Original commit message from CVS:
* gst/autoplug/gstspider.c (gst_spider_request_new_pad): Fix typo
in debug message.
(gst_spider_create_and_plug): Improve debug message.
General: Replace while loops which iterates over GLists with for
loops. Which are much cleaner, improves readability, especially
for gst_spider_identity_plug
Original commit message from CVS:
* gst/gstelement.c: (gst_element_dispose):
simplify
* gst/gstpad.c: (gst_pad_call_chain_function):
don't create loads of events due to bad macro usage
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_is_fixed_foreach):
* gst/gstpad.c: (_gst_pad_default_fixate_foreach):
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer), (gst_type_is_fixed),
(_gst_value_initialize): Create a new function gst_type_is_fixed()
to indicate types that are fixed wrt caps or not. Switching to
this function fixes (bug #140298).
* gst/gstvalue.h:
Original commit message from CVS:
* gst/elements/gstfilesrc.c: (gst_filesrc_init), (gst_filesrc_get),
(gst_filesrc_change_state), (gst_filesrc_srcpad_event):
* gst/elements/gstfilesrc.h:
s/seek_happened/need_discont/ and require discont before sending any
data
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer), (_gst_value_initialize):
Register these types as fundamental types. (bug #140015)
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_new),
(gst_pad_link_free), (gst_pad_link_try), (_invent_event),
(gst_pad_pull):
implement enforcing discont events before buffers are passed. This
allows state changes of only some elements and later correctly going
on where they left off (or in short: you can now set audio sinks to
NULL to release the device when the pipeline is paused)
* gst/gstpad.c: (gst_pad_call_chain_function),
(gst_pad_call_get_function):
* gst/gstpad.h:
add gst_pad_call_chain_function and gst_pad_call_get_function for
scheduler interaction. They are required because of the changes
above.
* gst/schedulers/entryscheduler.c: (get_buffer),
(gst_entry_scheduler_chain_wrapper),
(gst_entry_scheduler_get_wrapper),
(gst_entry_scheduler_state_transition),
(gst_entry_scheduler_pad_link):
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_chain_wrapper),
(gst_basic_scheduler_src_wrapper),
(gst_basic_scheduler_chainhandler_proxy),
(gst_basic_scheduler_gethandler_proxy),
(gst_basic_scheduler_cothreaded_chain),
(gst_basic_scheduler_chain_elements):
* gst/schedulers/gstoptimalscheduler.c:
(get_group_schedule_function), (pad_clear_queued),
(gst_opt_scheduler_pad_link):
use the new functions instead of calling get/chain-functions
directly.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt: Remove deprecated symbols.
* docs/gst/tmpl/gstinfo.sgml: same
* docs/gst/tmpl/gstutils.sgml: Remove a bunch of bogus crap that
gtk-doc put here.
* gst/gstutils.h: Remove the \ that was confusing gtk-doc.
* examples/queue/queue.c: (main): We iterate pipelines, not
bins. (bug #139996)
Original commit message from CVS:
* gst/gstplugin.c: (_gst_plugin_fault_handler_restore),
(_gst_plugin_fault_handler_setup): Disable more stuff on
Windows.
Original commit message from CVS:
* gst/gstinfo.c: (_gst_debug_init): Change some internal
symbol names to not conflict with new gstinfo.h symbols.
* gst/gstinfo.h: Add inline functions for all those crazy
compilers that don't know how to handle variadic macros (MSVC).
Original commit message from CVS:
* configure.ac: Changes to remove POSIXisms (mmap in this case)
and to build DLLs on Windows.
* gst/Makefile.am:
* gst/elements/gstfilesrc.c: (gst_filesrc_get),
(gst_filesrc_open_file):
* gst/schedulers/Makefile.am:
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_structure_fixate_field_nearest_int),
(gst_caps_structure_fixate_field_nearest_double): Fix bug in
fixating lists.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_initialize), (gst_buffer_get_type),
(gst_buffer_free_chunk): Added gst_buffer_get_type() and changed
to using it.
