Mark Nauwelaerts
2a22e9d487
qtdemux: convert some more mov format timestamp to gst time
2010-07-16 13:58:21 +02:00
Arun Raghavan
8aed3176ce
qtdemux: Fix order of bitrates in 'btrt' atom
...
There seems to be a bug in libmp4v2 that generates a MPEG4BitRateBox as
(bufferSizeDB, avgBitrate, maxBitrate) instead of (bufferSizeDB,
maxBitrate, avgBitrate), according to the spec. I used the mp4file
output while writing this code, so the order is wrong. This patches
fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=623654
2010-07-06 10:33:16 +01:00
Edward Hervey
fcf1995020
qtdemux: strip out bogus tags from XMP atom
...
https://bugzilla.gnome.org/show_bug.cgi?id=623366
2010-07-02 14:39:36 +02:00
Robert Swain
50273537dc
qtdemux: Round timestamp up when scaling to mov format
...
Fix timestamp rounding to allow the correct index to be located.
The issue was that scaling from GStreamer time format to mov time format was
rounding down causing the timestamp of the newsegment event received after a
flushing keyframe seek to find the sample index before the one it should
causing further backward seeking to the keyframe prior until no rounding error
occurred.
Rounding up when scaling to mov format has the desired effect, and it is
not clear whether just the _round () variant would be sufficient.
Fixes bug #619105
2010-05-26 00:08:16 +01:00
David Schleef
e847957790
qtdemux: Add VP8
2010-05-17 17:18:25 +02:00
Mark Nauwelaerts
bcde9fab09
qtdemux: fix push based seeking
...
... where it comes down to transforming incoming BYTE segment
to a corresponding TIME segment.
Also fixes #609405 .
2010-05-11 18:44:01 +02:00
Mark Nauwelaerts
e934f637b6
qtdemux: fix partial parsing of ctts table
...
Fixes #616516 .
2010-05-11 11:06:20 +02:00
Mark Nauwelaerts
a9e688cf32
qtdemux: cleanup a comment and add some debug and conditional compilation
2010-05-11 11:06:17 +02:00
David Schleef
1df1d34fe1
qtdemux: UYVY is 4:2:2, not 4:2:0
2010-04-30 17:19:44 -07:00
Tim-Philipp Müller
a155deaabf
matroskademux, qtdemux: minor code cleanup in avc_level_idc_to_string()
...
Do the same with slightly fewer LOC.
2010-04-12 15:10:11 +01:00
Arun Raghavan
861311e8f6
qtdemux: Post avg./max. bitrate tags for H.264
...
This reads the average and maximum bitrates from the 'btrt' atom if
available, and pushes these as tags,
https://bugzilla.gnome.org/show_bug.cgi?id=614927
2010-04-07 11:55:32 +02:00
Thiago Santos
f966ff66f8
qtdemux: Read replaygain peak/gain tags
...
Make qtdemux read tags replaygain tags that are within '----' atoms.
Fixes #614471
2010-04-02 15:23:51 -03:00
Arun Raghavan
95c6d558f0
matroska: Export h.264 profile and level in caps
...
This replicates the code in qtdemux to export the h.264 profile and
level in the stream caps.
https://bugzilla.gnome.org/show_bug.cgi?id=614651
2010-04-02 18:51:34 +02:00
Sebastian Dröge
9317ad6fe9
qtdemux: Fix off-by-one introduced in last commit
2010-04-02 18:50:45 +02:00
Arun Raghavan
ccef64be39
qtdemux: Minor refactor of the code
...
This will make it easier to clump together common code when copying to
mastroskademux.
https://bugzilla.gnome.org/show_bug.cgi?id=614651
2010-04-02 18:49:20 +02:00
Arun Raghavan
d6dcd70b4c
qtdemux: Export h.264 level in caps
...
This exports the h.264 level in the stream caps (as a string) which can
be used to match a decoder, or as metadata.
https://bugzilla.gnome.org/show_bug.cgi?id=614651
2010-04-02 18:48:45 +02:00
Arun Raghavan
503f0988bf
qtdemux: Export h.264 profile in caps
...
This adds the h.264 profile for a given stream into caps. This can
(eventually) be used to select an appropriate decoder and as metadata
for certain applications.
https://bugzilla.gnome.org/show_bug.cgi?id=614651
2010-04-02 18:48:23 +02:00
Tim-Philipp Müller
af5e4d935a
qtdemux: extract stream language in more cases
...
The 16-bit language code can be either a packed ISO-639-2T code
or a 'Macintosh language code'. Handle the latter type of language
codes as well, and map to the matching ISO code. Lastly, fix
language code posting for language #0 , which is valid and stands
for 'English'.
Fixes #614001 .
2010-03-26 17:02:50 +00:00
Benjamin Otte
3f511ec361
Add -Wwrite-strings to the configure flags
...
... and fix all warnings
2010-03-21 14:17:47 +01:00
Tim-Philipp Müller
073201b329
build: Makefile.am cleanups
...
Mostly add $(GST_BASE_CFLAGS) where it was missing, but also fix up
order of flags and libs if needed (see docs/random/moving-plugins).
2010-03-18 21:34:24 +00:00
Benjamin Otte
cccfeaa59c
gst_element_class_set_details => gst_element_class_set_details_simple
2010-03-18 14:32:00 +01:00
Benjamin Otte
3342b1679e
Add -Wmissing-declarations -Wmissing-prototypes warning flags
...
And fix all the warnings.
