Commit graph

223 commits

Author SHA1 Message Date
Tim-Philipp Müller
a6cd61b86a docs: fix multiqueue docs for new template names foo_%d -> foo_%u
https://bugzilla.gnome.org/show_bug.cgi?id=726358
2014-03-14 18:40:31 +00:00
Thiago Santos
0e2f63654b multiqueue: if buffering is disabled while buffering, post 100% message
Avoids stall waiting for buffering to reach 100%
2014-03-10 09:49:05 -03:00
Thiago Santos
b6470a7b3f multiqueue: do not reset last push result when pushing events
Use the last result as a default when pushing a item from a single queue,
otherwise the status gets reset to _OK when pushing events.

This causes problems when mistakenly activating a not-linked stream
that is being ignored upstream as it is not being used (adaptive
scenarios), it will make the multiqueue post a buffering message
on a pad that won't receive buffers

https://bugzilla.gnome.org/show_bug.cgi?id=725917
2014-03-10 09:48:58 -03:00
Sebastian Dröge
5737f4f367 multiqueue: If we only have a single pad, don't consider all pads not linked and grow the queue indefinitely 2014-02-20 15:35:11 +01:00
Arnaud Vrac
a93615aea1 multiqueue: do not reduce single queue below current level
When the single queue size was just bumped by 1 to allow more buffers to
be added, the buffers limit could be reduced to the current level when
setting the max-size-buffers property. This would result in a stall
since the queue would not grow anymore at this point.

Prevent this by not reducing a single queue size below the current
number of buffers + 1.

https://bugzilla.gnome.org/show_bug.cgi?id=712597
2014-01-27 19:57:35 +01:00
Sebastian Dröge
454ee04a22 multiqueue: Break the loop immediately if we found an empty queue
No need to continue looking at all the others
2014-01-24 09:28:05 +01:00
Per x Johansson
4f928547a8 multiqueue: Allow growing a queue if all other queues are not linked
In the case where one singlequeue is full and all other are not linked, the
growing of the full queue does not work correctly. The result depends on if
the full queue is last in the queue list or not.

https://bugzilla.gnome.org/show_bug.cgi?id=722891
2014-01-24 09:27:28 +01:00
Thiago Santos
139c96c129 multiqueue: prevent buffering forever with playbin
When prerolling/buffering, multiqueue has its buffers limit set
to 0, this means it can take an infinite amount of buffers.

When prerolling/buffering finishes, its limit is set back to 5, but
only if the current level is lower than 5. It should (almost) never be
and this will cause prerolling/buffering to need to wait to reach the
hard bytes and time limits, which are much higher.

This can lead to a very long startup time. This patch fixes this
by setting the single queues to the max(current, new_value) instead
of simply ignoring the new value and letting it as infinite(0)

https://bugzilla.gnome.org/show_bug.cgi?id=712597
2014-01-15 09:51:35 -03:00
Sebastian Dröge
c343ebd454 multiqueue: Allow growing a queue if all other queues are not linked
See https://bugzilla.gnome.org/show_bug.cgi?id=719893
2014-01-08 09:54:01 +01:00
YanpingZhang
1de533735b multiqueue: Fix hanging if shut down while handling a serialized query
https://bugzilla.gnome.org/show_bug.cgi?id=721253
2014-01-03 11:15:33 +01:00
Thiago Santos
1f71f191be multiqueue: post 100% buffering if single queue is not linked
This makes buffering stop in case a stream switch happens. This is
important for adaptive streams that can disable not-linked streams
to avoid consuming the network bandwidth.

https://bugzilla.gnome.org/show_bug.cgi?id=719575
2013-12-20 01:10:47 -03:00
Sebastian Rasmussen
53ae1b2c9c docs: Fix typos in function/object descriptions
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=720029
2013-12-07 17:11:12 +00:00
Olivier Crête
a90ce304c8 multiqueue: Wake up on reconfigure event
After patch bda406c4, the state of the singlequeue was set to OK, but nothing
would then wake up the thread, as the other wakeup functions only look at
singlequeues that are marked as having received as not-linked.

