Commit graph

54 commits

Author SHA1 Message Date
jadarve
728c83f74d mpegtsmux: mux meta/x-id3
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6793>
2024-07-03 08:40:21 +00:00
Edward Hervey
a4a21feb87 tsdemux: Fix maximum PCR/DTS values
* PTS/DTS are stored as 33 bit
* PCR is 33bit multiplied by 300

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/7050>
2024-06-18 15:56:09 +00:00
Edward Hervey
131679b9d0 mpegtsbase: Fix Program equality check
There was an issue with this equality check, which was to figure out what to do
with PCR pids (whether they were part of the streams present or not) and whether
we ignore PCR or not.

Turns out ... we already took care of that further up in the function.

The length check can be simplified by just checking whether the length of
the *original* PMT and the new PMT are identical. Since we don't store "magic"
PCR streams in those, we can just use them as-is.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6713>
2024-04-23 11:15:53 +00:00
Edward Hervey
6d228c420c tsdemux: Disable smart program update
The goal of this code was, for programs which were updates (i.e. adding/removing
streams but not completely changing) to allow dynamic addition/removal of
streams without completely removing everything.

But this wasn't 100% tested and there are a bunch of issues which make it fail
in plenty of ways.

For now disable that feature and force the legacy "add all pads again and then
remove old ones" behaviour to make it switch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6651>
2024-04-22 11:56:30 +00:00
Jan Schmidt
6f652ec8a1 tsdemux: Detect reaching the end of configured segment
If the current segment has a configured stop point, detect
when when pad timestamps proceed past that point and mark
them as EOS. Otherwise, tsdemux continues streaming
the whole input downstream (unless something downstream detects
and returns EOS for us)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6023>
2024-02-07 07:36:02 +00:00
Jan Schmidt
61aefda664 tsdemux: Support segment seeking
Add support for segment seeks and posting segment-done for
seamless non-flushing looping

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6023>
2024-02-07 07:36:02 +00:00
Diego Nieto
e290555367 mpegtsdemux: Fix comment about the jitter description
According to the information provided below, the Jitter (J) is
defined by a network delay (D) + a noise(i)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5494>
2023-10-17 08:22:41 +00:00
Vivia Nikolaidou
0a331402d6 tsdemux: Detect language from ac3 descriptor
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4709>
2023-06-07 13:04:03 +00:00
Ruben Gonzalez
059965fe53 doc: Fix newline char between authors
Found running `gst-inspect-1.0 -a |& grep -v ":" | grep @`

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4682>
2023-05-20 05:48:23 +00:00
Sebastian Dröge
6a0965cb8a tsdemux: Set number of channels to 2 for dual mono Opus
Instead of leaving it at 0, which will then cause caps creation to fail.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4445>
2023-04-18 14:56:44 +03:00
Edward Hervey
38dd5deb66 tsdemux: Minor refactoring
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4336>
2023-04-04 20:54:50 +00:00
Edward Hervey
8e51399334 mpegts: Fix include headers
<gst/mpegts/mpegts.h> is the unique header to use

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4336>
2023-04-04 20:54:50 +00:00
Brad Hards
4087bb9a55 mpegts: remove stream-type from KLV meta
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4310>
2023-03-31 07:03:54 +00:00
Brad Hards
6f2eb752c5 mpegts: add support for KLV metadata in PES packets
Co-authored-by: Andoni Morales Alastruey <ylatuya@gmail.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1312>
2023-03-30 12:16:52 +00:00
Brad Hards
4e14bac1ff mpegts: implement metadata in PES packets
Co-authored-by: Andoni Morales Alastruey <ylatuya@gmail.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1312>
2023-03-30 12:16:52 +00:00
Sebastian Dröge
84e08a377b mpegtsdemux: Fix handling of explicit Opus channel mapping
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4180>
2023-03-23 08:46:50 +00:00
Sebastian Dröge
3851c2da12 tsdemux: Fix reading of extended Opus channel configuration
Argument evaluation order is implementation defined in C, and gcc is
evaluating right-to-left (works) while clang is evaluating left-to-right
(does not work).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4210>
2023-03-18 10:01:25 +00:00
Tim-Philipp Müller
81716a1097 gst-plugins-bad: re-indent with GNU indent 2.2.12
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4182>
2023-03-17 03:18:54 +00:00
Tim-Philipp Müller
2b4b23d2a2 mpegtsdemux: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:07 +00:00
Edward Hervey
f18186b5dc mpegts: Always clear packetizer on DISCONT push mode
If a discontinuity is detected in push mode, we need to clear the cached section
observations since they might have potentially changed.