2010-03-17 18:23:28 +01:00
Thiago Santos
5efda5caf7
qtdemux: add XMP parsing support
...
Use xmp helpers to parse XMP metadata in udta atom.
Fixes #609539
2010-03-11 19:04:49 -03:00
Edward Hervey
32498746ad
qtdemux: Fix print statements for pointer differences.
...
This fixes it for both 32 and 64 bit
2010-03-11 17:28:47 +01:00
Edward Hervey
8d794e6a9f
qtdemux: Fix unitialized variables
2010-03-11 17:28:35 +01:00
Thiago Santos
145b3a3079
qtdemux: Set stream-format=raw on AAC caps
...
Set stream-format=raw for AAC caps, as that is the
expected AAC format to be in this container family.
Fixes #566250
2010-03-11 09:38:32 -03:00
Mark Nauwelaerts
561a506822
qtdemux: avoid erroneous codec-data overriding of stsd information
2010-03-10 11:48:06 +01:00
Robert Swain
8d801f41d8
qtdemux: Fix off-by-one logic error in frame rate cap regression commit
2010-02-18 18:20:24 +01:00
Thiago Santos
f1c61e1d84
qtdemux: Use the correct duration when comparing segments
...
Do not confuse QtDemuxSegments with GstSegments when
comparing the total file duration with the segment duration
Fixes #610296
2010-02-18 07:53:34 -03:00
Robert Swain
2723de585e
qtdemux: add durations modulo 1<<32
...
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.
Fixes #610280
2010-02-17 18:06:29 +01:00
Mark Nauwelaerts
d14685eb08
qtdemux: fix ALAC codec-data handling
...
ALAC codec-data apparently comes in (at least) two flavours (mov, mp4),
so use atom based parsing to retrieve required data, rather than
aiming for a specific offset.
See also #580731 .
2010-02-16 16:22:28 +01:00
Mark Nauwelaerts
105d8c925b
qtdemux: fix debug message
2010-02-16 16:09:36 +01:00
Mark Nauwelaerts
58d84a993c
qtdemux: handle signed values in 3GPP location tag
2010-02-16 16:09:26 +01:00
Robert Swain
e2f5409d40
qtdemux: Fix frame rate cap regression
...
Look for a non-zero min_duration during initialisation to avoid
incorrect frame rate caps.
2010-02-16 14:44:11 +01:00
Robert Swain
4aff3e48be
qtdemux: temporary safety check to avoid crashes with a certain file
...
Add temporary check to avoid crashes with a certain file when seeking
until the real cause of this is figured out. See #609405 .
2010-02-10 20:36:56 +00:00
Robert Swain
7877ffb6f5
qtdemux: skip unknown atoms when looking for moov
...
Fixes bug #609107
2010-02-07 10:56:02 +01:00
Robert Swain
9ed6c58006
qtdemux: Set the segment start time to the requested seek time for non-keyframe seeks
2010-02-04 18:54:58 +00:00
Robert Swain
8d4f70c5ce
qtdemux: Fix time returned for index at a byte offset
...
The logic for searching forwards/backwards was swapped
2010-02-04 18:54:53 +00:00
Edward Hervey
cb0474b6b3
qtdemux: dmb1 is a valid fourcc for Motion-JPEG
2010-01-23 14:47:55 +01:00
Edward Hervey
a782ef3ce8
qtdeux: IV32 is also used for Indeo 3 video streams
2010-01-23 14:20:02 +01:00
Roland Krikava
8a80fdaad1
qtdemux: Avoid negative overflow on keyframe search
...
Do not overflow negatively when searching a previous
"keyframe" on audio streams. Could cause infinite loops
on backwards playback
Fixes #607718
2010-01-21 23:20:34 -03:00
Alessandro Decina
5d3d3f28e1
qtdemux: fix compiler warnings under OS X.
2010-01-21 19:24:22 +01:00
Mark Nauwelaerts
8ca984d5e8
qtdemux: always keep media segments within total duration
...
... as opposed to only doing so following a seek.
2010-01-20 16:03:21 +01:00
Thiago Santos
e61a71b490
qtdemux: g_free is NULL safe
2010-01-15 13:42:30 -03:00
Thiago Santos
b07f406634
qtdemux: use DEMUX errors, instead of DECODE
...
qtdemux should use DEMUX errors, and not DECODE
Conflicts:
gst/qtdemux/qtdemux.c
2010-01-15 13:42:30 -03:00
Thiago Santos
b988ff4f57
qtdemux: Minor refactor
...
Replace repeated code with a function call
2010-01-15 13:42:30 -03:00
Thiago Santos
92a83e016a
qtdemux: Handle another kind of redirect trak
...
Some traks might contain a redirect rtsp uri inside
hndl atom (which is a dref atom entry). This commit makes qtdemux
post a message when it finds one of these traks and there are
no other traks.
Fixes #597497
2010-01-15 13:42:29 -03:00
Thiago Santos
06de494640
qtdemux: Post error when reaching EOS without pads
...
Post an error when EOS is reached and there are no src pads
2010-01-15 13:42:22 -03:00
Thiago Santos
b53a45ed44
qtdemux: Do not post empty redirect messages
...
Some misinterpreted data could result in posting redirect messages
with empty redirect strings. It is better not to post them.
An example is the file on bug #597497
2010-01-15 13:13:59 -03:00
Edward Hervey
3f5add8820
qtdemux: use G_GSIZE_FORMAT for platform independent gsize qualifier
...
Fixes build on macosx
2010-01-12 17:39:05 +01:00