasing over time. Otherwise it's broken and should
be skipped. Fixes bug #507821.
Original commit message from CVS:
* configure.ac:
Update requirements from past CVS versions to released
versions (0.10.14 in this case).
* ext/sidplay/gstsiddec.cc:
Fix compilation with g++-4.2.
Original commit message from CVS:
* ext/lame/gstlame.c:
Allow fixing the sample rate lame converts to by negotiating fixed
sample rate on the src pad caps.
Add docs for it.
* tests/check/Makefile.am:
* tests/check/pipelines/lame.c:
Add a check for it.
Original commit message from CVS:
Patch by: Daniel Charles <dcharles at ti dot com>
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_bandmode_get_type),
(gst_amrnbenc_set_property), (gst_amrnbenc_get_property),
(gst_amrnbenc_base_init), (gst_amrnbenc_class_init),
(gst_amrnbenc_chain), (gst_amrnbenc_state_change):
* ext/amrnb/amrnbenc.h:
Add property to select the BandMode of the AMR encoder.
See #466442.
Original commit message from CVS:
* configure.ac:
* ext/mad/gstmad.c: (gst_mad_chain):
Use the new buffer clipping function from gstaudio here and
require gst-plugins-base CVS.
Original commit message from CVS:
* ext/mad/gstmad.c: (_do_init), (gst_mad_init), (index_seek),
(normal_seek), (gst_mad_sink_event), (clip_outgoing_buffer),
(gst_mad_chain), (gst_mad_change_state):
* ext/mad/gstmad.h:
Implement buffer clipping and use GST_BOILERPLATE instead of manual
GType magic. Part one of bug #308312.
Original commit message from CVS:
* configure.ac:
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer):
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_descramble_buffer):
* gst/dvdlpcmdec/gstdvdlpcmdec.c: (gst_dvdlpcmdec_chain_raw):
Fix build against core CVS by not using deprecated API. Bump
requirements for new API (overdue anyway).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_base_init),
(gst_amrnbdec_event), (gst_amrnbdec_chain),
(gst_amrnbdec_state_change):
* ext/amrnb/amrnbdec.h:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_base_init),
(gst_amrnbparse_loop):
Add newsegment and discont handling. Some code cleanups.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c:
If we can't read a nav packet, or it doesn't look like a nav
packet, that's an error. Previous behavior was to look at
the next packet; I can't find any justification for doing that.
Fixes: #358891.
Original commit message from CVS:
Patch by: Laurent Glayal <spglegle at yahoo dot fr>
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_class_init),
(gst_amrnbdec_finalize):
Don't leak the adapter, unref it in a new finalize method instead.
Fixes#448782.
Original commit message from CVS:
* ext/dvdnav/dvdnavsrc.c: (gst_dvd_nav_src_set_property):
Don't forget to unlock when setting the device property, or
we'll sooner or later deadlock.
Original commit message from CVS:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_get_type),
(gst_amrnbparse_class_init), (gst_amrnbparse_init),
(gst_amrnbparse_pull_header), (gst_amrnbparse_loop):
Fix pull mode operation some more: send newsegment event before
sending data; handle EOS and fatal flow returns a bit better; don't
leak buffers in some cases. Misc. minor cleanups. Fixes#431707.
Original commit message from CVS:
2007-03-27 Julien MOUTTE <julien@moutte.net>
* ext/mad/gstmad.c: (gst_mad_chain): Generate a perfect
stream and try to adapt to incoming timestamps lack of
precision up to half a frame. This allows generating
a perfect stream even with muxed formats like FLV where
the timestamps are stored in milliseconds.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_setup):
Disable the bitrate checking when the user has requested
Free Format mode, as all bitrates less than the maximum
are valid then.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_convert_sink), (gst_mad_convert_src):
When handling seeks, don't convert -1 start or stop values to a bogus
byte position - pass them upstream as -1.
Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Make sure we always destroy our libcdio handle.
Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_probe_devices),
(gst_cdio_cdda_src_read_sector), (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Small code cleanups.
Don't use pad_alloc as the base class cannot deal with the error codes.
