Marking them as children properties and properly allow serializing
clips children properties.
This doesn't handle several TrackElement of a same type with
different property values but this require more worked already
marked as fixme to allow specifying full path of elements in the
children properties API.
See https://gitlab.gnome.org/GNOME/pitivi/issues/1687
The code was not taking into account the fact that testsuite could be
located in a different folder that the default one.
Now the testsuite is responsible for providing a path if it wants
to set extra scenarios or the user can set one by hand.
Implementing it in the overrides as PyGObject won't be able to properly
convert python values to GValues in some cases. Using
g_object_set_property works as some logic is implemented inside
PyGObject for that particular case. This is a "regression" due
to https://bugzilla.gnome.org/review?bug=769789&attachment=348766 were
we end up with an OverflowError while setting G_TYPE_UINT children
properties.
In the (now tested) scenario where we have a transition on the right
side of a clip we are splitting, auto transitions can't be created
because we resize the clip after adding the new one, meaning that
there are 3 elements in the "transition zone", we need to force
auto transition creation after the splitting.
Fixes https://gitlab.gnome.org/GNOME/pitivi/issues/2142
GstDiscoverer objects were leaked by tests making the leaks detector
unusable.
Introduce ges_deinit(), similiar to gst_deinit(), doing some cleanup
before exiting the process.
https://bugzilla.gnome.org/show_bug.cgi?id=776805
In some cases when rippling clip we could get the algo lost because
a transition existed between two clips (for example at the end of c1
and at the begining of c2) but while rippling it would have required
a transition at the end of c2 and beginning of c1, and we were properly
not destroying the old one (as the two clips were in the moving context)
but we were still creating the other transition in the end...
Reviewed-by: Alex Băluț <alexandru.balut@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1362
Computation was not taking into account the fact that the start of
the element being moved could be at the middle of a group and not
necessarily at the start!
Fixes T7544
Reviewed-by: Alex Băluț <alexandru.balut@gmail.com>
Differential Revision: https://phabricator.freedesktop.org/D1282
We were only concidering that we should let the group handle moving
transitions when changing transitions but in fact as soon as a
transition is happenning between two clips that are in a same group
the group properly handles moving the transition, so let the
group do its job.
Fixes T7543
Differential Revision: https://phabricator.freedesktop.org/D1281
GESLayer is now responsible for setting clips priorites. Also
GESClip top effects priorities are now set by the
ges_clip_set_top_effect_index method, the user should never call
ges_timeline_element_set_priority as it will anyway be overriden
by GES itself.
Differential Revision: https://phabricator.freedesktop.org/D1280
Fix all tests as we now have 1 priority inside the layer
dedicated to transitions (basically no source clip will
ever have a priority of 0 inside a layer).
Differential Revision: https://phabricator.freedesktop.org/D1276
And simplify the way we start computing children priority
making min_priority already relative to the clip itself.
Differential Revision: https://phabricator.freedesktop.org/D1275
Had to separate timeline_emit_group_added from timeline_add_group
to avoid emitting group-added when the project is being loaded.
Reviewed-by: Thibault Saunier <thibault.saunier@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D1302
And reuse the same previously created element when adding the clip
back to a layer, avoiding losing all setting done on clip children
in that situation
This is a behaviour change but previous behaviour was actually totally
unexpected and people working around that weird behaviour will moste
probably not care about that change
Differential Revision: https://phabricator.freedesktop.org/D1094
Before this patch, NLE and GES did not support NleOperations (respectively
GESEffects) that changed the speed/tempo/rate at which the source plays. For
example, the 'pitch' element can make audio play faster or slower. In GES 1.5.90
and before, an NleOperation containing the pitch element to change the rate (or
tempo) would cause a pipeline state change to PAUSED after that stack; that has
been fixed in 1.5.91 (see #755012 [0]). But even then, in 1.5.91 and later,
NleComposition would send segment events to its NleSources assuming that one
source second is equal to one pipeline second. The resulting early EOS event
(in the case of a source rate higher than 1.0) would cause it to switch stacks
too early, causing confusion in the timeline and spectacularly messed up
output.
This patch fixes that by searching for rate-changing elements in
GESTrackElements such as GESEffects. If such rate-changing elements are found,
their final effect on the playing rate is stored in the corresponding NleObject
as the 'media duration factor', named like this because the 'media duration',
or source duration, of an NleObject can be computed by multiplying the duration
with the media duration factor of that object and its parents (this is called
the 'recursive media duration factor'). For example, a 4-second NleSource with
an NleOperation with a media duration factor of 2.0 will have an 8-second media
duration, which means that for playing 4 seconds in the pipeline, the seek
event sent to it must span 8 seconds of media. (So, the 'duration' of an
NleObject or GES object always refers to its duration in the timeline, not the
media duration.)
To summarize:
* Rate-changing elements are registered in the GESEffectClass (pitch::tempo and
pitch::rate are registered by default);
* GESTimelineElement is responsible for detecting rate-changing elements and
computing the media_duration_factor;
* GESTrackElement is responsible for storing the media_duration_factor in
NleObject;
* NleComposition is responsible for the recursive_media_duration_factor;
* The latter property finally fixes media time computations in NleObject.
NLE and GES tests are included.
[0] https://bugzilla.gnome.org/show_bug.cgi?id=755012
Differential Revision: https://phabricator.freedesktop.org/D276
Making it possible to create the nleobject right at the creation
of the element.
Reviewed-by: Thibault Saunier <thibault.saunier@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D738
In get_property we should return the default values if
we have not created any GESTitleSource yet
(instead of segfaulting).
And fix GESTitleSource default values!
Reviewed-by: Thibault Saunier <thibault.saunier@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D737
Allowing pasting groups paste exactly what had been copied
And not the new version of the contained objects
This technically breaks the C API but this is a new API and I believe
and hope nobody is using it right now.
Reviewed-by: Thibault Saunier <thibault.saunier@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D616
Integrating python tests in the build system
And cleanup configure.ac
Reviewed-by: Thibault Saunier <thibault.saunier@collabora.com>
Differential Revision: https://phabricator.freedesktop.org/D601
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753864
We should never let 3 objects to overlap at a same position, for that
we introduce a "rollback" feature and whenever such an editing happens,
we rollback object position to whatever it was before the move.
Summary:
Handle the fact that some new features can be added and that means
generated files will not be fully understandable by older versions of
the formatter.
Make sure that we set the format version to 0.2 when we serialize the
GstEncodingProfile.enabled property.
Add some tests around that.
+ Fix a minor bug in the test-utils
+ Add a meta on the projects to tell in what format version a project
has been serialized/parsed back
API:
GES_META_FORMAT_VERSION
Depends on D178
Reviewers: Mathieu_Du
Differential Revision: http://phabricator.freedesktop.org/D184
Summary: It must only be done when the object is commited.
We can do that in constructed though, as the changes will
anyway be commited when the object is added to a composition.
Also update the tests, as we set properties spearately then
check the stop, we can commit the source at its creation without
removing meaning from the tests.
Reviewers: thiblahute
Differential Revision: http://phabricator.freedesktop.org/D84