* gst/gstbuffer.h: Changed GST_BUFFER_TYPE to gst_buffer_get_type()
* gst/gstcaps.c: (gst_caps_is_fixed_foreach): Buffer is a fixed type
* gst/gstpad.c: (_gst_pad_default_fixate_foreach): same
* gst/gststructure.c: (gst_structure_set_valist),
(gst_structure_from_abbr), (gst_structure_to_abbr): Add vararg
support for buffers.
* gst/gsttag.c: (gst_tag_register): Constify a prototype that was
intended to be const.
* gst/gsttag.h: same
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer), (_gst_value_initialize): Add code
to (de)serialize buffers.
* testsuite/caps/Makefile.am: Add a bit of buffer testing
* testsuite/caps/string-conversions.c: (main):
* testsuite/caps/value_serialize.c: add new test
Original commit message from CVS:
* gst/schedulers/gstbasicscheduler.c: (plugin_init):
rename categories to basic_*
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_chain_wrapper),
(gst_basic_scheduler_chainhandler_proxy),
(gst_basic_scheduler_gethandler_proxy),
(gst_basic_scheduler_eventhandler_proxy):
debugging category fixes - put common stuff in log category
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_chain_elements):
dirty fix: call gst_basic_scheduler_cothreaded_chain when already
active and linking two active chains
Original commit message from CVS:
* gst/schedulers/gstbasicscheduler.c:
make sure we can switch back to the main function if we're still in
the main function (supposed to fix#139617)
* gst/schedulers/gthread-cothreads.h:
don't throw an error when switching to the same cothread
Original commit message from CVS:
* gst/elements/gstbufferstore.c: (gst_buffer_store_get_buffer):
when the buffer is complete, don't check if other buffers are needed
* gst/elements/gstfilesrc.c: (gst_filesrc_srcpad_event):
check that the offset is >0 so we don't try to read before the
beginning of the file
* gst/gstpad.c: (gst_pad_set_pad_template):
sink the template, so we don't end up with 130k pad templates
Original commit message from CVS:
* gst/autoplug/gstspider.c: (gst_spider_link_add):
don't ref the element, adding already reffed it. And we didn't unref
it later anyway... (huge memleak when you used many spider elements)
* gst/gstelement.c: (gst_element_base_class_finalize):
* gst/gstelementfactory.c: (gst_element_factory_cleanup),
(gst_element_register):
* gst/gsturi.c: (gst_element_make_from_uri):
use gst_object_(un)ref instead of g_object(un)ref
Original commit message from CVS:
* gst/gstbuffer.h:
remove macro that wouldn't work anymore because struct member has
been removed.
* gst/schedulers/entryscheduler.c: (schedule_forward):
fix segfault for unconnected pads
Original commit message from CVS:
reviewed by David Schleef <ds@schleef.org>
* gst/gstinfo.h:
*_FORMAT modifiers should require putting a % in front of them for
consistency reasons.
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/gst_private.h:
* gst/gstinfo.c: (__gst_in_valgrind), (_gst_debug_init):
add support for detecting if GStreamer runs inside valgrind.
requires valgrind (d'oh) and --enable-debug for correct cdetection.
print a big message in valgrind that GStreamer has detected it's
running inside and might now use different code.
* gst/gstmemchunk.c: (populate), (free_area),
(gst_mem_chunk_destroy), (gst_mem_chunk_alloc),
(gst_mem_chunk_free):
flag memchunks for valgrind, so it can detect leaking of chunks.
This allows detecting leaks of GstBuffer and GstEvent correctly
inside valgrind.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_sub_free),
(gst_buffer_default_free), (gst_buffer_default_copy),
(gst_buffer_alloc_chunk), (gst_buffer_free_chunk),
(gst_buffer_new), (gst_buffer_create_sub): Allocate GstBuffer
structures in one place.
Original commit message from CVS:
* gst/schedulers/entryscheduler.c: (some functions, dunno which,
prepareChangeLog doesn't work when cvs indents):
don't throw an error when no element can be scheduled, there's too
many weird reasons why it doesn't work. Return STOPPED instead.
decoupled elemts' schedulability doesn't depend on bufpens.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_collect_array), (gst_pad_collectv),
(gst_pad_collect), (gst_pad_collect_valist), (gst_pad_selectv),
(gst_pad_select):
* gst/gstpad.h:
* gst/gstscheduler.c: (gst_scheduler_pad_select),
(gst_scheduler_lock_element), (gst_scheduler_unlock_element):
* gst/gstscheduler.h:
implement gst_pad_collect as replacement for gst_pad_select.
deprecate gst_pad_select and gst_scheduler_(un)lock_element
add new flag GST_SCHEDULER_FLAG_NEW_API for API that implements the
new pad_select, lock and unlock calls.
