Don't reuse sockets but make the udpsrc element fail the state change when the
socket is already in use. If we don't prevent reuse, we might end up using the same
port for different streams in some cases.
Fixes#622017
To support setups with firewall/ipsec, it is useful for an rtsp client to be
able to set the range of ports that can be used for rtp/rtcp reception.
Allows this by adding a "port-range" property to the rtspsrc element.
Fixes#625153
The RTSP server rtspsrc is communicating with, sends a GET_PARAMETER request
periodically as a ping. The code in gst_rtspsrc_handle_request forms an OK
response and sends, but doesn't call gst_rtsp_message_unset to free the memory
after sending the response. This results in a constant slow memory leak.
Fixes#624770
Keep a global connection for aggregate control but also keep stream connections
for non-aggregate control.
Add some helper methods to connect/close/flush the connections.
Parse the connection info from the SDP.
When we need to configure the multicast destination, fall back to the SDP
connection info when the transport did not specify a destination and ttl.
Fixes#617537
Pass the current running time to the jitterbuffer when pausing or resuming so
that it calculate the right offsets.
Small cleanups and comments.
Set the default rtspsrc latency to 2 seconds.
Fix some comments, clarify some FIXMEs
Remove the on-ntp-stop signal check now that the jitterbuffer is in
-good and we know that it supports this signal.
When an RTSP extension returns NULL or an empty transport string, just ignore it
and try to get the next possible transport. Fixes playback of RealMedia streams.
In gst_rtspsrc_parse_digest_challenge(), rtspsrc does a g_strndup of the auth
header items and then passes them to gst_rtsp_connection_set_auth_param()
without freeing.
Fixes#594133
Server eof (e.g. connection closed) is announced as connection closed,
so better record state and act accordingly to prevent (read/write)
errors during subsequent teardown/cleanup sequences. #Fixes 580851.(c).
The on-npt-stop signals was added only recently to rtpjitterbuffer in
-bad, so check if the signal exists before g_signal_connect()ing to
it, to avoid warnings.
Try to post a decent error message when it looks like we're failing
because the Real RTSP extension plugin is missing. Also add i18n
bits for rtspsrc so our error messages get translated.
MS RTSP spec states that the UDP port pair used in subsequent SETUP
requests for various streams must be identical (since there will actually
be only 1 stream of muxed asf packets). Following traditional specs and
using different port pairs in the SETUPs for separate streams will result
in all but the first one failing and only one stream being streamed.
So, in appropriate circumstances, retry UDP SETUP using previously used
port pair. Fixes#552650.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Original commit message from CVS:
Patch by: 이문형 <iwings at gmail dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_loop_udp):
Prevent further read/write actions taken to the connect-failed socket by
erroring out quickly. See #562258.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (new_session_pad),
(gst_rtspsrc_parse_range):
Add some more debugging.
Use the reanges received from the server unconditionally.
Fixes#561625.
Original commit message from CVS:
* gst/rtsp/Makefile.am:
* gst/rtsp/gstrtsp.c: (plugin_init):
* gst/rtsp/gstrtspgoogle.c:
* gst/rtsp/gstrtspgoogle.h:
Remove google extension again, it's not needed anymore because we never
send multiple transports anymore.
Original commit message from CVS:
Based on patch by: Eric Zhang <chao.zhang at access-company dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtsp_nat_method_get_type),
(gst_rtspsrc_class_init), (gst_rtspsrc_set_property),
(gst_rtspsrc_get_property), (gst_rtspsrc_create_stream),
(gst_rtspsrc_stream_free),
(gst_rtspsrc_stream_configure_udp_sinks),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_send_dummy_packets),
(gst_rtspsrc_create_transports_string),
(gst_rtspsrc_handle_message), (gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
Add property to configure NAT traversal method.
Ignore EOS from the internal sinks.
Implement sending dummy packets as a (simple) method to open up
some firewalls.
Send PLAY request to the server after we started the udp sources.
Fixes#559545.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_transports_string),
(gst_rtspsrc_change_state):
Only send one transport at a time for improved compatibility with some
broken servers. See #537832.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_do_seek),
(gst_rtspsrc_perform_seek):
Only pause/play in the seek handler when the source was playing.
Fixes#529379.
Original commit message from CVS:
Based on patch by: Eric Zhang <chao.zhang at access-company dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_perform_seek),
(gst_rtspsrc_stream_configure_udp_sink):
Pause the RTSP stream before doing a new play request.
