Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_probe_devices),
(gst_cdio_cdda_src_read_sector), (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Small code cleanups.
Don't use pad_alloc as the base class cannot deal with the error codes.
Original commit message from CVS:
* ext/hal/gsthalaudiosink.c: (do_toggle_element):
* ext/hal/gsthalaudiosrc.c: (do_toggle_element):
Having NULL as UDI previously selected the default sink/src. Change
this back but mention it in the debug output.
* ext/hal/hal.c: (gst_hal_get_alsa_element),
(gst_hal_get_oss_element), (gst_hal_get_string),
(gst_hal_render_bin_from_udi), (gst_hal_get_audio_sink),
(gst_hal_get_audio_src):
* ext/hal/hal.h:
Refactor a bit, check all error conditions, greatly improve debugging
and fix some possible memory leaks. Also implement OSS support
and allow specifying an UDI that points to a real device. For this the
child device which supports ALSA (preferred) or OSS is used.
As a side effect this makes it impossible now to get a alsasink in
halaudiosrc and a alsasrc in halaudiosink.
Original commit message from CVS:
* ext/hal/gsthalaudiosink.c: (do_toggle_element):
* ext/hal/gsthalaudiosrc.c: (do_toggle_element):
Check if the device UDI is set before trying to query HAL
about it and give a useful error message if it wasn't set.
* ext/hal/hal.c: (gst_hal_get_string):
Don't query HAL for NULL UDIs. Passing NULL as UDI to HAL
gives an assertion failure in D-Bus when running with
DBUS_FATAL_WARNINGS=1.
Original commit message from CVS:
* ext/shout2/gstshout2.c: (gst_shout2send_class_init),
(gst_shout2send_init), (gst_shout2send_start),
(gst_shout2send_set_property), (gst_shout2send_get_property):
* ext/shout2/gstshout2.h:
Add a property for username.
Original commit message from CVS:
* ext/gconf/gstgconfaudiosink.c: (gst_gconf_audio_sink_reset),
(do_change_child):
Don't reset the profile when going switching states, as it makes
the element non-reusable.
Original commit message from CVS:
* ext/gconf/Makefile.am:
* ext/gconf/gconf.c: (gst_gconf_get_string),
(gst_gconf_get_key_for_sink_profile), (gst_gconf_set_string),
(gst_gconf_render_bin_with_default):
* ext/gconf/gconf.h:
* ext/gconf/gstgconfaudiosink.c: (gst_gconf_audio_sink_base_init),
(gst_gconf_audio_sink_reset), (gst_gconf_audio_sink_init),
(gst_gconf_audio_sink_dispose), (do_change_child),
(gst_gconf_switch_profile), (gst_gconf_audio_sink_set_property),
(cb_change_child), (gst_gconf_audio_sink_change_state):
* ext/gconf/gstgconfaudiosink.h:
* ext/gconf/gstswitchsink.c: (gst_switch_sink_base_init),
(gst_switch_sink_class_init), (gst_switch_sink_reset),
(gst_switch_sink_init), (gst_switch_sink_dispose),
(gst_switch_commit_new_kid), (gst_switch_sink_set_child),
(gst_switch_sink_set_property), (gst_switch_sink_handle_event),
(gst_switch_sink_get_property), (gst_switch_sink_change_state):
* ext/gconf/gstswitchsink.h:
* gst/autodetect/gstautoaudiosink.c:
(gst_auto_audio_sink_class_init), (gst_auto_audio_sink_dispose),
(gst_auto_audio_sink_clear_kid), (gst_auto_audio_sink_reset),
(gst_auto_audio_sink_detect):
* gst/autodetect/gstautovideosink.c:
(gst_auto_video_sink_class_init), (gst_auto_video_sink_dispose),
(gst_auto_video_sink_clear_kid), (gst_auto_video_sink_reset),
(gst_auto_video_sink_detect):
Re-factor the gconfaudiosink into a "GstSwitchSink" base class
and a child that implements the GConf key monitoring. The end goal of
this is an audio sink that can be changed on the fly, but at the
moment it still only changes on the next READY transition.
Original commit message from CVS:
* ext/hal/hal.c: (gst_hal_get_string):
* ext/hal/hal.h:
Some small cleanups; deal with errors when parsing the HAL ALSA
capabilities a bit better.
