If ctts (CompositionOffsetBox) has larger sample_offset
(offset between PTS and DTS) than (2 * duration) of the stream,
assume the ctts box to be corrupted and ignore the box.
https://bugzilla.gnome.org/show_bug.cgi?id=797262
... before the old streams is not exposed yet for MSS stream.
In case of DASH, newly configured streams will be exposed
whenever demux got moov without delay.
Meanwhile, since there is no moov box in MSS stream,
the caps will act like moov. Then, there is delay for exposing new pads
until demux got the first moof.
So, following scenario is possible only for MSS but not for DASH,
STREAM-START -> CAPS -> (configure stream but NOT EXPOSED YET)
-> STREAM-START-> CAPS (configure stream again).
In above scenario, we can reuse old stream without any stream reconfigure.
https://bugzilla.gnome.org/show_bug.cgi?id=797239
qtdemux_update_streams() is only ever called after checking
`qtdemux->streams_aware` is TRUE. There is no need to check for that
condition again.
`qtdemux->streams_aware` is only modified when the demuxer is
hard-resetted, which is mutually exclusive with demuxing, so it cannot
be modified during the call.
https://bugzilla.gnome.org/show_bug.cgi?id=797191
This patch clears the sample table whenever the demuxing of a new
fragment begins. This avoids increasing memory usage for long videos.
This behavior was already present when upstream_format_is_time; this
patch extends it to all push mode operation (e.g. Media Source
Extensions).
https://bugzilla.gnome.org/show_bug.cgi?id=796899
* When receiving a segment in TIME, use that seqnum
* Only reset the stored sequence number when doing HARD reset
(and not when we get a FLUSH event from upstream)
This patch aims at fixing the recent regressions in the adaptive test
suite.
All segment pushing in push mode is now done with
gst_qtdemux_check_send_pending_segment(), which is idempotent and
handles both edit lists cases and cases where the upstream TIME segments
have to be sent directly.
Fragmented files that start with a non-zero tfdt are also taken into
account, but their handling has been vastly simplified: now they are
handled as implicit default seeks so there is no need to extend the
GstSegment formulas as was being done before.
qtdemux->segment.duration is no longer modified when
upstream_format_is_time, respecting in this way the durations provided
by dashdemux and fixing bugs in reverse playback tests where mangled
durations appeared in the emitted segments.
https://bugzilla.gnome.org/show_bug.cgi?id=752603
Upstream driving elements such as dashdemux often do reverse playback by
feeding qtdemux with the fragments containing the requested playback
range in reverse order.
But the requested playback range stop may be somewhere in the
middle of a fragment. In that case, a naive pts >= segment.stop
condition may declare end of segment prematurely when demuxing this
first fragment.
This used not to happen because there were places in moov parsing where
segment.stop was overwritten to GST_CLOCK_TIME_NONE even if
upstream_format_is_time -- resulting in this case in a segment with rate
< 0 and stop == -1 and hence not triggering the EOS check, but that was
likely an accident.
This patch modifies the EOS check to take this case into account, not
sending EOS when upstream_format_is_time if rate < 0.
This fixes adaptive.dash.playback.seek_end_live.DASHIF_livestream_testpic_2s
https://bugzilla.gnome.org/show_bug.cgi?id=752603
Sample table based segment event (genereted by qtdemux) could break
presentation timeline. For example, qtdemux should not modify upstream
time format segment (e.g., adaptivedemux use case)
https://bugzilla.gnome.org/show_bug.cgi?id=796480
This field is actually only informatory and the user can potentially
choose something else. EME tests in WebKit testsuite actually doesn't
take it into and force another encryption system to be used, and expects
to be given the occasion to do so.
This basically also reverts 3e063703b3.
Instead of always keeping a safe segment (start=0) event from the beginning,
delay the creation of this event to when we really know the timestamp of the
first sample. This is important to properly start fragmented streams that
we might join in the middle or to play isolated fragment files that might
have an advanced tfdt.
https://bugzilla.gnome.org/show_bug.cgi?id=752603
Fragmented files often use elst.duration=0 which before
ee78825eae was wrongly interpreted as
having no frames.
Since that issue has now been fixed, there is no reason to disable edit
lists in fragmented files. This commit enables them, therefore producing
correct stream time for files containing edit lists.
https://bugzilla.gnome.org/show_bug.cgi?id=793058
Since ca068865c3 the duration of the first
frame is not used for estimating the frame rate.
For this purpose, stream->first_duration was initialized with the
duration of the first frame. In fragmented files, this was previously
done by peeking the first moof, but that can only be done in pull mode.
Fortunately, we don't really need to do that, at least with the current
design: When we are estimating the frame rate we already have the
sample table, regardless of the scheduling mode and whether the file is
fragmented or not, so we can obtain first_duration there much more
reliably.