Make sure that adding the udpsinks does not cause the rtspsrc to become
a sink. Fixes#559547.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_handle_src_event):
Return TRUE instead of FALSE from the event handler when we swallowed the
event.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_parse_methods):
Don't assume the server supports PAUSE by default. Fixes#551048.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_open):
Handle the case where we cannot do desribe or when the describe result
does not contain a valid SDP message.
Original commit message from CVS:
* gst/rtsp/gstrtspgoogle.c:
Things that can happen when your brain is in google mode trying to
deal with their google rtsp server extensions and trying to type your
google mail account.
Original commit message from CVS:
* gst/rtsp/Makefile.am:
* gst/rtsp/gstrtsp.c: (plugin_init):
* gst/rtsp/gstrtspgoogle.c: (gst_rtsp_google_before_send),
(gst_rtsp_google_after_send), (gst_rtsp_google_get_transports),
(_do_init), (gst_rtsp_google_base_init),
(gst_rtsp_google_class_init), (gst_rtsp_google_init),
(gst_rtsp_google_finalize), (gst_rtsp_google_change_state),
(gst_rtsp_google_extension_init):
* gst/rtsp/gstrtspgoogle.h:
Add google RTSP extension, it can only handle udp and responds with
unsupported if we do anything else. Fixes#546465.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_connection_send),
(gst_rtspsrc_connection_receive), (gst_rtspsrc_loop_send_cmd),
(gst_rtspsrc_create_transports_string),
(gst_rtspsrc_setup_streams), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_pause):
Make transport setup code a bit better using GString.
Add some more debug.
Check for closed connections before doing anything on them.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_configure_udp_sink):
Don't try to configure RTCP back to the server when the server did not
give us a valid port number.
Original commit message from CVS:
* gst/rtsp/URLS:
Add another URL.
* tests/check/elements/id3v2mux.c: (test_taglib_id3mux_with_tags):
* tests/check/elements/rglimiter.c: (GST_START_TEST):
Add some more debug info.
Original commit message from CVS:
* gst/rtp/gstrtpvrawdepay.c:
Include stdlib.h for atoi().
* gst/rtsp/gstrtspsrc.c:
Use floating point math for latencies < 0 sec in log output.
Original commit message from CVS:
* gst/rtsp/URLS:
Some more urls.
* gst/smpte/barboxwipes.c:
Add a comment
* tests/examples/rtp/server-v4l2-H264-alsasrc-PCMA.sh:
Fix typo, add audioresample to the pipeline.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_configure_mcast):
Set udpsrc for receiving data from multicast groups to PAUSED instead of
leaving them in READY. Fixes#537832.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_configure_udp_sink):
Use the new gst_rtsp_connection_get_ip() to access the IP address
of a GstRTSPConnection since it is a private member.
Original commit message from CVS:
Based on patch by: Wouter Cloetens <wouter at mind be>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init),
(gst_rtspsrc_skip_lws), (gst_rtspsrc_unskip_lws),
(gst_rtspsrc_skip_commas), (gst_rtspsrc_skip_item),
(gst_rtsp_decode_quoted_string),
(gst_rtspsrc_parse_digest_challenge), (gst_rtspsrc_parse_auth_hdr),
(gst_rtspsrc_setup_auth):
Support Digest authentication. Fixes#532065.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init), (request_pt_map),
(gst_rtspsrc_configure_caps):
Ref caps as the return value for the request_pt_map signal.
Remove some caps weirdness when configuring a stream. See #528245.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_init),
(gst_rtspsrc_finalize):
Call WSAStartup() and WSACleanup before using the Winsock API.
See #520808.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_setup_streams):
Post the server response code in an error message instead of a generic
'error' message. Fixes#517237.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_stream):
Init values to -1 instead of the default 0 value.
Fixes#516524.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c:
Include unistd.h only if HAVE_UNISTD_H is defined
* win32/common/config.h.in:
* win32/common/config.h:
Define socklen_t as it seems it's not defined in default
Visual Studio headers.
* win32/vs6/libgstalpha.dsp:
* win32/vs6/libgstapetag.dsp:
* win32/vs6/libgstavi.dsp:
* win32/vs6/libgstrtp.dsp:
* win32/vs6/libgstrtsp.dsp:
* win32/vs6/libgstvideomixer.dsp:
Update project file dependencies and add new source files
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_parse_rtpinfo):
Use g_ascii_strtoll() instead of atoll, which is only
available in C99.