https://bugzilla.gnome.org/show_bug.cgi?id=708200
2013-12-03 12:40:11 -05:00
Matej Knopp
7f657358a8 multiqueue: Don't reduce single queue visible size below its current level
If the multiqueue has automatically grown chances are good that
we will cause the pipeline to starve if the maximum level is reduced
below that automatically grown size.

https://bugzilla.gnome.org/show_bug.cgi?id=707156
2013-09-04 10:52:13 +02:00
Sebastian Dröge
b40599f6db multiqueue: Clean up after the streaming thread has stopped
https://bugzilla.gnome.org/show_bug.cgi?id=705835
2013-08-19 16:38:50 +02:00
Sebastian Dröge
0dc232e114 multiqueue: only block serialized query when it's safe
We must be certain that we don't cause a deadlock when blocking the serialized
queries. One such deadlock can happen when we are buffering and downstream is
blocked in preroll and a serialized query arrives. Downstream will not unblock
(and allow our query to execute) until we complete buffering and buffering will
not complete until we can answer the query..

https://bugzilla.gnome.org/show_bug.cgi?id=702840
2013-07-16 11:36:50 +02:00
Sebastian Dröge
ab6a1085ee (multi)queue: Don't access query items during flushing 2013-05-27 16:38:18 +02:00
Sebastian Dröge
e472d9d261 multiqueue: Don't do serialized queries when we're flushing
Just immediately fail the query, otherwise we would wait forever
for the query to be answered.
2013-05-27 16:22:00 +02:00
Sebastian Dröge
b6fac17502 queue/queue2/multiqueue: When flushing, make sure to not lose any sticky events
https://bugzilla.gnome.org/show_bug.cgi?id=688824
2013-05-27 13:01:43 +02:00
Sebastian Dröge
a79d3a0220 multiqueue: Initialize all GstMultiQueueItem fields in both code paths 2013-05-24 18:42:55 +02:00
Sebastian Dröge
1c6341e6a4 multiqueue: Don't access the query after signalling the waiting thread
It might've free'd the query already.
2013-05-24 18:38:40 +02:00
Sebastian Dröge
3b44a44a01 multiqueue: Make sure to always signal any possible pending serialized queries
And don't unref them when flushing the queue, they're owned by the caller!

https://bugzilla.gnome.org/show_bug.cgi?id=700342
2013-05-24 18:30:44 +02:00
Wim Taymans
fa371dad6d multiqueue: ignore empty not-linked queues
We need to ignore the not-linked queues in the underrun and overrun callbacks
because they are expected to be empty.
2013-04-05 10:15:37 +02:00
Wim Taymans
bda406c42f multiqueue: start pushing again on RECONFIGURE
When we got NOT_LINKED before and we receive a RECONFIGURE event, start pushing
again on the source pad.

See https://bugzilla.gnome.org/show_bug.cgi?id=676304
2013-04-04 19:16:23 +02:00
Branko Subasic
17bff49262 multiqueue: correct overrun handling
The control of wheteher a SingleQueue is full is not correct.
Rewrote single_queue_overrun_cb() so it checks the correct variables
when checking if the queue has reached the hard limits, and to
increase the max buffer limit once for each call.

