Wim Taymans
44b418b346
media: init debug category before starting thread
2011-01-13 18:57:15 +01:00
Wim Taymans
9e97faf2db
server: improve debugging in various objects
2011-01-12 18:14:48 +01:00
Wim Taymans
7797023fda
media: enable per factory authorisations
...
Allow for adding a GstRTSPAuth on the factory and media level and check
permissions when accessing the factory.
Add hints to the auth methods for future more fine grained authorisation.
Add example application for per factory authentication.
2011-01-12 13:57:09 +01:00
Wim Taymans
e1787e0776
funnel: rename fsfunnel to rtspfunnel
...
Rename the funnel to avoid conflicts with the farsight one.
2011-01-10 15:10:53 +01:00
Wim Taymans
7b3cbfde1b
rtsp-media: add and use fsfunnel
...
Add a copy of fsfunnel to the build because input-selector removed the (broken)
select-all property that we need.
2011-01-10 13:43:10 +01:00
Wim Taymans
790c067919
media: attempt to configure bigger UDP buffers
...
Attempt to configure bigger udp kernel send buffers to avoid overflowing the
send buffers with high bitrate streams.
2011-01-05 12:06:23 +01:00
Wim Taymans
50b4c8de98
rtsp-server: add support for buffer lists
...
Add support for sending bufferlists received from appsink.
Fixes #635832
2010-12-29 16:26:41 +01:00
Wim Taymans
4234d96314
media: make method to retrieve the play range
...
Make a method to retrieve the playback range so that we can conditionally create
a different range for the SDP and the PLAY requests.
2010-12-28 18:35:01 +01:00
Wim Taymans
915cd708ea
media: add signal to notify of state changes
2010-12-28 18:34:10 +01:00
Wim Taymans
1ea450179e
media: emit prepared signal when prepared
...
Make a 'prepared' signal and emit it when we successfully prepared the element.
This signal can be used to configure the media object after it has been prepared
for streaming.
2010-12-17 18:45:10 +01:00
Wim Taymans
ca76a73ca0
media: update range when active clients changed
...
When we changed the number of active clients, update the current range
information because we want the second client connecting to a shared resource
continue from where the stream currently.
2010-12-12 15:48:47 +01:00
Wim Taymans
34f0973831
media: ignore spurious ASYNC_DONE messages
...
When we are dynamically adding pads, the addition of the udpsrc elements will
trigger an ASYNC_DONE. We have to ignore this because we only want to react to
the real ASYNC_DONE when everything is prerolled.
2010-12-11 18:04:34 +01:00
Edward Hervey
eb83fc6318
rtsp-server: Run gst-indent
...
Since it wasn't using the upstream common previously, there was no
indentation check before commiting.
2010-12-11 10:48:42 +01:00
Edward Hervey
b95165fcff
rtsp-server: Some more doc fixups
2010-12-11 10:48:25 +01:00
Wim Taymans
ed473f6f26
media: help the compiler a little
2010-09-22 16:15:56 +02:00
Wim Taymans
450b68252f
media: cleanup media transport before freeing
...
Cleanup the media transport data before freeing. In particular, remove the qdata
from the rtpsource object.
2010-08-24 16:47:30 +02:00
Wim Taymans
dc33070da3
media-factory: add eos-shutdown property
...
Add an eos-shutdown property that will send an EOS to the pipeline before
shutting it down. This allows for nice cleanup in case of a muxer.
Fixes #625597
2010-08-20 18:17:08 +02:00
Wim Taymans
a900866570
media: use multiudpsink send-duplicates when we can
...
If we have a new enough multiudpsink with the send-duplicates property, use this
instead of doing our own filtering. Our custom filtering code should eventually
be removed when we can depend on a released -good.
2010-08-20 15:58:39 +02:00
Wim Taymans
c89d17ca26
media: don't leak destinations
...
Refactor and cleanup the destinations array when the stream is destroyed.
2010-08-20 13:19:56 +02:00
Wim Taymans
7c0f8a77ec
media: don't add udp addresses multiple times
...
Keep track of the udp addresses we added to udpsink and never add the same udp
destination twice. This avoids duplicate packets when using multicast.
2010-08-20 13:09:12 +02:00
David Schleef
6a880e53df
Add stdlib.h for atoi()
2010-08-09 12:56:23 -07:00
Wim Taymans
09b97dd4ac
rtsp-server: add more support for multicast
2010-03-19 18:03:40 +01:00
Wim Taymans
ac8343ea62
media: allow configuration of allowed lower transport
2010-03-19 15:15:29 +01:00
Wim Taymans
e866345f15
rtsp: keep track of server ip and ipv6
...
