Sub-class may want to decide to go passthrough/in-place by inspecting
the support meta APIs. This patch duplicates the check for this mode,
so we still don't do uneeded allocation query while we allow sub-classes
to switch the behaviour during it's own decide_allocation call.
Notice that such sub-class need to reset the class to non-passthrough in
set_caps() in order for decide_allocation to be called again. This is
needed otherwise we'd be doing an allocation query in element in which
it make no sense (notably capsfilter).
https://bugzilla.gnome.org/show_bug.cgi?id=791453
Add a gst_base_src_submit_buffer_list() function that allows subclasses
to produce a bufferlist containing multiple buffers in the ::create()
function. The buffers in the buffer list will then also be pushed out
in one go as a GstBufferList. This can reduce push overhead
significantly for sources with packetised inputs (such as udpsrc)
in high-throughput scenarios.
The _submit_buffer_list() approach was chosen because it is fairly
straight-forward, backwards-compatible, bindings-friendly (as opposed
to e.g. making the create function return a mini object instead),
and it allows the subclass maximum control: the subclass can decide
dynamically at runtime whether to return a list or a single buffer
(which would be messier if we added a create_list virtual method).
https://bugzilla.gnome.org/show_bug.cgi?id=750241
Convenience function to just grab all pending data
from the harness, e.g. if we just want to check if
it matches what we expect and we don't care about
the chunking or buffer metadata.
Based on patch by: Havard Graff <havard.graff@gmail.com>
If we're adding to the tail of the queue, it's because we're converting
a gap event, so don't block there it means we're calling from the output
thread.
https://bugzilla.gnome.org/show_bug.cgi?id=784911
Add a comment for when the state matters. Use a local var for priv in
update_time_level() to improve readability. Move the our_latency local
var below the query results checks.
We want to skip serialization for FLUSH_STOP events (apparently). We can
simplify the code to add it to the top-level conditions. There was nothing
done in the first code path if the event was FLUSH_STOP.
Just queue it like any other serialized event. This way we don't need to
check if there still are buffers in the queue.
Validated with the tests and gst-launch-1.0 pipelines.
Don't copy the whole event struct. Set the input params when we call the
forwarding helper. Initialize the internal fields and return values in the
helper.
Otherwise check_events() will not remove the GAP event (as the queue
tail is not the event anymore but the GAP buffer), then the GAP buffer
is handled, then the GAP event is handled again, ... forever.
This ensures that they really get processed in order with
buffers. Just waiting for the queue to be empty is sometimes not
enough as the buffers are dropped from the pad before the result is
pushed to the next element, sometimes resulting in surprising
re-ordering.
In the case an aggregator is created and pads are requested but only
linked later, we end up never updating the upstream latency.
This was because latency queries on pads that are not linked succeed,
so we never did a new query once a live source has been linked, so the
thread was never started.
https://bugzilla.gnome.org/show_bug.cgi?id=757548
The function needs to be unlocked if any data is received, but only
end the first buffer processing on an actual buffer, synchronized events
don't matter on the first buffer processing.
https://bugzilla.gnome.org/show_bug.cgi?id=781673
Allowing us to tell GstPad why we are failing an event, which might
be because we are 'flushing' even if the sinkpad is not in flush state
at that point.
Until now we would start the task when the pad is activated. Part of the
activiation concist of testing if the pipeline is live or not.
Unfortunatly, this is often too soon, as it's likely that the pad get
activated before it is fully linked in dynamic pipeline.
Instead, start the task when the first serialized event arrive. This is
a safe moment as we know that the upstream chain is complete and just
like the pad activation, the pads are locked, hence cannot change.
https://bugzilla.gnome.org/show_bug.cgi?id=757548
This fixes a race where we check if there is a clock, then it get
removed and we endup calling gst_clock_new_single_shot_id() with a NULL
pointer instead of a valid clock and also calling gst_object_unref()
with a NULL pointer later.
https://bugzilla.gnome.org/show_bug.cgi?id=757548
Previously, while allocating the pad number for a new pad, aggregator was
maintaining an interesting relationship between the pad count and the pad
number.
If you requested a sink pad called "sink_6", padcount (which is badly named and
actually means number-of-pads-minus-one) would be set to 6. Which means that if
you then requested a sink pad called "sink_0", it would be assigned the name
"sink_6" again, which fails the non-uniqueness test inside gstelement.c.