Original commit message from CVS:
Patch by: Zaheer Abbas Merali <zaheermerali at gmail com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_chain):
Never post a (fatal) error message on the bus on decoding errors. We
should only do this if we can't recover, but mpeg2dec can always
recover. This is needed for DVB streams, for example, where there
may be temporary glitches in the stream. Instead of an error
message, post a warning message on the bus for every N decoding
errors. Fixes#370020.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_class_init), (gst_lame_init),
(gst_lame_setup):
Display sensible defaults and limits for the
vbr-min/max/mean properties. Fix the 'hard-limit' VBR min
property - it's supposed to be a boolean 0/1 value.
Original commit message from CVS:
* ext/lame/gstlame.c:
Initialise the variables so gcc doesn't complain about possibly
uninitialised uses, even though they can't actually happen.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps),
(gst_lame_set_property), (gst_lame_setup):
Fix up bitrate checking macro. Make it give us a
GST_ELEMENT_WARNING message so the application has a chance of
reporting this to the user. Move the checking to _setup, so we
are sure it runs in the READY state, when we hope to have a pipeline
and a bus that is not flushing.
This fixes e.g. using 96 kbit/sec as a bitrate.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event), (gst_lame_chain),
(gst_lame_change_state):
* ext/lame/gstlame.h:
On receiving EOS, we try to push a last buffer with the remaining
samples. Don't do that if we got an unclean flow return on the last
gst_pad_push(), downstream might not handle this very gracefully
(see #403168).
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain):
Pass flow returns upstream (helps #403168).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps), (gst_lame_chain):
warn when outgoing sample rate is different from incoming
Original commit message from CVS:
Based on patch by: Roland Kay <roland.kay at ox compsoc net>
* ext/lame/gstlame.c: (gst_lame_init), (gst_lame_chain),
(gst_lame_setup):
* ext/lame/gstlame.h:
Fix leak (by calling lame_init_params() before lame_close()); handle
NULL return from lame_init() more gracefully. Fixes#385311.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Align buffers to a 16 byte boundary so the altivec optimisations
don't crash. Fixes#327350.
Original commit message from CVS:
Patch by: Jan Arne Petersen <jpetersen at jpetersen dot org>
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence), (handle_slice):
Simplify the framerate code and support more framerates. Fixes#361584.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init):
Fix minor memleak when creating pads from static pad templates (#369627).
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/mpeg2dec.c: (setup_mpeg2dec),
(cleanup_mpeg2dec), (GST_START_TEST), (mpeg2dec_suite), (main):
Add unit tests for mpeg2dec (#369627).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event), (gst_lame_chain),
(gst_lame_change_state):
* ext/lame/gstlame.h:
Make lame timestamp flushed eos buffer by some additional timestamp
accounting. Fixes#374760.
Original commit message from CVS:
Patch by: Sebastian Droege <slomo at ubuntu dot com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_finalize),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
libmpeg2 requires its output buffers to start at a 16byte aligned
address or the altivec optimizations will explode.
Original commit message from CVS:
* ext/cdio/gstcdio.c: (gst_cdio_get_cdtext):
* ext/cdio/gstcdio.h:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open):
Move CD-TEXT utility function into common file so it can also be
used by a future cdioparanoiasrc.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_read):
Use dsi_pack.dsi_gi.vobu_ea correctly, add some more debugging
information (fixes#340433).
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_goto_title):
Don't announce audio or subtitle streams that aren't really present,
it makes dvddemux create pads that will never carry any data, which
is not good.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_set_property):
Round up not allowed bitrates to the next higher allowed one
(Closes: #361140).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps),
(gst_lame_set_property), (gst_lame_get_property), (gst_lame_chain),
(plugin_init):
* po/POTFILES.in:
Add i18n magic to lame plugin. Throw decent error message when we
fail to setup the encoder (#361140, 361151); misc. minor clean-ups.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Add some debugging to timestamp handling.
Make sure we don't convert invalid timestamps.