https://bugzilla.gnome.org/show_bug.cgi?id=690557
2012-12-20 15:34:01 +01:00
Tim-Philipp Müller
666c8c11c6 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-03 20:44:48 +00:00
Jan Schmidt
698324d48b multiqueue: Add EOS status to debug output about filled/unfilled 2012-10-30 10:04:14 +11:00
Sebastian Dröge
09982c3c13 dataqueue/queuearray: Make public API again
These are actually used outside of coreelements nowadays.
Also hide lots of internals and add padding and documentation.
2012-10-25 14:03:01 +02:00
Josep Torra Valles
111fcc6e31 Make intel compiler happier
https://bugzilla.gnome.org/show_bug.cgi?id=552657
2012-09-25 00:56:26 +01:00
Edward Hervey
d3ffa82639 Remove 0.10-related documentation and "Since" markers 2012-07-10 12:03:27 +02:00
Wim Taymans
76e8b2ecda task: add GDestroyNotify to _new
Add a GDestroyNotify to the user_data we pass to gst_task_new()
Change gst_pad_start_task() to also take the notify
2012-06-20 10:31:49 +02:00
Matej Knopp
c4b71c2574 multiqueue: gst_single_queue_flush unlocks the queue twice
https://bugzilla.gnome.org/show_bug.cgi?id=674044
2012-04-13 23:57:35 +01:00
Sebastian Dröge
1a61f3ec19 Merge remote-tracking branch 'origin/0.10' 2012-04-09 16:42:30 +02:00
Sebastian Dröge
829eafad0e multiqueue: Don't use buffer after pushing it downstream 2012-04-09 16:40:47 +02:00
Tim-Philipp Müller
a63829b4ff plugins: use new gst_element_class_set_static_metadata() 2012-04-09 13:05:07 +01:00
Sebastian Dröge
4b6c3c7fea Merge remote-tracking branch 'origin/0.10'
Conflicts:
	plugins/elements/gstmultiqueue.c
2012-03-29 14:54:53 +02:00
Sebastian Dröge
9441e711df multiqueue: Wake up all not-linked streams when a stream switches from linked to not-linked
We reset all the waiting streams, let them push another buffer to
see if they're now active again. This allows faster switching
between streams and prevents deadlocks if downstream does any
waiting too.

Also improve locking a bit, srcresult must be protected by the
multiqueue lock too because it's used/set from random threads.
2012-03-29 14:49:53 +02:00
Sebastian Dröge
17e691421f multiqueue: Recompute high-time too when flushing, not only high-id 2012-03-29 14:47:57 +02:00
Wim Taymans
d540a5fc68 multiqueue: handle serialized queries 2012-03-19 11:45:27 +01:00
Wim Taymans
9e2ef19dc2 queues: warn when receiving a serialized event
.. until we implement it.
2012-03-14 16:00:48 +01:00
Wim Taymans
7ab1d62c24 GST_FLOW_WRONG_STATE -> GST_FLOW_FLUSHING 2012-02-08 16:18:04 +01:00
Tim-Philipp Müller
13d91d1f6c Use recent GLib API unconditionally now that we depend on the latest GLib 2012-01-22 01:25:22 +00:00
Wim Taymans
252327f87a Update for new gthread API 2012-01-19 09:27:04 +01:00
Tim-Philipp Müller
a1daf846f3 Merge remote-tracking branch 'origin/master' into 0.11
Conflicts:
	gst/gstobject.h
	libs/gst/check/gstcheck.h
	libs/gst/controller/gstcontroller.c
	plugins/elements/gstidentity.c
	tools/gst-xmlinspect.c
2011-12-04 15:38:09 +00:00
Tim-Philipp Müller
2666450864 Suppress deprecation warnings in selected files, for g_static_rec_mutex_* mostly
GStaticRecMutex is part of our API/ABI, not much we can do here in 0.10.
2011-12-04 14:38:26 +00:00
Sebastian Dröge
1fa356a23c Merge branch 'master' into 0.11
Conflicts:
	gst/gstpad.c
	libs/gst/base/gstbaseparse.c
2011-11-24 11:23:07 +01:00
Vincent Penquerc'h
611ac6ea85 multiqueue: check filled state of queues even if another one is empty
This will avoid a case where overrun is never signalled if some
stream never produces any data, causing playbin2 to not end preroll.