This can be fixed by instead setting padcount to be 7 in that case, but this
breaks manual management of pad names by the application since it then becomes
impossible to request a pad called "sink_2". Instead, we fix this by always
directly using the requested name as the sink pad name. Uniqueness of the pad
name is tested separately inside gstreamer core. If no name is requested, we use
the next available pad number.
Note that this is important since the sinkpad numbering in aggregator is not
meaningless. Videoaggregator uses it to decide the Z-order of video frames.
This code will never be called as max>=min in all cases. If the upstream
latency query returned min>max, the function already returned and all
values that are added to those have max>= min.
Not all aggregator subclasses will have a single pad template called sink_%u
and might do something special depending on what the application requests.
https://bugzilla.gnome.org/show_bug.cgi?id=757018
Otherwise they will receive a QOS event that has earliest_time=0 (because we
can't have negative timestamps), and consider their buffer as too late
https://bugzilla.gnome.org/show_bug.cgi?id=754356
In the case where you have a source giving the GstAggregator smaller
buffers than it uses, when it reaches a timeout, it will consume the
first buffer, then try to read another buffer for the pad. If the
previous element is not fast enough, it may get the next buffer even
though it may be queued just before. To prevent that race, the easiest
solution is to move the queue inside the GstAggregatorPad itself. It
also means that there is no need for strange code cause by increasing
the min latency without increasing the max latency proportionally.
This also means queuing the synchronized events and possibly acting
on them on the src task.
https://bugzilla.gnome.org/show_bug.cgi?id=745768
Before aggregator based elements always started at running time 0,
now it's possible to select the first input buffer running time or
explicitly set a start-time value.
https://bugzilla.gnome.org/show_bug.cgi?id=749966
Adding a pad will add a new upstream that might have a bigger minimum latency,
so we might have to wait longer. Or it might be the first live upstream, in
which case we will have to start deadline based aggregation.
Removing a pad will remove a new upstream that might have had the biggest
latency, so we can now stop waiting a bit earlier. Or it might be the last
live upstream, in which case we can stop deadline based aggregation.
And keep on querying upstream until we get a reply.
Also, the _get_latency_unlocked() method required being calld
with a private lock, so removed the _unlocked() variant from the API.
And it now returns GST_CLOCK_TIME_NONE when the element is not live as
we think that 0 upstream latency is possible.
https://bugzilla.gnome.org/show_bug.cgi?id=745768
One has to use the src_lock anyway to protect the min/max/live so they
can be notified atomically to the src thread to wake it up on changes,
such as property changes. So no point in having a second lock.
Also, the object lock was being held across a call to
GST_ELEMENT_WARNING, guaranteeing a deadlock.
While gst_aggregator_iterate_sinkpads() makes sure that every pad is only
visited once, even when the iterator has to resync, this is not all we have
to do for querying the latency. When the iterator resyncs we actually have
to query all pads for the latency again and forget our previous results. It
might have happened that a pad was removed, which influenced the result of
the latency query.
It was between another function and its helper function before, which was
confusing when reading the code as it had nothing to do with the other
functions.
This lock is not what is commonly known as a "stream lock" in GStremer,
it's not recursive and it's taken from the non-serialized FLUSH_START event.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
steal_buffer() + unref seems to be a wide-spread idiom
(which perhaps indicates that something is not quite
right with the way aggregator pad works currently).
Instead of using the GST_OBJECT_LOCK we should have
a dedicated mutex for the pad as it is also associated
with the mutex on the EVENT_MUTEX on which we wait
in the _chain function of the pad.
The GstAggregatorPad.segment is still protected with the
GST_OBJECT_LOCK.
Remove the gst_aggregator_pad_peak_unlocked method as it does not make
sense anymore with a private lock.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Some members sometimes used atomic access, sometimes where not locked at
all. Instead consistently use a mutex to protect them, also document
that.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Reduce the number of locks simplify code, what is protects
is exposed, but the lock was not.
Also means adding an _unlocked version of gst_aggregator_pad_steal_buffer().
https://bugzilla.gnome.org/show_bug.cgi?id=742684
Whenever a GCond is used, the safest paradigm is to protect
the variable which change is signalled by the GCond with the same
mutex that the GCond depends on.
https://bugzilla.gnome.org/show_bug.cgi?id=742684