Original commit message from CVS:
* ext/mad/gstid3tag.c:
* gst/mpegstream/gstrfc2250enc.h:
* gst/synaesthesia/gstsynaesthesia.c:
More G_OBJECT macro fixing.
Original commit message from CVS:
Patch by: Yves Lefebvre <ivanohe at abacom dot com>
* ext/mpeg2dec/gstmpeg2dec.c: (init_dummybuf):
Fix initialisation dummy buffer, the offsets are relative to the start
of the buffers. Fixes#356004.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_read):
Add convert query (needed for later when we just operate in time
format and let the base source class handle all the seeking stuff).
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_mode_get_type),
(gst_a52dec_class_init), (gst_a52dec_init), (gst_a52dec_channels),
(gst_a52dec_handle_frame), (gst_a52dec_change_state),
(gst_a52dec_set_property), (gst_a52dec_get_property):
* ext/a52dec/gsta52dec.h:
Patch from from Michal Benes <michal.benes@itonis.tv>:
Add two things to a52dec: configure the exact output format for ac3
decoding through properties, if desired.
By default, configure an output format preferred by downstream. Now
that audioconvert lists caps by preference, this means that a52dec
can do downmixing (iff required) rather than audioconvert, so it can
use the ac3 downmix levels from the bitstream.
Original commit message from CVS:
* ext/lame/Makefile.am:
* ext/mpeg2dec/Makefile.am:
* gst/dvdlpcmdec/Makefile.am:
* gst/dvdsub/Makefile.am:
* gst/mpegaudioparse/Makefile.am:
Add missing GST_LIBS to the link flags
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at itonis dot tv>
* ext/mad/gstmad.c: (gst_mad_chain):
Fix timestamping in mad by only activating a new timestamp when the
previous frame has been decoded. Fixes#350723.
Also clean up some of the non fatal warnings when the input buffer is
too small to decode a header.
Original commit message from CVS:
Patch by: Wim Taymans <wim at fluendo dot com>
* ext/a52dec/gsta52dec.c: (gst_a52dec_sink_event):
Instead of forwarding the event in the wrong format, unref it and set
a boolean that we still need to send it in the streaming thread.
Fixes#350554
Original commit message from CVS:
Patch by: Edward Hervey (edward at fluendo dot com)
* ext/dvdread/dvdreadsrc.c: (plugin_init):
Put debug category initialization before use of GST_DEBUG, in order
to remove a fatal warning. Fixes#350895
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_goto_title):
Error out properly if this is an interactive DVD (fixes#345694).
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_chain):
When the first_access is 1 or 0, we should copy the timestamp from
the incoming buffer if there is one.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_channels), (gst_a52dec_push),
(gst_a52dec_reneg), (gst_a52dec_handle_frame), (gst_a52dec_chain):
Use GST_ELEMENT_ERROR for error reporting; post errors in some
more places; remove superfluous newlines from debug statements.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_stop),
(gst_dvd_read_src_goto_chapter),
(gst_dvd_read_src_get_chapter_starts),
(gst_dvd_read_src_goto_title), (gst_dvd_read_src_get_next_cell),
(gst_dvd_read_src_get_time_for_sector),
(gst_dvd_read_src_get_sector_from_time), (gst_dvd_read_src_read),
(gst_dvd_read_src_handle_seek_event), (gst_dvd_read_src_do_seek),
(gst_dvd_read_src_goto_sector):
* ext/dvdread/dvdreadsrc.h:
Add basic support for time-based seeking; set timestamps on
outgoing buffers if we have them; create table with
chapter to time mapping when opening a title; rename
gst_dvd_read_src_get_next_cell_for() to _get_next_cell() and
make it take an explicit pgc argument; fix up some debugging
messages so that title/chapter numbers are printed as starting
from 1 for easier readability.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (plugin_init):
* po/POTFILES.in:
Make custom error messages translatable.
* gst/asfdemux/gstasf.c: (plugin_init):
Remove setlocale() call, doesn't seem to be needed or recommended for
plugins, at least not according to gstreamer/docs/random/i18n.