Original commit message from CVS:
* ext/gconf/gconf.c: (gst_gconf_get_key_for_sink_profile),
(gst_gconf_render_bin_from_key),
(gst_gconf_get_default_audio_sink):
* ext/gconf/gconf.h:
* ext/gconf/gstgconfaudiosink.c: (get_gconf_key_for_profile),
(do_toggle_element), (gst_gconf_audio_sink_set_property),
(gst_gconf_audio_sink_get_property):
In gconfaudiosink, get the right key as the old key in do_toggle
(ie. one dependent on the profile selected). Log some more stuff so
we can see what's actually going on.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_create_src_pad):
Fix a off by one that leads to the duration reported as one
sample less than it is
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_src_query):
Fix the SEEKING query. We can seek if we are in pull mode, not the
other way around. Also set the correct format in the seeking query and
handle the case where the headers are not read yet and we can't say
anything about our seeking capabilities.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init):
Fix spelling in 2 places: It's called Wavpack, not WavePack.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type):
Minor clean-up: use enum values instead of hardcoded constants (#395536).
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* ext/jpeg/gstjpegdec.c:
* ext/jpeg/gstjpegenc.c:
* ext/jpeg/smokecodec.c:
These libjpeg callbacks should return a 'boolean' (unsigned char
apparently) and not a 'gboolean' (which maps to gint). Fixes
warnings when compiling with MingW (#393427).
* gst/rtsp/rtspconnection.c: (rtsp_connection_read):
Use ioctlsocket on win32.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Some printf format fixes for win32.
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_delay):
Don't return bogus values when esd_get_delay() fails for some
reason (#392189).
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_event):
Reset flow_state back to _OK after a flush stop so that we exit our
error state after the flush. Fixes#374213
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.h:
Use local copy of md5.h, as it disappeared in recent wavpack
installs.
Patch by: Sebastian Dröge <slomo at ubuntu dot com>
Fixes: #387076
Original commit message from CVS:
* ext/gconf/gstgconfaudiosrc.c: (gst_gconf_audio_src_init),
(gst_gconf_audio_src_dispose), (do_toggle_element):
* ext/gconf/gstgconfaudiosrc.h:
Remove gconf notify hook when the gconfaudiosrc element is
destroyed, otherwise the callback may be called on an
already-destroyed instance and bad things happen. Should fix
#378184.
Also ignore gconf key changes when the source is already running.
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Don't attempt to write a NULL frame into the ID3 tag set when the
createFrame method returned NULL.
Fixes: #381857
Patch by: Jonathan Matthew <jonathan at 0kaolin wh9 net >
Original commit message from CVS:
* ext/libcaca/gstcacasink.c: (gst_cacasink_class_init):
Fix width and height properties.
* ext/libcaca/gstcacasink.h:
Fix compilation on newer libcaca that require us to include a new
header. Fixes#379918.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_reset),
(gst_wavpack_dec_init), (gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init),
(gst_wavpack_enc_class_init), (gst_wavpack_enc_reset),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_change_state):
* ext/wavpack/gstwavpackparse.c:
Some small clean-ups: use enums instead of hard-coded numbers,
const-ify element details, re-factor some code into _reset()
functions (#352605).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* configure.ac:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config):
Fix enum nicks; only emit no-more-pads once; add support for very
fast encoding mode in upcoming 4.40.0 release (#369539).
Original commit message from CVS:
* ext/cdio/gstcdio.c: (gst_cdio_get_cdtext):
* ext/cdio/gstcdio.h:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open):
Move CD-TEXT utility function into common file so it can also be
used by a future cdioparanoiasrc.
Original commit message from CVS:
* gst/id3demux/id3v2frames.c: (parse_picture_frame):
We require a -base more recent than 0.10.9, so it's safe to use
GST_TYPE_TAG_IMAGE_TYPE unconditionally now.
* ext/dv/gstdvdec.c: (gst_dvdec_sink_event):
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_sink_event):
Use _newsegment_full() now that we depend on a recent enough core.
* gst/wavparse/gstwavparse.c:
Remove cruft that we don't need any longer now that we depend on
a recent enough -base.