This fixes frame rate estimation for fragmented files in push mode.
https://bugzilla.gnome.org/show_bug.cgi?id=796384
Whenever got new moov or new stream-start,
demux will try to expose new pad by following rule.
Comparing stream-id in the current moov with previous one, then
* If matched stream-id is found from previous one,
reuse existing pad (most common case)
* Otherwise, expose new pad with new stream-start
* No more used stream will be freed
https://bugzilla.gnome.org/show_bug.cgi?id=684790
Whenever demux got moov, demux will create new stream. Only exception is
duplicated track-id in a moov box. In that case the first stream
will be accepted. This patch is pre-work for rework of moov handling.
https://bugzilla.gnome.org/show_bug.cgi?id=684790
Corrupted files could potentially have multiple cdat/cdt2 atoms in
a sample entry, which is unclear how to handle.
Ignore repeated ones.
CID #1434162
CID #1434159
The value stored in cenc_aux_sample_count wasn't in sync with the
parsing code that followed which checks whether all entries are
valid and present.
Only write the actual sample count when we know for sure.
CID #1427087
The samples table is sorted by DTS, not PTS. As such we can only get the
correct result when using a binary search on it, if we search for the
DTS.
Also if we only ever search for the frame, where the following frame is
the first one with a PTS after the search position, we will generally
stop searching too early if frames are reordered.
In forwards playback this is not really a problem (after the decoder
reordered the frames, clipping is happening), in reverse playback
it means that we can output one or more frames too few as we stop too
early and the decoder would never receive it.
https://bugzilla.gnome.org/show_bug.cgi?id=782118
If we saw empty segments, we previously unconditionally pushed a
GAP event downstream regardless of the duration of that empty
segment.
In order to avoid issues with initial negotiation of downstream elements
(which would negotiate to something before receiving any data due to
that initial GAP event), check if there's at least a second of difference
(like we do for other GAP-related checks in qtdemux) before
deciding to push a GAP event downstream.
qtdemux.c: In function ‘gst_qtdemux_configure_stream’:
qtdemux.c:7764:34: error: suggest parentheses around ‘&&’ within ‘||’ [-Werror=parentheses]
if ((stream->n_samples == 1) && (stream->first_duration == 0)
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid computing frame rate when a stream contain moof with only one
sample, to avoid an assert. The moof is considered as still picture.
The same is already done for one sample given in the moov.
https://bugzilla.gnome.org/show_bug.cgi?id=782217
... which no longer worked due to unconditionally clearing sample info and
ending up in inconsistent state. Let's tread a bit more carefully and also
allow for the old seek handling that resorts to scanning if no mfra info
is available.
In push mode we process as much as possible in the adapter. When we receive
a DISCONT buffer which we can't match to an actual sample (based on the existing
sample table) and there is still data remaining in the incoming adapter,there is
one of two cases happening:
1) We are doing reverse playback, in which case we should flush out all pending
data
2) We have leftover data from the previous incoming buffer... which we can't do
anything about.
For the second case, make sure we flush out the remaining data so that we can start
parsing again from scratch.
https://bugzilla.gnome.org/show_bug.cgi?id=781319
Make sure offset and neededbytes are properly resetted when all
streams are EOS in push-mode.
Avoids cases when some data might still be pushed by upstream (because
it didn't yet see the resulting GST_FLOW_EOS yet) and qtdemux gets
completely lost.
https://bugzilla.gnome.org/show_bug.cgi?id=781266
Before pushing a sample, check if there was a change in the current
stsd entry. This patch also assumes that the first stsd entry is
used as default for the first sample. It might cause an uneeded
caps renegotiation when this isn't the case.
stsd can have multiple format entries, parse them all.
This is required to play DVB DASH profile that uses multiple entries
to identify the different available bitrates/options on dash streams
The stream format-specific data is not stored into QtDemuxStreamStsdEntry
Instead of using the stsd as a base pointer, use the actual stsd
entry as the stsd can have multiple entries. This is rarely used
for file playback but is a possible profile with in DVB DASH specs.
This still doesn't support stsd with multiple entries but makes it
easier to do so.
This is an update of d78d589627
We still exit as early as possible in case of non-ok/non-unlinked combined
flow, but we first make sure that we update the internal position variables.
This ensures that if upstreams "ignores" the flow return (and carries on pushing),
we don't end up processing data with completely bogus variables/positions.
TFDTs with time 0 are being ignored since commit 1fc3d42f. They're
mistaken with the case of not having TFDT, but those two cases
must be distinguished in some way.
This patch passes an extra boolean flag when the TFDT is present.
This is now the condition being evaluated, instead of checking for
0 time.
https://bugzilla.gnome.org/show_bug.cgi?id=780410
Similar to what was done in adaptivedemux, ignore seek
events we've already handled - such as when they are received
on every srcpad of files with lots of streams.
Otherwise mdatleft will have a value calculated from the initial
mdatsize minus the parts of the stream that we saw, which is not
including all the parts of the stream that might've been skipped.
