First check if downstream requests ANY caps. If so, byte-stream is
used and the profile will be choose by the encoder. If dowstream
requests EMPTY caps, the negotiation will fail.
Lately, byte-stream and profile are looked in the allowed caps.
https://bugzilla.gnome.org/show_bug.cgi?id=757941
The check for avc stream format was done in the vaapi encoder's
vmethod get_caps(), but that is wrong since it has to be check
when encoder set_format().
https://bugzilla.gnome.org/show_bug.cgi?id=757941
vaapipostproc didn't negotiate the proper multiview caps losing
downstream information.
This patch enables the playing of MVC encoded stream by setting
the proper multiview mode/flags and views to src caps, according
to sink caps.
https://bugzilla.gnome.org/show_bug.cgi?id=784320
There is another regression with 7a206923 when setting the video
info for the video meta, it should be the one from the image's
allocator rather from the allocation caps.
Test pipeline:
gst-launch-1.0 filesrc location=bug766184.flv ! decodebin \
! tee ! videoconvert ! videoscale \
! video/x-raw, width=1920, height=1080 ! xvimagesink
There is a regression in 7a206923, since the buffer pool ditches all
the buffers generated by them because the pool config size is
different of the buffer's size.
Test pipeline:
gst-launch-1.0 filesrc location=big_buck_bunny_1080p_h264.mov \
! qtdemux ! vaapih264dec ! vaapipostproc ! xvimagesink \
--gst-debug=GST_PERFORMANCE:5
The allocator may update the buffer size according to the VA surface
properties. In order to do this, the video info is modified when the
allocator is created, which reports through the allocation info the
updated size, and set it to the pool config.
Refactor the set_config() virtual method considering a cleaner
approach to allocator instanciation, if it it not set or if it is
not valid for the pool.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
The vaapi video decoders might have different allocation caps from
the negotiation caps, thus the GstVideoMeta shall use the negotiation
caps, not the allocation caps.
This was done before reusing gst_allocator_get_vaapi_video_info(),
storing there the negotiation caps if they differ from the allocation
ones, but this strategy felt short when the allocator had to be reset
in the vaapi buffer pool, since we need both.
This patch adds gst_allocator_set_vaapi_negotiated_video_info() and
gst_allocator_get_vaapi_negotiated_video_info() to store the
negotiated video info in the allocator, and distinguish it from
the allocation video info.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
Renamed local video info structure names in set_config() vitual
method. The purpose of their renaming is to clarify the origin
of those structures, whether come from passed caps parameter
(new_allocation_vinfo) or from the configured allocator
(allocator_vinfo).
https://bugzilla.gnome.org/show_bug.cgi?id=783599
Renamed private GstVideoInfo structure video_info to allocation_vinfo
and alloc_info to negotiated_vinfo.
The purpose of these renaming is to clarify the origin and purpose of
these private variables:
video_info (now allocation_vinfo) comes from the bufferpool
configuration. It describes the physical video resolution to be
allocated by the allocator, which may be different from the
negotiated one.
alloc_info (now vmeta_vinfo) comes from the negotiated caps in
the pipeline. It represents how the frame is going to be mapped
using the video meta.
In Intel's VA-API backend, the allocation_vinfo resolution is
bigger than the negotiated_info.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
When state of vaapisink is changed from PLAYING to NULL, the handle_events
flag is set to FALSE, and never recovered, and then event thread is never
going to run.
So we should allow to set the flag only when users try it.
https://bugzilla.gnome.org/show_bug.cgi?id=782543
Handles new custom event GstVaapiEncoderRegionOfInterest
to enable/disable a ROI region.
Writes a way to use new event to document.
https://bugzilla.gnome.org/show_bug.cgi?id=768248
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
This bin should have similar classification as decodebin which is
"Generic/Bin/Decoder" otherwise it will appear wrongly as video
decoder.