https://bugzilla.gnome.org/show_bug.cgi?id=660778
2011-11-24 10:38:34 +01:00
Wim Taymans
2f1ed65339 pad: Merge pad mode activation functions
Add the pad mode to the activate function so that we can reuse the same function
for all activation modes. This makes the core logic smaller and allows for some
elements to make their activation code easier. It would allow us to add more
scheduling modes later without having to add more activate functions.
2011-11-21 13:29:05 +01:00
Wim Taymans
39a5e26ea9 pad: add parent to activate functions 2011-11-18 13:54:29 +01:00
Wim Taymans
612b1fbb14 pad: add parent to other functions
Add parent to chain, chain_list, getrange and event functions.
2011-11-17 12:40:45 +01:00
Wim Taymans
361a7ae44d add parent to internal links 2011-11-16 17:49:46 +01:00
Wim Taymans
09a8294d36 pad: add parent to the query function 2011-11-16 17:22:56 +01:00
Wim Taymans
54e1174060 GstPadFlags: rename flags GST_PAD_* -> GST_PAD_FLAG_* 2011-11-16 12:36:51 +01:00
Wim Taymans
06d4828df3 plugins: remove obsolete parent checks 2011-11-16 12:11:12 +01:00
Wim Taymans
b5c3e254b1 pad: remove getcaps and use caps query
Remove the getcaps function on the pad and use the CAPS query for
the same effect.
Add PROXY_CAPS to the pad flags. This instructs the default caps event and query
handlers to pass on the CAPS related queries and events. This simplifies a lot
of elements that passtrough caps negotiation.
Make two utility functions to proxy caps queries and aggregate the result. Needs
to use the pad forward function instead later.
Make the _query_peer_ utility functions use the gst_pad_peer_query() function to
make sure the probes are emited properly.
2011-11-15 11:20:48 +01:00
Wim Taymans
b7966c0c7d pad: make an ACCEPT_CAPS query
Replace the acceptcaps function with a query.
2011-11-09 17:36:00 +01:00
Wim Taymans
ac9e5533b5 pad: add more queries
Add more query functions to prepare for doing more with queries
2011-11-09 11:22:36 +01:00
Wim Taymans
9c0d8ca718 Merge branch 'master' into 0.11
Conflicts:
	gst/gstelement.h
	gst/gstghostpad.c
	gst/gstminiobject.c
2011-11-08 12:54:15 +01:00
Tim-Philipp Müller
16dcd5e958 docs: fix Since: markers for API added after 0.10.35 2011-11-08 00:32:36 +00:00
Wim Taymans
d169fa8728 fix request pad
Make all request pads take _%u in the template.
Fix up unit tests.
2011-11-03 17:49:45 +01:00
Wim Taymans
88e12228cf bufferlist: clean up API
gst_buffer_list_len() -> gst_buffer_list_length()
gst_buffer_list_sized_new() -> gst_buffer_list_new_sized()
2011-11-02 08:59:43 +01:00
Wim Taymans
ea012d3dd7 pad: GST_FLOW_UNEXPECTED -> GST_FLOW_EOS 2011-10-10 11:33:51 +02:00
Sebastian Dröge
43538e2e75 Merge branch 'master' into 0.11
Conflicts:
	docs/design/draft-buffer2.txt
	docs/design/part-TODO.txt
	docs/design/part-block.txt
	docs/design/part-bufferlist.txt
	docs/design/part-caps.txt
	docs/design/part-element-transform.txt
	docs/design/part-events.txt
	docs/design/part-negotiation.txt
	gst/gstcaps.c
	gst/gstevent.h
	gst/gstghostpad.c
	gst/gstinterface.c
	gst/gstpad.c
	gst/gstpad.h
	gst/gstutils.c
	libs/gst/base/gstbasesink.c
	libs/gst/base/gstbasesrc.c
	libs/gst/base/gstbasetransform.c
	libs/gst/base/gsttypefindhelper.c
	plugins/elements/gstcapsfilter.c
	plugins/elements/gsttee.c
	tests/check/generic/sinks.c
	tools/gst-launch.1.in
2011-09-08 14:28:23 +02:00
Piotr Fusik
14f5518f3d docs, gst: typo fixes
https://bugzilla.gnome.org/show_bug.cgi?id=658449
2011-09-07 18:03:17 +01:00
Tim-Philipp Müller
5a8273e527 Merge branch 'master' into 0.11 2011-06-05 15:48:51 +01:00
David Schleef
f3eac7de22 Work around changes in g_atomic API
See #651514 for details.  It's apparently impossible to write code
that avoids both type punning warnings with old g_atomic headers and
assertions in the new.  Thus, macros and a version check.
2011-06-04 00:36:26 -07:00
Sebastian Dröge
a46c9c2a62 event: Make SEGMENT event parsing API more consistent with the others 2011-05-18 16:56:43 +02:00
Sebastian Dröge
3d2127f865 Revert "query: allow _make_writable on query handlers"
This reverts commit cf4fbc005c.