Original commit message from CVS:
2006-07-26 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_setup):
Fix lame putting lots of 0's at start of mp3. Fixes bug #348786.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_init),
(gst_dvd_read_src_is_seekable), (gst_dvd_read_src_class_init),
(gst_dvd_read_src_stop), (gst_dvd_read_src_goto_title),
(gst_dvd_read_src_create), (gst_dvd_read_src_handle_seek_event),
(gst_dvd_read_src_do_seek), (gst_dvd_read_src_src_event):
* ext/dvdread/dvdreadsrc.h:
Rewrite seeking code and make seeking in DVDs work (#337834).
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (plugin_init):
Call the channel positions get_type() method in plugin_init
to ensure that it isn't simultaneously called later from
multiple threads.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_channels), (plugin_init):
Treat dual-mono as stereo. It should really be output on 2 separate
pads, but isn't for now.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format):
Assume pixel-aspect-ratio of 4:3 if libmpeg2dec doesn't give us
any PAR whatsoever (rather than using 0/0, which will lead to
an abort later on). Fixes#345184.
Original commit message from CVS:
Patch by: Michael Dominic K. < mdk at mdk org pl>
* ext/mad/gstmad.c: (gst_mad_chain):
Send newsegment event before calling
gst_pad_alloc_buffer_and_set_caps(), makes mad behave better
in connection with pad blocking (#342594). While we're at it,
do some minor clean-ups.
Original commit message from CVS:
* ext/a52dec/Makefile.am:
... and then he said "When you go and fix the build you
better make sure you have some spare backslashes in your
pocket".
Original commit message from CVS:
* ext/sidplay/gstsiddec.cc:
Fix copyright, email addresses and descriptions.
Use saner defaults for arguments. Fixes#344667.
constify some stuff.
Fix memleaks.
Add tags.
Fix negotiation to do mono/44100 by default.
Post error messages.
Use _scale_int where possible.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_finalize),
(gst_mpeg2dec_reset), (clear_buffers), (handle_picture),
(gst_mpeg2dec_sink_convert), (gst_mpeg2dec_src_convert),
(gst_mpeg2dec_change_state):
* ext/mpeg2dec/gstmpeg2dec.h:
Simplify and don't leak our buffer pool.
Use _scale_int.
Remove unfixed bug number from previous ChangeLog entry.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_base_init),
(gst_mpeg2dec_class_init), (gst_mpeg2dec_init),
(gst_mpeg2dec_finalize), (gst_mpeg2dec_reset),
(gst_mpeg2dec_qos_reset), (gst_mpeg2dec_alloc_buffer),
(gst_mpeg2dec_negotiate_format), (init_dummybuf),
(handle_sequence), (handle_picture), (handle_slice),
(gst_mpeg2dec_chain), (gst_mpeg2dec_sink_event),
(gst_mpeg2dec_src_event), (gst_mpeg2dec_change_state):
* ext/mpeg2dec/gstmpeg2dec.h:
Fix padtemplate as we can now do fractional framerates.
Small cleanups.
Use GstSegment.
Add simple frame dropping QoS.
Precalc buffer output sizes and UV offsets.
Always give libmpeg2 a valid fbuf when it wants one.
don't trust libmpeg to discard our buffers but manage it
ourselves.
Fixes#343627, #327350, #335288
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_event), (gst_amrnbdec_chain):
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_init),
(gst_amrnbparse_sink_event), (gst_amrnbparse_chain),
(gst_amrnbparse_sink_activate), (gst_amrnbparse_state_change):
* ext/amrnb/amrnbparse.h:
Sortof first quick cleanup of all this mess...
Don't crap out on empty and invalid FTs but treat them as
empty packets, the decoder handles them fine.
Fixes#342222.
Original commit message from CVS:
Patch by: James "Doc" Livingston <doclivingston gmail com>
* ext/mad/gstid3tag.c: (gst_id3_tag_get_tag_to_render):
Do tag merging correctly (#339918). Output taglists
properly in debug statements too while we're at it.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_chain):
Add more debug
* gst/dvdlpcmdec/gstdvdlpcmdec.c: (gst_dvdlpcm_reset),
(gst_dvdlpcmdec_init), (update_timestamps),
(gst_dvdlpcmdec_chain_dvd), (gst_dvdlpcmdec_chain_raw),
(dvdlpcmdec_sink_event):
* gst/dvdlpcmdec/gstdvdlpcmdec.h:
If we have a first_access offset but no current timestamp (might
happen after a seek), then calculate a start time for the first
portion so that it will align with the timestamp given for the
first_access portion.
