The repeat first field flag was introduced in 0.5.0 so conditionally disable its
detection and just assume no rff is used. This fixes the compilation.
Fixes#582375
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format):
Last change introduced a regression that made mpeg2dec handle
some 4:2:2 videos as 4:4:4. Fixes bug #562086.
Original commit message from CVS:
Patch by: Simon Holm Thøgersen <odie at cs dot aau dot dk>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_chain):
Add support for the STATE_SEQUENCE_MODIFIED state in mpeg2dec
>= 0.5.0. Fixes bug #562065.
Original commit message from CVS:
Patch by: Robin Stocker <robin at nibor dot org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(handle_sequence), (gst_mpeg2dec_setcaps):
* ext/mpeg2dec/gstmpeg2dec.h:
Prefer the container's PAR over the stream's PAR if it's
given in the srcpad caps. Fixes bug #556184.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence):
Don't allow width/height outside the spec (i.e. smaller than 16
and higher than 4096). Such files are corrupted ones and setting
caps that are not a subset of the template caps confuses playbin.
Fixes bug #542646.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c:
Reset decoder when handling sequence where libmpeg2 has set
frame period to 0, probably due to a corrupt packet.
Fixes bug #514297
Original commit message from CVS:
* configure.ac:
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer):
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_descramble_buffer):
* gst/dvdlpcmdec/gstdvdlpcmdec.c: (gst_dvdlpcmdec_chain_raw):
Fix build against core CVS by not using deprecated API. Bump
requirements for new API (overdue anyway).
Original commit message from CVS:
Patch by: Zaheer Abbas Merali <zaheermerali at gmail com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_chain):
Never post a (fatal) error message on the bus on decoding errors. We
should only do this if we can't recover, but mpeg2dec can always
recover. This is needed for DVB streams, for example, where there
may be temporary glitches in the stream. Instead of an error
message, post a warning message on the bus for every N decoding
errors. Fixes#370020.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Align buffers to a 16 byte boundary so the altivec optimisations
don't crash. Fixes#327350.
Original commit message from CVS:
Patch by: Jan Arne Petersen <jpetersen at jpetersen dot org>
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence), (handle_slice):
Simplify the framerate code and support more framerates. Fixes#361584.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init):
Fix minor memleak when creating pads from static pad templates (#369627).
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/mpeg2dec.c: (setup_mpeg2dec),
(cleanup_mpeg2dec), (GST_START_TEST), (mpeg2dec_suite), (main):
Add unit tests for mpeg2dec (#369627).
Original commit message from CVS:
Patch by: Sebastian Droege <slomo at ubuntu dot com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_finalize),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
libmpeg2 requires its output buffers to start at a 16byte aligned
address or the altivec optimizations will explode.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Add some debugging to timestamp handling.
Make sure we don't convert invalid timestamps.
Original commit message from CVS:
Patch by: Yves Lefebvre <ivanohe at abacom dot com>
* ext/mpeg2dec/gstmpeg2dec.c: (init_dummybuf):
Fix initialisation dummy buffer, the offsets are relative to the start
of the buffers. Fixes#356004.
Original commit message from CVS:
* ext/lame/Makefile.am:
* ext/mpeg2dec/Makefile.am:
* gst/dvdlpcmdec/Makefile.am:
* gst/dvdsub/Makefile.am:
* gst/mpegaudioparse/Makefile.am:
Add missing GST_LIBS to the link flags
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format):
Assume pixel-aspect-ratio of 4:3 if libmpeg2dec doesn't give us
any PAR whatsoever (rather than using 0/0, which will lead to
an abort later on). Fixes#345184.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_finalize),
(gst_mpeg2dec_reset), (clear_buffers), (handle_picture),
(gst_mpeg2dec_sink_convert), (gst_mpeg2dec_src_convert),
(gst_mpeg2dec_change_state):
* ext/mpeg2dec/gstmpeg2dec.h:
Simplify and don't leak our buffer pool.
Use _scale_int.
Remove unfixed bug number from previous ChangeLog entry.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_base_init),
(gst_mpeg2dec_class_init), (gst_mpeg2dec_init),
(gst_mpeg2dec_finalize), (gst_mpeg2dec_reset),
(gst_mpeg2dec_qos_reset), (gst_mpeg2dec_alloc_buffer),
(gst_mpeg2dec_negotiate_format), (init_dummybuf),
(handle_sequence), (handle_picture), (handle_slice),
(gst_mpeg2dec_chain), (gst_mpeg2dec_sink_event),
(gst_mpeg2dec_src_event), (gst_mpeg2dec_change_state):
* ext/mpeg2dec/gstmpeg2dec.h:
Fix padtemplate as we can now do fractional framerates.
Small cleanups.
Use GstSegment.
Add simple frame dropping QoS.
Precalc buffer output sizes and UV offsets.
Always give libmpeg2 a valid fbuf when it wants one.
don't trust libmpeg to discard our buffers but manage it
ourselves.
Fixes#343627, #327350, #335288
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_sink_convert),
(gst_mpeg2dec_src_query):
Remember the query duration format before passing it upstream since it
could have been modified.
Add GST_WARNING_OBJECT in sink convert function to detail why the
conversion didn't work.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer):
Can't use gst_pad_alloc_buffer*() when we are going to crop
the image before sending it out. Downstream basetransform-based
elements will complain about the wrong unit size otherwise
(when not operating in passthrough-mode at least).
Const-ify some static variables and do some minor clean-ups.
Use I420 macros for size/offsets (not really necessary in this
particular context, but this kind of code gets copy'n'pasted).
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_chain):
* ext/mpeg2dec/gstmpeg2dec.h:
Don't treat STATE_INVALID as fatal error; throw an error
only after five consecutive decoding errors. Makes decoding
mpeg streams more robust and fixes playback of joined clips
(#300682).
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (crop_copy_i420_buffer),
(crop_copy_i422_buffer), (crop_buffer):
When we need to crop the output buffer, make sure we
create a buffer of the right size and respect the implicit
striding used for I420 elsewhere in GStreamer (#331301).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_setcaps),
(gst_amrnbdec_chain), (gst_amrnbdec_state_change):
Some more comments.
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer), (handle_slice):
Applied patch from Fabrizio Gennari, fixes#330844.
Original commit message from CVS:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_query):
* ext/mad/gstid3tag.c: (gst_id3_tag_src_query):
* ext/mad/gstmad.c: (gst_mad_src_query):
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_src_query):
* ext/sidplay/gstsiddec.cc:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_handle_src_query):
* gst/realmedia/rmdemux.c: (gst_rmdemux_src_query):
Pass unhandled queries upstream (useful e.g. for SEEKING query)
(fixes#325652; based on patch by: Philippe); make rmdemux return
FALSE for position queries, instead of setting -1 as value and
returning TRUE.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_src_event):
When getting a seek event, first check if the upstream element
can handle it and only do our own seek stuff when it can't
(should fix#322856).