This change did not improve the situation for bindings because
queries are usually created, then directly passed to a function
and not stored elsewhere, and the writability problem with
miniobjects usually happens with buffers or caps instead.
2011-05-17 11:21:41 +02:00
Sebastian Dröge
b935a814d9 Merge branch 'master' into 0.11
Conflicts:
	configure.ac
	docs/gst/gstreamer-sections.txt
	gst/gstbin.c
	gst/gstelement.c
	gst/gstelement.h
	gst/gstghostpad.c
	gst/gstminiobject.c
	gst/gstminiobject.h
	libs/gst/base/gstbasesrc.c
	libs/gst/base/gstbasetransform.c
	plugins/elements/gstinputselector.c
	tests/check/gst/gstminiobject.c
2011-05-16 16:53:04 +02:00
Sebastian Dröge
43e165c93c elements: Update for negotiation related API changes
The filter caps are only forwarded and returned instead
of ANY caps in the core elements because they don't do
anything caps specific.
2011-05-16 15:33:11 +02:00
Wim Taymans
bdbc069348 Rework GstSegment handling
Improve GstSegment, rename some fields. The idea is to have the GstSegment
structure represent the timing structure of the buffers as they are generated by
the source or demuxer element.
gst_segment_set_seek() -> gst_segment_do_seek()
Rename the NEWSEGMENT event to SEGMENT.
Make parsing of the SEGMENT event into a GstSegment structure.
Pass a GstSegment structure when making a new SEGMENT event. This allows us to
pass the timing info directly to the next element. No accumulation is needed in
the receiving element, all the info is inside the element.
Remove gst_segment_set_newsegment(): This function as used to accumulate
segments received from upstream, which is now not needed anymore because the
segment event contains the complete timing information.
2011-05-16 11:37:52 +02:00
Tim-Philipp Müller
76ccd2a1e9 docs: fix up some Since markers and update for new multiqueue args 2011-05-14 14:05:52 +01:00
Sebastian Dröge
9f83109706 multiqueue: Add mode to synchronize deactivated/not-linked streams by the running time
Fixes bug #645107, #600648.
2011-05-14 11:39:35 +02:00
Mark Nauwelaerts
24888ecc70 multiqueue: ensure thread safety when adding a pad
This seems to be a regression, and was causing crashes.

https://bugzilla.gnome.org/show_bug.cgi?id=649878
2011-05-10 18:07:01 +01:00
Wim Taymans
cf4fbc005c query: allow _make_writable on query handlers
Pass a GstQuery ** to the query handlers so that they can make the query
writable before using a setter on it.
Port code to new API.
2011-05-10 18:36:33 +02:00
Wim Taymans
84a1f4ba7f element: use request_new_pad_full as the default
Add GstCaps to request_new_pad so that request_new_pad_full can be removed.
Fix elements.
2011-05-10 16:41:36 +02:00
Wim Taymans
c07b57fc05 segment: remove _full version
Rename the _full versions of the functions to the normal function names.
2011-05-09 17:51:07 +02:00
Wim Taymans
02e5feb2bf pad: avoid using the old GST_PAD_CAPS
Don't use GST_PAD_CAPS but instead use the new gst_pad_get_current_caps()
method.
Avoid setting caps on buffers.
2011-05-06 19:04:54 +02:00
Sebastian Dröge
caa16f2fa9 elements: Update everything for the new GstIterator API 2011-05-05 15:36:04 +02:00
Wim Taymans
c4751ec8c1 Revert "context: use context on buffers instead of caps"
This reverts commit 9ef1346b1f.