Keep track of how the client connected to the server and setup the udp ports
with the same protocol.
Copy the server ip address in the SDP so that clients can send RTCP back to
us.
2010-03-16 18:37:18 +01:00
Wim Taymans
6afa5be799
media: allow for ipv6 sockets
2010-03-10 11:45:06 +01:00
Alessandro Decina
5f535ecf87
rtspmedia: emit "unprepared" if _prepare fails.
...
Emit the unprepared signal if gst_rtsp_media_prepare fails so that the
media object is removed from its factory's cache.
2010-03-09 10:27:38 +01:00
Wim Taymans
2997806d43
media: collect media position when seek completes
2010-03-05 19:08:08 +01:00
Wim Taymans
83ed258684
media: limit the time to wait to something huge
...
Avoid waiting forever but limit the timeout to 20 seconds.
2010-03-05 18:23:18 +01:00
Wim Taymans
c7ca9b74eb
media: avoid doing _get_state() for state changes
...
When preparing, use the ASYNC_DONE and ERROR messages in the bus handler to wait
until the media is prerolled or in error. This avoids doing a blocking call of
gst_element_get_state() that can cause lockups when there is an error.
Fixes #611899
2010-03-05 17:54:09 +01:00
Wim Taymans
d45eae2edd
media: reindent
2010-03-05 16:20:08 +01:00
Wim Taymans
53f8350b36
media: set multicast sink parameters
...
Disable loop and automatic multicast join on the udpsink elements.
Add some more debug info.
Reset some state variables in the right place.
Use the right port numbers for multicast.
2010-03-05 13:28:58 +01:00
Sebastian Pölsterl
6d227be7a9
Use GStreamer's debugging subsystem
2009-11-21 19:20:23 +01:00
Sebastian Pölsterl
f8630c6c81
media: Fixed crasher where caps got unref'ed too often
2009-10-13 10:57:31 +02:00
Wim Taymans
297b6a755a
media: add some docs
2009-09-11 13:52:27 +02:00
Wim Taymans
5d4c0e20c0
media: fix indentation
2009-06-18 16:05:18 +02:00
Sebastian Pölsterl
f384231ca3
Unref pipeline and set it to NULL. Set stream's caps to NULL, otherwise we unref it too often.
2009-06-18 15:54:15 +02:00
Sebastian Pölsterl
036550bf60
set state and remove elements of media in for loop
2009-06-18 15:54:11 +02:00
Sebastian
3bd2d36b1b
Added gst_rtsp_media_remove_elements function
2009-06-18 15:54:04 +02:00
Sebastian
1a3e5b369c
Don't use name for gstrtpbin so we can add multiple instances to the pipeline
2009-06-18 15:54:01 +02:00
Sebastian Pölsterl
749765b921
Added vmethod unprepare to GstRTSPMedia
...
The default implementation sets the state of the pipeline to GST_STATE_NULL
2009-06-18 15:53:49 +02:00
Sebastian Pölsterl
e417d83dce
Added vmethod create_pipeline to GstRTSPMediaFactory
...
The pipeline is created in this method and the GstRTSPMedia's element is added to it
2009-06-18 15:53:34 +02:00
Wim Taymans
94b6da045a
media: don't leak session pads
2009-06-04 19:20:26 +02:00
Wim Taymans
9a38f95417
media: clean up the messages a bit
2009-06-04 18:32:15 +02:00
Wim Taymans
03ae66062b
media: fix message
...
Fix a debug message
Make dumping RTCP stats configurable
2009-05-27 11:15:22 +02:00
Wim Taymans
3fc1439965
media: be less verbose and leak less
2009-05-26 19:20:07 +02:00
Wim Taymans
1340e21239
media: don't leak the destination address
2009-05-26 19:07:33 +02:00
Wim Taymans
9bed89c3b7
rtsp: use RTCP to keep the session alive
...
Use the RTCP rtcp-from stats field to find the associated session and use this
to keep the session alive.
2009-05-26 19:01:10 +02:00
Wim Taymans
5955fc7d12
media: keep track of active transports
...
Keep track of which transport is active to avoid closing the connection too
soon.
Remove the destination transport also when going to NULL.
Print some stats about the SDES and other RTCP messages we receive from the
clients.
2009-05-26 11:42:41 +02:00
Wim Taymans
7a8b931a83
media: also count active TCP connections
2009-05-24 19:56:45 +02:00
Wim Taymans
fab65082da
rtsp: add support for dynamic elements
...
Add support for dynamic elements.
Don't set live pipelines back to paused.
2009-05-24 19:34:52 +02:00