If a new-segment arrives with format time, store the start
time as a failsafe timestamp in case we never get any further
timestamp info (unlikely)
Mask out the 'frame number' section of the incoming header so
that we don't consider it to be changing on every buffer and
reset the caps constantly.
Use gst_util_uint64_scale for duration calculation
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_get_type),
(gst_lame_release_memory), (gst_lame_init), (gst_lame_sink_event),
(gst_lame_setup), (gst_lame_change_state):
* ext/lame/gstlame.h:
Remove tag writing from lame (which was completely broken
anyway, #329184). Leaving GstTagSetter interface around for
now, albeit non-functional. Should be removed completely
in 0.11. Use the 'id3v2mux' plugin from -good for writing
tags.
Original commit message from CVS:
Patch by: Andres Salomon <dilinger at debian org>
* ext/lame/gstlame.c: (gst_lame_sink_event):
Fix typo (comma vs. semicolon) (#340710).
Original commit message from CVS:
Patch by: Lutz Müller <lutz at topfrose de>
* ext/mad/gstmad.c: (gst_mad_init), (gst_mad_src_query):
Make mad the second element to support the highly useful
FORMATS query (#340594)
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_sink_convert),
(gst_mpeg2dec_src_query):
Remember the query duration format before passing it upstream since it
could have been modified.
Add GST_WARNING_OBJECT in sink convert function to detail why the
conversion didn't work.
Original commit message from CVS:
* ext/mad/gstid3tag.c:
* ext/mad/gstmad.c:
* gst/ac3parse/gstac3parse.c:
* gst/dvdlpcmdec/gstdvdlpcmdec.c:
* gst/synaesthesia/gstsynaesthesia.c:
Define GstElementDetails as const and also static (when defined as
global)
Original commit message from CVS:
* ext/dvdnav/dvdnavsrc.c: (gst_dvd_nav_src_push_titlelang_event):
Fix name of custom event (use same as dvdreadsrc).
* gst/dvdsub/gstdvdsubdec.c: (gst_dvd_sub_dec_chain),
(gst_dvd_sub_dec_sink_event), (gst_dvd_sub_dec_handle_dvd_event):
Fix event parsing (the event name is in the structure, not the
name of the structure itself); also fix indentation after
boilerplate macro.
Original commit message from CVS:
Patch by: Alexander Lancaster <alexl at users sourceforge net>
* ext/mad/gstid3tag.c: (gst_id3_tag_get_caps), (gst_id3_tag_init),
(gst_id3_tag_sink_event), (gst_id3_tag_src_link),
(gst_id3_tag_chain):
When acting as a muxer, set caps on outgoing buffers and set caps
on source pad (fixes#323658). Remove unused application/x-gst-tags
cruft from the 0.6 days.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_convert_sink), (gst_mad_convert_src),
(gst_mad_src_query), (gst_mad_chain):
.. and DEFAULT queries should work too. Use magic gst util scale
functions in some places.
Original commit message from CVS:
Patch by: Ed Catmur <ed at catmur dot co dot uk>
* ext/lame/gstlame.c: (gst_lame_sink_event):
Don't crash if we get an EOS event before the encoder
has been set up (#339287).
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_start),
(gst_dvd_read_src_goto_title), (gst_dvd_read_src_read),
(gst_dvd_read_src_create), (gst_dvd_read_src_goto_sector):
Move errors out of the normal code flow.
Don't send eos, basesrc will do that for us when needed.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer):
Can't use gst_pad_alloc_buffer*() when we are going to crop
the image before sending it out. Downstream basetransform-based
elements will complain about the wrong unit size otherwise
(when not operating in passthrough-mode at least).