Way to much for one commit and I'm not sure we want to get rid of the pad caps
just like that. It's nice to have the buffer and its type in onw nice bundle
without having to drag the complete context with it.
2011-05-05 13:17:08 +02:00
Wim Taymans
9ef1346b1f context: use context on buffers instead of caps
Put the srcpad context on buffers instead of caps. This allows us to associate
all the relevant info contained in events with a buffer.
2011-05-04 18:59:47 +02:00
Wim Taymans
6ab7e6c15d Remove pad_alloc, this can now be done better
Remove pad_alloc and all references. This can now be done more efficiently and
more flexible with the ALLOCATION query and the bufferpool objects. There is no
reverse negotiation yet but that will be done with an event later.
2011-04-29 13:26:19 +02:00
Sebastian Dröge
5020738a6d elements: Use G_DEFINE_TYPE instead of GST_BOILERPLATE 2011-04-19 11:45:36 +02:00
Sebastian Dröge
f51a23a83c Merge branch 'master' into 0.11 2011-04-16 08:59:58 +02:00
Sebastian Dröge
ea36e12bbc multiqueue: Don't leak the sinkpad name 2011-04-14 09:07:48 +02:00
Wim Taymans
6be4dbdb5a Merge branch 'master' into 0.11
Conflicts:
	android/base.mk
	android/controller.mk
	android/dataprotocol.mk
	android/elements.mk
	android/gst-inspect.mk
	android/gst-launch.mk
	android/gst-plugin-scanner.mk
	android/gst.mk
	android/indexers.mk
	android/net.mk
	win32/common/libgstbase.def
2011-04-11 10:26:54 +02:00
Sebastian Dröge
6d97652903 multiqueue: Add another check for the flushing flag after taking the lock
This prevents another potential deadlock when flushing the pad
at exactly the right time.
2011-04-08 09:15:56 +02:00
Wim Taymans
7a62d32a07 Merge branch 'master' into 0.11-fdo
Conflicts:
	docs/plugins/gstreamer-plugins.hierarchy
	gst/gstelement.c
2011-03-30 19:58:52 +02:00
Sebastian Dröge
8db570f48c multiqueue: Make assignment of queue IDs and pad names threadsafe
Also add a test for naming pads by the caller and return NULL
when requesting an already existing pad.
2011-03-30 10:52:36 +02:00
Andreas Frisch
5368406a57 multiqueue: Set the single queue ID to the ID of the requested pad if one was given by the caller 2011-03-30 10:18:54 +02:00
Fraxinas
86bbc85ab1 multiqueue: Fix arbitrary sink + source pad naming
Use the string provided by the caller for the sinkpad name
if possible. Note that all sanity checking for this name
is already done in GstElement.

Fixes Bug #645931
2011-03-29 11:31:03 +02:00
Wim Taymans
a12ede3fb1 Merge branch 'master' into 0.11-fdo
Conflicts:
	gst/gst.c
	libs/gst/base/gstcollectpads.c
2011-03-28 20:11:20 +02:00
Wim Taymans
d82c8bd2af memory: port code to new buffer data API 2011-03-28 20:08:45 +02:00
Sebastian Dröge
489b94444e multiqueue: Don't leak objects when flushing after dequeueing and before pushing the object 2011-03-22 11:04:20 +01:00
Sebastian Dröge
383cac91b1 multiqueue: Increment unique item counter with atomic operations
Before it was only protected by the stream lock but every pad
has its own stream lock, making the protection rather useless.
2011-03-21 17:52:59 +01:00
Sebastian Dröge
9e36a51bac multiqueue: Unblock all waiting pads when shutting down 2011-03-21 17:17:22 +01:00
Sebastian Dröge
5b48fd5b24 multiqueue: Remove unused variable 2011-03-21 16:34:19 +01:00
Sebastian Dröge
14eb517849 multiqueue: Exit loop function if the pad is flushing
Fixes possible deadlocks when flushing an unlinked pad that waits
for other pads to advance.
2011-03-21 16:29:40 +01:00
Mark Nauwelaerts
e0f15e666a multiqueue: return upon input when already eos
... rather than hanging incoming thread (as considered full in eos).
2010-12-03 13:35:49 +01:00
Jan Schmidt
691807d634 multiqueue: Fix tracking of unlinked streams.
33082eb9e4 introduced a bug
preventing sparse unlinked streams from advancing properly,
leading to the queue blocking.

Fixes: #633176
2010-10-27 18:12:36 +02:00