Commit graph

38 commits

Author SHA1 Message Date
Jan Alexander Steffens (heftig)
2dbd89b036 tsmux: Move out parameters of tsmux_write_ts_header
Move them to the end of the parameter list and also allow passing NULLs
to ignore the payload information, but assert that the payload length is
zero in this case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5496>
2023-10-19 22:34:27 +00:00
Jan Alexander Steffens (heftig)
5128975a36 tsmux: Fix two more uses of gst_buffer_map
The buffers should be used for writing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5496>
2023-10-19 22:34:27 +00:00
Jan Alexander Steffens (heftig)
8a7d0efd96 tsmux: Fix error handling in pad_stream
Don't leak the map or the buffer if we encounter an error.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5490>
2023-10-16 15:46:00 +02:00
Jan Alexander Steffens (heftig)
b1810d83bc tsmux: Fill padding packets with stuffing bytes
Instead of leaving it uncleared, emitting probably old packet data but
potentially also random or sensitive application data.

Also fix the mapping mode.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5490>
2023-10-16 15:46:00 +02:00
Aaron Boxer
a72ca72a27 mpegtsmux: add stream-number property on GstBaseTsMuxPad
This new property allows setting of PES stream number for AAC audio
and AVC video streams.

The stream number is subject to the following constraints:

1. it must be between 0 and 15 for video
2. it must be between 0 and 31 for audio

Currently the PES stream number is hard-coded to zero for these
stream types.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4822>
2023-06-15 10:34:25 +00:00
Jan Alexander Steffens (heftig)
6e9d67bbc1 mpegtsmux: Use terminological ISO 639-2 language codes
These are preferred in most circumstances.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2649
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4795>
2023-06-12 08:51:10 +00:00
Vivia Nikolaidou
0e62bb2ba6 basetsmux: Fix language crash when ts_pad->stream is NULL
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4785>
2023-06-07 16:58:38 +00:00
Vivia Nikolaidou
395e0c3925 tsmux: Resend PMT whenever the language changes
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4711>
2023-06-01 17:05:11 +00:00
Vivia Nikolaidou
1781b26ad2 tsmux.h: Remove TSMUX_MAX_ES_INFO_LENGTH dead code
Also TsMux.es_info_buf which was also not used anywhere

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4681>
2023-05-23 14:00:11 +00:00
Vivia Nikolaidou
9e84b737cb tsmux: Separate DVB and ATSC AC3 descriptors
The previous code was ATSC-specific. Separated it into gstatscmux.c and
added the DVB-specific one from ETSI EN 300 468 V1.11.1 (2010-04)

https://www.etsi.org/deliver/etsi_en/300400_300499/300468/01.11.01_60/en_300468v011101p.pdf

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4681>
2023-05-23 14:00:11 +00:00
Vivia Nikolaidou
866d5d87c4 tsmux: Refactor AC3 descriptor to use GstByteWriter
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4681>
2023-05-23 14:00:11 +00:00
Vivia Nikolaidou
637e263504 tsmux: Parse bitrate from tags into the stream
Instead of parsing a hardcoded zero and always writing the highest
limit.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4681>
2023-05-23 14:00:11 +00:00
Vivia Nikolaidou
7a98a4214b tsmux: Fix 0x81 descriptor for AC3 streams
According to ATSCA/52:2018

https://prdatsc.wpenginepowered.com/wp-content/uploads/2021/04/A52-2018.pdf

Used wireshark as ground truth for detection/parsing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4681>
2023-05-23 14:00:11 +00:00
Sebastian Dröge
9d2ac6e90b mpegtsmux: Allow writing arbitrary Opus channel mapping families and up to 255 channels
And fix writing of dual-mono special cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4180>
2023-03-23 08:46:50 +00:00
Tim-Philipp Müller
85eb323b08 mpegtsmux: drop use of GSlice allocator
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:07 +00:00
Thibault Saunier
6a4425e46a meson: Call pkgconfig.generate in the loop where we declare plugins dependencies
Removing some copy pasted code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Sebastian Dröge
bf79a6908c tsmux: Make sure to set srcpad caps under all conditions before outputting the first buffer
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1218

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2438>
2022-05-18 12:19:07 +00:00
Sebastian Dröge
52c419b799 mpegtsmux: Disable aggregator's default negotiation
mpegtsmux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.

By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
2022-05-05 17:41:58 +00:00
Matthew Waters
6f95f7263f mpegts: don't shadow res variable
Fixes unused-but-set warning:

../gst/mpegtsmux/gstbasetsmux.c:2115:43: error: variable 'res' set but not used [-Werror,-Wunused-but-set-variable]
      gboolean all_headers, done = FALSE, res = FALSE;
                                          ^

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2046>
2022-03-28 10:30:23 +00:00
Jan Alexander Steffens (heftig)
95ff949eff mpegtsmux: Start last_ts with GST_CLOCK_TIME_NONE
And use the output segment position for the outgoing timestamp while it
is. This is needed to delay the calculation of `output_ts_offset` until
we actually have a usable timestamp, as tsmux will output a few initial
packets while `last_ts` is still unset.