* gst/cothreads.c: (cothread_destroy), (cothread_switch):
* gst/cothreads.h:
* gst/schedulers/cothreads_compat.h:
* gst/schedulers/gthread-cothreads.h:
remove unused cothread_lock and cothread_unlock calls
* gst/schedulers/entryscheduler.c:
(gst_entry_scheduler_class_init), (gst_entry_scheduler_init),
(_can_schedule_loop), (gst_entry_scheduler_get_handler),
(gst_entry_scheduler_pad_select):
update to new API
* gst/schedulers/gstbasicscheduler.c:
(gst_basic_scheduler_class_init), (gst_basic_scheduler_init),
(gst_basic_scheduler_pad_select):
remove useless lock and unlock calls, update pad_select to new API
(untested)
* gst/schedulers/gstoptimalscheduler.c:
(gst_opt_scheduler_class_init):
remove useless select, lock and unlock function calls
* gst/elements/gstaggregator.c: (gst_aggregator_loop):
use gst_pad_collect instead of gst_pad_select
Original commit message from CVS:
* gst/schedulers/entryscheduler.c: (_can_schedule_get),
(can_schedule_pad), (can_schedule), (schedule), (schedule_forward),
(schedule_next_element), (print_entry):
add can_schedule_pad to handle element states.
add schedule_forward to select the correct entry to schedule next
Original commit message from CVS:
* gst/schedulers/entryscheduler.c:
completely revamp the inner workings, so it's a lot easier to
understand and extend
Original commit message from CVS:
2004-04-03 Andy Wingo <wingo@pobox.com>
* gst/schedulers/gstoptimalscheduler.c (GstOptSchedulerGroupLink):
Rename ->group1 and ->group2 to ->src and ->sink, respectively.
This allows better introspection of pipeline topology.
(add_to_chain): Don't do trickery to put loop elements first;
rather, queue a chain sort by marking the chain as dirty.
(remove_from_chain): Mark the chain dirty.
(sort_chain): New function. Sorts the group list so that terminal
sinks are first. This means elements on the sink side will be
preferentially sscheduled before elements on the src side of the
pipeline.
(chain_recursively_migrate_group): Use OTHER_GROUP_LINK.
(schedule_chain): If the chain is marked DIRTY, call sort_chain.
(gst_opt_scheduler_pad_link, gst_opt_scheduler_pad_unlink)
(group_inc_link): Change argument and variable names to match the
new link structure member names (src and sink).
(group_dec_link): Add some description
Original commit message from CVS:
reviewed by Benjamin Otte <otte@gnome.org>
* gst/gststructure.c: (gst_structure_free):
memleak fix: free fields array (partial fix for #134839)
Original commit message from CVS:
* docs/random/ds/0.9-suggested-changes:
Add a note to change handoff use in fakesrc to be usable in
a more generic way (fakesrc should be renamed to appsrc or so).
* gst/elements/gstfakesrc.c: (gst_fakesrc_class_init):
Change signal type to scope, so we can fill the buffer in the
handoff handler (that's the whole use of this signal...).
Original commit message from CVS:
* gst/registries/gstxmlregistry.c
(gst_xml_registry_rebuild_recurse): Fix the algorithm to
determine if a file is a G_MODULE. The old one discards paths
containing "so" somewhere in the middle. My home directory is
called "soto". Go figure...
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_join): Add function gst_buffer_join()
to eventually deprecate gst_buffer_merge(). (bug: #136408)
* gst/gstbuffer.h:
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_union_int_int_range),
(gst_value_union_int_range_int_range), (gst_value_can_union),
(gst_value_union), (_gst_value_initialize): Add some union
implementations. We didn't have any previously.
* testsuite/caps/Makefile.am:
* testsuite/caps/audioscale.c: (gst_audioscale_expand_value),
(gst_audioscale_getcaps), (test_caps), (main): A little test
that is the same as the caps manipulation in audioscale.