Signed-off-by: Victor Toso <victortoso@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=782063
When downstream negotiates a pixel-aspect-ratio of 0/1, the
calculations for resizing and formatting in vaapipostproc and
vaapisink, respectively, failed, and thus the pipeline.
This patch handles this situation by converting p-a-r of 0/1 to
1/1. This is how other sinks, such as glimagesink, work.
https://bugzilla.gnome.org/show_bug.cgi?id=781759
Since it's created by itself, it should be unref-counted
after gst_buffer_pool_config_set_allocator call. Afterwards,
this allocator will be ref-counted again when assigning to priv->allocator.
https://bugzilla.gnome.org/show_bug.cgi?id=781577
Sometimes a video decoder could set different buffer pool
configurations, because their frame size changes. In this case we
did not reconfigure the allocator.
This patch enables this use case, creating a new allocator inside
the VAAPI buffer pool if the caps changed, if it is not dmabuf-based.
If so, it is just reconfigured, since it doesn't have a surface pool.
https://bugzilla.gnome.org/show_bug.cgi?id=781577
Direct rendering (use vaDeriveImage rather than vaPutImage) has better
performance in some Intel platforms (Haswell, for example) but in others
(Skylake) is the opposite.
In order to have some control, the patch enables the direct rendering
through the environment variable GST_VAAPI_ENABLE_DIRECT_RENDERING.
Also it seems to generating some problems with gallium/radeon backend.
See bug #779642.
https://bugzilla.gnome.org/show_bug.cgi?id=775848
Clear decoders out on a flush but keep the same instance,
rather than completely recreating them. That avoids
unecessarily freeing and recreating surface pools
and contexts, which can be quite expensive
https://bugzilla.gnome.org/show_bug.cgi?id=781142
When these definitions are false, they are undef in the
preprocessor, not a defined value of 0. When they are unset the
compile fails with:
'GST_GL_HAVE_WINDOW_WAYLAND' undeclared (first use in this function)
https://bugzilla.gnome.org/show_bug.cgi?id=780948
This new virtual method, get_profile(), if implemented by specific
encoders, will return the VA profile potentially determined by the
source caps.
Also it is implemented by h264 and h265 encoders, which are the main
users of this vmethod.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
In order to get the supported surface formats within a specific
profile this patch adds the GstVaapiProfile as property to
gst_vaapi_encoder_get_surface_formats().
Currently the extracted formats are only those related with the
default profile of the element's codec.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
As in gstreamer-vaapi a common base class is used, the specific
default category is passed to the base-plugin initializator, thus
the log messages are categorized with the used plugin.
Nonetheless, when the gst-debug is disabled in compilation time,
it is needed to pass NULL to the base-plugin initializator. This
patch does that.
https://bugzilla.gnome.org/show_bug.cgi?id=780302
Particularly in GNOME Wayland, the negotiated or created GL context
defines a GLX environment, but VAAPI fails to create a GLX VA
display because there is no a DRI2 connection.
This patch retries to create the VA display if VA cannot create one
with the GL context parameters. Now using the old list of display
types.
This should also work in the case of systems with two GPU, when the
non-VAAPI has the graphics environment, and the VAAPI-enabled one
shall work headless.
https://bugzilla.gnome.org/show_bug.cgi?id=772838
Removes GstVideoGLTextureUploadMeta caps feature if the driver
doesn't support opengl.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=772838
Rename to be consistent with H.264 and also H.265 encoder. The
meson build assumed this was already consistently named, and so
previously was not able to actually build the H.265 decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=778576
When dmabuf is negotiated downstream and decoding and rendering are
not done on the same device, the layout has to be linear in order for
the memory to be shared accross devices, since each device has its
own way to do tiling.
Right now this code is rather just a to-do comment, since we are not
fetching the device ids.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
Use new -base API gst_video_decoder_allocate_output_frame_full() to
pass the current proxy/surface to the pool.
The pool will will export thins given surface instead of exporting a
brand new surface that will never be filled in with meaningfull data.
https://bugzilla.gnome.org/show_bug.cgi?id=755072