Const-ify some static variables and do some minor clean-ups.
Use I420 macros for size/offsets (not really necessary in this
particular context, but this kind of code gets copy'n'pasted).
Original commit message from CVS:
add test for amrnbenc, enable test infrastructure, and fix a leak
* common/check.mak:
allow for specifying more than one suppressions file in SUPPRESSIONS
* Makefile.am:
* tests/Makefile.am:
* tests/check/.cvsignore:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* configure.ac:
add tests/check
* tests/check/gst-plugins-ugly.supp:
add suppressions for libs used by -ugly
* tests/check/elements/amrnbenc.c: (buffer_new), (buffer_unref),
(setup_amrnbenc), (cleanup_amrnbenc), (push_data),
(GST_START_TEST), (amrnbenc_suite), (main):
add a simple test for encoding amr
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_init):
fix pad template leaks
Original commit message from CVS:
* ext/mad/gstmad.c: (index_seek):
move GstIndexEntry *entry variable declaration before
the first instruction
* ext/mad/gstmad.c:
remove debug macros with variable number of parameter by using
GST_DEBUG for WIN32
* gst/dvdsub/gstdvdsubdec.c: (gst_dvd_sub_dec_parse_subpic):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_sync_stream_to_time):
replace __FUNCTION__ which is not supported by MSVC by the current function name
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_reset):
remove LL suffix by using G_GINT64_CONSTANT
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead),(gst_mpeg_parse_get_rate):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegparse.h:
remove LL suffix by using G_GINT64_CONSTANT
* win32/vs6:
add project files for tagac3parse, asfdemux, dvdlpcmdec, dvdsub, iec958, lame,
mad, mpegaudioparse, mpegstream, realmedia, synaesthesia
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_init),
(gst_dvd_read_src_goto_title), (gst_dvd_read_src_read):
Name the structure in the custom event with the
language codes for the audio and subtitle streams
actually like dvddemux expects it to be named.
Set caps on source pad and outgoing buffers.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_init), (gst_lame_set_property),
(gst_lame_get_property), (gst_lame_setup):
* ext/lame/gstlame.h:
Make xingheader property non-functional, it's broken anyway
after all (use xingmux instead).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event):
On EOS, flush encoder and send remaining data. Fix
return value handling in sink event function.
Original commit message from CVS:
Patch by: Jürg Billeter <j at bitron dot ch>
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_set_property):
Fix wrong check for started flag when setting the 'device' property.
We want to allow it when the source is NOT started yet and ignore it
when the source is running.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_sink_event),
(gst_a52dec_chain_raw), (gst_a52dec_change_state):
* ext/a52dec/gsta52dec.h:
Fix#334550: failure to play raw AC3 files due to segment problems.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_convert_sink), (gst_mad_update_info),
(gst_mad_sink_event), (gst_mad_change_state):
Include AUDIO_CODEC tag with tags posted if input is not
framed (#334258). Use _scale() util functions in more places.
Original commit message from CVS:
2006-03-12 Christophe Fergeau <teuf@gnome.org>
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/lame/gstlame.c: (gst_lame_class_init): mark the xing-header
property as BROKEN (see
http://bugzilla.gnome.org/show_bug.cgi?id=330317#c19 for an
explanation why it's broken).
Original commit message from CVS:
* ext/mad/gstid3tag.c: (tag_list_to_id3_tag_foreach):
Add support for writing the GST_TAG_ALBUM_VOLUME_NUMBER
tag (#333683, patch by: Alex Lancaster).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_init),
(gst_amrnbdec_setcaps), (gst_amrnbdec_chain),
(gst_amrnbdec_state_change):
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_init),
(gst_amrnbenc_setcaps), (gst_amrnbenc_chain),
(gst_amrnbenc_state_change):
* ext/amrnb/amrnbenc.h:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_init),
(gst_amrnbparse_query):
Further fancyfication.
Use _take to get writable data from the adapter.
Precalc packet duration.
Handle disconts.
Forward _push to upstream.
Post error messages when something goes wrong.
Remove old code in amrnbparse.
Don't ignore query results from upstream.