This was only done properly when operating with TIME segments (dvb, udp,
adaptive demuxers, ...) but not with BYTE segments (such as with custom app/fd
sources).

We still don't want to flush out the PCR observations, since this might be
needed for seeking in push-based BYTE sources.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1650

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3584>
2022-12-18 18:50:19 +00:00
Edward Hervey
c81facec5f mpegts: Check continuity counter on section streams
This wasn't really done, and is needed in order to detect potential section
changes for sections that have got identical information (such as when switching
between streams that have the same PAT/PMT pid and subtable information).

Other checks exist in tsbase to detect if the "new" PAT/PMT really is an update or not.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3530>
2022-12-10 14:24:56 +00:00
Vivia Nikolaidou
ccb0e6e435 tsdemux: Add pad-name to warning for continuity mismatch
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3141>
2022-11-18 12:22:03 +00:00
Edward Hervey
3305d7ce8d tsdemux: Push GST_EVENT_STREAM_COLLECTION
Demuxers that are not streams-aware will have that handled by parsebin. This
created a difference in results downstream between streams-aware and
non-streams-aware demuxers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
a40842545f Revert "mpegtspacketizer: memcmp potentially seen_before data"
This reverts commit fcad4cc646.

This was wrong is so many ways.

* The memcmp was badly used (it should use == 0 to check the data is identical,
  and not != 0)
* There was no boundary checks on the present stream section_data when passing
  it to memcmp.
* The return value should have been TRUE (i.e. we have done all checks, none of
  them failed, therefore the section has been seen before)
* stream->section_data would *always* be NULL if the section had already been
  processed

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1559

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3421>
2022-11-16 12:20:41 +00:00
Edward Hervey
a87b7da308 mpegts: Check is program is identical before updating
There is no need to update the program if it's identical :)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3421>
2022-11-16 12:20:41 +00:00
Edward Hervey
00133ebbe4 mpegtsbase: Don't leak GList
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3390>
2022-11-13 06:59:10 +01:00
Mart Raudsepp
8a2edc6581 tsdemux: Don't trigger a program change when falling back to ignore-pcr behaviour
Since commit a79a756b79 we could change to ignore-pcr automatically at 500ms
into a live stream when no PCR is seen by then. However the stream counting in
program change detection was wrongly considering ignore-pcr programs to have a
separate PCR PID, even though we are actually ignoring the PCR PID completely,
resulting in an erroneous program switch getting triggered from the different
stream count. This in turn would send an EOS and switch out the pads for what
actually is still the same program, while we intended to simply apply a
workaround for broken encoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3060>
2022-09-28 07:18:45 +00:00
Thibault Saunier
6a4425e46a meson: Call pkgconfig.generate in the loop where we declare plugins dependencies
Removing some copy pasted code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Tim-Philipp Müller
9d9e59622f Bump GLib requirement to >= 2.62
Can't require 2.64 yet because of
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/323

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2568>
2022-06-10 06:01:41 +00:00
Edward Hervey
89780341e8 tsdemux: Demote warning to simple debug
That issue is actually handled, so don't pollute the logs with such warning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2340>
2022-05-02 09:15:57 +02:00
Edward Hervey
10f72da504 mpegts: Handle "empty" PMT gracefully
Some streams have 2 PMT sections in a single TS packet. The first one is "valid"
but doesn't contain/define any streams. That causes an unrecoverable issue when
we try to activate the 2nd (valid) PMT.

Instead of doing that, pre-emptively refuse to process PMT without any streams
present within. We still do post that section on the bus to inform applications.

Fixes #1181

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2310>
2022-04-28 09:36:54 +00:00
Xavier Claessens
b99ecc78ca Replace gst-i18n-*.h with gi18n-lib.h
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.

This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Edward Hervey
d678d7136c tsdemux: Fix AC-4 detection
This regression was introduced by
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1102
and has been present since 1.18

* Stream Type 0x06 is defined in the base mpeg-ts specification as Private PES
Packets. Determining the content should be solely based on descriptors found
within the PMT.
* This was abused in that commit by defining a "bluray-only" stream type for AC4
: `ST_BD_AUDIO_AC4`
* This should be entirely handled in the regular private pes handling further
down in the code

Fixes #1154

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2175>
2022-04-14 08:33:34 +02:00
Vivia Nikolaidou
fabf948194 tsdemux: Don't check SCTE events for being too far from the PCR
Otherwise it happens that SCTE events can only be scheduled up to 15
seconds since the last seen PCR, which is a useless restriction.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2021>
2022-03-24 18:59:37 +00:00
Edward Hervey
fb81c4dbf5 mpegts: Handle glib < 2.58
By using a workaround to the lack of g_ptr_array_steal_index.