Original commit message from CVS:
* ext/speex/gstspeexdec.c: (speex_dec_convert),
(speex_dec_sink_event), (speex_dec_chain_parse_header):
Some small cleanups, use _scale.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_create_src_pad):
* gst/nuvdemux/gstnuvdemux.c: (gst_nuv_demux_create_pads):
* tests/check/elements/wavpackparse.c: (wavpackparse_found_pad):
Activate pads before adding them to running element.
Original commit message from CVS:
* ext/speex/gstspeexenc.c: (gst_speexenc_finalize),
(gst_speexenc_set_last_msg), (gst_speexenc_setup),
(gst_speexenc_set_header_on_caps):
Fix some mem leaks.
Original commit message from CVS:
* ext/jpeg/gstjpegdec.c:
Set minimum height to 8 (from 16), our code should handle
that fine. Some of the buttons on the apple trailer site
are apparently only 15 pixels high (see #357470).
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* ext/annodex/gstcmmldec.c: (gst_cmml_dec_chain):
Seeking back in a file containing a CMML stream errors out if the seek
goes back up to the CMML headers. This is because after the seek the xml
processing instruction <?xml ...?> is submitted to the xml parser again,
which results in an error. The attached patch fixes the problem.
Fixes#353908.
* ext/annodex/gstcmmlenc.h:
Fix authors name.
Original commit message from CVS:
2006-08-28 Andy Wingo <wingo@pobox.com>
* ext/raw1394/gstdv1394src.c (gst_dv1394src_from_raw1394handle):
New helper function to lessen the ifdefs.
(GST_INFO_OBJECT):
(gst_dv1394src_iso_receive): Use it.
(gst_dv1394src_create): Also use the control sockets in iec61883
mode.
(gst_dv1394src_start, gst_dv1394src_stop): Always use a separate
handle for AVC operations; fixes#348233.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* ext/annodex/gstannodex.c: (gst_annodex_granule_to_time):
Do some extra sanity checks.
Fixes#350340.
* ext/annodex/gstcmmlenc.c: (gst_cmml_enc_change_state),
(gst_cmml_enc_parse_tag_head), (gst_cmml_enc_parse_tag_clip),
(gst_cmml_enc_push_clip), (gst_cmml_enc_push):
Check if clip->start_time is valid before adding the clip to the
track list.
Reset enc->preamble going from PAUSED to READY.
Don't use GST_FLOW_UNEXPECTED for wrong usage of the element, it is
only used for EOS.
Only post an error message if we were the one that created the fatal
GstFlowReturn value.
* ext/annodex/gstcmmlutils.c: (gst_cmml_clock_time_from_npt),
(gst_cmml_clock_time_to_granule), (gst_cmml_track_list_has_clip):
Parse the seconds field of the npt-sec time format using %llu rather than
%d and check that the value scaled by GST_SECOND doesn't overflow.
Use guint64(s) to represent the keyindex and keyoffset fields of a granulepos.
Lookup a clip's track with clip->track rather than clip->id which
makes no sense.
Identify a clip by its track and start time and not its xml id.
do some more input checking and make sure we don't do undefined shifts.
* tests/check/elements/cmmldec.c: (setup_cmmldec),
(teardown_cmmldec), (check_output_buffer_is_equal), (push_data),
(cmml_tag_message_pop), (check_headers), (push_clip_full),
(push_clip), (push_empty_clip), (check_output_clip),
(GST_START_TEST), (cmmldec_suite):
* tests/check/elements/cmmlenc.c: (setup_cmmlenc),
(teardown_cmmlenc), (check_output_buffer_is_equal), (push_data),
(check_headers), (push_clip), (check_clip_times), (check_clip),
(check_empty_clip), (GST_START_TEST), (cmmlenc_suite):
Added some more checks.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_post_tags),
(gst_wavpack_dec_chain):
Post audio codec and average bitrate tags on bus (#344472).
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init),
(gst_wavpack_parse_src_query):
Forward queries in other formats (BYTE format in particular)
upstream; add Sebastian to authors.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_push_block):
Fix mem leak, send newsegment event on correction pad
as well (#352476).
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init):
Restore original author (on Sebastian's request).
* tests/check/Makefile.am:
* tests/check/gst-plugins-bad.supp:
Add (so far empty) suppression file for -bad. Remove
wavpackenc test from VALGRIND_TO_FIX now that the leak
is fixed.