Original commit message from CVS:
As found by: Tommi Myöhänen <ext-tommi.myohanen nokia com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_parse_rtpinfo):
Use atoll to parse the rtptime with enough precision. Fixes#509329.
Original commit message from CVS:
* gst/avi/gstavisubtitle.c: (gst_avi_subtitle_extract_file):
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send):
Initialise variables to work around (false) 'foo might be used
uninitialized in this function' warnings by gcc-3.3.3 (#509298).
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open):
* gst/rtsp/gstrtspsrc.h:
Implement redirect for the DESCRIBE reply. Fixes#506025.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_setup_streams):
Fix some more leaks. Fixes#497007.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_free),
(gst_rtspsrc_stream_configure_tcp):
Fix 3 pad leaks. Fixes#496983.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_handle_src_event),
(gst_rtspsrc_parse_range):
Don't leak event, don't leak range (fixes#496752).
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_loop_interleaved):
Fix race when pausing a RTSP stream in interleaved.
Fixes#475784.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_flush):
Fix compiler warning by using GST_CLOCK_TIME_NONE to initialise
a GstClockTime.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_flush),
(gst_rtspsrc_do_seek), (gst_rtspsrc_perform_seek),
(gst_rtspsrc_configure_caps), (gst_rtspsrc_loop_udp),
(gst_rtspsrc_parse_range), (gst_rtspsrc_open), (gst_rtspsrc_play),
(gst_rtspsrc_change_state):
More seeking fixes, mostly passing around the new playback segment in
order to configure it properly.
Also reset base_time of udp sources when setting them back to PLAYING as
a temporary hack until core supports seek in live sources properly.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_flush),
(gst_rtspsrc_perform_seek), (gst_rtspsrc_handle_src_event),
(gst_rtspsrc_handle_internal_src_query),
(gst_rtspsrc_handle_src_query), (new_session_pad),
(gst_rtspsrc_stream_configure_tcp),
(gst_rtspsrc_stream_configure_transport),
(gst_rtspsrc_loop_send_cmd):
Improve flushing behaviour.
Set state of the udp sources to PAUSE/PLAYING correctly.
Handle events and queries for UDP and TCP transport now.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_get_bandwidth),
(gst_rtspsrc_collect_bandwidth), (gst_rtspsrc_create_stream),
(gst_rtspsrc_media_to_caps), (gst_rtspsrc_loop_interleaved):
* gst/rtsp/gstrtspsrc.h:
Parse bandwidth modifiers, they are not yet configured in the session
manager because we don't have an API for that yet.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_parse_rtpmap),
(gst_rtspsrc_media_to_caps), (gst_rtspsrc_loop_interleaved):
Use shiny new function in -base to get the default clock-rate.
Update some docs.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_play):
* gst/rtsp/gstrtspsrc.h:
In TCP mode, only timestamp the first buffer. TCP is not real time and
it does not make sense to try to skew compensate, also some servers send
the first batch of data in a burst.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_create_stream),
(gst_rtspsrc_handle_src_query), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_loop_udp), (gst_rtspsrc_close):
* gst/rtsp/gstrtspsrc.h:
Set timestamps on RTP buffers in interleaved mode.
Mark first buffers with a DISCONT.
Remove flush hack now that sync for live sources has been figured out.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_setup_streams),
(gst_rtspsrc_dup_printf):
Give meaningfull error when all streams failed to configure for some
reason.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_stream_configure_udp_sink),
(gst_rtspsrc_dup_printf):
Use new basesink async property to make sparse RTCP packet not wait for
preroll.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_dup_printf),
(gst_rtspsrc_get_float), (gst_rtspsrc_play):
Make sure we generate and parse floating point values in the POSIX
locale instead of the current locale.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_do_seek),
(gst_rtspsrc_parse_methods), (gst_rtspsrc_open),
(gst_rtspsrc_play):
* gst/rtsp/gstrtspsrc.h:
Fix method detection again.
Keep track of when we must send a Range header.
Use segment values for Range, Speed and Scale headers.
Parse Speed and Scale headers to update the segment values.
Original commit message from CVS:
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_loop_udp), (gst_rtspsrc_loop_send_cmd),
(gst_rtspsrc_loop):
Refactor the udp and interleaved loop function a bit.