Fixes #1078

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1917>
2022-03-10 17:24:45 +00:00
Edward Hervey
a95a3ca807 tsbase: Handle more program updates
There could be a case where the new program has the same program number as the
previous one ... but is actually located on a PID previously used for elementary
stream. In that case the program is guaranteed to not be an update of the
previous program but a completely new one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1893>
2022-03-09 19:45:08 +00:00
Edward Hervey
76543ee73a mpegtsbase: Use an array to track programs
We need to be able to look for programs by their PID also. Using a hash table
was a bit sub-par (and overkill) for storing a range of programs.

This is needed because there could potentially be two programs with the same
program id but different PMT PID (while one is being deactivated the new one
would "exist").

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1893>
2022-03-09 19:45:08 +00:00
Edward Hervey
03b1790e0d tsdemux: Handle PES headers bigger than a mpeg-ts packet
While the actual PES header parser could notify us that it needed more data, we
would never actually act on it.

This commit will accumulate incoming packets in such situation and re-attempt
the header parsing.

Fixes #1027

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1852>
2022-03-04 15:14:31 +00:00
Stéphane Cerveau
a4b83810fe tsdemux: unlock mutex on -1 start_offfset
Closing #1013

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1694>
2022-02-14 12:58:33 +00:00
Vivia Nikolaidou
6bf36f6e0f tsdemux: Change many GST_{DEBUG, LOG, etc} into _OBJECT
Log files with several demuxers running at once can otherwise get
confusing

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1096>
2021-10-18 18:34:04 +00:00
Vivia Nikolaidou
300e784a20 tsdemux: Issue GST_ELEMENT_WARNING for continuity errors
The application might want to make use of these.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1096>
2021-10-18 18:34:04 +00:00
Vivia Nikolaidou
273e2a1db6 mpegtsbase: Search SCTE-35 DRF_ID_CUEI in multiple registration descriptors
There are streams in the wild that have to add a SCTE-35 trigger in
another e.g. GA94 stream. Most encoders would replace the GA94
descriptor ID with the CUEI one temporarily, but there are some that
will add two registration ID descriptors, one with GA94 and one with
CUEI.

Failing to parse the CUEI registration ID in that case would return
FALSE in _stream_is_private_section , therefore setting it as known PES
and pushing packets downstream instead of calling handle_psi.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/979>
2021-10-18 13:58:39 +00:00
Edward Hervey
d9b1e1e99f tsdemux: Improve gap detection
We should also take into account whether data is currently pending when checking
for gap on streams. It could very well be that some streams have very low
bitrate (and spread out) data. For those we don't want to push out a gap event.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1179>
2021-10-18 11:23:25 +00:00
Edward Hervey
0ff569d408 tsdemux: Handle "negative" timestamps
This is only enabled in push time mode. Furthermore it's only enabled for now if
PCR is to be ignored.

The problem is dealing with streams where the initial PTS/DTS observation might
be greater than following ones (from other PID for example). Before this patch,
this would result in sending buffers without any timestamp which would cause a
wide variety of issues.

Instead, pad segment and buffer timestamps with an extra
value (packetizer->extra_shift, default to 2s), to ensure that we can get valid
timestamps on outgoing buffers (even if that means they are before the segment
start).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1179>
2021-10-18 11:23:25 +00:00
Edward Hervey
74e9d44db3 tsdemux: Handle streams with bogus PTS vs DTS
PTS and DTS should be within a reasonable distance of each other.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1179>
2021-10-18 11:23:25 +00:00
Edward Hervey
6efa9dc00e tsdemux: Handle PTS->TS at wraparound
This has been a FIXME for ages.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1179>
2021-10-18 11:23:25 +00:00
Vivia Nikolaidou
23bf9f75b6 tsdemux: Handle delayed seek events
Store the event in case it cannot be processed immediately and process
it after the first segment has been produced.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/980>
2021-10-14 21:45:00 +00:00
Vivia Nikolaidou
5800ffea0f tsdemux: Protect demux->segment_event with a mutex
Would otherwise cause weird issues when processing a delayed seek event

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/980>
2021-10-14 21:45:00 +00:00
Jan Alexander Steffens (heftig)
0596da1966 mpegtsparse: Don't assert the packet_size when filling for EOS
If the packetizer got reset for any reason (failure to find PCR?) then
the packet_size can be zero here even though we already enqueued some
packets.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1038>
2021-10-05 09:38:27 +00:00
Mathieu Duponchelle
f0a158407c mpegts: add missing Since comments after SCTE 35 work
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/913>
2021-09-25 01:29:38 +00:00