Without this, the calculation would use the initial `0` value, which did
not have the intended effect of making VBR mode behave like CBR mode,
but always calculated an offset equal to the selected start time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1884>
2022-03-08 10:57:44 +00:00
Jan Alexander Steffens (heftig)
e5dbf86a54 mpegtsmux: Use GST_CLOCK_STIME_NONE for output_ts_offset
It's a GstClockTimeDiff, thus GST_CLOCK_TIME_NONE isn't appropriate.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1884>
2022-03-08 10:57:44 +00:00
Vivia Nikolaidou
7cebd5b359 tsmux: Skip empty buffers
They can be created e.g. by aggregator when there is a gap. Such buffers
should not be muxed at all.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1611>
2022-02-25 21:29:43 +00:00
Vivia Nikolaidou
e0d5e022a1 tsmux: Lock mux->tsmux, the programs hash table, and pad streams
They contain implementations that are not thread-safe (e.g. GList, GHashTable).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1616>
2022-02-25 17:42:52 +00:00
Jan Alexander Steffens (heftig)
2f7ec968f4 tsmux: Allow specifying PMT order via the prog-map
Look for an entry `PMT_<PID>` in the `prog-map`, which specifies the
relative index of the stream in the PMT.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Jan Alexander Steffens (heftig)
22fb7b7b71 tsmux: Deterministically order program streams by PID
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Jan Alexander Steffens (heftig)
b7ae1fa683 tsmux: Deterministically order PAT programs by number
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Jan Alexander Steffens (heftig)
853178894e tsmux: Remove program_array_index
It's only used for removal. Let's just scan the array.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Jan Alexander Steffens (heftig)
2acaa3940a tsmux: Replace streams GArray with GPtrArray
This is more appropriate.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1510>
2022-01-24 15:37:46 +00:00
Tim-Philipp Müller
ea8dc0c737 Couple more g_memdup() -> g_memdup2() fixes
Fixes deprecation warnings with newer GLib versions.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1279>
2021-10-30 10:37:37 +01:00
Jan Alexander Steffens (heftig)
320bc6362b mpegtsmux: Avoid crash when best pad gets flushed
The 'best' pad might receive a flush event between us picking it and us
popping the buffer. In this case, the buffer will be missing.

Similar to https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/711

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1042>
2021-10-19 01:46:19 +00:00
Vivia Nikolaidou
95eb8672a6 basetsmux: Support for caps changes
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/981>
2021-10-18 15:37:41 +00:00
Jan Alexander Steffens (heftig)
a8ebf72627 basetsmux: Clean up gst_base_ts_mux_create_stream
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/981>
2021-10-18 15:37:40 +00:00
Seungha Yang
90e5e0efea mpegtsmux: basetsmux: Don't try to return value from void function
gstbasetsmux.c(1508): warning C4098: 'free_splice': 'void' function returning a value

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1018>
2021-10-04 13:37:09 +00:00
Mathieu Duponchelle
555a5ea9dd basetsmux: use private copy of g_ptr_array_copy
This function is only present since glib 2.62

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/913>
2021-09-25 01:29:38 +00:00
Mathieu Duponchelle
c2eeb639b0 basetsmux: fix SCTE pts_adjustment with offsets
When there are elements between the demuxer and the muxer that
introduce an offset to the running time, or when offsets are
set on pads by the application, this shift must be taken into
account when calculating the final pts_adjustement.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/913>
2021-09-25 01:29:38 +00:00
Mathieu Duponchelle
c3a161f287 basetsmux: rework SCTE section handling to handle passthrough
mpegtsmux can receive SCTE sections from two origins: events
created by the application, and events forwarded downstream by
mpegtsdemux, containing sections that may not have been fully
parsed, and additional data to help tsmux translate times to
the correct domain, both for requesting keyframes and calculating
an accurate pts_adjustment.

The complete approach is documented further in a comment above
the relevant function.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/913>
2021-09-25 01:29:38 +00:00
Mathieu Duponchelle
be4d0fff23 basetsmux: extend SCTE 35 support
Makes it possible to support passing SCTE 35 cue points from
demuxer to muxer, while preserving correct timing.

This will also improve ex nihilo cue points injection, as splice
times and durations are now interpreted as running time values,
and may trigger key unit requests.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/913>
2021-09-25 01:29:37 +00:00
Thibault Saunier
019971a3c7 Move files from gst-plugins-bad into the "subprojects/gst-plugins-bad/" subdir 2021-09-24 16:14:36 -03:00